Jump to content

There's nothing here yet

  • Similar Content

    • By nacerbaaziz
      hello sirs, i've created a tool to the blind users, this tool helps the blind to listen to a audio effect when moving between the GUIs controls on they computers
      where this tool can get the class for the current focus control and play a sound from a folder
      i've added all the knowne classes, but i found some problems i hope any one can help me.
      this is the code that i created

      #include <WinAPISys.au3> Global $h_CurrentHWNDFocus = "", $h_CurrentControlHWNDFocus = "" AdlibRegister("WindowAudioFocus", 50) Func WindowAudioFocus()     Local $h_NewHWNDFocus = WinGetHandle("[active]", "")     Local $h_NewControlHWNDFocus = ControlGetFocus($h_NewHWNDFocus, "")     If ($h_NewHWNDFocus = $h_CurrentHWNDFocus) And ($h_NewControlHWNDFocus = $h_CurrentControlHWNDFocus) Then Return 0     AdlibUnRegister("WindowAudioFocus")     If Not ($h_NewHWNDFocus = $h_CurrentHWNDFocus) Then         SoundPlay(@ScriptDir & "\focus_Audio\WindowChanged.wav")     Else         Switch _WinAPI_GetClassName(ControlGetHandle($h_NewHWNDFocus, "", $h_NewControlHWNDFocus))             Case "Button", "Start", "TrayButton", "TrayShowDesktopButtonWClass", "sbutton", "CirrussButton", "ODbcButton", "ThunderRTCommandButton", "ThunderSSOption", "ThunderSSCommand", "ThunderCommandButton", "ThunderRT6CommandButton", "ThunderRT5CommandButton", "TButton", "TBitBtn", "TAdvGlowButton", "ButtonWndClass", "afx:0:376:baa946", "_AOL_Button"                 If _IsCheckBox(ControlGetHandle($h_NewHWNDFocus, "", $h_NewControlHWNDFocus)) Then                     SoundPlay(@ScriptDir & "\focus_Audio\checkBox.wav")                 ElseIf _IsRadio(ControlGetHandle($h_NewHWNDFocus, "", $h_NewControlHWNDFocus)) Then                     SoundPlay(@ScriptDir & "\focus_Audio\radio.wav")                 Else                     SoundPlay(@ScriptDir & "\focus_Audio\button.wav")                 EndIf             Case "ComboBox", "ComboBoxEx32", "MSOBALLOONREComboBox20W", "REComboBox20W", "ThunderComboBox", "ThunderDriveListBox", "ThunderRT6ComboBox", "TORComboEdit", "TCombobox", "TComboBoxEx", "TORComboBox", "TColorBox", "TNFComboBox", "Internet Explorer_TridentCmbobx", "ComboWndClass", "_AOL_ComboBox", "ThunderRT5ComboBox", "ComboLBox"                 SoundPlay(@ScriptDir & "\focus_Audio\list.wav")             Case "Edit", "SearchBox", "TChatRichEdit", "_WwN", "_WwO", "RichEdit20A", "RichEdit20WPT", "RICHEDIT60W", "OKttbx", "RichEditA", "ThunderTextBox", "ThunderRT6TextBox", "ThunderRT5TextBox", "TEdit", "TRichEdit", "TRichEditViewer", "TMemo", "TInplaceEditList", "TLabeledEdit", "TMaskEdit", "TDateTimePicker", "TRichEdit", "TCaptionMemo", "TAddictRichEdit", "TCaptionEdit", "RichTextWndClass", "TextWndClass", "PasswordWndClass", "TextAreaWndClass", "MSWorksDoc", "_AOL_Edit", "SysDateTimePick32"                 SoundPlay(@ScriptDir & "\focus_Audio\edit.wav")             Case "ListBox", "ComboLBox", "REListBox20W", "SUPERGRID", "OUTEXVLB", "WMSUIVLB", "SchdmapiVLB", "VLBClass", "ThunderDirListBox", "ThunderFileListBox", "ThunderListBox", "ThunderRT6ListBox", "ThunderRT5ListBox", "TListbox", "TValueListEditor", "TORCalendar", "TColorListBox", "TCheckListBox", "Internet Explorer_TridentLstBox", "ListBoxWndClass", "ListWndClass", "hh_kwd_vlist", "afx:8:376:0:946", "_AOL_ListBox", "_AOL_Tree", ""                 SoundPlay(@ScriptDir & "\focus_Audio\List.wav")             Case "SysListView32", "OpenListView", "wuDuiListView", "ListView20WndClass", "TcxGridSite", "TListView", "TSystemListView", "ListViewWndClass", ""                 SoundPlay(@ScriptDir & "\focus_Audio\ListView.wav")             Case "SysTreeView32", "SearchTreeList", "FeatureTree", "TreeView20WndClass", "TSystemTreeView", "TTreeView", ""                 SoundPlay(@ScriptDir & "\focus_Audio\TreeView.wav")             Case Else                 SoundPlay(@ScriptDir & "\focus_Audio\focus.wav")         EndSwitch     EndIf     $h_CurrentHWNDFocus = $h_NewHWNDFocus     $h_CurrentControlHWNDFocus = $h_NewControlHWNDFocus     AdlibRegister("WindowAudioFocus", 50)     Return 1 EndFunc   ;==>WindowAudioFocus Func _IsCheckBox($ctrl_hwnd)     $Style = _WinAPI_GetWindowLong($ctrl_hwnd, $GWL_STYLE)     Return BitAND($Style, $BS_CHECKBOX) = $BS_CHECKBOX EndFunc   ;==>_IsCheckBox Func _IsRadio($ctrl_hwnd)     $Style = _WinAPI_GetWindowLong($ctrl_hwnd, $GWL_STYLE)     Return BitAND($Style, $BS_AUTORADIOBUTTON) = $BS_AUTORADIOBUTTON EndFunc   ;==>_IsRadio
