Jacxonia Posted May 16, 2011 Share Posted May 16, 2011 Hello, I would like to include a batch file into my auto it script it should be in the same window as the auto itso cmd woul drun in the auto it gui. i Have tried it with the koda gui editor but cannt manage to get an aplication to run in the gui. Thank you for any help! Jacxonia Link to comment Share on other sites More sharing options...
UEZ Posted May 16, 2011 Share Posted May 16, 2011 (edited) You mean something like this? expandcollapse popup;coded by UEZ 2011 #include <Constants.au3> #include <EditConstants.au3> #include <GUIConstantsEx.au3> #include <GuiEdit.au3> #include <WindowsConstants.au3> Global Const $hGUI = GUICreate("Test", 800, 600) Global Const $cidEdit = GUICtrlCreateEdit("", 0, 0, 800, 561, BitOR($ES_AUTOVSCROLL, $ES_READONLY, $WS_HSCROLL, $WS_VSCROLL)) GUICtrlSetData(-1, GetCMDVer() & @CRLF & _ "Copyright © 2009 Microsoft Corporation. All rights reserved." & @CRLF & @CRLF & @HomeDrive & @HomePath & ">") GUICtrlSetFont(-1, 10, 600, 0, "Lucida Console") GUICtrlSetColor(-1, 0xC0C0C0) GUICtrlSetBkColor(-1, 0x000000) Global Const $cidButton1 = GUICtrlCreateButton("Run Batch", 704, 568, 75, 25) GUICtrlSetState(-1, $GUI_DISABLE) Global Const $cidButton2 = GUICtrlCreateButton("Select Batch File", 560, 568, 99, 25) Global Const $cidButton3 = GUICtrlCreateButton("Exit", 8, 568, 75, 25) GUISetState(@SW_SHOW) GUISetIcon(@SystemDir & "cmd.exe", 0, $hGUI) Global $fBatch, $nMsg While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE, $cidButton3 GUIDelete() Exit Case $cidButton1 Run_Batch($fBatch) Case $cidButton2 $fBatch = FileOpenDialog("Select a batch file to start", "", "Batch (*.bat;*.cmd)") If Not @error Then GUICtrlSetState($cidButton1, $GUI_ENABLE) EndSwitch WEnd Func Run_Batch($bfile) Local $pid = Run(@ComSpec & ' /c "' & $bfile & '"', @ScriptDir, @SW_HIDE, $STDERR_MERGED) Local $line, $oldline _GUICtrlEdit_AppendText($cidEdit, $bfile & @CRLF) While Sleep(50) $line = StdoutRead($pid) & @LF If $oldline <> $line Then _GUICtrlEdit_AppendText($cidEdit, $line) $oldline = $line EndIf If Not ProcessExists($pid) Then ExitLoop Wend MsgBox(64, "Information", "Batch file has ended.", 10) EndFunc Func GetCMDVer() Local $foo = Run(@ComSpec & " /c ver", @SystemDir, @SW_HIDE, $STDERR_CHILD + $STDOUT_CHILD) Local $line While 1 $line &= StdoutRead($foo) If @error Then ExitLoop WEnd Return StringStripWS(StringStripCR($line), 3) EndFunc ;==>GetCMDVer Br, UEZ Edited May 18, 2012 by UEZ Please don't send me any personal message and ask for support! I will not reply! Selection of finest graphical examples at Codepen.io The own fart smells best! ✌Her 'sikim hıyar' diyene bir avuç tuz alıp koşma!¯\_(ツ)_/¯ ٩(●̮̮̃•̃)۶ ٩(-̮̮̃-̃)۶ૐ Link to comment Share on other sites More sharing options...
hannes08 Posted May 16, 2011 Share Posted May 16, 2011 I think he's looking for an embedded CMD window. By the way, nice script UEZ! Regards,Hannes[spoiler]If you can't convince them, confuse them![/spoiler] Link to comment Share on other sites More sharing options...
wakillon Posted May 16, 2011 Share Posted May 16, 2011 I think he's looking for an embedded CMD window. By the way, nice script UEZ!A "schön" German cmd Fenster example here ! AutoIt 3.3.14.2 X86 - SciTE 3.6.0 - WIN 8.1 X64 - Other Example Scripts Link to comment Share on other sites More sharing options...
