Jump to content

Yet another checkbox issue

Saitoh183

By Saitoh183,
in AutoIt GUI Help and Support

 Share

Recommended Posts

Saitoh183 Seeker

Saitoh183

Posted
Posted

I have been trying to figure out why i cannot seem to get the proper value for my checkbox. Here is a snippet of my code:

#include <ButtonConstants.au3>
#include <EditConstants.au3>
#include <GUIConstantsEx.au3>
#include <StaticConstants.au3>
#include <TabConstants.au3>
#include <WindowsConstants.au3>
#Region ### START Koda GUI section ### Form=
$Form_opt = GUICreate("Form_opt", 615, 438, 1044, 160)
$Tab1 = GUICtrlCreateTab(32, 8, 553, 385)
$Label1 = GUICtrlCreateLabel("", 0, 376, 612, 4, $SS_SUNKEN)
$OK = GUICtrlCreateButton("OK", 104, 392, 81, 25)
$Cancel = GUICtrlCreateButton("Cancel", 408, 392, 81, 25)
$Saveset = GUICtrlCreateButton("Save", 256, 392, 81, 25)
GUISetState(@SW_SHOW)
#EndRegion ### END Koda GUI section ###
;TheRenamer TAB ######################################
$TRtab = GUICtrlCreateTabItem("TheRenamer")
GUICtrlSetState(-1,$GUI_SHOW)
GUICtrlSetTip(-1, "Set TheRenamer Path")
$x86 = GUICtrlCreateCheckbox("Windows 32bit", 40, 64, 89, 17)
$x64 = GUICtrlCreateCheckbox("Windows 64bit", 40, 96, 89, 17)
$custom = GUICtrlCreateCheckbox("Custom path",  40, 168, 81, 17)
$custompath = GUICtrlCreateInput("", 41, 192, 393, 21)
GUICtrlSetState(-1, $Gui_disable)
$win = GUICtrlRead($x86) or GUICtrlRead($x64)
$win64cus = GUICtrlRead($custom)or GUICtrlRead($x64)
$win86cus = GUICtrlRead($custom)or GUICtrlRead($x86)
;###################################################
Global $iniTRpathinfo
While 1
    $msg = GuiGetMsg()
    Switch $msg
        Case $GUI_EVENT_CLOSE
            Exit
 
  Case $custom
   If $win = $GUI_CHECKED Then
    GUICtrlSetState($x86, $GUI_UNCHECKED + $gui_enable)
    GUICtrlSetState($x64, $GUI_UNCHECKED + $gui_enable)
    GUICtrlSetState($custom, $GUI_disable)
    GUICtrlSetState($custompath, $Gui_enable)
   EndIf
  Case $x86
   If $win64cus = $GUI_CHECKED Then
    GUICtrlSetState($custom, $GUI_UNCHECKED + $gui_enable)
    GUICtrlSetState($x64, $GUI_UNCHECKED + $gui_enable)
    GUICtrlSetState($custompath, $Gui_disable)
    GUICtrlSetState($x86, $GUI_disable)
   EndIf
  Case $x64
   If $win86cus = $GUI_CHECKED Then
    GUICtrlSetState($custom, $GUI_UNCHECKED + $gui_enable)
    GUICtrlSetState($x86, $GUI_UNCHECKED + $gui_enable)
    GUICtrlSetState($custompath, $Gui_disable)
    GUICtrlSetState($x64, $GUI_disable)
   EndIf
  Case $Anime
   If GUICtrlRead($anime) = $gui_checked Then
    GUICtrlSetState($ani_fetch, $Gui_enable)
    GUICtrlSetState($ani_Arch, $Gui_enable)
   ElseIf GUICtrlRead($anime) = $gui_unchecked Then
    GUICtrlSetState($ani_fetch, $Gui_disable)
    GUICtrlSetState($ani_Arch, $Gui_disable)
   endif
  Case $extra
   If GUICtrlRead($extra) = $gui_checked Then
    GUICtrlSetState($ext_fetch, $Gui_enable)
    GUICtrlSetState($ext_Arch, $Gui_enable)
   ElseIf GUICtrlRead($extra) = $gui_unchecked Then
    GUICtrlSetState($ext_fetch, $Gui_disable)
    GUICtrlSetState($ext_Arch, $Gui_disable)
   endif
  Case $ok
  Case $cancel
  Case $saveset
   If BitAND(GUICtrlGetState($x86),$gui_checked) = $gui_checked Then
    ConsoleWrite(GUICtrlGetState($x86) & BitAND(GUICtrlGetState($x86),$gui_checked) = $gui_checked)
    $iniTRpathinfo = '"C:\Program Files\theRenamer\theRenamer.exe"'
   ElseIf GUICtrlRead($x64) = 1 Then
    $iniTRpathinfo = '"C:\Program Files (x86)\theRenamer\theRenamer.exe"'
   Else
    $iniTRpathinfo = GUICtrlRead($custompath)
   EndIf
IniWrite("msettings.ini", "therenamer", "Path", $iniTRpathinfo)
   EndSwitch
WEnd

