Best coding practices: Difference between revisions

From AutoIt Wiki
Jump to navigation Jump to search
m (Enhanced examples)
 
(86 intermediate revisions by 11 users not shown)
Line 1: Line 1:
Outlined in this section is a detailed explanation of what is to be considered the best coding practices within AutoIt.
Outlined in this section is a detailed explanation of what are to be considered the good coding practices within AutoIt. These recommendations are based on accepted coding practices common to a number of other programming languages. You do not need to follow them, but it is recommended that you do.


'''Note''': You must use AutoIt v3.3.10.0 or above to run the examples below.


A few notes:
* You must use the latest version of AutoIt (v3.3.10.0 or above) to run the examples below.


__TOC__
== Using Functions ==
If a function sets the @error flag, you should always check it before using a return value - if @error indicates an error then the function return value is generally undefined.


__TOC__
Learn more about using Functions by reading "[https://www.autoitscript.com/autoit3/docs/function_notes.htm Function Notes]" from HelpFile.


== Names of Variables ==
== Names of Variables ==
The [http://en.wikipedia.org/wiki/Hungarian_notation Hungarian notation] is adopted however it's simplified and regroup all the types of numbers in one type.
The variable naming convention used in AutoIt is based on [http://en.wikipedia.org/wiki/Hungarian_notation Hungarian notation]. The prefix defines the logical data type rather than the physical data type: in this way, it gives a hint as to what the variable's purpose is, or what it represents. The prefix does not encode the actual data type: this occurs during assignment. See the table below for accepted standards.
 
Variables are initialized with the "default" value (or the most efficient value) of their type. See below in the table for specific value.


{| class="wikitable"
{| class="wikitable"
|-
|-
! prefix !! covering type !! initialization
! prefix !! covering type !! example
|-
|-
| i || Integer || $i = 0
| a || Arrays || $aArray[0]
|-
|-
| f || Floating point || $f = 0.0
| b || Booleans || $bBool = True
|-
|-
| n || General number (no preference) || $n = 0
| d || Binaries || $dBinary = Binary("0x80000000")
|-
|-
| a || Arrays || $a = 0 or $a[0]
| e || Constant variable || Local Const $eEulersConstant = 2.7182818284590452
|-
|-
| s || Strings (chars included) || $s = "" or $s = Null
| f || Floating point || $fFloat = 0.123
|-
|-
| b || Booleans || $b = False or $b = True
| h || Handles (and GUI handles) || $hGUI = GUICreate("My GUI")
|-
|-
| d || Binaries || $d = Binary("")
| i || Integer || $iInteger = 10
|-
|-
| id || An AutoIt controlid || $id = 0
| id || An AutoIt controlID || $idButton_Ok = GUICtrlCreateButton("OK", 5, 5)
|-
|-
| h || Handles (and GUI handles) || $h = 0
| m || Maps || $mMap[]
|-
|-
| fu || Functions || $fu = Null
| n || General number (no preference) || $nNumber = 0
|-
|-
| p || Pointers || $p = 0
| o || Objects || $oExcel = ObjCreate("Excel.Application")
|-
|-
| tag || Structures definition || $tag = 0
| p || Pointers || $pRect = DllStructGetPtr($tRECT)
|-
|-
| t || Structures || $t = 0
| s || Strings (chars included) || $sString = "Hello world"
|-
|-
| o || Objects || $o = 0
| t || Structures || $tSTRUCT = DllStructCreate($tagSTRUCT)
|-
|-
| v || Variant || $v = 0 or $v = "" (or $v = Null)
| tag || Structures definition || $tagDATE = "struct; word Year;word Month;word Day; endstruct"
|-
|-
| e || Enumerations || N/A
|v || Variant || $vData = ClipGet()
|-
| k || Keywords || $k = Default
|}
|}


 
Variables are named following this schema:
The variables are named following this schema:
{| class="wikitable"
{| class="wikitable"
|-
|-
! type (lower case) !! [optional] subtype (lower case) !! var name (first letter in upper case)
! dollar prefix !! type (lower case) !! [optional] subtype (lower case) !! var name (first letter in upper case)
|-
|-
| i || f || MyFlag
| $ || a || h || Handles
|}
|}


Example:
Examples:
<syntaxhighlight lang="autoit">
<syntaxhighlight lang="autoit">
; Assign a Local variable the number 5.
; Assign a local variable the integer 7
Local $iSomeVar = 5
Local $iWeekDays = 7


; Assign a Local variable the number 1.
; Assign a local variable the value of Pi
Local $ifMyFlag = 1
Local $fPi = 3.14159265358979


; Assign a Local variable an array of numbers.
; Assign a local variable an array of strings
Local $aiArray = 0
Local $asArray[7] = ['mon', 'tue', 'wed', 'thu', 'fri', 'sat', 'sun']


; Re-declare the array to size and fill it.
; Assign a local variable an array of numbers
Local $aiArray[3] = [0, 0.25, 3 / 4]
Local $anArray[4] = [0, 0.25, 3 / 4, 12]
</syntaxhighlight>
</syntaxhighlight>
<br />
== Variable Initialization ==
When initializing variables there are several points to consider. It is bad practice to hog memory by assigning data which is not immediately required. It is therefore recommended that you declare and initialize variables immediately prior to use. If you wish to assign a default value to a variable which you intend to overwrite later, then the data should be of the same (or the most logical representation of its) type and use as little memory as possible.
Examples:
<syntaxhighlight lang="autoit">
; Inconsistent data types are considered bad
Local $iInteger = "0"
Local $sString = False


; Correct initialization
Local $iInteger = 0
Local $sString = ''
</syntaxhighlight>
<br />


Always initialize a variable on it's declaration, and declare all the same type of variable on the same line.
In the following table, recommended default values are shown for each data type. Some data types have more than one possibile default value which can be used for initialization.
 
{| class="wikitable"
|-
! Default Value !! covering type
|-
| Binary("") || $d
|-
| "" || $s, $v
|-
| 0 || $a, $h, $i, $id, $m, $n, $o, $p, $t, $tag, $v
|-
| 0.0 || $f
|-
| Null || $o, $s, $v
|-
| False (or True) || $b
|}


<br />
Example:
Example:
<syntaxhighlight lang="autoit">
<syntaxhighlight lang="autoit">
;Bad
; Declare and initialize a variable with the recommended default value
Local $iSomeVar1, $aiArray = 0
Local $vUndefined = Null ; This does not require much memory
Local $iSomeVar2 = 5


;Good
; Some time later:
Local $iSomeVar1 = 0, $iSomeVar2 = 5
$vUndefined = 0xB0AD1CEA ; Assign an appropriate value as and when needed
Local $aiArray = 0
</syntaxhighlight>
</syntaxhighlight>
You can still categorize your variables and declare for example the $iSomeVar2 on another line.
<br />
 
To reduce bloat, multiple variables can be declared on a single line. When declaring multiple variables on the same line, it is generally recommended that you stick to declaring one data type on each line. The intention here is to make the code easier to follow and manage in a future, however the best layout will vary according to circumstance.


Example2:
Example:
<syntaxhighlight lang="autoit">
<syntaxhighlight lang="autoit">
#include <MsgBoxConstants.au3>
; Not recommended
Local $sString = "", $iInteger = 0, $asArray = ["a","b","c"] ; Mixed data types


Local $vValue ; Bad, this is initially blank.
; Recommended
Local $vVal = 0 ; Good
Local $iLeft = 10, $iTop = 10 ; Integers
Local $idButton_Go = GUICtrlCreateButton("Go", $iLeft, $iTop) ; ControlIds
Local $idButton_Quit = GUICtrlCreateButton("Quit", 50, 10) ; ControlIds
</syntaxhighlight>
<br />


MsgBox($MB_SYSTEMMODAL, '', '$vValue: ' & $vValue & @CRLF & '$vVal: ' & $vVal)
In some languages it is essential to initialize variables on declaration, but this is not the case with AutoIt. Regarding data type, variables declared without being initialized should be considered as being undefined.
 