      what i need from you is :
      play a sound when a menu item focus, that sound named menu.wav
      play a sound named items.wav when the users move on list box items or list view or treeview items or a combobox items
      please if can any one help me i'll very happy
      thanks on advance
    • By PeterVerbeek
      In this post I take the opportunity to show the awesome capabilities of AutoIt and its libraries. My open source project Peace is a long running AutoIt based app located on SourceForge. It provides users with a system-wide equalizer and effects machine. It's an interface using the power of Equalizer APO, an audio processing object software. Peace has been download over 1,100,000 times by various kind of users. Amongst others it gives them possibilities like these:
      Hearing impaired - Amplify the gain of frequencies which are impaired. Home Theatre - Create Equalizer presets for watching movies and listening to music. Music lovers & audiophiles - Create presets for listening to music on their high quality speakers and headphones. Gamers - Enhance frequencies to get an edge over other gamers. Headphones - Improve the sound quality of cheap headphones and get the max out of expensive ones. Bass lovers - Boost low frequencies for extra bass. Voice - Make a microphone sound better and improve the voice, for instance for YouTube usage. Low audio - Boost low audio of an input source to a comfortable level. This list covers the main needs of the Peace user. Many people have contacted me over the years asking for new features and telling me how they use Peace for their (sometimes specific) needs.  I was able to use AutoIt and its libraries for all of their needs. So what are the main features of Peace?
      Equalize your computer audio by using up to 31 sliders. Support of equalizing 9 speakers : left/right, center, subwoofer, left/right rear, left/right side. Per slider a filter can be chosen such as peak, low/high pass, shelving. The graph windows shows your equalization so you see exactly what you're doing. Apply an effect such as crossfeed simple/Jan Meier/Chu Moy, stereo balance, bass/treble, upmix/downmix, channel routing. Save presets (called configurations) and activate by mouse click, hotkey, desktop shortcut or Peace system tray. Select a target device to equalize, microphone as input can also be equalized. Automate: you can let Peace automatically activate presets on a switch to another device and another process. Peace is available in these languages: English, Czech, Deutsch, Français, Italiano, Nederlands, Pусский, Українська So who am I? I'm a Dutch programmer who happens the stumble upon AutoIt 5 years ago and created a small Equalizer interface app of less than 400 program lines with it. Nowadays Peace has grown to more than 17,000 lines as many features were added. Although Peace is open source, the program code isn't of the best possible quality. The reason being that I didn't expect it to become so popular. It caught me by supprise. I've created a Library of functions called Pal which quality is up to the AutoIt community standard as counterpart to the Peace program code.
      I want to state here that AutoIt is a mature program language as Peace obviously shows. I wish it to be used more extensively for professional or semi-professional apps. In my view AutoIt deserves a place amongst the major programming languages for Windows computers.
      Regards,
      Peter Verbeek







