katoNkatoNK Posted April 12, 2011 Share Posted April 12, 2011 (edited) Edit. Edited April 27, 2023 by katoNkatoNK Link to comment Share on other sites More sharing options...
UEZ Posted April 12, 2011 Share Posted April 12, 2011 I hope this will answer your questions: expandcollapse popup#include <Array.au3> #include <Constants.au3> #include <GUIConstantsEx.au3> #include <WindowsConstants.au3> #include <StaticConstants.au3> #include <ComboConstants.au3> #include <EditConstants.au3> #include <ButtonConstants.au3> #include <GDIPlus.au3> #Include <WinAPI.au3> Opt('MustDeclareVars', 1) Opt('TrayMenuMode', 3) Opt('TrayAutoPause', 0) Global $gui, $gui_child, $msg, $ePath Global $tab0, $tab1, $tab2, $tab3, $tab4, $tab_end Global Const $SC_DRAGMOVE = 0xF012 Global $varFile = @ScriptDir & '\Variables.inc' Global $varRead = IniReadSection($varFile, "Variables") Global $varRefresh = IniRead($varFile, "Variables", "Command", "") Global $Editor = IniRead($varFile, "Variables", "Editor", "C:\Windows\NotePad.exe") Global $prompt_yn = 0 Global $ffList, $fiList, $ffPath, $fiPath, $ffBrowse, $fiBrowse, $ffRead, $fiRead, $fPathBrowse, $fIconBrowse, $FolderPath[13], $FiconPath[13] Global $afList, $aiList, $afPath, $aiPath, $afBrowse, $aiBrowse, $afRead, $aiRead, $aPathBrowse, $aIconBrowse, $AppPath[13], $aIconPath[13] Global $guiImage, $hGraphic coNfig() Func coNfig() Local $value Local $gResources, $gVariables, $gsave, $grefresh Local $eBrowse, $EditorBrowse Local $tMsg, $tMenu, $tResources, $tVariables, $tStyles, $tAbout, $tExit If IsArray($varRead) Then For $i = 1 To UBound($varRead) - 1 $FolderPath[StringRegExpReplace($varRead[$i][0], "(?i)Fpath", "")] = $varRead[$i][1] Next EndIf If IsArray($varRead) Then For $i = 1 To UBound($varRead) - 1 $FiconPath[StringRegExpReplace($varRead[$i][0], "(?i)Ficon", "")] = $varRead[$i][1] Next EndIf _GDIPlus_StartUp() $guiImage = _GDIPlus_ImageLoadFromFile(@ScriptDir & "\coNfig.png") $gui = GUICreate("", 400, 290, -1, -1, $WS_POPUP, $WS_EX_LAYERED) SetTransparentBitmap($gui, $guiImage) _GDIPlus_ShutDown() $gui_child = GUICreate("coNfig", 384, 246, 10, 37, $WS_POPUP, $WS_EX_MDICHILD, $gui) GUISetState(@SW_SHOW, $gui) GUISetState(@SW_SHOW, $gui_child) ;~ GUISwitch($gui_child) GUICtrlCreateGroup("Resources", 10, 145, 270, 55) GUICtrlSetFont(-1, 6, 400, 0, "hooge 05_53") $gResources = GUICtrlCreateButton("Open..", 23, 163, 50) GUICtrlSetFont($gResources, 6, 400, 0, "hooge 05_53") $gVariables = GUICtrlCreateButton("Var.inc", 82, 163, 50) GUICtrlSetFont($gVariables, 6, 400, 0, "hooge 05_53") $gsave = GUICtrlCreateButton("Save", 295, 150, 55, 23) $grefresh = GUICtrlCreateButton("Refresh", 295, 177, 55, 23) GUICtrlCreateTab(10, 10, 350, 130) ;<Folders $tab0 = GUICtrlCreateTabItem("Folders") GUICtrlCreateLabel("Folder:", 20, 50) $ffList = GUICtrlCreateCombo("1", 60, 48, 35) GUICtrlSetData(-1, "2|3|4|5|6|7|8|9|10|11|12") $ffPath = GUICtrlCreateInput("", 105, 48, 200) $value = $FolderPath[GUICtrlRead($ffList)] If $value = "" Then $value = "Path. . . . . . . . . . . [ browse>" GUICtrlSetData($ffPath, $value) $ffBrowse = GUICtrlCreateButton("...", 315, 47, 30, 22) GUICtrlCreateLabel("Icon:", 28, 100) $fiList = GUICtrlCreateCombo("1", 60, 98, 35) GUICtrlSetData(-1, "2|3|4|5|6|7|8|9|10|11|12") $fiPath = GUICtrlCreateInput("", 105, 98, 200) $value = $FiconPath[GUICtrlRead($fiList)] If $value = "" Then $value = "Icon. . . . . . . . . . . [ browse>" GUICtrlSetData($fiPath, $value) $fiBrowse = GUICtrlCreateButton("...", 315, 97, 30, 22) ;Folders/> ;<Apps $tab1 = GUICtrlCreateTabItem("Apps") GUICtrlCreateLabel("App:", 20, 50) $afList = GUICtrlCreateCombo("1", 60, 48, 35) GUICtrlSetData(-1, "2|3|4|5|6|7|8|9|10|11|12") $afPath = GUICtrlCreateInput("", 105, 48, 200) $value = $AppPath[GUICtrlRead($afList)] If $value = "" Then $value = "Path. . . . . . . . . . . [ browse>" GUICtrlSetData($afPath, $value) $afBrowse = GUICtrlCreateButton("...", 315, 47, 30, 22) GUICtrlCreateLabel("Icon:", 28, 100) $aiList = GUICtrlCreateCombo("1", 60, 98, 35) GUICtrlSetData(-1, "2|3|4|5|6|7|8|9|10|11|12") $aiPath = GUICtrlCreateInput("", 105, 98, 200) $value = $AiconPath[GUICtrlRead($aiList)] If $value = "" Then $value = "Icon. . . . . . . . . . . [ browse>" GUICtrlSetData($aiPath, $value) $aiBrowse = GUICtrlCreateButton("...", 315, 97, 30, 22) ;Apps/> ;<Drives $tab2 = GUICtrlCreateTabItem("Drives") ;Drives/> ;<System $tab3 = GUICtrlCreateTabItem("System") ;System/> ;<Editor $tab4 = GUICtrlCreateTabItem("Editor") $ePath = GUICtrlCreateInput("", 25, 50, 270) If $Editor = "" Then $Editor = "Default File Editor Path . . ." GUICtrlSetData($ePath, $Editor) $eBrowse = GUICtrlCreateButton("...", 310, 49, 30, 24) GUICtrlCreateLabel("Browse or Enter the Editor's path manually." & @CRLF & "Choose the Default Editor with which the skin's resource files will open with - 'Var.inc', 