Jump to content

Recommended Posts

I'm trying to create a small script to press a few keys after two mouse clicks. Below is the script that I wrote. For some reason it does the Send command after only one click, then it waits until I click again.

#Include <Misc.au3> ; required for _IsPressed
$dll = DllOpen("user32.dll")
Dim $x = 0
 
While 1
  While $x < 2
    If _IsPressed("01", $dll) Or _IsPressed("02", $dll) Then
     $x = $x + 1
    EndIf
  WEnd
  Send("{UP 4}{ENTER}{ENTER}")
  $x = 0
WEnd

This version works after one click, and gives me 1 1/2 seconds to make the second click before calling the Send command. But I'd prefer to get AutoIt to wait for the second click without using the Sleep function. Any ideas?

While 1
    While 1
        If _IsPressed("01", $dll) Or _IsPressed("02", $dll) Then ExitLoop
    WEnd
    Sleep(1500)
    Send("{UP 4}{ENTER}{ENTER}")
WEnd
Link to post
Share on other sites

I expect it's because you only test to see if the button is pressed and it will loop round fast and get to a count of 2 before the button is released. You need to wait fo rth ebutton to be released before you check to see if it's pressed again.

Something like this maybe but I haven't tested it.

#include <Misc.au3> ; required for _IsPressed
$dll = DllOpen("user32.dll")
Dim $x = 0

While 1
    While $x < 2
        If _IsPressed("01", $dll) Then
             waittilnotpressed("01", $x)
        ElseIf _IsPressed("02", $dll) Then
            waittilnotpressed("02", $x)
        EndIf
    WEnd
    Send("{UP 4}{ENTER}{ENTER}")
    $x = 0
WEnd

Func waittilnotpressed($skey, ByRef $y)
    $y = $y + 1
    While _IsPressed($skey, $dll)
        Sleep(20)
    WEnd
EndFunc   ;==>waittilnotpressed
Serial port communications UDF Includes functions for binary transmission and reception.printing UDF Useful for graphs, forms, labels, reports etc.Add User Call Tips to SciTE for functions in UDFs not included with AutoIt and for your own scripts.Functions with parameters in OnEvent mode and for Hot Keys One function replaces GuiSetOnEvent, GuiCtrlSetOnEvent and HotKeySet.UDF IsConnected2 for notification of status of connected state of many urls or IPs, without slowing the script.
Link to post
Share on other sites

shmuelw1,

Sorry for the idiot response earlier. Testing and investigation indicate that this is, as Martin says, related to typematic rate and key bounce. One possible solution: low level keyboard handler and increment your counter at mouse up instead of mouse down. For example of LL keyboard handler see the help file or this thread

kylomas

Forum Rules         Procedure for posting code

"I like pigs.  Dogs look up to us.  Cats look down on us.  Pigs treat us as equals."

- Sir Winston Churchill

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Jamestay97
      Hello! Thanks you for looking at my post
      **No source code I'm sorry work related can't copy information**
      I've been using autoit for about 1 year. 
      I'm having trouble automating a click on an internet explorer web page and I've tried a lot of examples from help pages and forums already. The object I'm trying to click on isnt always in the same spot so I can't use mouse click or control click, I have tried to use the different get collection options and clickbyname, or index or get object. I'm just struggling. 
      Description of object I'm trying to click -- 
      HTML Code looks like <a ng-click.. "Click Here" it appears it's just a click able object named "click here" that opens a hidden window by running a script inside the web page. I'm not able to grab the information from the window unless it's open so I have to automate this click somehow. 
       
