Jump to content

_StringEncrypt different language ?

namedrisk

By namedrisk,
in AutoIt General Help and Support

 Share

Recommended Posts

namedrisk Seeker

namedrisk

Posted
Posted (edited)

Hi,

I am currently using _INetGetSource to authenticate a user on my autoit code but if my user is using another language for example chinese, it seems to get the data from the page in chinese.

Is there a way to grab it in english ? like an HTTP header or something ?

UPDATE

i've done some more tests and it sounds to be a problem with _StringEncrypt while trying to decrypt something on chinese language ... ;) dont know how to solve this

Edited by namedrisk
Link to comment
Share on other sites
PsaltyDS Universalist

PsaltyDS

Posted
Posted

The data you are getting is probably not encrypted with AutoIt's _StringEncrypt(), and so it can't be decrypted with it. A binary RC4() would be more likely to work, assuming you correctly handle the Unicode after it was decrypted. Now that assumes RC4() was used at all, and maybe it wasn't.

So, how did you determine the encryption used? Nothing else works until you have the right answer to that question.

;)

Valuater's AutoIt 1-2-3, Class... Is now in Session!For those who want somebody to write the script for them: RentACoder"Any technology distinguishable from magic is insufficiently advanced." -- Geek's corollary to Clarke's law
Link to comment
Share on other sites
namedrisk Seeker

namedrisk

Posted
  • Author
Posted (edited)

The data you are getting is probably not encrypted with AutoIt's

It is.

#include <String.au3>
While 1
    $this = InputBox("Enter text to encrypt", "!!")
    $this = _StringEncrypt(1, $this, "mysecretkeyhere", 1)
    ClipPut ($this)
    MsgBox(0, "hi", "The encrypted text is on your clipboard.")
WEnd

_StringEncrypt(0, "mysecretkeyhere", $line)

It works over more then 50 computers with different language sets but if it is chinese it won't decode it...

Thanks for coming by ;)

Edited by namedrisk
Link to comment
Share on other sites
namedrisk Seeker

namedrisk

Posted
  • Author
Posted

sorry to push it i am sure it may hard for you guys to test it on different languages etc ... but would there be another simple method to enc dec something like this one that would perhaps workout in diff languages ? it seems that it does not work with german, rus, dutch, chinese so far.

Link to comment
Share on other sites
PsaltyDS Universalist

PsaltyDS

Posted
Posted (edited)

Find SkinnyWhiteGuy's RC4(), or the new Crypto.au3 UDF that ships with AutoIt.

The point is to use an actual binary encryption/decryption that doesn't internally do string conversions (as _StringEncrypt() does) which is where language compatibility gets screwed up.

;)

Edited by PsaltyDS
Valuater's AutoIt 1-2-3, Class... Is now in Session!For those who want somebody to write the script for them: RentACoder"Any technology distinguishable from magic is insufficiently advanced." -- Geek's corollary to Clarke's law
Link to comment
Share on other sites
  • Developers
Jos Universalist

Jos

Posted
  • Developers
Posted

sorry to push it i am sure it may hard for you guys to test it on different languages etc ... but would there be another simple method to enc dec something like this one that would perhaps workout in diff languages ? it seems that it does not work with german, rus, dutch, chinese so far.

I can assure you it works with Dutch but I know that there is a problem with Unicode

http://www.autoitscript.com/forum/index.php?showtopic=62757&view=findpost&p=544033

SciTE4AutoIt3 Full installer Download page   - Beta files       Read before posting     How to post scriptsource   Forum etiquette  Forum Rules 
 
Live for the present,
Dream of the future,
Learn from the past.  :)

Link to comment
Share on other sites
namedrisk Seeker

namedrisk

Posted
  • Author
Posted (edited)

Well right now i am with a client using dutch client trying to find out a fix for it that is why i also putted it on the list ...

anyway thanks both of you i will try what you said Psalty and report how it goes.

I have found this 2 topics of the needed files if i got it right:

http://www.autoitscript.com/forum/index.php?showtopic=11513&hl=Cryptoau3&st=0

http://www.autoitscript.com/forum/index.php?showtopic=10813&st=0

I ran thru all the posts and everything and found a working version of the 2 files that does not give me any error for running but it does not work either as it ends without giving proper error message to autoit.

i will keep looking on it but if you guys could give me a hand i would appreciate

Edited by namedrisk
Link to comment
Share on other sites
monoceres Universalist

monoceres

Posted
Posted

_StringEncrypt is deprecated and not very good anyway.