<br />
; In C++ $vValue would display the previous value that was residing in the memory address $vValue points to. AutoIt
; is a little less forgiving in that it initialises the variable as being blank and doesn't throw any error, unlike some moder C++ compilers.
</syntaxhighlight>


== Scopes of Variables ==
== Scopes of Variables ==
To make the transition, the variables are also named according to their scope.
Variables should also be named according to their scope.
{| class="wikitable"
{| class="wikitable"
|-
|-
! Global UDF variable !! Global variable !! Local variable
! Global UDF variable !! Global variable !! Local variable
|-
|-
| $g__iSomeVar || $g_iSomeVar || $iSomeVar
| $__g_iSomeVar || $g_iSomeVar || $iSomeVar
|}
|}
With this method, you will avoid non wanted re-assignments.
With this method, you will avoid unwanted re-assignments.
 


Example:
Example:
Line 119: Line 151:
#include <MsgBoxConstants.au3>
#include <MsgBoxConstants.au3>


; Assign a Global variable the number 0.
; Assign a Global variable the number 0
Global $iSomeVar1 = 0
Global $iSomeVar1 = 0
; Assign a Global variable the number 5.
; Assign a Global variable the number 5
Global $_iSomeVar2 = 5
Global $g_iSomeVar2 = 5


SomeFunc()
SomeFunc()


Func SomeFunc()
Func SomeFunc()
; Assign Local variables respectively the numbers 3 and 4.
    ; Assign Local variables respectively the numbers 3 and 4
Local $iSomeVar1 = 3, $iSomeVar2 = 4
    Local $iSomeVar1 = 3, $iSomeVar2 = 4


; Note: The user inadvertently re-assigned the global variable $iSomeVar1, because this one is not named as "global".
    ; Note: The user inadvertently re-assigned the global variable $iSomeVar1, because this one is not named as "global"


; Display the value of $iSomeVar1.
    ; Display the value of $iSomeVar1
MsgBox($MB_SYSTEMMODAL, "", "Value of $iSomeVar1: " & $iSomeVar1)
    MsgBox($MB_SYSTEMMODAL, "", "Value of $iSomeVar1: " & $iSomeVar1)


; Display the value of $iSomeVar2.
    ; Display the value of $iSomeVar2
MsgBox($MB_SYSTEMMODAL, "", "Value of $iSomeVar2: " & $iSomeVar2)
    MsgBox($MB_SYSTEMMODAL, "", "Value of $iSomeVar2: " & $iSomeVar2)


; Display the value of $_iSomeVar2.
    ; Display the value of $g_iSomeVar2
MsgBox($MB_SYSTEMMODAL, "", "Value of $_iSomeVar2: " & $_iSomeVar2)
    MsgBox($MB_SYSTEMMODAL, "", "Value of $g_iSomeVar2: " & $g_iSomeVar2)
EndFunc
EndFunc
</syntaxhighlight>
</syntaxhighlight>


* A variable declared globally (with the Global keyword) is visible anywhere in the script.<br />Always declare your global variables in the global scope, not in a function. It will prevent another function from using it before its declaration and the declaration is implicit (see [[#jumpsec1|examples]]).


* A variable declared globally (with the Global keyword) is visible anywhere in the script.
* A variable declared locally (with the Local keyword), has a visibility which depends on the scope where it's declared.
Always declare your global variables in the global scope, not in the functions. It will prevent another function to use it before its declaration and the declaration is implicit (see [[#jumpsec1|examples]]).
:Declaration in the global scope: the variable is visible everywhere; declare it as Local if this one is only to be used in the same scope, i.e. outside of any functions. A variable declared as Local in the Global scope is still a Global variable, it's only for the sake of code clarity that you'd use the Local declaration in the Global scope.
 
* A variable declared locally (with the Local keyword), has a visibility which depends of the scope where it's declared.
:Declaration in the global scope: the variable is nonetheless visible everywhere; declare it as Local if this one is only used in the same scope.
:Declaration in a function: the variable is visible by the function itself and nowhere else.
:Declaration in a function: the variable is visible by the function itself and nowhere else.


Structure of a code scope:
Structure of a code scope:
<syntaxhighlight lang="autoit">
<syntaxhighlight lang="autoit">
; Global scope.
; Global scope


; Include the Constants file, it contains various constants; it's needed here for the $MB_SYSTEMMODAL flag of the MsgBox function).
; Include the Constants file, it contains various constants; it's needed here for the $MB_SYSTEMMODAL flag of the MsgBox function)
#include <MsgBoxConstants.au3>
#include <MsgBoxConstants.au3>


; This scope is either Global or Local, depending on where do you use the variables.
; This scope is either Global or Local, depending on where you use the variables


; Assign a Global variable the number 0 (which corresponds to an initialization of a variable number), its scope is Global because it's used at least in one function.
; Assign a Global variable the number 0 (which corresponds to an initialization of a variable number), its scope is Global because it's used in at least one function
Global $_iVar1 = 0
Global $g_iVar1 = 0


; Assign a Local variable the string "foo", its scope is Local because it's use is restricted to this scope.
; Assign a Local variable the string "foo", its scope is Local because its use is used only in this scope
Local $_sVar2 = "foo"
Local $sVar2 = "foo"


; Display the content of $_sVar2
; Display the content of $sVar2
MsgBox($MB_SYSTEMMODAL, "", "Value of $sVar2: " & $_sVar2)
MsgBox($MB_SYSTEMMODAL, "", "Value of $sVar2: " & $sVar2)


; Re-assign a Local variable the string returned by the function MyFunc.
; Re-assign a Local variable the string returned by the function MyFunc
$_sVar2 = MyFunc()
$sVar2 = MyFunc()


; Re-Display the content of $_sVar2
; Re-Display the content of $sVar2
MsgBox($MB_SYSTEMMODAL, "", "Value of $sVar2: " & $_sVar2)
MsgBox($MB_SYSTEMMODAL, "", "Value of $sVar2: " & $sVar2)


; Declare a function (its main utility is described later in Functions, we can see one here which is to create a Local scope).
; Declare a function (its main utility is described later in Functions, we can see one here which is to create a Local scope)
Func MyFunc()
Func MyFunc()
; Local scope.
    ; Local scope


; Display the content of $_iVar1.
    ; Display the content of $g_iVar1
MsgBox($MB_SYSTEMMODAL, "", "Value of $_iVar1: " & $_iVar1)
    MsgBox($MB_SYSTEMMODAL, "", "Value of $g_iVar1: " & $g_iVar1)


; Assign a Local variable the string "bar", its scope is Local because it's use is restricted to the function's scope.
    ; Assign a Local variable the string "bar", its scope is Local because its use is restricted to the function's scope
Local $sVar3 = "bar"
    Local $sVar3 = "bar"


; Display the content of $sVar3.
    ; Display the content of $sVar3
MsgBox($MB_SYSTEMMODAL, "", "Value of $sVar3: " & $sVar3)
    MsgBox($MB_SYSTEMMODAL, "", "Value of $sVar3: " & $sVar3)


; Return the $sVar3 content, it will be visible (if used) to the scope where the function is called.
    ; Return the $sVar3 content, it will be visible (if used) to the scope where the function is called
Return $sVar3
    Return $sVar3
EndFunc  ;==>MyFunc
EndFunc  ;==>MyFunc
</syntaxhighlight>
</syntaxhighlight>


