Jump to content

Recommended Posts

;; suggested filename: "SplitLineMerge.au3"
;; Just run(build) it on it self to test it. (SciTe4AutoIt3)
;; Generally tested. (possible rare exceptions ignored.)
;; ... Not intended to be used on none Obfuscated au3 files.

;; include these 3 lines in your source code. (with <foobar> parts adjusted to your situation.)
#AutoIt3Wrapper_Run_Obfuscator=y
#Obfuscator_Parameters=/so
#AutoIt3Wrapper_Run_After=<Filespec_To_AutoIt3.exe, (not accepting quotes:?)> /AutoIt3ExecuteScript "<Path_To>\SplitLineMerge.au3" "%in%"

DebugOut('>Running: Obfuscated_SplitLineMerge,  CMD: ' & $CmdLineRaw)
If Not $CmdLine[0] Then DebugOut_Exit('!>No CmdLine input.', 1)
If Not IsFile($CmdLine[1]) Then DebugOut_Exit('!>Target source file not found.', 3)
_SplitLineMerge($CmdLine[1])
Exit

Func _SplitLineMerge($sFile_Au3)
    If StringRight($sFile_Au3, 4) <> '.au3' Then _
            DebugOut_Exit('!>Target file not a ".au3" file.', 4)

    Local $sFile_Source = StringTrimRight($sFile_Au3, 4) & '_Obfuscated.au3'
    If Not IsFile($sFile_Source) Then _
            DebugOut_Exit('!>Target "*_Obfuscated.au3" file not found.', 5)

    Local $sCode = FileRead($sFile_Source)
    $sCode = StringReplace($sCode, ' _' & @CRLF, ' ', 0, 2)
    Local $iCount = @extended

    Local $sFile_Target = StringTrimRight($sFile_Source, 4) & '_MergedSplitLines.au3'
    If FileExists($sFile_Target) And Not FileExists($sFile_Target & '\') And Not FileDelete($sFile_Target) Then _
            DebugOut_Exit('!>FileDelete "' & $sFile_Target & '" failed.', 6)
    If Not FileWrite($sFile_Target, $sCode) Then _
            DebugOut_Exit('!>FileWrite "' & $sFile_Target & '" failed.', 7)

    DebugOut('+>"' & $sFile_Target & '" file written, ' & $iCount & ' lines merged.')
EndFunc
Func IsFile($sFile)
    Return FileExists($sFile) And Not FileExists($sFile & '\')
EndFunc
;; ---
Func DebugOut($1, $2 = 'fOObAr')
    If Not ($2 == 'fOObAr') Then $1 &= ' = ' & String($2)
    Return ConsoleWrite($1 & @CRLF)
EndFunc
Func DebugOut_Exit($1, $2 = 0)
    ConsoleWrite($1 & @CRLF)
    Exit $2
EndFunc

(Edits: Title adjust, Title adjust 2, ...)

Edited by iEvKI3gv9Wrkd41u

"Straight_and_Crooked_Thinking" : A "classic guide to ferreting out untruths, half-truths, and other distortions of facts in political and social discussions."
"The Secrets of Quantum Physics" : New and excellent 2 part documentary on Quantum Physics by Jim Al-Khalili. (Dec 2014)

"Believing what you know ain't so" ...

Knock Knock ...
 

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By raj9039852537
      Hello all,
      I am trying to use script from This Link on windows 11. The script randomly crashes showing error about nonexistent variable at 
      $x = $pos^ This happens whenever start menu is opened.
      any solution?
    • By photonblaster
      I am looking for advice on next trouble shooting steps for my problem.  I have researched this over the last three days and still not solved it.  The main reason "run Scite works, exe doesnt" occurs seems to be duplicate names in executable files but I made sure I do not have that problem.
      I have a "trivial" script that watches for a login window to pop up, inserts PW and enter/closes.  It worked for a year then I experimented with #RequireAdmin on another problem and ran/compiled this one with RequireAdmin to check out what happens as a learning excercise.  Now the compiled version MUST be run with admin rights, and I get the UAC approval window  which I must avoid in my application, but the SciTe editor version runs from the tools menu (F5) just fine, no UAC.  The correlation between using RequireAdmin for a while  and the run problem is probably just a coincidence, but I am suspicious.
       