The problem is this part :

Case $saveset
   If BitAND(GUICtrlGetState($x86),$gui_checked) = $gui_checked Then
    ConsoleWrite(GUICtrlGetState($x86) & BitAND(GUICtrlGetState($x86),$gui_checked) = $gui_checked)
    $iniTRpathinfo = '"C:\Program Files\theRenamer\theRenamer.exe"'
   ElseIf GUICtrlRead($x64) = 1 Then
    $iniTRpathinfo = '"C:\Program Files (x86)\theRenamer\theRenamer.exe"'
   Else
    $iniTRpathinfo = GUICtrlRead($custompath)
   EndIf

For some reason, 

ElseIf GUICtrlRead($x64) = 1 Then
 
    $iniTRpathinfo = '"C:\Program Files (x86)\theRenamer\theRenamer.exe"'
   Else
Works but 
If BitAND(GUICtrlGetState($x86),$gui_checked) = $gui_checked Then
 
    ConsoleWrite(GUICtrlGetState($x86) & BitAND(GUICtrlGetState($x86),$gui_checked) = $gui_checked)

This always returns 4 even if the box is checked

What could be the problem. BTW im new to this :graduated:

Link to comment
Share on other sites
BrewManNH Universalist

BrewManNH

Posted
Posted

Use If GUICtrlRead($x86) = $GUI_CHECKED then instead of using getstate and see how it works for your script.

If I posted any code, assume that code was written using the latest release version unless stated otherwise. Also, if it doesn't work on XP I can't help with that because I don't have access to XP, and I'm not going to.
Give a programmer the correct code and he can do his work for a day. Teach a programmer to debug and he can do his work for a lifetime - by Chirag Gude
How to ask questions the smart way!

I hereby grant any person the right to use any code I post, that I am the original author of, on the autoitscript.com forums, unless I've specifically stated otherwise in the code or the thread post. If you do use my code all I ask, as a courtesy, is to make note of where you got it from.

Back up and restore Windows user files _Array.au3 - Modified array functions that include support for 2D arrays.  -  ColorChooser - An add-on for SciTE that pops up a color dialog so you can select and paste a color code into a script.  -  Customizable Splashscreen GUI w/Progress Bar - Create a custom "splash screen" GUI with a progress bar and custom label.  -  _FileGetProperty - Retrieve the properties of a file  -  SciTE Toolbar - A toolbar demo for use with the SciTE editor  -  GUIRegisterMsg demo - Demo script to show how to use the Windows messages to interact with controls and your GUI.  -   Latin Square password generator

Link to comment
Share on other sites
AdmiralAlkex Universalist

AdmiralAlkex

Posted
Posted

If you look in the helpfile at GUICtrlRead() it tell you this:

For Checkbox, Radio control several states can be returned as $GUI_FOCUS and $GUI_CHECKED,. So use i.e. BitAnd(GUICtrlRead($Item),$GUI_CHECKED) to test if the control is checked.

So you should use BitAnd() to make sure the return from GUICtrlRead() is checked correctly...

.Some of my scripts: ShiftER, Codec-Control, Resolution switcher for HTC Shift
Some of my UDFs: SDL UDF, SetDefaultDllDirectories, Converting GDI+ Bitmap/Image to SDL Surface

Link to comment
Share on other sites
Saitoh183 Seeker

Saitoh183

Posted
  • Author
Posted

im having yet another issue with my script. its still checkbox related but im trying to use a Array within my Switch Case.