Jacxonia Posted May 16, 2011 Author Share Posted May 16, 2011 @UEZ not quit i would like a real CMD application in the script that can be interacted with! But that was a nice script!!! Thank you! Appreciate any help! Jacxonia Link to comment Share on other sites More sharing options...
UEZ Posted May 16, 2011 Share Posted May 16, 2011 (edited) Jacxonia: Sorry, I don't understand what you want exactly! You can load a real cmd application and display it in the editbox! Maybe you can describe it better! @wakillon: I don't think that he is searching for something like that. Br, UEZ Edited May 16, 2011 by UEZ Please don't send me any personal message and ask for support! I will not reply! Selection of finest graphical examples at Codepen.io The own fart smells best! ✌Her 'sikim hıyar' diyene bir avuç tuz alıp koşma!¯\_(ツ)_/¯ ٩(●̮̮̃•̃)۶ ٩(-̮̮̃-̃)۶ૐ Link to comment Share on other sites More sharing options...
Jacxonia Posted May 16, 2011 Author Share Posted May 16, 2011 actually the way Hannes123 described it was quite acuate i search for a cmd console like when you open it in the accesories folder to be in the auto it GUI the cmd aplication should be embeded in the auto it script! The easiest way for me to explain is like this: Imagine a normal cmd window and your Auto IT Programm, not the whole cmd window should be IN the programm! Jacxonia Link to comment Share on other sites More sharing options...
kilian14 Posted November 9, 2011 Share Posted November 9, 2011 Awesome script, thanks for sharing. I was looking for something like this for a long time. Link to comment Share on other sites More sharing options...
Bhima Posted November 17, 2011 Share Posted November 17, 2011 This is great. If there is any chance that I can capture CMD output via any notification and update my edit control that would be great. Ex: I have a script / batch file (which takes long time to complete) and I execute from AutoIt UI with button press and its output logged in an edit control of the same UI. I should also be able to interact with UI while the script/batch file running behind. Currently, I been using the below technique to solve my requirement. 1. Have a AutoIt GUI (with a edit control) to display results and start / stop buttons. 2. Another AutoIt Console application which actually reads the console output and updates main GUI edit box with _GUICtrlEdit_AppendText($hEditBox, "output from cmd") With the above technique, I could able to start / stop the process whenever I need. I know this is not the best way to solve my problem, but this is what I came up after spending much time. Please suggest if this can be enhanced. #include <Date.au3> #include <GuiEdit.au3> #include <GuiConstantsEx.au3> ; Script Start - Add your code below here Opt("TrayMenuMode",1) $tFile = _Date_Time_EncodeFileTime(@MON, @MDAY, @YEAR, @HOUR, @MIN, @SEC) Local $data = "" Local $i = 1 $hEditBox = ControlGetHandle("My Window","",150) ControlSetText("My Window","",$hEditBox,"Start Time :: "&_Date_Time_FileTimeToStr($tFile)) While True $data = ConsoleRead() If @error Then ExitLoop EndIf $sValidData = "" If($data <> "") Then $aDataFetched = StringSplit($data,@CRLF) $i = 1 If($aDataFetched[0] <> 1) Then While $i < $aDataFetched[0] _GUICtrlEdit_AppendText($hEditBox, @CRLF & $sValidData) $i +=1 WEnd EndIf EndIf Sleep(50) WEnd Link to comment Share on other sites More sharing options...