Concerning the Dim keyword, its recommended usage is limited to empty an existing array (Example 1) or to redeclare a function parameter (Example 2).
Concerning the Dim keyword, its recommended usage is limited to empty an existing array (Example 1) or to redeclare a function parameter (Example 2).
Line 199: Line 227:
Example 1:
Example 1:
<syntaxhighlight lang="autoit">
<syntaxhighlight lang="autoit">
; Include the Array UDF, it's needed here for the _ArrayDisplay function.
; Include the Array UDF, it's needed here for the _ArrayDisplay function
#include <Array.au3>
#include <Array.au3>
   
   
; Assign a Local variable an array containing numbers with a size of 5.
; Assign a Local variable an array containing numbers with a size of 5
; Note than an array is based 0 index, to access the first element the code is: $aiArray[0].
; Note that an array is 0 based, so to access the first element the code is: $aiArray[0]
Local $aArray[5] = [1, 2, 3, 4, 5]
Local $aiArray[5] = [1, 2, 3, 4, 5]
   
   
; Display the contents.
; Display the contents
_ArrayDisplay($aArray)
_ArrayDisplay($aiArray)
   
   
; Empty the array (and keep its size).
; Empty the array (and keep its size)
Dim $aArray[5]
Dim $aiArray[5]
   
   
; Display the contents.
; Display the contents
_ArrayDisplay($aArray)
_ArrayDisplay($aiArray)
</syntaxhighlight>
</syntaxhighlight>
Remark: The variable type of the emptied array is a string, every variable non initialized is a string.
Remark: The variable type of an emptied array is a string, every non initialized variable is a string.


Example 2:
Example 2:
Line 221: Line 249:
#include <Array.au3>
#include <Array.au3>


; Call MyFunc with default parameters ($vParam1 = 0).
; Call MyFunc with default parameters ($vParam1 = 0)
MyFunc()
MyFunc()


; Assign a Local variable an array containing integers.
; Assign a Local variable an array containing integers
Local $aiArray[3] = [3, 4, 5]
Local $aiArray[3] = [3, 4, 5]
; Call MyFunc with $aiArray as parameter ($vParam1 = $aiArray).
; Call MyFunc with $aiArray as parameter ($vParam1 = $aiArray)
MyFunc($aiArray)
MyFunc($aiArray)


Func MyFunc($vParam1 = 0)
Func MyFunc($vParam1 = 0)
     ; If $vParam1 is NOT an array then redeclare it to an array.
     ; If $vParam1 is NOT an array then redeclare it to an array
     If IsArray($vParam1) = 0 Then
     If Not IsArray($vParam1) Then
         Dim $vParam1[3] = [0, 1, 2]
         Dim $vParam1[3] = [0, 1, 2]
     EndIf
     EndIf


     ; Display the array.
     ; Display the array
     _ArrayDisplay($vParam1)
     _ArrayDisplay($vParam1)
EndFunc  ;==>MyFunc
EndFunc  ;==>MyFunc
</syntaxhighlight>
</syntaxhighlight>


 
And for the ReDim keyword, limit its use to resize an array when you want to keep its content:
And for the ReDim keyword, limit its use to resize an array you want to keep its content:
<syntaxhighlight lang="autoit">
<syntaxhighlight lang="autoit">
; Include the Array UDF, it's needed here for the _ArrayDisplay function.
; Include the Array UDF, it's needed here for the _ArrayDisplay function
#include <Array.au3>
#include <Array.au3>
   
   
; Assign a Local variable an array containing numbers with a size of 5.
; Assign a Local variable an array containing numbers with a size of 5
; Note than an array is based 0 index, to access the first element the code is: $aiArray[0].
; Note than an array is 0 based, so to access the first element the code is: $aiArray[0]
Local $aArray[5] = [1, 2, 3, 4, 5]
Local $aArray[5] = [1, 2, 3, 4, 5]
   
   
; Display the contents.
; Display the contents
_ArrayDisplay($aArray)
_ArrayDisplay($aArray)
   
   
; Resize the array (and keep its content).
; Resize the array (and keep its content)
ReDim $aArray[3]
ReDim $aArray[3]
   
   
; Display the contents.
; Display the contents
_ArrayDisplay($aArray)
_ArrayDisplay($aArray)
</syntaxhighlight>
</syntaxhighlight>


Why using Dim over Local/Global is not always a good option:
Why using Dim over Local/Global is not always a good option:
Line 265: Line 291:
#include <MsgBoxConstants.au3>
#include <MsgBoxConstants.au3>
   
   
Dim $vVariableThatIsGlobal = "This is a variable that has ""Program Scope"" aka Global."
Dim $g_vVariableThatIsGlobal = "This is a variable that has ""Program Scope"" aka Global."
   
   
MsgBox($MB_SYSTEMMODAL, "", "An example of why Dim can cause more problems than solve them.")
MsgBox($MB_SYSTEMMODAL, "", "An example of why Dim can cause more problems than solve them.")
Line 272: Line 298:
   
   
Func Example()
Func Example()
MsgBox($MB_SYSTEMMODAL, "", $vVariableThatIsGlobal) ; That looks alright to me as it displays the following text: This is a variable that has "Program Scope" aka Global.
    MsgBox($MB_SYSTEMMODAL, "", $g_vVariableThatIsGlobal) ; That looks alright to me as it displays the following text: This is a variable that has "Program Scope" aka Global
   
   
Local $vReturn = SomeFunc() ; Call some random function.
    Local $vReturn = SomeFunc() ; Call some random function
   
   
MsgBox($MB_SYSTEMMODAL, $vReturn, $vVariableThatIsGlobal) ; The Global variable ($vVariableThatIsGlobal) changed because I totally forgot I had a duplicate variable name in "SomeFunc".
    MsgBox($MB_SYSTEMMODAL, $vReturn, $g_vVariableThatIsGlobal) ; The Global variable ($g_vVariableThatIsGlobal) changed because I totally forgot I had a duplicate variable name in "SomeFunc"
EndFunc  ;==>Example
EndFunc  ;==>Example
   
   
Func SomeFunc()
Func SomeFunc()
; This should create a variable in Local scope if the variable name doesn"t already exist.
    ; This should create a variable in Local scope if the variable name doesn"t already exist
; For argument sake I totally forgot that I declared a variable already with the same name.
    ; For argument sake I totally forgot that I declared a variable already with the same name
; Well I only want this to be changed in the function and not the variable at the top of the script.
    ; Well I only want this to be changed in the function and not the variable at the top of the script
; Should be OK right? Think again.
    ; Should be OK right? Think again
Dim $vVariableThatIsGlobal = ""
    Dim $g_vVariableThatIsGlobal = ""
   
   
For $i = 1 To 10
    For $i = 1 To 10
$vVariableThatIsGlobal &= $i ; This will return 12345678910 totally wiping the previous contents of $vVariableThatIsGlobal.
        $g_vVariableThatIsGlobal &= $i ; This will return 12345678910 totally wiping the previous contents of $g_vVariableThatIsGlobal
Next
    Next
Return $vVariableThatIsGlobal
    Return $g_vVariableThatIsGlobal
EndFunc  ;==>SomeFunc
EndFunc  ;==>SomeFunc
</syntaxhighlight>
</syntaxhighlight>


<span id="jumpsec1">Declaring Global variables in a Function is never a good idea:</span>
<span id="jumpsec1">Declaring Global variables in a Function is never a good idea:</span>
Line 298: Line 323:
#include <MsgBoxConstants.au3>
#include <MsgBoxConstants.au3>


; Calling Example() first will initialise the Global variable $vVariableThatIsGlobal and therefore calling SomeFunc() won't return an error.
; Calling Example() first will initialise the Global variable $g_vVariableThatIsGlobal and therefore calling SomeFunc() won't return an error
; Now look at Example 2.
; Now look at Example 2
Example()
Example()
   