      #include <MsgBoxConstants.au3> ;#RequireAdmin ;trying with and without #requireadmin Opt("SendCapslockMode", 0) ;make sure caps are off Send("{CapsLock off}") Local $myTitle = "User Login Dialog" Local $myPW = "password" & "{ENTER} ; Wait max 10 seconds for the Sign In window to appear. If Not (WinWait($myTitle, "", 10)) Then MsgBox($MB_SYSTEMMODAL + $MB_ICONERROR, "Error", "LogIn window did not appear or is timed out") EndIf If WinActivate($myTitle) Then ControlSend($myTitle, "", "", $myPW ) ;alternate, also works in editor ;Send($myPW & "{ENTER}") ;MsgBox($MB_SYSTEMMODAL + $MB_ICONERROR, "INFO", "SENT $myPW enter") Else MsgBox($MB_SYSTEMMODAL + $MB_ICONERROR, "Error", "Sign In Window did not activate") EndIf Sleep(2000) If (WinExists($myTitle)) Then MsgBox($MB_SYSTEMMODAL + $MB_ICONERROR, "Error", "LOGIN FAILED") EndIf More info that may be relevant, at least as background info: The LogIn window is from a custom addin to Excel, does not have control ID access to the user/pw entry locations, just the enter/cancel buttons are found by AU3Info.  Thus I had to resort to Send, or ControlSend with just the default selection on popup of where the entries go.  Fortunately the UserID area remains populated between uses and the PW entry "window" is automatically selected at window popup so I just enter PW text and {enter}.
      I can run the compiled file as administrator, OK the UAC window "do you want to allow...", and it runs. (right click the file in file explorer, select "Run as Administrator".
      Trying to accept this issue I tried ways to "bypass" the UAC window.   I followed instructions on CNET to run the exe file as administrator automatically but the UAC window still comes up: Always run a program in administrator mode in Windows 10 - CNET
      I tried to create a shortcut to the exe file through the scheduler following these instructions (other links give the same set of instructions), did not seem to run at all, could not track down any errors I might have made. Open any program as administrator without UAC prompt (winaero.com)
      Is there any system settings permanently changed by RequireAdmin?  What should I look at to have the exe file run without the UAC window?
      Regards and stay healthy!
    • By mLipok
      Here is just some usefull script analyzer:
      #include <ColorConstants.au3> #include <GUIConstantsEx.au3> #include <MsgBoxConstants.au3> #include <StaticConstants.au3> #include <TreeViewConstants.au3> #include <WindowsConstants.au3> #include <File.au3> #include <Array.au3> ; just put a FileFullPath to one of your project _UsedInclude_API() _GetAllDependencies("c:\Program Files (x86)\AutoIt3\SciTE\SciTE Jump\SciTE Jump.au3") _UsedInclude_API() _GetAllDependencies("c:\Program Files (x86)\AutoIt3\SciTE\AutoIt3Wrapper\AutoIt3Wrapper.au3") _UsedInclude_API() _GetAllDependencies("c:\Program Files (x86)\AutoIt3\SciTE\SciTEConfig\SciteConfig.au3" ) _UsedInclude_API() _GetAllDependencies(@ScriptFullPath) Func _GetAllDependencies($sFileToCheck) GUICreate("My GUI with treeview", 500, @DesktopHeight - 40) Local $idTreeview = GUICtrlCreateTreeView(6, 6, 488, @DesktopHeight - 40 - 12, BitOR($TVS_HASBUTTONS, $TVS_HASLINES, $TVS_LINESATROOT, $TVS_DISABLEDRAGDROP, $TVS_SHOWSELALWAYS), $WS_EX_CLIENTEDGE) Local $idDisplayitem = GUICtrlCreateTreeViewItem($sFileToCheck, $idTreeview) GUICtrlSetColor(-1, $COLOR_GREEN) __UsedIncludeToTreeView($sFileToCheck, $idDisplayitem) Local $hItem = GUICtrlGetHandle($idDisplayitem) GUICtrlSendMsg($idTreeview, $TVM_EXPAND, $TVE_TOGGLE, $hItem) GUISetState(@SW_SHOW) Local $idMsg ; Loop until the user exits. While 1 $idMsg = GUIGetMsg() Select Case $idMsg = $GUI_EVENT_CLOSE ExitLoop EndSelect WEnd EndFunc ;==>_GetAllDependencies Func _GetUsedIncludeToArray($sAU3Content) Local $aIncludes = StringRegExp($sAU3Content, '(?im)^\s*#include\s?