Here is my test script

#include <ButtonConstants.au3>
#include <EditConstants.au3>
#include <GUIConstantsEx.au3>
#include <StaticConstants.au3>
#include <TabConstants.au3>
#include <WindowsConstants.au3>
#include <Array.au3>
#Region ### START Koda GUI section ### Form=
$Form_opt = GUICreate("Form_opt", 615, 438, 1044, 160)
$Tab1 = GUICtrlCreateTab(32, 8, 553, 385)
$Label1 = GUICtrlCreateLabel("", 0, 376, 612, 4, $SS_SUNKEN)
$OK = GUICtrlCreateButton("OK", 104, 392, 81, 25)
$Cancel = GUICtrlCreateButton("Cancel", 408, 392, 81, 25)
$Saveset = GUICtrlCreateButton("Save", 256, 392, 81, 25)
GUISetState(@SW_SHOW)
#EndRegion ### END Koda GUI section ###  
;TheRenamer TAB ######################################
$TRtab = GUICtrlCreateTabItem("TheRenamer")
GUICtrlSetState(-1,$GUI_SHOW)
GUICtrlSetTip(-1, "Set TheRenamer Path")
Global $x86 = GUICtrlCreateCheckbox("Windows 32bit", 40, 64, 89, 17)
$x64 = GUICtrlCreateCheckbox("Windows 64bit", 40, 96, 89, 17)
$custom = GUICtrlCreateCheckbox("Custom path",  40, 168, 81, 17)
$custompath = GUICtrlCreateInput("", 41, 192, 393, 21)
GUICtrlSetState(-1, $Gui_disable)
;CheckboxChecked########################################
$win = GUICtrlRead($x86) or GUICtrlRead($x64)
$win64cus = GUICtrlRead($custom)or GUICtrlRead($x64)
$win86cus = GUICtrlRead($custom)or GUICtrlRead($x86)
;####################################################
;Fetching Extra TAB#########################################
$Fetext = GUICtrlCreateTabItem("Fetching / Extras")
GUICtrlSetTip(-1, "")
$Anime = GUICtrlCreateCheckbox("  Anime", 36, 49, 81, 17)
$Ani_fetch_lab = GUICtrlCreateLabel("Anime Fetch Folder :", 36, 73, 101, 17)
$Ani_fetch = GUICtrlCreateInput("", 36, 91, 393, 21)
GUICtrlSetState(-1, $Gui_disable)
$Ani_arch_lab = GUICtrlCreateLabel("Anime Archive Folder :", 36, 121, 110, 17)
$Ani_arch = GUICtrlCreateInput("", 36, 145, 393, 21)
GUICtrlSetState(-1, $Gui_disable)
$Extra = GUICtrlCreateCheckbox("  Extra", 36, 177, 81, 17)
$ext_fetch_lab = GUICtrlCreateLabel("Extra Fetch Folder :", 36, 201, 96, 17)
$ext_fetch = GUICtrlCreateInput("", 36, 225, 393, 21)
GUICtrlSetState(-1, $Gui_disable)
$ext_arch_lab = GUICtrlCreateLabel("Extra  Archive Folder :", 36, 249, 108, 17)
$ext_arch = GUICtrlCreateInput("", 36, 273, 393, 21)
GUICtrlSetState(-1, $Gui_disable)
$TV_fet = GUICtrlCreateCheckbox("TV Fetcher", 36, 305, 81, 17)
GUICtrlSetTip(-1, "If TV Settings are activated in TheRename, check this box")
$Mov_fet = GUICtrlCreateCheckbox("Movie Fetcher", 36, 337, 89, 17)
GUICtrlSetTip(-1, "If Movie Settings are activated in TheRename, check this box")
;LOG TAB#########################################
$Logtab = GUICtrlCreateTabItem("Log Settings")
$TVlog_lab = GUICtrlCreateCheckbox("TV Log name", 36, 49, 79, 17)
$TVlogname = GUICtrlCreateInput("", 36, 73, 113, 21)
GUICtrlSetState(-1, $Gui_disable)
GUICtrlSetLimit(-1, 12)
GUICtrlSetTip(-1, 'Max 12 letters (no extension".log")')
$TVlogpath_lab = GUICtrlCreateLabel("TV Log Path :", 188, 49, 70, 17)
$TVlogpath = GUICtrlCreateInput("", 188, 73, 393, 21)
GUICtrlSetState(-1, $Gui_disable)
$Movlogname = GUICtrlCreateInput("", 36, 145, 113, 21)
GUICtrlSetState(-1, $Gui_disable)
GUICtrlSetLimit(-1, 12)
GUICtrlSetTip(-1, 'Max 12 letters (no extension".log")')
$Movlogpath = GUICtrlCreateInput("", 188, 145, 393, 21)
GUICtrlSetState(-1, $Gui_disable)
$Movlogpath_lab = GUICtrlCreateLabel("Movie Log Path :", 188, 121, 85, 17)
$Movlog_lab = GUICtrlCreateCheckbox("Movie Log name", 36, 121, 95, 17)
$Anilogname = GUICtrlCreateInput("", 36, 217, 113, 21)
GUICtrlSetState(-1, $Gui_disable)
GUICtrlSetLimit(-1, 12)
GUICtrlSetTip(-1, 'Max 12 letters (no extension".log")')
$Anilogpath = GUICtrlCreateInput("", 188, 217, 393, 21)
GUICtrlSetState(-1, $Gui_disable)
$Anilogpath_lab = GUICtrlCreateLabel("Anime Log Path :", 188, 193, 85, 17)
$Anilog_lab = GUICtrlCreateCheckbox("Anime Log name", 36, 193, 95, 17)
$extlogname = GUICtrlCreateInput("", 36, 289, 113, 21)
GUICtrlSetState(-1, $Gui_disable)
GUICtrlSetLimit(-1, 12)
GUICtrlSetTip(-1, 'Max 12 letters (no extension".log")')
$extlogpath = GUICtrlCreateInput("", 188, 289, 393, 21)
GUICtrlSetState(-1, $Gui_disable)
$extlogpath_lab = GUICtrlCreateLabel("Extra Log Path :", 188, 265, 80, 17)
$extlogname_lab = GUICtrlCreateCheckbox("Extra Log name", 36, 265, 95, 17)
Global $iniTRpathinfo, $inianime1, $inianime2, $s_inianime, $iniextra1, $iniextra2, $s_iniextra
Global $test[4][3]=[["$TVlog_lab", "$TVlogname", "$TVlogpath"],["$Movlog_lab", "$Movlogname", "$Movlogpath"], _
["$Anilog_lab", "$Anilogname", "$Anilogpath"], ["$extlog_lab", "$extlogname", "$extlogpath" ]]
_ArrayDisplay($test,"")
While 1
    $msg = GuiGetMsg()
    Switch $msg
        Case $GUI_EVENT_CLOSE
            Exit
 