univer Posted December 16, 2011 Share Posted December 16, 2011 Nice codes! Loving it! You mean something like this? expandcollapse popup;coded by UEZ 2011 #include <Constants.au3> #include <EditConstants.au3> #include <GUIConstantsEx.au3> #include <GuiEdit.au3> #include <WindowsConstants.au3> Global Const $hGUI = GUICreate("Test", 800, 600) Global Const $cidEdit = GUICtrlCreateEdit("", 0, 0, 800, 561, BitOR($ES_AUTOVSCROLL, $ES_READONLY, $WS_HSCROLL, $WS_VSCROLL)) GUICtrlSetData(-1, GetCMDVer() & @CRLF & _ "Copyright (c) 2009 Microsoft Corporation. All rights reserved." & @CRLF & @CRLF & @HomeDrive & @HomePath & ">") GUICtrlSetFont(-1, 10, 600, 0, "Lucida Console") GUICtrlSetColor(-1, 0xC0C0C0) GUICtrlSetBkColor(-1, 0x000000) Global Const $cidButton1 = GUICtrlCreateButton("Run Batch", 704, 568, 75, 25) GUICtrlSetState(-1, $GUI_DISABLE) Global Const $cidButton2 = GUICtrlCreateButton("Select Batch File", 560, 568, 99, 25) Global Const $cidButton3 = GUICtrlCreateButton("Exit", 8, 568, 75, 25) GUISetState(@SW_SHOW) Global $fBatch, $nMsg While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE, $cidButton3 GUIDelete() Exit Case $cidButton1 Run_Batch($fBatch) Case $cidButton2 $fBatch = FileOpenDialog("Select a batch file to start", "", "Batch (*.bat;*.cmd)") If Not @error Then GUICtrlSetState($cidButton1, $GUI_ENABLE) EndSwitch WEnd Func Run_Batch($bfile) Local $pid = Run(@ComSpec & " /c " & $bfile, @ScriptDir, @SW_HIDE, $STDERR_MERGED) Local $line, $oldline _GUICtrlEdit_AppendText($cidEdit, $bfile & @CRLF) While Sleep(50) $line = StdoutRead($pid) & @LF If $oldline <> $line Then _GUICtrlEdit_AppendText($cidEdit, $line) $oldline = $line EndIf If Not ProcessExists($pid) Then ExitLoop Wend MsgBox(64, "Information", "Batch file has ended.", 10) EndFunc Func GetCMDVer() Local $foo = Run(@ComSpec & " /c ver", @SystemDir, @SW_HIDE, $STDERR_CHILD + $STDOUT_CHILD) Local $line While 1 $line &= StdoutRead($foo) If @error Then ExitLoop WEnd Return StringStripWS(StringStripCR($line), 3) EndFunc ;==>GetCMDVer Br, UEZ Link to comment Share on other sites More sharing options...
armoros Posted May 18, 2012 Share Posted May 18, 2012 UEZ's script is amazing but when i run a bat file it says "" is not recognized as an internal or external command,operable program or batch file."" All though it pop-ups a msgbox saying the bat file executed.. Am i doing something wrong ? You mean something like this? expandcollapse popup;coded by UEZ 2011 #include <Constants.au3> #include <EditConstants.au3> #include <GUIConstantsEx.au3> #include <GuiEdit.au3> #include <WindowsConstants.au3> Global Const $hGUI = GUICreate("Test", 800, 600) Global Const $cidEdit = GUICtrlCreateEdit("", 0, 0, 800, 561, BitOR($ES_AUTOVSCROLL, $ES_READONLY, $WS_HSCROLL, $WS_VSCROLL)) GUICtrlSetData(-1, GetCMDVer() & @CRLF & _ "Copyright (c) 2009 Microsoft Corporation. All rights reserved." & @CRLF & @CRLF & @HomeDrive & @HomePath & ">") GUICtrlSetFont(-1, 10, 600, 0, "Lucida Console") GUICtrlSetColor(-1, 0xC0C0C0) GUICtrlSetBkColor(-1, 0x000000) Global Const $cidButton1 = GUICtrlCreateButton("Run Batch", 704, 568, 75, 25) GUICtrlSetState(-1, $GUI_DISABLE) Global Const $cidButton2 = GUICtrlCreateButton("Select Batch File", 560, 568, 99, 25) Global Const $cidButton3 = GUICtrlCreateButton("Exit", 8, 568, 75, 25) GUISetState(@SW_SHOW) Global $fBatch, $nMsg