[''""<](.*)\.au3[''"">]', 3) If @error Then Return SetError(@error, @extended, '') Else Return SetError(0, 0, $aIncludes) EndIf EndFunc ;==>_GetUsedIncludeToArray Func __UsedIncludeToTreeView($sFileToCheck, $idTreeview_ref) $hFile = FileOpen($sFileToCheck, $FO_READ) $sAU3Content = FileRead($hFile) FileClose($hFile) Local $aIncludes = _GetUsedIncludeToArray($sAU3Content) If @error Then Return SetError(@error, @extended, '') Else Local $idDisplayitem, $iNumberOfOccurrences = 0 For $iInclude_Idx = 0 To UBound($aIncludes) - 1 $iNumberOfOccurrences = _UsedInclude_API($aIncludes[$iInclude_Idx]) If $iNumberOfOccurrences = 0 Then $idDisplayitem = GUICtrlCreateTreeViewItem($aIncludes[$iInclude_Idx], $idTreeview_ref) __UsedIncludeToTreeView(_GetDir($sFileToCheck) & $aIncludes[$iInclude_Idx] & '.au3', $idDisplayitem) ElseIf $iNumberOfOccurrences = 1 Then $idDisplayitem = GUICtrlCreateTreeViewItem($aIncludes[$iInclude_Idx] & ' (Was used before: once)', $idTreeview_ref) GUICtrlSetColor(-1, $COLOR_RED) ElseIf $iNumberOfOccurrences = 2 Then $idDisplayitem = GUICtrlCreateTreeViewItem($aIncludes[$iInclude_Idx] & ' (Was used before: twice)', $idTreeview_ref) GUICtrlSetColor(-1, $COLOR_PURPLE) ElseIf $iNumberOfOccurrences > 2 Then $idDisplayitem = GUICtrlCreateTreeViewItem($aIncludes[$iInclude_Idx] & ' (Was used before more then twice)', $idTreeview_ref) GUICtrlSetColor(-1, $COLOR_BLUE) EndIf Next EndIf EndFunc ;==>__UsedIncludeToTreeView Func _UsedInclude_API($sIncludeFileName = Default) Local Static $sIncludeAPI_Static = '|' ; reset If $sIncludeFileName = Default Then $sIncludeAPI_Static = '|' Return EndIf StringReplace($sIncludeAPI_Static, '|' & $sIncludeFileName & '|', '|' & $sIncludeFileName & '|') Local $iNumberOfReplacements = @extended $sIncludeAPI_Static &= $sIncludeFileName & '|' Return SetError(0, 0, $iNumberOfReplacements) EndFunc ;==>_UsedInclude_API Func _GetDir($sFileFullPath) Local $sDrive = "", $sDir = "", $sFileName = "", $sExtension = "" Local $aPathSplit = _PathSplit($sFileFullPath, $sDrive, $sDir, $sFileName, $sExtension) Return $sDrive & $sDir EndFunc ;==>_GetDir  
      Have fun.
      mLipok
       
    • By tarretarretarre
      About AutoIt-DD
      AutoIt-DD is an carbon copy of Laravels dd helper. DD stands for "Dump and DIE" and is a great tool for debugging AutoIt variables
      Features
      Get useful information about any AutoIt variable Nested Arrays and Scripting dictionaries Multi DIM arrays Great structure and colored output Example
      In Example.au3 you can run a fully featured example, but I also provided a print screen for you lazy people
    • By tarretarretarre
      About AutoIt-DD
      AutoIt-DD is an carbon copy of Laravels dd helper. DD stands for "Dump and DIE" and is a great tool for debugging AutoIt variables
      Features
      Get useful information about any AutoIt variable Nested Arrays and Scripting dictionaries Multi DIM arrays Great structure and colored output Example
      In Example.au3 you can run a fully featured example, but I also provided a print screen for you lazy people
      Dowonload
       
×
×
  • Create New...