   
Func Example()
Func Example()
; Declaring a variable in a function can cause serious problems, hence why all Global variables should be declared at the top of a script.
    ; Declaring a variable in a function can cause serious problems, hence why all Global variables should be declared at the top of a script
Global $vVariableThatIsGlobal = 'This is a variable that has ''File Scope'' aka Global.'
    Global $g_vVariableThatIsGlobal = 'This is a variable that has ''File Scope'' aka Global.'
SomeFunc()
    SomeFunc()
EndFunc  ;==>Example
EndFunc  ;==>Example
   
   
Func SomeFunc()
Func SomeFunc()
MsgBox($MB_SYSTEMMODAL, '', $vVariableThatIsGlobal) ; As the variable was initialised this will not return an error.
    MsgBox($MB_SYSTEMMODAL, '', $g_vVariableThatIsGlobal) ; As the variable was initialised this will not return an error
EndFunc  ;==>SomeFunc
EndFunc  ;==>SomeFunc
</syntaxhighlight>
</syntaxhighlight>
Line 317: Line 342:
#include <MsgBoxConstants.au3>
#include <MsgBoxConstants.au3>


; Calling SomeFunc() first will bypass the Global variable $vVariableThatIsGlobal being initialised and therefore AutoIt has no idea of what data the variable
; Calling SomeFunc() first will bypass the Global variable $g_vVariableThatIsGlobal being initialised and therefore AutoIt has no idea of what data the variable
; $vVariableThatIsGlobal contains.
; $g_vVariableThatIsGlobal contains
SomeFunc()
SomeFunc()
   
   
Func Example()
Func Example()
; Declaring a variable in a function can cause serious problems, hence why all Global variables should be declared at the top of a script.
    ; Declaring a variable in a function can cause serious problems, hence why all Global variables should be declared at the top of a script
Global $vVariableThatIsGlobal = 'This is a variable that has ''File Scope'' aka Global.'
    Global $g_vVariableThatIsGlobal = 'This is a variable that has ''File Scope'' aka Global.'
SomeFunc()
    SomeFunc()
EndFunc  ;==>Example
EndFunc  ;==>Example
   
   
Func SomeFunc()
Func SomeFunc()
MsgBox($MB_SYSTEMMODAL, '', $vVariableThatIsGlobal) ; As the variable wasn't initialised this will return an error of "variable used without being declared."
    MsgBox($MB_SYSTEMMODAL, '', $g_vVariableThatIsGlobal) ; As the variable wasn't initialised this will return an error of "variable used without being declared."
EndFunc  ;==>SomeFunc
EndFunc  ;==>SomeFunc
</syntaxhighlight>
</syntaxhighlight>


Declaring variables in loops (For, While, Do etc..) can have an affect on efficiency:
Declaring variables in loops (For, While, Do etc..) can have an affect on efficiency:
Line 337: Line 361:
#include <MsgBoxConstants.au3>
#include <MsgBoxConstants.au3>


; Declaring variables inside loops should be avoided as the variable is re-declared on each repetition.
; Declaring variables inside loops should be avoided as the variable is re-declared on each repetition
For $i = 1 To 10 ; $i is in 'loop scope.'
For $i = 1 To 10 ; $i is in 'loop scope.'
Local $iInt = $i
    Local $iInt = $i
Next
Next
MsgBox($MB_SYSTEMMODAL, '', $iInt) ; This will display 10.
MsgBox($MB_SYSTEMMODAL, '', $iInt) ; This will display 10
</syntaxhighlight>
</syntaxhighlight>


Line 347: Line 371:
#include <MsgBoxConstants.au3>
#include <MsgBoxConstants.au3>


; Declaring variables outside of loops is more efficent in the long run.
; Declaring variables outside of loops is more efficient in the long run
Local $iInt = 0
Local $iInt = 0
For $i = 1 To 10 ; $i is in 'loop scope.'
For $i = 1 To 10 ; $i is in 'loop scope.'
$iInt = $i
    $iInt = $i
Next
Next
MsgBox($MB_SYSTEMMODAL, '', $iInt) ; This will display 10.
MsgBox($MB_SYSTEMMODAL, '', $iInt) ; This will display 10
</syntaxhighlight>
</syntaxhighlight>


There is no requirement to declare the iteration count variable in a loop:
There is no requirement to declare the iteration count variable in a loop:
Line 361: Line 384:
Local Const $iCount = 99
Local Const $iCount = 99
Local $aArray[$iCount]
Local $aArray[$iCount]
For $i = 0 To UBound($iCount) - 1 ; $i is only used in the loop, so there is no requirement to declare it.
For $i = 0 To UBound($iCount) - 1 ; $i is only used in the loop, so there is no requirement to declare it
$aArray[$i] = $i
    $aArray[$i] = $i
Next
Next


Line 368: Line 391:
Local Const $iCount = 99
Local Const $iCount = 99
Local $aArray[$iCount]
Local $aArray[$iCount]
Local $i ; This is only used to store the iteration count value in the loop and therefore doesn't need to be declared. This is known as loop scope.
Local $i ; This is only used to store the iteration count value in the loop and therefore doesn't need to be declared.  
For $i = 0 To UBound($iCount) - 1
For $i = 0 To UBound($iCount) - 1
$aArray[$i] = $i
    $aArray[$i] = $i
Next
Next
</syntaxhighlight>
</syntaxhighlight>
Line 378: Line 401:


=== Const ===
=== Const ===
We won't talk about the advantages of a constant variable, they are neglibible (for your information, an autoit constant variable is marked as read-only and remains a variable as read-only when compiled).
We won't talk about the advantages of using a constant variable, they are neglibible (for your information, an AutoIt constant variable is marked as read-only and remains a read-only variable when compiled).
 
The Const keyword may be used in a first by some of you to avoid re-assignments.
The best way to use them is not this last case, the constants should be used for real static variables, meaning that their value won't change regardless to the instance of the program.


The Const keyword may be used first by some of you to avoid re-assignments.
The best way to use them is for real static values, meaning that these values won't change regardless of the instance of the program.


Example:
Example:
<syntaxhighlight lang="autoit">
<syntaxhighlight lang="autoit">
;Bad
; Not recommended
Local Const $hGUI = GUICreate("MyGUI")
Local Const $hGUI = GUICreate("MyGUI")
; The handle of the window is unique, it's generated by Windows and changes.
; The handle of the window is unique, it's generated by Windows and changes.
; To be exact: It is constant for the lifetime of the currently running script. But when you run the script again you get a different handle from Windows.


;Good
; Recommended
Local Const $iMyAge = 19
Local Const $fPi = 3.1415926 ; Archimedes' constant
</syntaxhighlight>
</syntaxhighlight>


=== Static ===
=== Static ===
Static variables are the solution to the global variables used in only one function.
Static variables are the solution to global variables being used in only one function.
e.g: Retain variable data once returned from a Function and only use that variable in that particular Function.
e.g: Retain variable data once returned from a Function and only use that variable in that particular Function.
<syntaxhighlight lang="autoit">
<syntaxhighlight lang="autoit">
Line 402: Line 424:


Func Example()
Func Example()
     SomeFunc() ; This will display a message box of 1, 1.
     SomeFunc() ; This will display a message box of 1, 1
     SomeFunc() ; This will display a message box of 1, 2.
     SomeFunc() ; This will display a message box of 1, 2
     SomeFunc() ; This will display a message box of 1, 3.
     SomeFunc() ; This will display a message box of 1, 3
EndFunc  ;==>Example
EndFunc  ;==>Example