    • By TheSaint
      This is my latest project, which I have been working on for a few days now, so this is kind of hot off the press. However, in reality, I have been working on some element of this for years. Some of you may remember a huge project of mine (Audio DVD Producer + Chat Blog Screenshots) that I worked on a good while back? Well, this one is very much related, and very much simpler in scope. That other project by the way, has been basically stalled for a good length of time now. Not because I never finished it, but because the end result was not as great as I hoped. I may share the files for it one day. I may even start working on it again one day, though this latest project kind of makes much of it redundant for my aims.
      Anyway, this project. I have a good bunch of DTS-CDs, from same or other sources (i.e. DVD). You can read more about what a DTS-CD is here, but the short of it, is that you cannot play them on a normal CD player, as you will just get noise. Many if not most DVD or Blu-ray players can play the embedded DTS data in the otherwise empty CD tracks. Further to that, a DTS-CD is essentially a compressed PCM or WAV file for all intents and purposes ... to keep things simple. So a 6 Channel (5.1) track takes up roughly the same amount of bytes as a normal stereo CD track ... so 6 channels for the price of 2.
      Up until recently, the best device for me to play the DTS-CDs on, as CDs, is my PS3. It plays them faithfully (reader issues aside) and has nice visuals. It is also my most convenient DVD/Blu-ray player, so a heap of hassle to play on one of my regular players, and not much success with the Xbox 360 ... at least with burnt backup copies.
      DTS-CDs are also kind of old school, and been superseded by the more superior lossless DVD Audio, Super CD and now Blu-ray Audio discs. That kind of makes them rare now and essentially irreplaceable, so being a wise man, I store them safely and only play backup discs.
      Playing discs though is kind of limited, and to be honest a pain, as my PS3 spits the dummy on some days, with the reader not being what its should be ... or perhaps poorly calibrated. So for a long time now, I have been wanting to use the backup files instead. Unfortunately, while I can play them fine on my PC (foobar2000 + DTS plugin), that is not where I want to listen to them. Until recently, neither my NeoTV 550 hardware player or my Laser one, have been very good at playing the files, and the PS3 even worse with its lack of file support. Back when I first investigated all this, and tried a bunch of things, and didn't yet have the Laser (4k Android) player, I did attempt to go the FLAC route. However, I was left unsatisfied, as my NeoTV did not support CUE files and M3U playlist files are a bit of a hassle ... and no help, when I have a single album file with cue index points for each track ... which many of my DTS-CD rips were ... especially for albums that have one track running into the next ... live albums too. The other issues for me with FLAC, were the artwork (album cover) and TAGS (details for each track - Title, Artist, Album, Year, etc), which I could not get to work.
      So, moving forward to recently. I played a DTS-CD on the PS3 the other day, and if there is one things I hate, it is a playing issue when I am in the midst of enjoying a nice piece of music. The PS3 is not very forgiving and just aborts play. I am not very forgiving of the PS3, so decided to investigate FLACs again. Now perhaps something has changed, since I last tried ... or I just wasn't on the ball. Anyway, to cut a long story a bit shorter, I loaded a DTS WAV file in foobar2000, and ripped it to a FLAC file. I then tried that file on my NeoTV 550 hardware player, and it played fine ... and some tags were visible, which surprised me. So I thought it was worth looking into further. I also tried the file on my Laser hardware player, with the Kodi (XBMC) Android app, but alas, while the Tags and Artwork worked well, all I got was noise ... and same for every other app I tried.
      Now don't ask me why I thought to try FLAC on its own, using the FLAC Frontend program initially, but I did ... and it recognized the tracks as 5.1. With foobar2000, I'd selected the decoder for DTS files when converting to FLAC, as I thought it was required. I hadn't at that stage used flac.exe by itself, but I decided to investigate the TAG command-line options and also noticed you could embed a picture, which I was keen as mustard to try. So I set up a BAT file and gave it a whirl.
      Now the results on my NeoTV 550 hardware player, were brilliant - Sound, Tags and Artwork were as I wanted. I decided to update Kodi at that point. Then, I tried my Laser hardware player again, but still no joy. I then did some online research and read about how to get it all working. Alas, I had mixed results. The foobar2000 ripped file worked, but the one I did with the BAT file did not. Not being keen to rip everything via foobar2000 menus, and wanting to code a quicker batch solution myself, I first attempted to see what command-line options I could use for foobar. That was a dismal failure, so I then revisited some of the programs I had used way back when with DTS WAV based files, and eventually discovered that 'valdec.exe' from the AC3Filter tools collection, gave the compatibility I needed. So I put my WAV or DTS files through that program first, then converted them to FLAC.
      Now the files played with DTS surround sound, on both my hardware players. They also play gapless, so I split album length files into separate track files, which avoids the CUE and M3U issues. That said, a joined M3U file for something like a (separate folders) double album, plays great with Kodi.
      So of course, I just had to whip up a program ... with drag and drop of course.
      And that program has steadily been growing & changing, and is where I want it now, at v1.5.
      Screenshots further below.
      REQUIRED COMPONENTS
      Most programs (if not all) can be obtained from VideoHelp, but here are some alternative sites to source them. The 'flac.exe' program is definitely required, and 'valdec.exe' if you want maximum compatibility support for a wider range of players.
      [flac.exe]
      https://xiph.org/flac/
      https://xiph.org/flac/download.html
      https://ftp.osuosl.org/pub/xiph/releases/flac/
      https://ftp.osuosl.org/pub/xiph/releases/flac/flac-1.3.1-win.zip
      [valdec.exe] [found in the AC3Filter tools collection]
      http://www.ac3filter.net/wiki/AC3Filter_tools (Info only, downloads no longer work)
      https://web.archive.org/web/*/http://www.ac3filter.net/wiki/AC3Filter_tools
      https://web.archive.org/web/20130623004920/http://www.ac3filter.net:80/wiki/Download_AC3Filter_tools
      If The Wayback Machine options fail, then go to VideoHelp (maybe go there anyway).
      https://www.videohelp.com/software/AC3-Filter/old-versions
      NOTE - The AC3Filter site has loads of information, which could help you enable other players aside from those below.
      RECOMMENDED PLAYERS
      PC = foobar2000 + DTS plugin component.
      Android Device = Kodi (XBMC) app with DTS etc enabled with passthrough.
      NOTE - foobar2000 with plugin, will play even those not processed with 'valdec.exe'. My 'NeoTV 550' hardware player does the same. My 'Laser' (Android device) with Kodi just emits noise with the FLAC files, if not processed with 'valdec.exe'.
      RECOMMENDED DTS-CD RIPPERS
      http://www.imgburn.com/
      http://www.exactaudiocopy.de/
      OTHER LINKS
      This one of mine tells you a lot more about DTS-CDs, including ripping or burning.
      https://forum.doom9.org/showthread.php?t=172484
      SCREENSHOTS
         