If you wish to use encryption with standard autoit then I recommend to use the Crypt UDF (like PsaltyDS said) instead, it ships with latest autoit (3.3.2.0) and is safer, faster and more flexible than _StringEncrypt.

Broken link? PM me and I'll send you the file!

Link to comment
Share on other sites
namedrisk Seeker

namedrisk

Posted
  • Author
Posted

i am using the follow function to overcome the problem and it works wonderfull:

Func __StringEncrypt($i_Encrypt, $s_EncryptText, $s_EncryptPassword, $i_EncryptLevel = 1, $i_Flag = 1)
    If $i_Encrypt <> 0 And $i_Encrypt <> 1 Then
        SetError(1)
        Return ''
    ElseIf $s_EncryptText = '' Or $s_EncryptPassword = '' Then
        SetError(1)
        Return ''
    Else
        If Number($i_EncryptLevel) <= 0 Or Int($i_EncryptLevel) <> $i_EncryptLevel Then $i_EncryptLevel = 1
        Local $b_EncryptText
        Local $b_EncryptPassword
        Local $v_EncryptModified
        Local $i_EncryptCountH
        Local $i_EncryptCountG
        Local $v_EncryptSwap
        Local $av_EncryptBox[256][2]
        Local $i_EncryptCountA
        Local $i_EncryptCountB
        Local $i_EncryptCountC
        Local $i_EncryptCountD
        Local $i_EncryptCountE
        Local $v_EncryptCipher
        Local $v_EncryptCipherBy
        $b_EncryptText = StringToBinary($s_EncryptText, $i_Flag)
        $b_EncryptPassword = StringToBinary($s_EncryptPassword, $i_Flag)
        If $i_Encrypt = 1 Then
            For $i_EncryptCountF = 0 To $i_EncryptLevel Step 1
                $i_EncryptCountG = ''
                $i_EncryptCountH = ''
                $v_EncryptModified = Binary('')
                For $i_EncryptCountG = 1 To BinaryLen($b_EncryptText)
                    If $i_EncryptCountH = BinaryLen($b_EncryptPassword) Then
                        $i_EncryptCountH = 1
                    Else
                        $i_EncryptCountH += 1
                    EndIf
                    $v_EncryptModified = Binary($v_EncryptModified) & Binary('0x' & Hex(BitXOR(BinaryMid($b_EncryptText, $i_EncryptCountG, 1), BinaryMid($b_EncryptPassword, $i_EncryptCountH, 1), 255),2))
                Next
                $b_EncryptText = $v_EncryptModified
                $i_EncryptCountA = ''
                $i_EncryptCountB = 0
                $i_EncryptCountC = ''
                $i_EncryptCountD = ''
                $i_EncryptCountE = ''
                $v_EncryptCipherBy = ''
                $v_EncryptCipher = ''
                $v_EncryptSwap = ''
                $av_EncryptBox = ''
                Local $av_EncryptBox[256][2]
                For $i_EncryptCountA = 0 To 255
                    $av_EncryptBox[$i_EncryptCountA][1] = Dec(StringTrimLeft(BinaryMid($b_EncryptPassword, Mod($i_EncryptCountA, BinaryLen($b_EncryptPassword)) + 1, 1),2))
                    $av_EncryptBox[$i_EncryptCountA][0] = $i_EncryptCountA
                Next
                For $i_EncryptCountA = 0 To 255
                    $i_EncryptCountB = Mod(($i_EncryptCountB + $av_EncryptBox[$i_EncryptCountA][0] + $av_EncryptBox[$i_EncryptCountA][1]), 256)
                    $v_EncryptSwap = $av_EncryptBox[$i_EncryptCountA][0]
                    $av_EncryptBox[$i_EncryptCountA][0] = $av_EncryptBox[$i_EncryptCountB][0]
                    $av_EncryptBox[$i_EncryptCountB][0] = $v_EncryptSwap
                Next
                For $i_EncryptCountA = 1 To BinaryLen($b_EncryptText)