Func SomeFunc()
Func SomeFunc()
     ; This initialises a Static variable in Local scope. When a variable is declared just in Local scope (within a Function,)
     ; This initialises a Static variable in Local scope. When a variable is declared just in Local scope (within a Function,)
     ; it's destroyed when the Function ends/returns. This isn't the case for a Static variable. The variable can't be
     ; it's destroyed when the Function ends/returns. This isn't the case for a Static variable. Also, the variable can't be
     ; accessed from anywhere else in the script apart from the Function it was declared in.
     ; accessed from anywhere else in the script apart from the Function it was declared in
     Local Static $vVariableThatIsStatic = 0
     Local Static $vVariableThatIsStatic = 0
     Local $vVariableThatIsLocal = 0
     Local $vVariableThatIsLocal = 0
     $vVariableThatIsLocal += 1 ; This will always be 1 as it was destroyed once returned from SomeFunc.
     $vVariableThatIsLocal += 1 ; This will always be 1 as it is destroyed once returned from SomeFunc
     $vVariableThatIsStatic += 1 ; This will increase by 1.
     $vVariableThatIsStatic += 1 ; This will increase by 1
     MsgBox(4096, $vVariableThatIsLocal, $vVariableThatIsStatic)
     MsgBox(4096, $vVariableThatIsLocal, $vVariableThatIsStatic)
EndFunc  ;==>SomeFunc
EndFunc  ;==>SomeFunc
</syntaxhighlight>
</syntaxhighlight>


=== Enum ===
=== Enum ===
Line 428: Line 449:


Func Example()
Func Example()
     ; Create variables in Local scope and enumerate through the variables. Default is to start from 0.
     ; Create variables in Local scope and enumerate through the variables. Default is to start from 0
     Local Enum $eCat, $eDog, $eMouse, $eHamster ; $eHamster is equal to the value 3, not 4.
     Local Enum $eCat, $eDog, $eMouse, $eHamster ; $eHamster is equal to the value 3, not 4


     ; Create an array in Local scope with 4 elements.
     ; Create an array in Local scope with 4 elements
     Local $aAnimalNames[4]
     Local $aAnimalNames[4]


     ; Assign each array element with the name of the respective animal. For example the name of the cat is Jasper.
     ; Assign each array element with the name of the respective animal. For example the name of the cat is Jasper
     $aAnimalNames[$eCat] = 'Jasper' ; $eCat is equal to 0, similar to using $aAnimalNames[0]
     $aAnimalNames[$eCat] = 'Jasper' ; $eCat is equal to 0, similar to using $aAnimalNames[0]
     $aAnimalNames[$eDog] = 'Beethoven' ; $eDog is equal to 1, similar to using $aAnimalNames[1]
     $aAnimalNames[$eDog] = 'Beethoven' ; $eDog is equal to 1, similar to using $aAnimalNames[1]
Line 440: Line 461:
     $aAnimalNames[$eHamster] = 'Fidget' ; $eHamster is equal to 3, similar to using $aAnimalNames[3]
     $aAnimalNames[$eHamster] = 'Fidget' ; $eHamster is equal to 3, similar to using $aAnimalNames[3]


     ; Display the values of the array.
     ; Display the values of the array
     MsgBox($MB_SYSTEMMODAL, '', '$aAnimalNames[$eCat] = ' & $aAnimalNames[$eCat] & @CRLF & _
     MsgBox($MB_SYSTEMMODAL, '', '$aAnimalNames[$eCat] = ' & $aAnimalNames[$eCat] & @CRLF & _
             '$aAnimalNames[$eDog] = ' & $aAnimalNames[$eDog] & @CRLF & _
             '$aAnimalNames[$eDog] = ' & $aAnimalNames[$eDog] & @CRLF & _
Line 447: Line 468:


     ; Sometimes using this approach for accessing an element is more practical than using a numerical value, due to the fact changing the index value of
     ; Sometimes using this approach for accessing an element is more practical than using a numerical value, due to the fact changing the index value of
     ; the enum constant has no affect on it's position in the array. Therefore changing the location of $eCat in the array is as simple as changing the order
     ; the enum constant has no effect on its position in the array. Therefore changing the location of $eCat in the array is as simple as changing the order
     ; it appears in the initial declaration e.g.
     ; it appears in the initial declaration e.g


     ; Local Enum $eDog, $eMouse, $eCat, $eHamster
     ; Local Enum $eDog, $eMouse, $eCat, $eHamster


     ; Now $eCat is the 2nd element in the array. If you were using numerical values, you would have to manually change all references of $aAnimalNames[0] to
     ; Now $eCat is the 2nd element in the array. If you were using numerical values, you would have to manually change all references of $aAnimalNames[0] to
     ; $aAnimalNames[2], as well as for the other elements which have now shifted.
     ; $aAnimalNames[2], as well as for the other elements which have now shifted
EndFunc  ;==>Example
EndFunc  ;==>Example
</syntaxhighlight>
</syntaxhighlight>


== Au3Check directive ==
== Au3Check directive ==
Line 467: Line 485:
#AutoIt3Wrapper_Au3Check_Parameters=-q -d -w 1 -w 2 -w 3 -w- 4 -w 5 -w 6 -w- 7
#AutoIt3Wrapper_Au3Check_Parameters=-q -d -w 1 -w 2 -w 3 -w- 4 -w 5 -w 6 -w- 7
</syntaxhighlight>
</syntaxhighlight>
 
|Note: this directive is only used if you've installed the full version of [https://www.autoitscript.com/cgi-bin/getfile.pl?../autoit3/scite/download/SciTE4AutoIt3.exe Scite4AutoIt3]
 
 


== Magic Numbers ==
== Magic Numbers ==
Line 480: Line 496:
In this example, the magic number is 262144 with the identifier being $MB_TOPMOST according to the helpfile.
In this example, the magic number is 262144 with the identifier being $MB_TOPMOST according to the helpfile.


The corrected example:
<syntaxhighlight lang="autoit">
#include <MsgBoxConstants.au3>
MsgBox($MB_TOPMOST, "Magic Numbers", "It's Adventure Time!")
</syntaxhighlight>


Example 2:
Example 2:
Line 485: Line 506:
; Imagine you're a new user to AutoIt and you come across this code, where would you find -3, -4 or -5 in the help file?
; Imagine you're a new user to AutoIt and you come across this code, where would you find -3, -4 or -5 in the help file?
; Since AutoIt is relatively a new concept to you, your first thought isn't to search through all the include files, I mean
; Since AutoIt is relatively a new concept to you, your first thought isn't to search through all the include files, I mean
; why would you, the help file is there for a reason.
; why would you, the help file is there for a reason
Example()
Example()


Line 497: Line 518:
     While 1
     While 1
         Switch GUIGetMsg()
         Switch GUIGetMsg()
             Case -3 ; Doesn't really tell much about what it does.
             Case -3 ; Doesn't really tell much about what it does
                 ExitLoop
                 ExitLoop


Line 519: Line 540:
     Local $hGUI = GUICreate('')
     Local $hGUI = GUICreate('')
     GUICtrlCreateLabel('Why magic numbers are counter productive.', 5, 5)
     GUICtrlCreateLabel('Why magic numbers are counter productive.', 5, 5)
     GUICtrlSetState(Default, $GUI_DISABLE) ; Better, this is documented in the help file.
     GUICtrlSetState(Default, $GUI_DISABLE) ; Better, this is documented in the help file
     GUICtrlSetState(Default, $GUI_ENABLE) ; Better, this is documented in the help file.
     GUICtrlSetState(Default, $GUI_ENABLE) ; Better, this is documented in the help file
     GUISetState(@SW_SHOW, $hGUI)
     GUISetState(@SW_SHOW, $hGUI)


     While 1
     While 1
         Switch GUIGetMsg()
         Switch GUIGetMsg()
             Case $GUI_EVENT_CLOSE ; Better, this is documented in the help file. Ah, it's the close action.
             Case $GUI_EVENT_CLOSE ; Better, this is documented in the help file. Ah, it's the close action
                 ExitLoop
                 ExitLoop


             Case $GUI_EVENT_MINIMIZE, $GUI_EVENT_RESTORE ; Better, this is documented in the help file.
             Case $GUI_EVENT_MINIMIZE, $GUI_EVENT_RESTORE ; Better, this is documented in the help file
                 MsgBox($MB_SYSTEMMODAL, '', 'Do something when this action takes place.') ; Better, this is documented in the help file.
                 MsgBox($MB_SYSTEMMODAL, '', 'Do something when this action takes place.')  


