#Region ;**** Directives created by AutoIt3Wrapper_GUI ****
#AutoIt3Wrapper_outfile=testing stdout5.exe
#AutoIt3Wrapper_Run_Tidy=y
#EndRegion ;**** Directives created by AutoIt3Wrapper_GUI ****
; http://www.autoitscript.com/forum/index.php?s=&showtopic=12828&view=findpost&p=88305
; A script for AutoIt3. Jon is The Man.
; Script generated by AutoBuilder 0.5 Prototype. CyberSlug rocks.
; Edited with SciTE and Tidy. Go JdeB.

#include <GuiConstants.au3>

Dim $ourProcess
Dim $username
Dim $password
Dim $loop


GUICreate("STDIO Window", 425, 322, (@DesktopWidth - 425) / 2, (@DesktopHeight - 362) / 2, $WS_OVERLAPPEDWINDOW + $WS_VISIBLE + $WS_CLIPSIBLINGS)

; Create a read-only edit control
$eOutput = GUICtrlCreateEdit("", 0, 10, 423, 250, BitOR($ES_WANTRETURN, $WS_VSCROLL, $WS_HSCROLL, $ES_AUTOVSCROLL, $ES_AUTOHSCROLL, $ES_READONLY))
; Ping spawn button
$bSSH = GUICtrlCreateButton("SSH", 260, 285, 60, 20)
; Notepad spawn button
;$bNotepad = GuiCtrlCreateButton("Notepad", 180, 285, 60, 20)
; Exit button
$bExit = GUICtrlCreateButton("Exit", 340, 285, 60, 20)

; Show the GUI window
GUISetState()
JDs_debug("Vnc2Me - GUI Starting")

; Loop and update the edit control unitl we hit EOF (and get an error)
While 1
	; We assign the process ID of ping to $ourProcess below...
	If $ourProcess Then
		; Calling StdoutRead like this returns the characters waiting to be read
		$ReadCharsWaiting = StdoutRead($ourProcess, 0, 1)
		; Calling StderrRead like this returns the characters waiting to be read
		If @error = -1 Then
			JDs_debug("Vnc2Me - STDOUT unable to be read")
			; Set $ourProcess to zero so we don't try to read nothing...
			$ourProcess = 0
			MsgBox(0, "App Exited", "Process has exited...")
			; ContinueLoop means "don't exit the While loop, just start over without doing anything else"
			ContinueLoop
		EndIf
		$ErrCharsWaiting = StderrRead($ourProcess, 0, 1)
		; If there was an error reading, the most likely cause us that the child process has quit...
		If @error = -1 Then
			JDs_debug("Vnc2Me - STDERR unable to be read")
			; Set $ourProcess to zero so we don't try to read nothing...
			$ourProcess = 0
			MsgBox(0, "App Exited", "Process has exited...")
			; ContinueLoop means "don't exit the While loop, just start over without doing anything else"
			ContinueLoop
		EndIf

		; Since we got here there was no error, but were there characters to be read?
		If $ReadCharsWaiting Then
			; Read all available
			$currentRead = StdoutRead($ourProcess)
			$Vnc2MeReadUsername = StringRegExp($currentRead, ".*ogin.*")
			$Vnc2MeReadPassword = StringRegExp($currentRead, ".*assword.*")