'Styles.inc'", 35, 85, 290, 40, $SS_CENTER) ;Editor/> $tab_end = GUICtrlCreateTabItem(""); GUICtrlSetState($tab0, $GUI_SHOW) ;<Tray $tMenu = TrayCreateMenu("Resources") $tResources = TrayCreateItem("Open..", $tMenu) TrayCreateItem("", $tMenu) $tVariables = TrayCreateItem("Variables", $tMenu) $tStyles = TrayCreateItem("Styles", $tMenu) TrayCreateItem("") $tAbout = TrayCreateItem("About") TrayCreateItem("") $tExit = TrayCreateItem("Exit") ;Tray/> TraySetState(2) TraySetClick(24) GUIRegisterMsg($WM_COMMAND, "WM_COMMAND") ;~ GUIRegisterMsg($WM_PAINT, "MY_WM_PAINT") GUIRegisterMsg($WM_LBUTTONDOWN, "_WM_LBUTTONDOWN") While 1 ;<Gui> $msg = GUIGetMsg() Switch $msg Case $GUI_EVENT_CLOSE If $prompt_yn > 0 Then Prompt() If $prompt_yn < 1 Then Exit Case $GUI_EVENT_MINIMIZE GUISetState(@SW_MINIMIZE) GUISetState(@SW_HIDE) TraySetState() Case $eBrowse $EditorBrowse = FileOpenDialog("Select Default Editor", @ScriptDir, "EXE (*.EXE)") If Not @error Then GUICtrlSetData($ePath, $EditorBrowse) $prompt_yn = 1 EndIf Case $ffBrowse $ffRead = GUICtrlRead($ffList) $fPathBrowse = FileSelectFolder("Folder " & $ffRead & " path...", "") If Not @error Then GUICtrlSetData($ffPath, $fPathBrowse) $FolderPath[GUICtrlRead($ffList)] = $fPathBrowse $prompt_yn = 1 EndIf Case $fiBrowse $fiRead = GUICtrlRead($fiList) $fIconBrowse = FileOpenDialog("Icon " & $fiRead & " path...", @ScriptDir, "PNG (*.PNG)") If Not @error Then GUICtrlSetData($fiPath, $fIconBrowse) $FiconPath[GUICtrlRead($fiList)] = $fIconBrowse $prompt_yn = 1 EndIf Case $ffList $value = $FolderPath[GUICtrlRead($ffList)] If $value = "" Then $value = "Path. . . . . . . . . . . [ browse>" GUICtrlSetData($ffPath, $value) Case $fiList $value = $FiconPath[GUICtrlRead($fiList)] If $value = "" Then $value = "Icon. . . . . . . . . . . [ browse>" GUICtrlSetData($fiPath, $value) Case $gResources ShellExecute(@ScriptDir) Case $gVariables $Editor = IniRead($varFile, "Variables", "Editor", "C:\Windows\NotePad.exe") ShellExecute($Editor, @ScriptDir & '\Variables.inc', "") Case $gsave $prompt_yn = 0 WriteINI() Case $grefresh ShellExecute("refresh.exe", $varRefresh) EndSwitch ;<Tray> $tMsg = TrayGetMsg() Switch $tMsg Case $tResources ShellExecute(@ScriptDir) Case $tVariables $Editor = IniRead($varFile, "Variables", "Editor", "C:\Windows\NotePad.exe") ShellExecute($Editor, @ScriptDir & '\Variables.inc', "") Case $tAbout About() Case $TRAY_EVENT_PRIMARYUP GUISetState(@SW_SHOWNORMAL) WinActivate($gui) TraySetState(2) Case $tExit Exit EndSwitch WEnd EndFunc ;==>coNfig Func MY_WM_PAINT($hWnd, $Msg, $wParam, $lParam) _WinAPI_RedrawWindow($gui, 0, 0, $RDW_UPDATENOW) _GDIPlus_GraphicsDrawImage($hGraphic, $guiImage, 0, 0) _WinAPI_RedrawWindow($gui, 0, 0, $RDW_VALIDATE) Return $GUI_RUNDEFMSG EndFunc Func WriteINI() IniWrite($varFile, "Variables", "Editor", GUICtrlRead($ePath)) For $i = 1 To 12 IniWrite($varFile, "Variables", "Fpath" & $i, $FolderPath[$i]) Next For $i = 1 To 12 IniWrite($varFile, "Variables", "Ficon" & $i, $FiconPath[$i]) Next EndFunc ;==>WriteINI Func WM_COMMAND($hWnd, $msg, $wParam, $lParam) Local $chk = BitAND($wParam, 0x0000FFFF) Switch $chk Case $ffPath If FileExists(GUICtrlRead($ffPath)) Then $FolderPath[GUICtrlRead($ffList)] = GUICtrlRead($ffPath) GUICtrlSetBkColor($ffPath, 0xFFFFFFFF) Else GUICtrlSetBkColor($ffPath, 0xFF3333) EndIf Case $fiPath If FileExists(GUICtrlRead($fiPath)) Then $FiconPath[GUICtrlRead($fiList)] = GUICtrlRead($fiPath) GUICtrlSetBkColor($fiPath, 0xFFFFFFFF) Else GUICtrlSetBkColor($fiPath, 0xFF3333) EndIf EndSwitch EndFunc ;==>WM_COMMAND Func Prompt() Local $promptbox $promptbox = MsgBox(4, "Exit", "Without saving?") If $promptbox = 6 Then Exit If $promptbox = 7 Then Return EndFunc ;==>Prompt Func About() Local $gLink, $gBTN, $bStartUp, $bStatus GUICreate("About", 210, 120, -1, -1) $gLink = GUICtrlCreateLabel("CC BY-NC-SA" & @CRLF & "katoNkatoNK.deviantart.com", 20, 27, 170, 35, $SS_CENTER) GuiCtrlCreateGroup("About", 17, 10, 176, 55) $bStartUp = GUICtrlCreateCheckbox("Add/Remove", 30, 84) GUICtrlCreateGroup("Run at Startup", 17, 70, 110, 40) $gBTN = GUICtrlCreateButton("Close", 142, 80, 50, 26) GUISetState() While 1 $msg = GUIGetMsg() $bStatus = GUICtrlRead($bStartUp) Switch $msg Case $gLink ShellExecute("http://katoNkatoNk.deviantart.com") Case $bStartUp If $bStatus = $GUI_CHECKED Then RegRead("HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run", "coNfig") If Not @error Then RegWrite("HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run", "coNfig", "REG_SZ", @ScriptDir & '\coNfig.exe') EndIf EndIf If $bStatus = $GUI_UNCHECKED Then RegRead("HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run", "coNfig") If Not @error Then RegDelete("HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run", "coNfig") EndIf EndIf Case $gBTN GUIDelete() ExitLoop EndSwitch WEnd EndFunc ;==>About Func _WM_LBUTTONDOWN($hWnd, $iMsg, $wParam, $lParam) _SendMessage($gui, $WM_SYSCOMMAND, $SC_DRAGMOVE, 0) EndFunc ;==>_WM_LBUTTONDOWN Func SetTransparentBitmap($hGUI, $hImage, $iOpacity = 0xFF) Local $hScrDC, $hMemDC, $hBitmap, $hOld, $pSize, $tSize, $pSource, $tSource, $pBlend, $tBlend $hScrDC = _WinAPI_GetDC(0) $hMemDC = _WinAPI_CreateCompatibleDC($hScrDC) $hBitmap = _GDIPlus_BitmapCreateHBITMAPFromBitmap($hImage) $hOld = _WinAPI_SelectObject($hMemDC, $hBitmap) $tSize = DllStructCreate($tagSIZE) $pSize = DllStructGetPtr($tSize) DllStructSetData($tSize, "X", _GDIPlus_ImageGetWidth($hImage)) DllStructSetData($tSize, "Y", _GDIPlus_ImageGetHeight($hImage)) $tSource = DllStructCreate($tagPOINT) $pSource = DllStructGetPtr($tSource) $tBlend = DllStructCreate($tagBLENDFUNCTION) $pBlend = DllStructGetPtr($tBlend) DllStructSetData($tBlend, "Alpha", $iOpacity) DllStructSetData($tBlend, "Format", 1) _WinAPI_UpdateLayeredWindow($hGUI, $hMemDC, 0, $pSize, $hMemDC, $pSource, 0, $pBlend, $ULW_ALPHA) _WinAPI_ReleaseDC(0, $hScrDC) _WinAPI_SelectObject($hMemDC, $hOld) _WinAPI_DeleteObject($hBitmap) _WinAPI_DeleteDC($hMemDC) EndFunc ;==>SetTransparentBitmap First resize the png image to dimension 398x288 then start the script. Br, UEZ Please don't send me any personal message and ask for support! I will not reply! Selection of finest graphical examples at Codepen.io The own fart smells best! ✌Her 'sikim hıyar' diyene bir avuç tuz alıp koşma!¯\_(ツ)_/¯ ٩(●̮̮̃•̃)۶ ٩(-̮̮̃-̃)۶ૐ Link to comment Share on other sites More sharing options...
UEZ Posted April 12, 2011 Share Posted April 12, 2011 I hope this will answer your questions: expandcollapse popup#include <Array.au3> #include <Constants.au3> #include <GUIConstantsEx.au3> #include <WindowsConstants.au3> #include <StaticConstants.au3> #include <ComboConstants.au3> #include <EditConstants.au3> #include <ButtonConstants.au3> #include <GDIPlus.au3> #Include <WinAPI.au3> Opt('MustDeclareVars', 1) Opt('TrayMenuMode', 3) Opt('TrayAutoPause', 0) Global $gui, $gui_child, $msg, $ePath Global $tab0, $tab1, $tab2, $tab3, $tab4, $tab_end Global Const $SC_DRAGMOVE = 0xF012 Global $varFile = @ScriptDir & '\Variables.inc' Global $varRead = IniReadSection($varFile, "Variables") Global $varRefresh = IniRead($varFile, "Variables", "Command", "") Global $Editor = IniRead($varFile, "Variables", "Editor", "C:\Windows\NotePad.exe") Global $prompt_yn = 0 Global $ffList, $fiList, $ffPath, $fiPath, $ffBrowse, $fiBrowse, $ffRead, $fiRead, $fPathBrowse, $fIconBrowse, $FolderPath[13], $FiconPath[13] Global $afList, $aiList, $afPath, $aiPath, $afBrowse, $aiBrowse, $afRead, $aiRead, $aPathBrowse, $aIconBrowse, $AppPath[13], $aIconPath[13] Global $guiImage, $hGraphic coNfig() Func coNfig() Local $value Local $gResources, $gVariables, $gsave, $grefresh Local $eBrowse, $EditorBrowse Local $tMsg, $tMenu, $tResources, $tVariables, $tStyles, $tAbout, $tExit If IsArray($varRead) Then For $i = 1 To UBound($varRead) - 1 $FolderPath[StringRegExpReplace($varRead[$i][0], "(?i)Fpath", "")] = $varRead[$i][1] Next EndIf If IsArray($varRead) Then For $i = 1 To UBound($varRead) - 1 $FiconPath[StringRegExpReplace($varRead[$i][0], "(?i)Ficon", "")] = $varRead[$i][1] Next EndIf _GDIPlus_StartUp() $guiImage = _GDIPlus_ImageLoadFromFile(@ScriptDir & "\coNfig.png") $gui = GUICreate("", 400, 290, -1, -1, $WS_POPUP, $WS_EX_LAYERED) SetTransparentBitmap($gui, $guiImage) _GDIPlus_ShutDown() $gui_child = GUICreate("coNfig", 384, 246, 10, 37, $WS_POPUP, $WS_EX_MDICHILD, $gui) GUISetState(@SW_SHOW, $gui) GUISetState(@SW_SHOW, $gui_child) ;~ GUISwitch($gui_child) GUICtrlCreateGroup("Resources", 10, 145, 270, 55) GUICtrlSetFont(-1, 6, 400, 0, "hooge 05_53") $gResources = GUICtrlCreateButton("Open..", 23, 163, 50) GUICtrlSetFont($gResources, 6, 400, 0, "hooge 05_53") $gVariables = GUICtrlCreateButton("Var.inc", 82, 163, 50) GUICtrlSetFont($gVariables, 6, 400, 0, "hooge 05_53") $gsave = GUICtrlCreateButton("Save", 295, 150, 55, 23) $grefresh = GUICtrlCreateButton("Refresh", 295, 177, 55, 23) GUICtrlCreateTab(10, 10, 350, 130) ;<Folders $tab0 = GUICtrlCreateTabItem("Folders") GUICtrlCreateLabel("Folder:", 20, 50) $ffList = GUICtrlCreateCombo("1", 60, 48, 35) GUICtrlSetData(-1, "2|3|4|5|6|7|8|9|10|11|12") $ffPath = GUICtrlCreateInput("", 105, 48, 200) $value = $FolderPath[GUICtrlRead($ffList)] If $value = "" Then $value = "Path. . . . . . . . . . . [ browse>" GUICtrlSetData($ffPath, $value) $ffBrowse = GUICtrlCreateButton("...", 315, 47, 30, 22) GUICtrlCreateLabel("Icon:", 28, 100) $fiList = GUICtrlCreateCombo("1", 60, 98, 35) GUICtrlSetData(-1, "2|3|4|5|6|7|8|9|10|11|12") $fiPath = GUICtrlCreateInput("", 105, 98, 200) $value = $FiconPath[GUICtrlRead($fiList)] If $value = "" Then $value = "Icon. . . . . . . . . . . [ browse>" GUICtrlSetData($fiPath, $value) $fiBrowse = GUICtrlCreateButton("...", 