While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE, $cidButton3 GUIDelete() Exit Case $cidButton1 Run_Batch($fBatch) Case $cidButton2 $fBatch = FileOpenDialog("Select a batch file to start", "", "Batch (*.bat;*.cmd)") If Not @error Then GUICtrlSetState($cidButton1, $GUI_ENABLE) EndSwitch WEnd Func Run_Batch($bfile) Local $pid = Run(@ComSpec & " /c " & $bfile, @ScriptDir, @SW_HIDE, $STDERR_MERGED) Local $line, $oldline _GUICtrlEdit_AppendText($cidEdit, $bfile & @CRLF) While Sleep(50) $line = StdoutRead($pid) & @LF If $oldline <> $line Then _GUICtrlEdit_AppendText($cidEdit, $line) $oldline = $line EndIf If Not ProcessExists($pid) Then ExitLoop Wend MsgBox(64, "Information", "Batch file has ended.", 10) EndFunc Func GetCMDVer() Local $foo = Run(@ComSpec & " /c ver", @SystemDir, @SW_HIDE, $STDERR_CHILD + $STDOUT_CHILD) Local $line While 1 $line &= StdoutRead($foo) If @error Then ExitLoop WEnd Return StringStripWS(StringStripCR($line), 3) EndFunc ;==>GetCMDVer Br, UEZ [font="verdana, geneva, sans-serif"] [/font] Link to comment Share on other sites More sharing options...
BrewManNH Posted May 18, 2012 Share Posted May 18, 2012 My guess would be that there's a space in the file name or path to the batch file. If I posted any code, assume that code was written using the latest release version unless stated otherwise. Also, if it doesn't work on XP I can't help with that because I don't have access to XP, and I'm not going to.Give a programmer the correct code and he can do his work for a day. Teach a programmer to debug and he can do his work for a lifetime - by Chirag GudeHow to ask questions the smart way! I hereby grant any person the right to use any code I post, that I am the original author of, on the autoitscript.com forums, unless I've specifically stated otherwise in the code or the thread post. If you do use my code all I ask, as a courtesy, is to make note of where you got it from. Back up and restore Windows user files _Array.au3 - Modified array functions that include support for 2D arrays. - ColorChooser - An add-on for SciTE that pops up a color dialog so you can select and paste a color code into a script. - Customizable Splashscreen GUI w/Progress Bar - Create a custom "splash screen" GUI with a progress bar and custom label. - _FileGetProperty - Retrieve the properties of a file - SciTE Toolbar - A toolbar demo for use with the SciTE editor - GUIRegisterMsg demo - Demo script to show how to use the Windows messages to interact with controls and your GUI. - Latin Square password generator Link to comment Share on other sites More sharing options...
UEZ Posted May 18, 2012 Share Posted May 18, 2012 Replace line 38 with this here: Local $pid = Run(@ComSpec & ' /c "' & $bfile & '"', @ScriptDir, @SW_HIDE, $STDERR_MERGED) and it should work properly. Btw, I extended this pseudo CMD box here: (alpha version). Br, UEZ Please don't send me any personal message and ask for support! I will not reply! Selection of finest graphical examples at Codepen.io The own fart smells best! ✌Her 'sikim hıyar' diyene bir avuç tuz alıp koşma!¯\_(ツ)_/¯ ٩(●̮̮̃•̃)۶ ٩(-̮̮̃-̃)۶ૐ Link to comment Share on other sites More sharing options...
armoros Posted May 18, 2012 Share Posted May 18, 2012 Yes that made the trick..very nice UEZ thank you... [font="verdana, geneva, sans-serif"] [/font] Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now