      P.S. I made a brilliant discovery today. Whereas in the past, with PS3 etc, I could not listen to my DTS-CDs via my Surround Sound Headphones, I now can with these files. So it is well worth playing those CDs as files, just for that benefit alone. Overall though, I have future proofed my collection.
    • By CYCho
      zPlayer is the name I used when I introduced the early version of this palyer in my blog back in early 2009 and, therefore, has nothing to do with the mobile media player of the same name which started marketing in 2015.
      After I retired from active duty in 2002 I spent much time listening to music. First I started with CD's and LP's, then quickly moved on to mp3 files. I converted many of my CD's to mp3 and I collected many more from various sources which were freely available at the time. As the number of my mp3 files grew, I put them in folders according to their genres and my favorite classifications. I mainly used Windows Media Player to listen to them and I slowly began to dislike wmp because it had massive user interface while I just wanted to listen to music in the background while I was doing other work in the foreground, hopping between folders from time to time. It was the time I was beginning to learn AutoIt and I thought I should make my own player with AutoIt. Coming from a sales career with no experience in programming, it was not an easy task. Somehow, after about 2 years of learning and trying, I had my own audio player which worked with only hotkeys without any graphical interface. I gave it to some of my friends who were not as computer-savvy as I. They liked it but definitely wanted something to clcik with mouse. So I came up with very rude gui which took a form similar to what it is now.
      The attached source files include one au3 file, one icon file and 14 jpg files. The jpg files are used for drawing a graphical player and are fileinstalled in @DocumentsCommonDir folder. This player uses WMPlayer.OCX as its engine and supports all audio file formats supported by wmp and additional codecs installed. I would like to thank @Bilgus for kind answers to my questions and would appreciate it if anyone could review the code and give me any suggestion. This player works for me, but I don't know whether the code is presentable as an example. I am posting this here with a hope to learn much from AutoIt community.
      PS: 1. An error (Variable used before declaration) was reported and corrected - 02:00 hours GMT,  March 14, 2019
            2. An error in tray menu was corrected -10:00 hours GMT, March14, 2019
            3. AutoIt3Wrapper_Au3Check_Parameters definition was added at the top of the code and all ensuing errors were corrected. - 00:10 hours GMT, March 16 2019
            4. Some features were added. - 10:30 hours GMT, March 18, 2019
                a. Jumping to new play-back position in a file
                b. Support for a manually made playlist
                c. Ctrl+Alt+h hotkey to trigger a help message box
            5. The minimum resizing width of playlist window was set at 450. - 01:10 hours GMT, March 23, 2019
            6. Problems associated with actions taken while in 'paused' status was addressed. - 07:40 GMT, April 12, 2019
            7. An error was found and corrected in restoring previous play-back environment when the mode was 'Shuffled.' - 11:00 GMT, April 17, 2019


      Please see Downloads section of this forum for source code files.
       
×
×
  • Create New...