         EndSwitch
         EndSwitch
Line 539: Line 560:


[http://en.wikipedia.org/wiki/Magic_number_(programming) Magic number (programming)]
[http://en.wikipedia.org/wiki/Magic_number_(programming) Magic number (programming)]


== Include-once directive ==
== Include-once directive ==
This one is designed for standard includes and UDFs, it's highly recommended to use it.
This one is designed for standard includes and UDFs, it's highly recommended to use it only for that.


Those includes may be included in more than one script of your project because they are needed for some includes or your script itself.
Those includes may be used in more than one file of your project because they are needed for some includes or your script itself.
In that case, the code will be duplicated which is not a good thing especially if you have (and it's mainly the case) constants declared in those files, in so far as the constants cannot be redeclared/reassigned; same thing for functions.
In that case, the code would be duplicated, which is not a good thing especially if you have constants declared in those files, in so far as the constants cannot be redeclared/reassigned you will get error messages about trying to redeclare them; same thing for functions, you can't use a function name more than once.


 
Put the directive at the top of your UDF (library) to avoid it from being included more than once :
Put the directive in top of your UDF (library) to avoid itself to be included more than once :
<syntaxhighlight lang="autoit">
<syntaxhighlight lang="autoit">
#include-once
#include-once
</syntaxhighlight>
</syntaxhighlight>
For discussion please visit: [http://www.autoitscript.com/forum/index.php?showtopic=146866 Forum: Good coding practices in AutoIt]

Latest revision as of 09:56, 29 October 2020

Outlined in this section is a detailed explanation of what are to be considered the good coding practices within AutoIt. These recommendations are based on accepted coding practices common to a number of other programming languages. You do not need to follow them, but it is recommended that you do.

Note: You must use AutoIt v3.3.10.0 or above to run the examples below.


Using Functions

If a function sets the @error flag, you should always check it before using a return value - if @error indicates an error then the function return value is generally undefined.

Learn more about using Functions by reading "Function Notes" from HelpFile.

Names of Variables

The variable naming convention used in AutoIt is based on Hungarian notation. The prefix defines the logical data type rather than the physical data type: in this way, it gives a hint as to what the variable's purpose is, or what it represents. The prefix does not encode the actual data type: this occurs during assignment. See the table below for accepted standards.

prefix covering type example
a Arrays $aArray[0]
b Booleans $bBool = True
d Binaries $dBinary = Binary("0x80000000")
e Constant variable Local Const $eEulersConstant = 2.7182818284590452
f Floating point $fFloat = 0.123
h Handles (and GUI handles) $hGUI = GUICreate("My GUI")
i Integer $iInteger = 10
id An AutoIt controlID $idButton_Ok = GUICtrlCreateButton("OK", 5, 5)
m Maps $mMap[]
n General number (no preference) $nNumber = 0
o Objects $oExcel = ObjCreate("Excel.Application")
p Pointers $pRect = DllStructGetPtr($tRECT)
s Strings (chars included) $sString = "Hello world"
t Structures $tSTRUCT = DllStructCreate($tagSTRUCT)
tag Structures definition $tagDATE = "struct; word Year;word Month;word Day; endstruct"
v Variant $vData = ClipGet()

Variables are named following this schema:

dollar prefix type (lower case) [optional] subtype (lower case) var name (first letter in upper case)
$ a h Handles

Examples:

; Assign a local variable the integer 7
Local $iWeekDays = 7

; Assign a local variable the value of Pi
Local $fPi = 3.14159265358979

; Assign a local variable an array of strings
Local $asArray[7] = ['mon', 'tue', 'wed', 'thu', 'fri', 'sat', 'sun']

; Assign a local variable an array of numbers
Local $anArray[4] = [0, 0.25, 3 / 4, 12]


Variable Initialization

When initializing variables there are several points to consider. It is bad practice to hog memory by assigning data which is not immediately required. It is therefore recommended that you declare and initialize variables immediately prior to use. If you wish to assign a default value to a variable which you intend to overwrite later, then the data should be of the same (or the most logical representation of its) type and use as little memory as possible.

Examples:

; Inconsistent data types are considered bad
Local $iInteger = "0"
Local $sString = False

; Correct initialization
Local $iInteger = 0
Local $sString = ''


In the following table, recommended default values are shown for each data type. Some data types have more than one possibile default value which can be used for initialization.

Default Value covering type
Binary("") $d
"" $s, $v
0 $a, $h, $i, $id, $m, $n, $o, $p, $t, $tag, $v
0.0 $f
Null $o, $s, $v
False (or True) $b


Example:

; Declare and initialize a variable with the recommended default value
Local $vUndefined = Null ; This does not require much memory

; Some time later:
$vUndefined = 0xB0AD1CEA ; Assign an appropriate value as and when needed


To reduce bloat, multiple variables can be declared on a single line. When declaring multiple variables on the same line, it is generally recommended that you stick to declaring one data type on each line. The intention here is to make the code easier to follow and manage in a future, however the best layout will vary according to circumstance.

Example:

; Not recommended
Local $sString = "", $iInteger = 0, $asArray = ["a","b","c"] ; Mixed data types

; Recommended
Local $iLeft = 10, $iTop = 10 ; Integers
Local $idButton_Go = GUICtrlCreateButton("Go", $iLeft, $iTop) ; ControlIds
Local $idButton_Quit = GUICtrlCreateButton("Quit", 50, 10) ; ControlIds


In some languages it is essential to initialize variables on declaration, but this is not the case with AutoIt. Regarding data type, variables declared without being initialized should be considered as being undefined.

Scopes of Variables

Variables should also be named according to their scope.

Global UDF variable Global variable Local variable
$__g_iSomeVar $g_iSomeVar $iSomeVar

With this method, you will avoid unwanted re-assignments.

Example:

#include <MsgBoxConstants.au3>

; Assign a Global variable the number 0
Global $iSomeVar1 = 0
; Assign a Global variable the number 5
Global $g_iSomeVar2 = 5

SomeFunc()

Func SomeFunc()
    ; Assign Local variables respectively the numbers 3 and 4
    Local $iSomeVar1 = 3, $iSomeVar2 = 4

    ; Note: The user inadvertently re-assigned the global variable $iSomeVar1, because this one is not named as "global"

    ; Display the value of $iSomeVar1
    MsgBox($MB_SYSTEMMODAL, "", "Value of $iSomeVar1: " & $iSomeVar1)

    ; Display the value of $iSomeVar2
    MsgBox($MB_SYSTEMMODAL, "", "Value of $iSomeVar2: " & $iSomeVar2)

    ; Display the value of $g_iSomeVar2
    MsgBox($MB_SYSTEMMODAL, "", "Value of $g_iSomeVar2: " & $g_iSomeVar2)
EndFunc
  • A variable declared globally (with the Global keyword) is visible anywhere in the script.
    Always declare your global variables in the global scope, not in a function. It will prevent another function from using it before its declaration and the declaration is implicit (see examples).
  • A variable declared locally (with the Local keyword), has a visibility which depends on the scope where it's declared.
Declaration in the global scope: the variable is visible everywhere; declare it as Local if this one is only to be used in the same scope, i.e. outside of any functions. A variable declared as Local in the Global scope is still a Global variable, it's only for the sake of code clarity that you'd use the Local declaration in the Global scope.
Declaration in a function: the variable is visible by the function itself and nowhere else.