  Case $custom
   If $win = $GUI_CHECKED Then
    GUICtrlSetState($x86, $GUI_UNCHECKED + $gui_enable)
    GUICtrlSetState($x64, $GUI_UNCHECKED + $gui_enable)
    GUICtrlSetState($custom, $GUI_disable)
    GUICtrlSetState($custompath, $Gui_enable)
   EndIf
  Case $x86
   If $win64cus = $GUI_CHECKED Then
    GUICtrlSetState($custom, $GUI_UNCHECKED + $gui_enable)
    GUICtrlSetState($x64, $GUI_UNCHECKED + $gui_enable)
    GUICtrlSetState($custompath, $Gui_disable)
    GUICtrlSetState($x86, $GUI_disable)
   EndIf
  Case $x64
   If $win86cus = $GUI_CHECKED Then
    GUICtrlSetState($custom, $GUI_UNCHECKED + $gui_enable)
    GUICtrlSetState($x86, $GUI_UNCHECKED + $gui_enable)
    GUICtrlSetState($custompath, $Gui_disable)
    GUICtrlSetState($x64, $GUI_disable)
   EndIf
  Case $Anime
   If GUICtrlRead($anime) = $gui_checked Then
    GUICtrlSetState($ani_fetch, $Gui_enable)
    GUICtrlSetState($ani_Arch, $Gui_enable)
   ElseIf GUICtrlRead($anime) = $gui_unchecked Then
    GUICtrlSetState($ani_fetch, $Gui_disable)
    GUICtrlSetState($ani_Arch, $Gui_disable)
   endif
  Case $extra
   If GUICtrlRead($extra) = $gui_checked Then
    GUICtrlSetState($ext_fetch, $Gui_enable)
    GUICtrlSetState($ext_Arch, $Gui_enable)
   ElseIf GUICtrlRead($extra) = $gui_unchecked Then
    GUICtrlSetState($ext_fetch, $Gui_disable)
    GUICtrlSetState($ext_Arch, $Gui_disable)
   endif
  Case $test[0][0] to $test[3-1][0]
   For $y = 0 To 3 - 1
   if $msg = $test[$y][0] then
   If GUICtrlRead($test[$y][0]) = $gui_checked Then
    ConsoleWrite($test[$y][0] & @crlf & $test[$y][1] & @crlf & $test[$y][2]) ; <===== to check if its ouputing anything
    GUICtrlSetState($test[$y][1], $Gui_enable)
    GUICtrlSetState($test[$y][2], $Gui_enable)
   ElseIf GUICtrlRead($test[$y][0]) = $gui_unchecked Then
    GUICtrlSetState($test[$y][1], $Gui_disable)
    GUICtrlSetState($test[$y][2], $Gui_disable)
   EndIf
   endif
   Next
  EndSwitch
WEnd