                    $i_EncryptCountC = Mod(($i_EncryptCountC + 1), 256)
                    $i_EncryptCountD = Mod(($i_EncryptCountD + $av_EncryptBox[$i_EncryptCountC][0]), 256)
                    $i_EncryptCountE = $av_EncryptBox[Mod(($av_EncryptBox[$i_EncryptCountC][0] + $av_EncryptBox[$i_EncryptCountD][0]), 256) ][0]
                    $v_EncryptCipherBy = BitXOR(BinaryMid($b_EncryptText, $i_EncryptCountA, 1), $i_EncryptCountE)
                    $v_EncryptCipher = Binary($v_EncryptCipher) & Binary('0x' & Hex($v_EncryptCipherBy, 2))
                Next
                $b_EncryptText = StringTrimLeft($v_EncryptCipher,2)
            Next
        Else
            $b_EncryptText = $s_EncryptText
            For $i_EncryptCountF = 0 To $i_EncryptLevel Step 1
                $b_EncryptText = Binary('0x' & $b_EncryptText)
                $i_EncryptCountB = 0
                $i_EncryptCountC = ''
                $i_EncryptCountD = ''
                $i_EncryptCountE = ''
                $v_EncryptCipherBy = ''
                $v_EncryptCipher = ''
                $v_EncryptSwap = ''
                $av_EncryptBox = ''
                Local $av_EncryptBox[256][2]
                For $i_EncryptCountA = 0 To 255
                    $av_EncryptBox[$i_EncryptCountA][1] = Dec(StringTrimLeft(BinaryMid($b_EncryptPassword, Mod($i_EncryptCountA, BinaryLen($b_EncryptPassword)) + 1, 1),2))
                    $av_EncryptBox[$i_EncryptCountA][0] = $i_EncryptCountA
                Next
                For $i_EncryptCountA = 0 To 255
                    $i_EncryptCountB = Mod(($i_EncryptCountB + $av_EncryptBox[$i_EncryptCountA][0] + $av_EncryptBox[$i_EncryptCountA][1]), 256)
                    $v_EncryptSwap = $av_EncryptBox[$i_EncryptCountA][0]
                    $av_EncryptBox[$i_EncryptCountA][0] = $av_EncryptBox[$i_EncryptCountB][0]
                    $av_EncryptBox[$i_EncryptCountB][0] = $v_EncryptSwap
                Next
                For $i_EncryptCountA = 1 To BinaryLen($b_EncryptText)
                    $i_EncryptCountC = Mod(($i_EncryptCountC + 1), 256)
                    $i_EncryptCountD = Mod(($i_EncryptCountD + $av_EncryptBox[$i_EncryptCountC][0]), 256)
                    $i_EncryptCountE = $av_EncryptBox[Mod(($av_EncryptBox[$i_EncryptCountC][0] + $av_EncryptBox[$i_EncryptCountD][0]), 256) ][0]
                    $v_EncryptCipherBy = BitXOR(BinaryMid($b_EncryptText, $i_EncryptCountA, 1), $i_EncryptCountE)
                    $v_EncryptCipher = Binary($v_EncryptCipher) & Binary('0x' & Hex($v_EncryptCipherBy,2))
                Next
                $b_EncryptText = $v_EncryptCipher
                $i_EncryptCountG = ''
                $i_EncryptCountH = ''
                $v_EncryptModified = ''
                For $i_EncryptCountG = 1 To BinaryLen($b_EncryptText)
                    If $i_EncryptCountH = BinaryLen($b_EncryptPassword) Then
                        $i_EncryptCountH = 1
                    Else
                        $i_EncryptCountH += 1
                    EndIf
                    $v_EncryptModified = Binary($v_EncryptModified) & Binary('0x' & Hex(BitXOR(BinaryMid($b_EncryptText, $i_EncryptCountG, 1), BinaryMid($b_EncryptPassword, $i_EncryptCountH, 1), 255),2))
                Next
                $b_EncryptText = BinaryToString($v_EncryptModified, $i_Flag)
            Next
        EndIf
        Return $b_EncryptText
    EndIf
EndFunc   ;==>_StringEncrypt
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...