315, 97, 30, 22) ;Folders/> ;<Apps $tab1 = GUICtrlCreateTabItem("Apps") GUICtrlCreateLabel("App:", 20, 50) $afList = GUICtrlCreateCombo("1", 60, 48, 35) GUICtrlSetData(-1, "2|3|4|5|6|7|8|9|10|11|12") $afPath = GUICtrlCreateInput("", 105, 48, 200) $value = $AppPath[GUICtrlRead($afList)] If $value = "" Then $value = "Path. . . . . . . . . . . [ browse>" GUICtrlSetData($afPath, $value) $afBrowse = GUICtrlCreateButton("...", 315, 47, 30, 22) GUICtrlCreateLabel("Icon:", 28, 100) $aiList = GUICtrlCreateCombo("1", 60, 98, 35) GUICtrlSetData(-1, "2|3|4|5|6|7|8|9|10|11|12") $aiPath = GUICtrlCreateInput("", 105, 98, 200) $value = $AiconPath[GUICtrlRead($aiList)] If $value = "" Then $value = "Icon. . . . . . . . . . . [ browse>" GUICtrlSetData($aiPath, $value) $aiBrowse = GUICtrlCreateButton("...", 315, 97, 30, 22) ;Apps/> ;<Drives $tab2 = GUICtrlCreateTabItem("Drives") ;Drives/> ;<System $tab3 = GUICtrlCreateTabItem("System") ;System/> ;<Editor $tab4 = GUICtrlCreateTabItem("Editor") $ePath = GUICtrlCreateInput("", 25, 50, 270) If $Editor = "" Then $Editor = "Default File Editor Path . . ." GUICtrlSetData($ePath, $Editor) $eBrowse = GUICtrlCreateButton("...", 310, 49, 30, 24) GUICtrlCreateLabel("Browse or Enter the Editor's path manually." & @CRLF & "Choose the Default Editor with which the skin's resource files will open with - 'Var.inc', 'Styles.inc'", 35, 85, 290, 40, $SS_CENTER) ;Editor/> $tab_end = GUICtrlCreateTabItem(""); GUICtrlSetState($tab0, $GUI_SHOW) ;<Tray $tMenu = TrayCreateMenu("Resources") $tResources = TrayCreateItem("Open..", $tMenu) TrayCreateItem("", $tMenu) $tVariables = TrayCreateItem("Variables", $tMenu) $tStyles = TrayCreateItem("Styles", $tMenu) TrayCreateItem("") $tAbout = TrayCreateItem("About") TrayCreateItem("") $tExit = TrayCreateItem("Exit") ;Tray/> TraySetState(2) TraySetClick(24) GUIRegisterMsg($WM_COMMAND, "WM_COMMAND") ;~ GUIRegisterMsg($WM_PAINT, "MY_WM_PAINT") GUIRegisterMsg($WM_LBUTTONDOWN, "_WM_LBUTTONDOWN") While 1 ;<Gui> $msg = GUIGetMsg() Switch $msg Case $GUI_EVENT_CLOSE If $prompt_yn > 0 Then Prompt() If $prompt_yn < 1 Then Exit Case $GUI_EVENT_MINIMIZE GUISetState(@SW_MINIMIZE) GUISetState(@SW_HIDE) TraySetState() Case $eBrowse $EditorBrowse = FileOpenDialog("Select Default Editor", @ScriptDir, "EXE (*.EXE)") If Not @error Then GUICtrlSetData($ePath, $EditorBrowse) $prompt_yn = 1 EndIf Case $ffBrowse $ffRead = GUICtrlRead($ffList) $fPathBrowse = FileSelectFolder("Folder " & $ffRead & " path...", "") If Not @error Then GUICtrlSetData($ffPath, $fPathBrowse) $FolderPath[GUICtrlRead($ffList)] = $fPathBrowse $prompt_yn = 1 EndIf Case $fiBrowse $fiRead = GUICtrlRead($fiList) $fIconBrowse = FileOpenDialog("Icon " & $fiRead & " path...", @ScriptDir, "PNG (*.PNG)") If Not @error Then GUICtrlSetData($fiPath, $fIconBrowse) $FiconPath[GUICtrlRead($fiList)] = $fIconBrowse $prompt_yn = 1 EndIf Case $ffList $value = $FolderPath[GUICtrlRead($ffList)] If $value = "" Then $value = "Path. . . . . . . . . . . [ browse>" GUICtrlSetData($ffPath, $value) Case $fiList $value = $FiconPath[GUICtrlRead($fiList)] If $value = "" Then $value = "Icon. . . . . . . . . . . [ browse>" GUICtrlSetData($fiPath, $value) Case $gResources ShellExecute(@ScriptDir) Case $gVariables $Editor = IniRead($varFile, "Variables", "Editor", "C:\Windows\NotePad.exe") ShellExecute($Editor, @ScriptDir & '\Variables.inc', "") Case $gsave $prompt_yn = 0 WriteINI() Case $grefresh ShellExecute("refresh.exe", $varRefresh) EndSwitch ;<Tray> $tMsg = TrayGetMsg() Switch $tMsg Case $tResources ShellExecute(@ScriptDir) Case $tVariables $Editor = IniRead($varFile, "Variables", "Editor", "C:\Windows\NotePad.exe") ShellExecute($Editor, @ScriptDir & '\Variables.inc', "") Case $tAbout About() Case $TRAY_EVENT_PRIMARYUP GUISetState(@SW_SHOWNORMAL) WinActivate($gui) TraySetState(2) Case $tExit Exit EndSwitch WEnd EndFunc ;==>coNfig Func MY_WM_PAINT($hWnd, $Msg, $wParam, $lParam) _WinAPI_RedrawWindow($gui, 0, 0, $RDW_UPDATENOW) _GDIPlus_GraphicsDrawImage($hGraphic, $guiImage, 0, 0) _WinAPI_RedrawWindow($gui, 0, 0, $RDW_VALIDATE) Return $GUI_RUNDEFMSG EndFunc Func WriteINI() IniWrite($varFile, "Variables", "Editor", GUICtrlRead($ePath)) For $i = 1 To 12 IniWrite($varFile, "Variables", "Fpath" & $i, $FolderPath[$i]) Next For $i = 1 To 12 IniWrite($varFile, "Variables", "Ficon" & $i, $FiconPath[$i]) Next EndFunc ;==>WriteINI Func WM_COMMAND($hWnd, $msg, $wParam, $lParam) Local $chk = BitAND($wParam, 0x0000FFFF) Switch $chk Case $ffPath If FileExists(GUICtrlRead($ffPath)) Then $FolderPath[GUICtrlRead($ffList)] = GUICtrlRead($ffPath) GUICtrlSetBkColor($ffPath, 0xFFFFFFFF) Else GUICtrlSetBkColor($ffPath, 0xFF3333) EndIf Case $fiPath If FileExists(GUICtrlRead($fiPath)) Then $FiconPath[GUICtrlRead($fiList)] = GUICtrlRead($fiPath) GUICtrlSetBkColor($fiPath, 0xFFFFFFFF) Else