And here is the part of script that is repetitive that i want to transform into a Array within my Switch Case (i have other repetitive scriplets but if i figure out 1 the rest will follow)

Case $TVlog_lab
   If GUICtrlRead($TVlog_lab) = $gui_checked Then
    GUICtrlSetState($TVlogname, $Gui_enable)
    GUICtrlSetState($TVlogpath, $Gui_enable)
   ElseIf GUICtrlRead($TVlog_lab) = $gui_unchecked Then
    GUICtrlSetState($TVlogname, $Gui_disable)
    GUICtrlSetState($TVlogpath, $Gui_disable)
   endif
  Case $Movlog_lab
   If GUICtrlRead($Movlog_lab) = $gui_checked Then
    GUICtrlSetState($Movlogname, $Gui_enable)
    GUICtrlSetState($Movlogpath, $Gui_enable)
   ElseIf GUICtrlRead($Movlog_lab) = $gui_unchecked Then
    GUICtrlSetState($Movlogname, $Gui_disable)
    GUICtrlSetState($Movlogpath, $Gui_disable)
   endif
  Case $Anilog_lab
   If GUICtrlRead($Anilog_lab) = $gui_checked Then
    GUICtrlSetState($Anilogname, $Gui_enable)
    GUICtrlSetState($Anilogpath, $Gui_enable)
   ElseIf GUICtrlRead($Anilog_lab) = $gui_unchecked Then
    GUICtrlSetState($Anilogname, $Gui_disable)
    GUICtrlSetState($Anilogpath, $Gui_disable)
   endif
  Case $TVlog_lab
   If GUICtrlRead($TVlog_lab) = $gui_checked Then
    GUICtrlSetState($TVlogname, $Gui_enable)
    GUICtrlSetState($TVlogpath, $Gui_enable)
   ElseIf GUICtrlRead($TVlog_lab) = $gui_unchecked Then
    GUICtrlSetState($TVlogname, $Gui_disable)
    GUICtrlSetState($TVlogpath, $Gui_disable)
   endif

The part im trying to create

Case $test[0][0] to $test[3-1][0]
   For $y = 0 To 3 - 1
   if $msg = $test[$y][0] then
   If GUICtrlRead($test[$y][0]) = $gui_checked Then
    ConsoleWrite($test[$y][0] & @crlf & $test[$y][1] & @crlf & $test[$y][2]) ; <===== to check if its ouputing anything
    GUICtrlSetState($test[$y][1], $Gui_enable)
    GUICtrlSetState($test[$y][2], $Gui_enable)
   ElseIf GUICtrlRead($test[$y][0]) = $gui_unchecked Then
    GUICtrlSetState($test[$y][1], $Gui_disable)
    GUICtrlSetState($test[$y][2], $Gui_disable)
   EndIf
   endif

I based myself of this post

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...