      I understand it's difficult to assist without having something to look at, I apologize for that sincerely and appreciate and assistance and suggestions. 
    • By nacerbaaziz
      good morning all.
      first lit me give you all a thinks to your help
      you're help me allot thank you all.
      sirs today i've a new problem
      it's not a problem but thing i want to add it to blind accessability.
      the ListBox can send a notification when the user send a double click on it items
      but as we know that the blind users can't use the mouse for that they use the keybord to navigate.
      as we know that the enter replace the double click on the keybord
      for that i need when the user send a inter above any listBox item the list send a double click notification.
      i know some of you tell me that i can use the  GUISetAccelerators function
      but the enter has a other tasks such as leav a blanc line on edits and activate the defaultButton and other tasks.
      that what i need and i hope that you can help me
      this is a simple example.
      #include <GUIConstantsEx.au3> #include <StructureConstants.au3> #include <MsgBoxConstants.au3> #include <WindowsConstants.au3> #include <ListBoxConstants.au3> Example() Func Example() Local $sMESSAGE = "The following buttons have been clicked" GUICreate("My GUI list") ; will create a dialog box that when displayed is centered Local $idButton_Add = GUICtrlCreateButton("Add", 64, 32, 75, 25) Local $idButton_Clear = GUICtrlCreateButton("Clear", 64, 72, 75, 25) global $idMylist = GUICtrlCreateList("buttons that have been clicked", 176, 32, 121, 97) GUICtrlSetLimit(-1, 200) ; to limit horizontal scrolling GUICtrlSetData(-1, $sMESSAGE) global $DummyList = GUICtrlCreateDummy() GUICtrlSendToDummy($DummyList, 1) Local $idButton_Close = GUICtrlCreateButton("my closing button", 64, 160, 175, 25) GUIRegisterMsg($WM_command, "WM_command") GUISetState(@SW_SHOW) ; Loop until the user exits. While 1 Switch GUIGetMsg() Case $GUI_EVENT_CLOSE ExitLoop Case $idButton_Add GUICtrlSetData($idMylist, "You clicked button No1|") Case $idButton_Clear GUICtrlSetData($idMylist, "") Case $idButton_Close MsgBox($MB_SYSTEMMODAL, "", "the closing button has been clicked", 2) Exit case $DummyList $g_iTemp = GUICtrlRead($DummyList) if $g_iTemp = $LBN_DBLCLK then ;$LBN_DBLCLK then msgBox(64, "", "") endIf GUICtrlSendToDummy($DummyList, 0) EndSwitch WEnd EndFunc ;==>Example Func WM_command($hWnd, $iMsg, $wParam, $lParam) #forceref $hWnd, $iMsg Local $tNMHDR = DllStructCreate($tagNMHDR, $lParam) $hWndFrom = $lParam $iCode = BitShift($wParam, 16) ; Hi Word Switch $hWndFrom Case GUICtrlGetHandle($idMylist) Switch $iCode Case $LBN_SELCHANGE, $LBN_DBLCLK, $LBN_SELCANCEL, $LBN_SETFOCUS GUICtrlSendToDummy($DummyList, $iCode) case else ;GUICtrlSendToDummy($DummyTreeview, 1) EndSwitch EndSwitch Return $GUI_RUNDEFMSG EndFunc  
    • By _leo_
      Hey there!
      I am having a problem with clicking a button in IE. As you can see in the code, there would be a class name to click it, but since this button exists several times with exactly the same code, I can only use the "Noch nicht veröffentlicht" to separate it from the others. But this part is just pure text without any classification. 
      "<div class="checkmark" data-v-1e5b1f70=""><svg xmlns="http://www.w3.org/2000/svg" class="icon" viewBox="0 0 16 16" data-v-1e5b1f70=""><circle cx="8" cy="8" r="8" data-v-1e5b1f70="" /></svg></div>Noch nicht veröffentlicht"
      I was trying to click it with:
      #include <IE.au3> local $oNNVs = _IEFormGetCollection($oIE2) For $oNNV in $oNNVs If String($oNNV.innertext) = "Noch nicht veröffentlicht" Then _IEAction($oNNV, "click") EndIf Next and:
      $inputs = $oIE2.document.getElementsByTagName("div") For $input In $inputs If $input.innertext == "Noch nicht veröffentlicht" then $input.click() EndIf Next But nothing seems to work. Thanks for the help!
    • By XinYoung
      Greetings!
      I am in need of your guidance once again. I searched the forums for clicking in span, clicking by class, clicking without an ID or Name, etc., but I am unable to find a solution for my problem.
      I am trying to expand this tree in IE. There is an arrow ( > ) that i need to click, but I can't find a way to do it . Alternatively, I can double-click the text "Servers", but that seems to be even more troublesome. I will have to do this 2-3 more times as the tree expands.
      There appears to be an ID for the tree, simply called "tree", but that isn't working when I send a click to it.

      ;Open an IE session and navigate to pgAdmin. Global $oIE = _IECreate($pgAdmin) ;Maximize the IE window. WinSetState(_IEPropertyGet($oIE, "hwnd"), "", @SW_MAXIMIZE) Sleep(2000) ;Expand the tree $oTree = _IEGetObjById($oIE, "tree") _IEAction($oTree, "click") Any ideas?  
    • By XinYoung
      Quick question: How can I click this "Select All" button in IE? There's no ID, and the href is "#"  
      Am I looking at the wrong html code?
      Am I looking
      Thank you all in advance!
×
×
  • Create New...