Jump to content

Recommended Posts

Hi Guys,

I was wondering if anyone had created a GUI with an embedded Virtual Machine? For those that do not use Virtual Centre you can access Virtual Machines via Internet Explorer and the VM loads in the IE window.

I would imagine its possible using:

ObjCreate

GUICtrlCreateObj

Does anyone happen to have an example of how this could be done?

Thank you

Link to post
Share on other sites

Hi Sleepy,

Thanks for that, i did give that a go however the link Virtual Centre creates is not like i have seen before:

https://vc1/ui/?wsUrl=http://localhost:80/sdk&mo=VirtualMachine|vm-1346&inventory=none&tabs=hide_

When this loads i immeditately hit "Page cannot be displayed" if i refresh i can get to the "invalid certificate do you want to continue" message but then cannot get passed that screen i assume something to do with it being a Https site?

Any ideas?

Thanks

Link to post
Share on other sites

There is a lot of embedding going on. You are trying to embed a link. And the link appears to be embedding another link. Notice the https and then a http?

Check out the following website that shows some instructions that look like it could create a simpler link. Perhaps that may help.

http://akutz.wordpress.com/2010/03/10/how-to-vsphere-client-to-vcenter-using-http/

#include <ByteMe.au3>

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By XGamerGuide
      ūüĎč Hey
      I want to call a function when something changes on an element in my GUI. That should work for a combo box (with $CBS_DROPDOWNLIST) when I select an item and for a text input when I type.
    • By NassauSky
      Hi all,
      The more projects I work on, the harder it is to find old scripts I created with certain techniques in them. I'd like to leave this here for others to get an idea from and it will be available now by keyword searching in this forum.
      This project needed an evenly distributed button grid setup on a touch screen with half decent sized buttons and spacing so the user would be less likely to press the key beside it. Here is one quick example to give anyone an idea of a way to handle it.
      #include <GUIConstants.au3> GUICreate("Button Grid", 1080, 100) ; will create a dialog box that when displayed is centered GUISetState(@SW_SHOW) ; will display an empty dialog box ;--Create and Position Controls Dim $btnActivated[1][2] ;Col 1 is button id, Col 2 is True/False used in 1 example as depressed Dim $btnArray[100][2] ;Col 1 is button id, Col 2 is True/False used in 1 example as depressed $num = 0 $btnActivated[0][0] = GUICtrlCreateButton("Activated", 0, 0, 100, 100) ;x,y,w,h $btnActivated[0][1] = True GUICtrlSetBkColor(-1,0x00ff00) GUICtrlSetColor(-1,0x005500) GUICtrlSetFont(-1,14) For $Y = 0 To 1 For $X = 0 To 7 ConsoleWrite( ($X * 100) + ($X*20) + 120 & @CRLF) If $Y=0 Then $btnArray[$num][0] = GUICtrlCreateButton($num + 1, ($X * 100) + ($X*20) + 120, 0, 100, 40) ;x,y,w,h Else $btnArray[$num][0] = GUICtrlCreateButton($num + 1, ($X * 100) + ($X*20) + 120, ($Y * 40) + $Y*20, 100, 40) ;x,y,w,h EndIf GUICtrlSetBkColor($btnArray[$num][0], 0xFFFFFF) $num += 1 Next Next ;--Set Button Names GUICtrlSetData($btnArray[0][0],"Autoit") GUICtrlSetData($btnArray[1][0],"Is") GUICtrlSetData($btnArray[2][0],"Cool") ; Run the GUI until the dialog is closed While 1 $msg = GUIGetMsg() Switch $msg Case $GUI_EVENT_CLOSE ExitLoop Case $btnActivated[0][0] $btnActivated[0][1] = NOT $btnActivated[0][1] If $btnActivated[0][1] Then GUICtrlSetBkColor($btnActivated[0][0],0x00ff00) GUICtrlSetColor($btnActivated[0][0],0x005500) GUICtrlSetData($btnActivated[0][0],"Activated") GUICtrlSetFont($btnActivated[0][0],14) Else GUICtrlSetBkColor($btnActivated[0][0],0xFF9999) GUICtrlSetColor($btnActivated[0][0],0x550000) GUICtrlSetData($btnActivated[0][0],"DeActivated") GUICtrlSetFont($btnActivated[0][0],13) EndIf Case $btnArray[0][0] If $btnActivated[0][1] Then MsgBox(0,"Notice","Btn1",1) EndIf Case $btnArray[1][0] If $btnActivated[0][1] Then MsgBox(0,"Notice","Btn2",1) EndIf Case $btnArray[2][0] If $btnActivated[0][1] Then MsgBox(0,"Notice","Btn3",1) EndIf EndSwitch WEnd I couldn't find one of my old projects that broke the button array into more columns that included the actual button name in the field. Feel free to share your own or share a more flexible version of this simple example.

    • By It_is_me_Me
      I am making some GUI with combobox for the Baudrates communications and I listed 9600, 57600, 115200. 
      I wrote the code to be defaulted to 57600 like this:
      GUICtrlSetData($comboBox_opticalBaudRate, "9600|57600|115200", "57600")
      But I wanted the GUI to remember the last item the user picks so the baudrates will NOT be defaulted to 57600.
      Example, I pick 9600 as my baudrates, then I close the GUI, after opening it, it always prompt 57600 since that is what I did in my code. But I want that if I choose 9600 and close the GUI, opening it again will show 9600 now instead of 57600.
      Is there a way to do it in GUI setting?
       
      Thanks.
    • By ashraful089
      #include <ButtonConstants.au3>
      #include <ComboConstants.au3>
      #include <GUIConstantsEx.au3>
      #include <WindowsConstants.au3>
      #Region ### START Koda GUI section ### Form=C:\Users\Engr. Ashraful\Videos\koda_1.7.3.0\Forms\ProgramPlayer\FormProgamToOpen.kxf
      $FormInput = GUICreate("Input", 302, 205, 454, 285)
      $Resolution = GUICtrlCreateCombo("Resolution", 80, 24, 145, 25)
      GUICtrlSetData(-1, "1920|VM1920|1366")
      $ComboProgramType = GUICtrlCreateCombo("Program Type Selection", 80, 64, 145, 25, BitOR($CBS_DROPDOWN,$CBS_AUTOHSCROLL))
      GUICtrlSetData(-1, "Multimedia|Official|Design|Web")
      $ButtonEnter = GUICtrlCreateButton("Enter", 104, 104, 75, 25)
      GUISetState(@SW_SHOW)
      #EndRegion ### END Koda GUI section ###
      While 1
          $nMsg = GUIGetMsg()
          Switch $nMsg
              Case $GUI_EVENT_CLOSE
                  Exit
          EndSwitch
      WEnd
       
      please help me to read combo box input and use the value for another function/ work
       
    • By Aapjuh
      Hi,
      I am having a problem properly saving the Width of a resizable Gui.
      When a user resizes the Gui it gets saved in an ini when the Gui closes to then restore the new Width upon reopening the app.
      with GUICreate("myGui",300,200,Default,Default,$WS_SIZEBOX)
      WinGetPos($hGUI) returns 314, and WinGetClientSize($hGUI) returns 298
      when its then saved in the ini the gui keeps expanding or shrinking every time its opened by +14 or -2
      I figure it has to do with borders etc, but i also guess borders depend on the window theme and whatnot or is user specific, so i can't just do $GuiWidth = $GetGuiWidth[arr] -14 or +2 right?

      is there a proper way of doing this?
      Thanks in advance,
      Aapjuh
×
×
  • Create New...