Structure of a code scope:

; Global scope

; Include the Constants file, it contains various constants; it's needed here for the $MB_SYSTEMMODAL flag of the MsgBox function)
#include <MsgBoxConstants.au3>

; This scope is either Global or Local, depending on where you use the variables

; Assign a Global variable the number 0 (which corresponds to an initialization of a variable number), its scope is Global because it's used in at least one function
Global $g_iVar1 = 0

; Assign a Local variable the string "foo", its scope is Local because its use is used only in this scope
Local $sVar2 = "foo"

; Display the content of $sVar2
MsgBox($MB_SYSTEMMODAL, "", "Value of $sVar2: " & $sVar2)

; Re-assign a Local variable the string returned by the function MyFunc
$sVar2 = MyFunc()

; Re-Display the content of $sVar2
MsgBox($MB_SYSTEMMODAL, "", "Value of $sVar2: " & $sVar2)

; Declare a function (its main utility is described later in Functions, we can see one here which is to create a Local scope)
Func MyFunc()
    ; Local scope

    ; Display the content of $g_iVar1
    MsgBox($MB_SYSTEMMODAL, "", "Value of $g_iVar1: " & $g_iVar1)

    ; Assign a Local variable the string "bar", its scope is Local because its use is restricted to the function's scope
    Local $sVar3 = "bar"

    ; Display the content of $sVar3
    MsgBox($MB_SYSTEMMODAL, "", "Value of $sVar3: " & $sVar3)

    ; Return the $sVar3 content, it will be visible (if used) to the scope where the function is called
    Return $sVar3
EndFunc   ;==>MyFunc

Concerning the Dim keyword, its recommended usage is limited to empty an existing array (Example 1) or to redeclare a function parameter (Example 2).

Example 1:

; Include the Array UDF, it's needed here for the _ArrayDisplay function
#include <Array.au3>
 
; Assign a Local variable an array containing numbers with a size of 5
; Note that an array is 0 based, so to access the first element the code is: $aiArray[0]
Local $aiArray[5] = [1, 2, 3, 4, 5]
 
; Display the contents
_ArrayDisplay($aiArray)
 
; Empty the array (and keep its size)
Dim $aiArray[5]
 
; Display the contents
_ArrayDisplay($aiArray)

Remark: The variable type of an emptied array is a string, every non initialized variable is a string.

Example 2:

#include <Array.au3>

; Call MyFunc with default parameters ($vParam1 = 0)
MyFunc()

; Assign a Local variable an array containing integers
Local $aiArray[3] = [3, 4, 5]
; Call MyFunc with $aiArray as parameter ($vParam1 = $aiArray)
MyFunc($aiArray)

Func MyFunc($vParam1 = 0)
    ; If $vParam1 is NOT an array then redeclare it to an array
    If Not IsArray($vParam1) Then
        Dim $vParam1[3] = [0, 1, 2]
    EndIf

    ; Display the array
    _ArrayDisplay($vParam1)
EndFunc   ;==>MyFunc

And for the ReDim keyword, limit its use to resize an array when you want to keep its content:

; Include the Array UDF, it's needed here for the _ArrayDisplay function
#include <Array.au3>
 
; Assign a Local variable an array containing numbers with a size of 5
; Note than an array is 0 based, so to access the first element the code is: $aiArray[0]
Local $aArray[5] = [1, 2, 3, 4, 5]
 
; Display the contents
_ArrayDisplay($aArray)
 
; Resize the array (and keep its content)
ReDim $aArray[3]
 
; Display the contents
_ArrayDisplay($aArray)

Why using Dim over Local/Global is not always a good option:

#include <MsgBoxConstants.au3>
 
Dim $g_vVariableThatIsGlobal = "This is a variable that has ""Program Scope"" aka Global."
 
MsgBox($MB_SYSTEMMODAL, "", "An example of why Dim can cause more problems than solve them.")
 
Example()
 
Func Example()
    MsgBox($MB_SYSTEMMODAL, "", $g_vVariableThatIsGlobal) ; That looks alright to me as it displays the following text: This is a variable that has "Program Scope" aka Global
 
    Local $vReturn = SomeFunc() ; Call some random function
 
    MsgBox($MB_SYSTEMMODAL, $vReturn, $g_vVariableThatIsGlobal) ; The Global variable ($g_vVariableThatIsGlobal) changed because I totally forgot I had a duplicate variable name in "SomeFunc"
EndFunc   ;==>Example
 
Func SomeFunc()
    ; This should create a variable in Local scope if the variable name doesn"t already exist
    ; For argument sake I totally forgot that I declared a variable already with the same name
    ; Well I only want this to be changed in the function and not the variable at the top of the script
    ; Should be OK right? Think again
    Dim $g_vVariableThatIsGlobal = ""
 
    For $i = 1 To 10
        $g_vVariableThatIsGlobal &= $i ; This will return 12345678910 totally wiping the previous contents of $g_vVariableThatIsGlobal
    Next
    Return $g_vVariableThatIsGlobal
EndFunc   ;==>SomeFunc

Declaring Global variables in a Function is never a good idea:

#include <MsgBoxConstants.au3>

; Calling Example() first will initialise the Global variable $g_vVariableThatIsGlobal and therefore calling SomeFunc() won't return an error
; Now look at Example 2
Example()
 
Func Example()
    ; Declaring a variable in a function can cause serious problems, hence why all Global variables should be declared at the top of a script
    Global $g_vVariableThatIsGlobal = 'This is a variable that has ''File Scope'' aka Global.'
    SomeFunc()
EndFunc   ;==>Example
 
Func SomeFunc()
    MsgBox($MB_SYSTEMMODAL, '', $g_vVariableThatIsGlobal) ; As the variable was initialised this will not return an error
EndFunc   ;==>SomeFunc

Example 2:

#include <MsgBoxConstants.au3>

; Calling SomeFunc() first will bypass the Global variable $g_vVariableThatIsGlobal being initialised and therefore AutoIt has no idea of what data the variable
; $g_vVariableThatIsGlobal contains
SomeFunc()
 
Func Example()
    ; Declaring a variable in a function can cause serious problems, hence why all Global variables should be declared at the top of a script
    Global $g_vVariableThatIsGlobal = 'This is a variable that has ''File Scope'' aka Global.'
    SomeFunc()
EndFunc   ;==>Example
 
Func SomeFunc()
    MsgBox($MB_SYSTEMMODAL, '', $g_vVariableThatIsGlobal) ; As the variable wasn't initialised this will return an error of "variable used without being declared."
EndFunc   ;==>SomeFunc

Declaring variables in loops (For, While, Do etc..) can have an affect on efficiency:

#include <MsgBoxConstants.au3>

; Declaring variables inside loops should be avoided as the variable is re-declared on each repetition
For $i = 1 To 10 ; $i is in 'loop scope.'
    Local $iInt = $i
Next
MsgBox($MB_SYSTEMMODAL, '', $iInt) ; This will display 10
#include <MsgBoxConstants.au3>

; Declaring variables outside of loops is more efficient in the long run
Local $iInt = 0
For $i = 1 To 10 ; $i is in 'loop scope.'
    $iInt = $i
Next
MsgBox($MB_SYSTEMMODAL, '', $iInt) ; This will display 10

There is no requirement to declare the iteration count variable in a loop:

; Correct
Local Const $iCount = 99
Local $aArray[$iCount]
For $i = 0 To UBound($iCount) - 1 ; $i is only used in the loop, so there is no requirement to declare it
    $aArray[$i] = $i
Next

; Incorrect
Local Const $iCount = 99
Local $aArray[$iCount]
Local $i ; This is only used to store the iteration count value in the loop and therefore doesn't need to be declared. 
For $i = 0 To UBound($iCount) - 1
    $aArray[$i] = $i
Next

As you can see, there is the Const keyword in the example, we are going to talk about it.