			If $Vnc2MeReadUsername = 1 Then
				JDs_debug("Vnc2Me - AUTH - 'login' detected")
				Vnc2MeUsername()
				ContinueLoop
			ElseIf $Vnc2MeReadPassword = 1 Then
				JDs_debug("Vnc2Me - AUTH - 'password' detected")
				Vnc2MePassword()
				ContinueLoop
			Else
				; Add what we read to the editbox
				GUICtrlSetData($eOutput, $currentRead, 1)
				JDs_debug("Vnc2Me - STDOUT updates fed to GUI")
			EndIf
			Sleep(100)
		ElseIf $ErrCharsWaiting Then
			; Read all available
			$currentErr = StderrRead($ourProcess)
			$Vnc2MeErrHostKey = StringRegExp($currentErr, ".*host key is not cached.*")
			If $Vnc2MeErrHostKey = 1 Then
				JDs_debug("Vnc2Me - STDERR Host key no cached")
				Vnc2MeAddHostKey()
				;				GUICtrlSetData($eOutput, $currentErr, 1)
				ContinueLoop
			Else
				GUICtrlSetData($eOutput, $currentErr, 1)
				JDs_debug("Vnc2Me - STDERR updates fed to GUI")
			EndIf
		EndIf ; => no program output waiting.
	Else ; => $ourProcess not exist.
		JDs_debug("Vnc2Me - SSH process not started")
		Sleep(200)
	EndIf ; => End $ourProcess


	; Get any messages from the GUI
	$msg = GUIGetMsg()
	Select
		Case $msg = $GUI_EVENT_CLOSE
			; X button on window was clicked
			JDs_debug("Vnc2Me - GUI exiting (windows closed)")
			Vnc2MeExit()
		Case $msg = $bExit
			; Exit button was clicked
			JDs_debug("Vnc2Me - GUI exiting (exit button)")
			Vnc2MeExit()
		Case $msg = $bSSH
			; SSH button was clicked
			JDs_debug("Vnc2Me - SSH button pressed")
			; Run child process and provide console i/o for it.
			;	1 ($STDIN_CHILD) = Provide a handle to the child's STDIN stream
			;	2 ($STDOUT_CHILD) = Provide a handle to the child's STDOUT stream
			;	4 ($STDERR_CHILD) = Provide a handle to the child's STDERR stream
			$ourProcess = Run("jdsplink.exe -C -L 25501:127.0.0.1:5500 -R 5500:127.0.0.1:5900 somehost.com -v", @ScriptDir, @SW_MINIMIZE, 7)
			JDs_debug("Vnc2Me - SSH process started")
			;		Case $msg = $bNotepad
			;			JDs_debug("Vnc2Me - Notepad button pressed")
			;			; Notepad button was clicked
			;			Run("notepad.exe", @SystemDir)
		Case Else
			;;;
	EndSelect
WEnd
JDs_debug("Vnc2Me - ")

Func Vnc2MeUsername($username = "")
	;if $username not passed in func call, ask for it.
	If $username = "" Then
		$username = InputBox("username", "Enter username")
		If @error = 1 Then
			Exit
		EndIf
	EndIf
	;writes "login"
	JDs_debug("Vnc2Me - AUTH - Passing username")
	StdinWrite($ourProcess, $username & " " & @CR)
EndFunc   ;==>Vnc2MeUsername

Func Vnc2MePassword($password = "")
	;if $password not passed in func call, ask for it.
	If $password = "" Then
		$password = InputBox("password", "Enter password for " & $username, '', '*')
		If @error = 1 Then
			Exit
		EndIf
	EndIf
	;writes "password"
	JDs_debug("Vnc2Me - AUTH - Passing password")
	StdinWrite($ourProcess, $password & " " & @CR)
EndFunc   ;==>Vnc2MePassword

Func Vnc2MeAddHostKey()
	;Add Host key to knownhosts
	JDs_debug("Vnc2Me - STDERR found")
	$msgbox = MsgBox(4, "The host is not cached", "This Host is not known, do you want to add it to known hosts ???")
	If $msgbox = 6 Then
		StdinWrite($ourProcess, "y " & @CR)
	EndIf
EndFunc   ;==>Vnc2MeAddHostKey

Func Vnc2MeExit()
	StdinWrite($ourProcess, "exit" & @CR)
	Sleep(500)
	ProcessClose("jdsplink.exe")
	Exit
EndFunc   ;==>Vnc2MeExit

Func JDs_debug($msg)
	DllCall("kernel32.dll", "none", "OutputDebugString", "str", $msg)
EndFunc   ;==>JDs_debug