GUICtrlSetBkColor($fiPath, 0xFF3333) EndIf EndSwitch EndFunc ;==>WM_COMMAND Func Prompt() Local $promptbox $promptbox = MsgBox(4, "Exit", "Without saving?") If $promptbox = 6 Then Exit If $promptbox = 7 Then Return EndFunc ;==>Prompt Func About() Local $gLink, $gBTN, $bStartUp, $bStatus GUICreate("About", 210, 120, -1, -1) $gLink = GUICtrlCreateLabel("CC BY-NC-SA" & @CRLF & "katoNkatoNK.deviantart.com", 20, 27, 170, 35, $SS_CENTER) GuiCtrlCreateGroup("About", 17, 10, 176, 55) $bStartUp = GUICtrlCreateCheckbox("Add/Remove", 30, 84) GUICtrlCreateGroup("Run at Startup", 17, 70, 110, 40) $gBTN = GUICtrlCreateButton("Close", 142, 80, 50, 26) GUISetState() While 1 $msg = GUIGetMsg() $bStatus = GUICtrlRead($bStartUp) Switch $msg Case $gLink ShellExecute("http://katoNkatoNk.deviantart.com") Case $bStartUp If $bStatus = $GUI_CHECKED Then RegRead("HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run", "coNfig") If Not @error Then RegWrite("HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run", "coNfig", "REG_SZ", @ScriptDir & '\coNfig.exe') EndIf EndIf If $bStatus = $GUI_UNCHECKED Then RegRead("HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run", "coNfig") If Not @error Then RegDelete("HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run", "coNfig") EndIf EndIf Case $gBTN GUIDelete() ExitLoop EndSwitch WEnd EndFunc ;==>About Func _WM_LBUTTONDOWN($hWnd, $iMsg, $wParam, $lParam) _SendMessage($gui, $WM_SYSCOMMAND, $SC_DRAGMOVE, 0) EndFunc ;==>_WM_LBUTTONDOWN Func SetTransparentBitmap($hGUI, $hImage, $iOpacity = 0xFF) Local $hScrDC, $hMemDC, $hBitmap, $hOld, $pSize, $tSize, $pSource, $tSource, $pBlend, $tBlend $hScrDC = _WinAPI_GetDC(0) $hMemDC = _WinAPI_CreateCompatibleDC($hScrDC) $hBitmap = _GDIPlus_BitmapCreateHBITMAPFromBitmap($hImage) $hOld = _WinAPI_SelectObject($hMemDC, $hBitmap) $tSize = DllStructCreate($tagSIZE) $pSize = DllStructGetPtr($tSize) DllStructSetData($tSize, "X", _GDIPlus_ImageGetWidth($hImage)) DllStructSetData($tSize, "Y", _GDIPlus_ImageGetHeight($hImage)) $tSource = DllStructCreate($tagPOINT) $pSource = DllStructGetPtr($tSource) $tBlend = DllStructCreate($tagBLENDFUNCTION) $pBlend = DllStructGetPtr($tBlend) DllStructSetData($tBlend, "Alpha", $iOpacity) DllStructSetData($tBlend, "Format", 1) _WinAPI_UpdateLayeredWindow($hGUI, $hMemDC, 0, $pSize, $hMemDC, $pSource, 0, $pBlend, $ULW_ALPHA) _WinAPI_ReleaseDC(0, $hScrDC) _WinAPI_SelectObject($hMemDC, $hOld) _WinAPI_DeleteObject($hBitmap) _WinAPI_DeleteDC($hMemDC) EndFunc ;==>SetTransparentBitmap First resize the png image to dimension 398x288 then start the script. Br, UEZ Please don't send me any personal message and ask for support! I will not reply! Selection of finest graphical examples at Codepen.io The own fart smells best! ✌Her 'sikim hıyar' diyene bir avuç tuz alıp koşma!¯\_(ツ)_/¯ ٩(●̮̮̃•̃)۶ ٩(-̮̮̃-̃)۶ૐ Link to comment Share on other sites More sharing options...
katoNkatoNK Posted April 12, 2011 Author Share Posted April 12, 2011 (edited) Edit. Edited April 27, 2023 by katoNkatoNK Link to comment Share on other sites More sharing options...
katoNkatoNK Posted April 13, 2011 Author Share Posted April 13, 2011 (edited) Edit. Edited April 27, 2023 by katoNkatoNK Link to comment Share on other sites More sharing options...
UEZ Posted April 15, 2011 Share Posted April 15, 2011 (edited) Try this: expandcollapse popup#include <Array.au3> #include <Constants.au3> #include <GUIConstantsEx.au3> #include <WindowsConstants.au3> #include <StaticConstants.au3> #include <ComboConstants.au3> #include <EditConstants.au3> #include <ButtonConstants.au3> #include <GDIPlus.au3> #Include <WinAPI.au3> ;~ Opt('MustDeclareVars', 1) Opt('TrayMenuMode', 3) Opt('TrayAutoPause', 0) Global $gui, $gui_child, $msg, $ePath Global $tab0, $tab1, $tab2, $tab3, $tab4, $tab_end Global Const $SC_DRAGMOVE = 0xF012 Global $varFile = @ScriptDir & '\Variables.inc' Global $varRead = IniReadSection($varFile, "Variables") Global $varRefresh = IniRead($varFile, "Variables", "Command", "") Global $Editor = IniRead($varFile, "Variables", "Editor", "C:\Windows\NotePad.exe") Global $prompt_yn = 0 Global $ffList, $fiList, $ffPath, $fiPath, $ffBrowse, $fiBrowse, $ffRead, $fiRead, $fPathBrowse, $fIconBrowse, $FolderPath[13], $FiconPath[13] Global $afList, $aiList, $afPath, $aiPath, $afBrowse, $aiBrowse, $afRead, $aiRead, $aPathBrowse, $aIconBrowse, $AppPath[13], $aIconPath[13] Global $guiImage, $hGraphic Global $Struct = DllStructCreate("int cxLeftWidth;int cxRightWidth;int cyTopHeight;int cyBottomHeight;") Global $sStruct = DllStructCreate("dword;int;ptr;int") coNfig() Func coNfig() Local $value Local $gResources, $gVariables, $gsave, $grefresh Local $eBrowse, $EditorBrowse Local $tMsg, $tMenu, $tResources, $tVariables, $tStyles, $tAbout, $tExit If IsArray($varRead) Then For $i = 1 To UBound($varRead) - 1 $FolderPath[StringRegExpReplace($varRead[$i][0], "(?i)Fpath", "")] = $varRead[$i][1] Next EndIf If IsArray($varRead) Then For $i = 1 To UBound($varRead) - 1 $FiconPath[StringRegExpReplace($varRead[$i][0], "(?i)Ficon", "")] = $varRead[$i][1] Next EndIf _GDIPlus_StartUp() $guiImage = _GDIPlus_ImageLoadFromFile(@ScriptDir & "\coNfig.png") $gui = GUICreate("", 400, 290, -1, -1, $WS_POPUP, $WS_EX_LAYERED) SetTransparentBitmap($gui, $guiImage) $gui_child = GUICreate("coNfig", 384, 246, 10, 37, $WS_POPUP, $WS_EX_MDICHILD, $gui) GUISetState(@SW_SHOW, $gui) GUISetState(@SW_SHOW, $gui_child) ;~ GUISwitch($gui_child) If _Vista_ICE() Then _Vista_EnableBlurBehind($gui_child) GUICtrlCreateGroup("Resources", 10, 145, 270, 55) GUICtrlSetFont(-1, 6, 400, 0, "hooge 05_53") $gResources = GUICtrlCreateButton("Open..", 23, 163, 50) GUICtrlSetFont($gResources, 6, 400, 0, "hooge 05_53") $gVariables = GUICtrlCreateButton("Var.inc", 82, 163, 50) GUICtrlSetFont($gVariables, 6, 400, 0, "hooge 05_53") $gsave = GUICtrlCreateButton("Save", 295, 150, 55, 23) $grefresh = GUICtrlCreateButton("Refresh", 295, 177, 55, 23) GUICtrlCreateTab(10, 10, 350, 130) ;<Folders $tab0 = GUICtrlCreateTabItem("Folders") GUICtrlCreateLabel("Folder:", 20, 50) $ffList = GUICtrlCreateCombo("1", 60, 48, 35) GUICtrlSetData(-1, "2|3|4|5|6|7|8|9|10|11|12") $ffPath = GUICtrlCreateInput("", 105, 48, 200) $value = $FolderPath[GUICtrlRead($ffList)] If $value = "" Then $value = "Path. . . . . . . . . . . [ browse>" GUICtrlSetData($ffPath, $value) $ffBrowse = GUICtrlCreateButton("...", 315, 47, 30, 22) GUICtrlCreateLabel("Icon:", 28, 100) $fiList = GUICtrlCreateCombo("1", 60, 98, 35) GUICtrlSetData(-1, "2|3|4|5|6|7|8|9|10|11|12") $fiPath = GUICtrlCreateInput("", 105, 98, 200) $value = $FiconPath[GUICtrlRead($fiList)] If $value = "" Then $value = "Icon. . . . . . . . . . . [ browse>" GUICtrlSetData($fiPath, $value) $fiBrowse = GUICtrlCreateButton("...", 315, 97, 30, 22) ;Folders/> ;<Apps $tab1 = GUICtrlCreateTabItem("Apps") GUICtrlCreateLabel("App:", 20, 50) $afList = GUICtrlCreateCombo("1", 60, 48, 35) GUICtrlSetData(-1, "2|3|4|5|6|7|8|9|10|11|12") $afPath = GUICtrlCreateInput("", 105, 48, 200) $value = $AppPath[GUICtrlRead($afList)] If $value = "" Then $value = "Path. . . . . . . . . . . [ browse>" GUICtrlSetData($afPath, $value) $afBrowse = GUICtrlCreateButton("...", 315, 47, 30, 22) GUICtrlCreateLabel("Icon:", 28, 100) $aiList = GUICtrlCreateCombo("1", 60, 98, 35) GUICtrlSetData(-1, "2|3|4|5|6|7|8|9|10|11|12") $aiPath = GUICtrlCreateInput("", 105, 98, 200) $value = $AiconPath[GUICtrlRead($aiList)] If $value = "" Then $value = "Icon. . . . . . . . . . . [ browse>" GUICtrlSetData($aiPath, $value) $aiBrowse = GUICtrlCreateButton("...", 315, 97, 30, 22) ;Apps/> ;<Drives $tab2 = GUICtrlCreateTabItem("Drives") ;Drives/> ;<System $tab3 = GUICtrlCreateTabItem("System") ;System/> ;<Editor $tab4 = GUICtrlCreateTabItem("Editor") $ePath = GUICtrlCreateInput("", 25, 50, 270) If $Editor = "" Then $Editor = "Default File Editor Path . . ." GUICtrlSetData($ePath, $Editor) $eBrowse = GUICtrlCreateButton("...", 310, 49, 30, 24) GUICtrlCreateLabel("Browse or Enter the Editor's path manually." & @CRLF & "Choose the Default Editor with which the skin's resource files will open with - 'Var.inc', 'Styles.inc'", 35, 85, 290, 40, $SS_CENTER) ;Editor/> $tab_end = GUICtrlCreateTabItem(""); GUICtrlSetState($tab0, $GUI_SHOW) ;<Tray $tMenu = TrayCreateMenu("Resources") $tResources = TrayCreateItem("Open..", $tMenu) TrayCreateItem("", $tMenu) $tVariables = TrayCreateItem("Variables", $tMenu) $tStyles = TrayCreateItem("Styles", $tMenu) TrayCreateItem("") $tAbout = TrayCreateItem("About") TrayCreateItem("") $tExit = TrayCreateItem("Exit") ;Tray/> TraySetState(2) TraySetClick(24) GUIRegisterMsg($WM_COMMAND, "WM_COMMAND") ;~ GUIRegisterMsg($WM_PAINT, "MY_WM_PAINT") GUIRegisterMsg($WM_LBUTTONDOWN, "_WM_LBUTTONDOWN") While 1 ;<Gui> $msg = GUIGetMsg() Switch $msg Case $GUI_EVENT_CLOSE If $prompt_yn > 0 Then Prompt() If $prompt_yn < 1 Then Exit Case $GUI_EVENT_MINIMIZE GUISetState(@SW_MINIMIZE) GUISetState(@SW_HIDE) TraySetState() Case $eBrowse $EditorBrowse = FileOpenDialog("Select Default Editor", @ScriptDir, "EXE (*.EXE)") If Not @error Then GUICtrlSetData($ePath, $EditorBrowse) $prompt_yn = 1 EndIf Case $ffBrowse $ffRead = GUICtrlRead($ffList) $fPathBrowse = FileSelectFolder("Folder " & $ffRead & " path...", "") If Not @error Then GUICtrlSetData($ffPath, $fPathBrowse) $FolderPath[GUICtrlRead($ffList)] = $fPathBrowse $prompt_yn = 1 EndIf Case $fiBrowse $fiRead = GUICtrlRead($fiList) $fIconBrowse = FileOpenDialog("Icon " & $fiRead & " path...", @ScriptDir, "PNG (*.PNG)") If Not @error Then GUICtrlSetData($fiPath, $fIconBrowse) $FiconPath[GUICtrlRead($fiList)] = $fIconBrowse $prompt_yn = 1 EndIf Case $ffList $value = $FolderPath[GUICtrlRead($ffList)] If $value = "" Then $value = "Path. . . . . . . . . . . [ browse>" GUICtrlSetData($ffPath, $value) Case $fiList $value = $FiconPath[GUICtrlRead($fiList)] If $value = "" Then $value = "Icon. . . . . . . . . . . [ browse>" GUICtrlSetData($fiPath, $value) Case $gResources ShellExecute(@ScriptDir) Case $gVariables $Editor = IniRead($varFile, "Variables", "Editor", "C:\Windows\NotePad.exe") ShellExecute($Editor, @ScriptDir & '\Variables.inc', "") Case $gsave $prompt_yn = 0 WriteINI() Case $grefresh ShellExecute("refresh.exe", $varRefresh) EndSwitch ;<Tray> $tMsg = TrayGetMsg() Switch $tMsg Case $tResources ShellExecute(@ScriptDir) Case $tVariables $Editor = IniRead($varFile, "Variables", "Editor", "C:\Windows\NotePad.exe") ShellExecute($Editor, @ScriptDir & '\Variables.inc', "") Case $tAbout About() Case $TRAY_EVENT_PRIMARYUP GUISetState(@SW_SHOWNORMAL) WinActivate($gui) TraySetState(2) Case $tExit Exit EndSwitch WEnd EndFunc ;==>coNfig Func MY_WM_PAINT($hWnd, $Msg, $wParam, $lParam) _WinAPI_RedrawWindow($gui, 0, 0, $RDW_UPDATENOW) _GDIPlus_GraphicsDrawImage($hGraphic, $guiImage, 0, 0) _WinAPI_RedrawWindow($gui, 0, 0, $RDW_VALIDATE) Return $GUI_RUNDEFMSG EndFunc Func WriteINI() IniWrite($varFile, "Variables", "Editor", GUICtrlRead($ePath)) For $i = 1 To 12 IniWrite($varFile, "Variables", "Fpath" & $i, $FolderPath[$i]) Next For $i = 1 To 12 IniWrite($varFile, "Variables", "Ficon" & $i, $FiconPath[$i]) Next EndFunc ;==>WriteINI Func WM_COMMAND($hWnd, $msg, $wParam, $lParam) Local $chk = BitAND($wParam, 0x0000FFFF) Switch $chk Case $ffPath If FileExists(GUICtrlRead($ffPath)) Then $FolderPath[GUICtrlRead($ffList)] = GUICtrlRead($ffPath) GUICtrlSetBkColor($ffPath, 0xFFFFFFFF) Else GUICtrlSetBkColor($ffPath, 0xFF3333) EndIf Case $fiPath If FileExists(GUICtrlRead($fiPath)) Then $FiconPath[GUICtrlRead($fiList)] = GUICtrlRead($fiPath) GUICtrlSetBkColor($fiPath, 0xFFFFFFFF) Else GUICtrlSetBkColor($fiPath, 0xFF3333) EndIf EndSwitch EndFunc ;==>WM_COMMAND Func Prompt() Local $promptbox $promptbox = MsgBox(4, "Exit", "Without saving?") If $promptbox = 6 Then _GDIPlus_ShutDown() Exit EndIf If $promptbox = 7 Then Return EndFunc ;==>Prompt Func About() Local $gLink, $gBTN, $bStartUp, $bStatus GUICreate("About", 210, 120, -1, -1) $gLink = GUICtrlCreateLabel("CC BY-NC-SA" & @CRLF & "katoNkatoNK.deviantart.com", 20, 27, 170, 35, $SS_CENTER) GuiCtrlCreateGroup("About", 17, 10, 176, 55) $bStartUp = GUICtrlCreateCheckbox("Add/Remove", 30, 84) GUICtrlCreateGroup("Run at Startup", 17, 70, 110, 40) $gBTN = GUICtrlCreateButton("Close", 142, 80, 50, 26) GUISetState() While 1 $msg = GUIGetMsg() $bStatus = GUICtrlRead($bStartUp) Switch $msg Case $gLink ShellExecute("http://katoNkatoNk.deviantart.com") Case $bStartUp If $bStatus = $GUI_CHECKED Then RegRead("HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run", "coNfig") If Not @error Then RegWrite("HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run", "coNfig", "REG_SZ", @ScriptDir & '\coNfig.exe') EndIf EndIf If $bStatus = $GUI_UNCHECKED Then RegRead("HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run", "coNfig") If Not @error Then RegDelete("HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run", "coNfig") EndIf EndIf Case $gBTN GUIDelete() ExitLoop EndSwitch WEnd EndFunc ;==>About Func _WM_LBUTTONDOWN($hWnd, $iMsg, $wParam, $lParam) _SendMessage($gui, $WM_SYSCOMMAND, $SC_DRAGMOVE, 0) EndFunc ;==>_WM_LBUTTONDOWN Func SetTransparentBitmap($hGUI, $hImage, $iOpacity = 0xFF) Local $hScrDC, $hMemDC, $hBitmap, $hOld, $pSize, $tSize, $pSource, $tSource, $pBlend, $tBlend $hScrDC = _WinAPI_GetDC(0) $hMemDC = _WinAPI_CreateCompatibleDC($hScrDC) $hBitmap = _GDIPlus_BitmapCreateHBITMAPFromBitmap($hImage) $hOld = _WinAPI_SelectObject($hMemDC, $hBitmap) $tSize = DllStructCreate($tagSIZE) $pSize = DllStructGetPtr($tSize) DllStructSetData($tSize, "X", _GDIPlus_ImageGetWidth($hImage)) DllStructSetData($tSize, "Y", _GDIPlus_ImageGetHeight($hImage)) $tSource = DllStructCreate($tagPOINT) $pSource = DllStructGetPtr($tSource) $tBlend = DllStructCreate($tagBLENDFUNCTION) $pBlend = DllStructGetPtr($tBlend) DllStructSetData($tBlend, "Alpha", $iOpacity) DllStructSetData($tBlend, "Format", 1) _WinAPI_UpdateLayeredWindow($hGUI, $hMemDC, 0, $pSize, $hMemDC, $pSource, 0, $pBlend, $ULW_ALPHA) _WinAPI_ReleaseDC(0, $hScrDC) _WinAPI_SelectObject($hMemDC, $hOld) _WinAPI_DeleteObject($hBitmap) _WinAPI_DeleteDC($hMemDC) EndFunc ;==>SetTransparentBitmap ; #FUNCTION#;=============================================================================== ; ; Name...........: _Vista_ApplyGlass ; Description ...: Applys glass effect to a window ; Syntax.........: _Vista_ApplyGlass($hWnd, [$bColor) ; Parameters ....: $hWnd - Window handle: ; $bColor - Background color ; Return values .: Success - No return ; Failure - Returns 0 ; Author ........: James Brooks ; Modified.......: ; Remarks .......: Thanks to weaponx! ; Related .......: ; Link ..........; ; Example .......; Yes ; ;;========================================================================================== Func _Vista_ApplyGlass($hWnd, $bColor = 0x000000) If @OSVersion <> "WIN_VISTA" Then MsgBox(16, "_Vista_ApplyGlass", "You are not running Vista!") Exit Else GUISetBkColor($bColor); Must be here! $Ret = DllCall("dwmapi.dll", "long", "DwmExtendFrameIntoClientArea", "hwnd", $hWnd, "long*", DllStructGetPtr($Struct)) If @error Then Return 0 SetError(1) Else Return $Ret EndIf EndIf EndFunc ;==>_Vista_ApplyGlass ; #FUNCTION#;=============================================================================== ; ; Name...........: _Vista_ApplyGlassArea ; Description ...: Applys glass effect to a window area ; Syntax.........: _Vista_ApplyGlassArea($hWnd, $Area, [$bColor) ; Parameters ....: $hWnd - Window handle: ; $Area - Array containing area points ; $bColor - Background color ; Return values .: Success - No return ; Failure - Returns 0 ; Author ........: James Brooks ; Modified.......: ; Remarks .......: Thanks to monoceres! ; Related .......: ; Link ..........; ; Example .......; Yes ; ;;========================================================================================== Func _Vista_ApplyGlassArea($hWnd, $Area, $bColor = 0x000000) If @OSVersion <> "WIN_VISTA" Then MsgBox(16, "_Vista_ApplyGlass", "You are not running Vista!") Exit Else If IsArray($Area) Then DllStructSetData($Struct, "cxLeftWidth", $Area[0]) DllStructSetData($Struct, "cxRightWidth", $Area[1]) DllStructSetData($Struct, "cyTopHeight", $Area[2]) DllStructSetData($Struct, "cyBottomHeight", $Area[3]) GUISetBkColor($bColor); Must be here! $Ret = DllCall("dwmapi.dll", "long*", "DwmExtendFrameIntoClientArea", "hwnd", $hWnd, "ptr", DllStructGetPtr($Struct)) If @error Then Return 0 Else Return $Ret EndIf Else MsgBox(16, "_Vista_ApplyGlassArea", "Area specified is not an array!") EndIf EndIf EndFunc ;==>_Vista_ApplyGlassArea ; #FUNCTION#;=============================================================================== ; ; Name...........: _Vista_EnableBlurBehind ; Description ...: Enables the blur effect on the provided window handle. ; Syntax.........: _Vista_EnableBlurBehind($hWnd) ; Parameters ....: $hWnd - Window handle: ; Return values .: Success - No return ; Failure - Returns 0 ; Author ........: James Brooks ; Modified.......: ; Remarks .......: Thanks to komalo ; Related .......: ; Link ..........; ; Example .......; Yes ; ;;========================================================================================== Func _Vista_EnableBlurBehind($hWnd, $bColor = 0x000000) If @OSBuild < 6000 Then MsgBox(16, "_Vista_ApplyGlass", "You are not running Vista!") Exit Else Const $DWM_BB_ENABLE = 0x00000001 DllStructSetData($sStruct, 1, $DWM_BB_ENABLE) DllStructSetData($sStruct, 2, "1") DllStructSetData($sStruct, 4, "1") GUISetBkColor($bColor); Must be here! $Ret = DllCall("dwmapi.dll", "int", "DwmEnableBlurBehindWindow", "hwnd", $hWnd, "ptr", DllStructGetPtr($sStruct)) If @error Then Return 0 Else Return $Ret EndIf EndIf EndFunc ;==>_Vista_EnableBlurBehind ; #FUNCTION#;=============================================================================== ; ; Name...........: _Vista_ICE ; Description ...: Returns 1 if DWM is enabled or 0 if not ; Syntax.........: _Vista_ICE() ; Parameters ....: ; Return values .: Success - Returns 1 ; Failure - Returns 0 ; Author ........: James Brooks ; Modified.......: ; Remarks .......: Thanks to BrettF ; Related .......: ; Link ..........; ; Example .......; Yes ; ;;========================================================================================== Func _Vista_ICE() $ICEStruct = DllStructCreate("int;") $Ret = DllCall("dwmapi.dll", "int", "DwmIsCompositionEnabled", "ptr", DllStructGetPtr($ICEStruct)) If @error Then Return 0 Else Return DllStructGetData($ICEStruct, 1) EndIf EndFunc ;==>_Vista_ICE Br, UEZ Edited April 15, 2011 by UEZ Please don't send me any personal message and ask for support! I will not reply! Selection of finest graphical examples at Codepen.io The own fart smells best! ✌Her 'sikim hıyar' diyene bir avuç tuz alıp koşma!¯\_(ツ)_/¯ ٩(●̮̮̃•̃)۶ ٩(-̮̮̃-̃)۶ૐ Link to comment Share on other sites More sharing options...
katoNkatoNK Posted April 16, 2011 Author Share Posted April 16, 2011 Thanks so much UEZ! it's working great There is one more thing that could make it easier to apply to the gui, if it is possible to keep the main gui its default colour and stop it from turning black when on top of the aero frame? otherwise the rest of the controls look a bit out of place with black/transparent borders around them and can't be seen if its on a while background Thanks again Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now