Const, Static, Enum

Const

We won't talk about the advantages of using a constant variable, they are neglibible (for your information, an AutoIt constant variable is marked as read-only and remains a read-only variable when compiled).

The Const keyword may be used first by some of you to avoid re-assignments. The best way to use them is for real static values, meaning that these values won't change regardless of the instance of the program.

Example:

; Not recommended
Local Const $hGUI = GUICreate("MyGUI")
; The handle of the window is unique, it's generated by Windows and changes.
; To be exact: It is constant for the lifetime of the currently running script. But when you run the script again you get a different handle from Windows.

; Recommended
Local Const $fPi = 3.1415926 ; Archimedes' constant

Static

Static variables are the solution to global variables being used in only one function. e.g: Retain variable data once returned from a Function and only use that variable in that particular Function.

Example()

Func Example()
    SomeFunc() ; This will display a message box of 1, 1
    SomeFunc() ; This will display a message box of 1, 2
    SomeFunc() ; This will display a message box of 1, 3
EndFunc   ;==>Example

Func SomeFunc()
    ; This initialises a Static variable in Local scope. When a variable is declared just in Local scope (within a Function,)
    ; it's destroyed when the Function ends/returns. This isn't the case for a Static variable. Also, the variable can't be
    ; accessed from anywhere else in the script apart from the Function it was declared in
    Local Static $vVariableThatIsStatic = 0
    Local $vVariableThatIsLocal = 0
    $vVariableThatIsLocal += 1 ; This will always be 1 as it is destroyed once returned from SomeFunc
    $vVariableThatIsStatic += 1 ; This will increase by 1
    MsgBox(4096, $vVariableThatIsLocal, $vVariableThatIsStatic)
EndFunc   ;==>SomeFunc

Enum

This statement is often practical in certain situations:

#include <MsgBoxConstants.au3>

Example()

Func Example()
    ; Create variables in Local scope and enumerate through the variables. Default is to start from 0
    Local Enum $eCat, $eDog, $eMouse, $eHamster ; $eHamster is equal to the value 3, not 4

    ; Create an array in Local scope with 4 elements
    Local $aAnimalNames[4]

    ; Assign each array element with the name of the respective animal. For example the name of the cat is Jasper
    $aAnimalNames[$eCat] = 'Jasper' ; $eCat is equal to 0, similar to using $aAnimalNames[0]
    $aAnimalNames[$eDog] = 'Beethoven' ; $eDog is equal to 1, similar to using $aAnimalNames[1]
    $aAnimalNames[$eMouse] = 'Pinky' ; $eMouse is equal to 2, similar to using $aAnimalNames[2]
    $aAnimalNames[$eHamster] = 'Fidget' ; $eHamster is equal to 3, similar to using $aAnimalNames[3]

    ; Display the values of the array
    MsgBox($MB_SYSTEMMODAL, '', '$aAnimalNames[$eCat] = ' & $aAnimalNames[$eCat] & @CRLF & _
            '$aAnimalNames[$eDog] = ' & $aAnimalNames[$eDog] & @CRLF & _
            '$aAnimalNames[$eMouse] = ' & $aAnimalNames[$eMouse] & @CRLF & _
            '$aAnimalNames[$eHamster] = ' & $aAnimalNames[$eHamster] & @CRLF)

    ; Sometimes using this approach for accessing an element is more practical than using a numerical value, due to the fact changing the index value of
    ; the enum constant has no effect on its position in the array. Therefore changing the location of $eCat in the array is as simple as changing the order
    ; it appears in the initial declaration e.g

    ; Local Enum $eDog, $eMouse, $eCat, $eHamster

    ; Now $eCat is the 2nd element in the array. If you were using numerical values, you would have to manually change all references of $aAnimalNames[0] to
    ; $aAnimalNames[2], as well as for the other elements which have now shifted
EndFunc   ;==>Example

Au3Check directive

As you may know (and we hope), the Au3Check tool checks your code for syntax errors, variables used without being declared etc. which is a good thing to fix your script.

With the official custom directive used to check the helpfile examples/includes, you can apply the good coding practices listed above:

#AutoIt3Wrapper_Au3Check_Parameters=-q -d -w 1 -w 2 -w 3 -w- 4 -w 5 -w 6 -w- 7

|Note: this directive is only used if you've installed the full version of Scite4AutoIt3

Magic Numbers

Magic numbers are arbitrary numbers interspersed throughout a program's source code which do not have an associated identifier. The downside to this is not being able to derive a meaning from the number.

For example:

MsgBox(262144, "Magic Numbers", "It's Adventure Time!")

In this example, the magic number is 262144 with the identifier being $MB_TOPMOST according to the helpfile.

The corrected example:

#include <MsgBoxConstants.au3>
MsgBox($MB_TOPMOST, "Magic Numbers", "It's Adventure Time!")

Example 2:

; Imagine you're a new user to AutoIt and you come across this code, where would you find -3, -4 or -5 in the help file?
; Since AutoIt is relatively a new concept to you, your first thought isn't to search through all the include files, I mean
; why would you, the help file is there for a reason
Example()

Func Example()
    Local $hGUI = GUICreate('')
    GUICtrlCreateLabel('Why magic numbers are counter productive.', 5, 5)
    GUICtrlSetState(Default, 128) ; Does this hide, show or disable it?
    GUICtrlSetState(Default, 64) ; Does this hide, show or disable it?
    GUISetState(@SW_SHOW, $hGUI)

    While 1
        Switch GUIGetMsg()
            Case -3 ; Doesn't really tell much about what it does
                ExitLoop

            Case -4, -5 ; Again, no idea what these are. MouseMove? MouseClick? Restore?
                MsgBox(4096, '', 'Do something when this action takes place.')

        EndSwitch
    WEnd

    GUIDelete($hGUI)
EndFunc   ;==>Example

Did you understand the numbers were these:

#include <GUIConstantsEx.au3>

Example()

Func Example()
    Local $hGUI = GUICreate('')
    GUICtrlCreateLabel('Why magic numbers are counter productive.', 5, 5)
    GUICtrlSetState(Default, $GUI_DISABLE) ; Better, this is documented in the help file
    GUICtrlSetState(Default, $GUI_ENABLE) ; Better, this is documented in the help file
    GUISetState(@SW_SHOW, $hGUI)

    While 1
        Switch GUIGetMsg()
            Case $GUI_EVENT_CLOSE ; Better, this is documented in the help file. Ah, it's the close action
                ExitLoop

            Case $GUI_EVENT_MINIMIZE, $GUI_EVENT_RESTORE ; Better, this is documented in the help file
                MsgBox($MB_SYSTEMMODAL, '', 'Do something when this action takes place.') 

        EndSwitch
    WEnd

    GUIDelete($hGUI)
EndFunc   ;==>Example

Magic number (programming)

Include-once directive

This one is designed for standard includes and UDFs, it's highly recommended to use it only for that.

Those includes may be used in more than one file of your project because they are needed for some includes or your script itself. In that case, the code would be duplicated, which is not a good thing especially if you have constants declared in those files, in so far as the constants cannot be redeclared/reassigned you will get error messages about trying to redeclare them; same thing for functions, you can't use a function name more than once.

Put the directive at the top of your UDF (library) to avoid it from being included more than once :

#include-once

For discussion please visit: Forum: Good coding practices in AutoIt