Jump to content

Recommended Posts

While i am waiting for Better Solutions for Finding Multiple @error Cases and React according to them, i am hoping that some1 could explain me what my problem in this (time consuming) function is..

The Idea is that i check for @Errors from the 3 PixelSearch i am doing, and give Message according to it.

I am changing Colors In Paint for Every Loop To Test If the Color Searches Are Correct.

All Cases are Working Fine, and the Right MsgBoxes are Triggered, Except the Case where all 3 Colors are Missing:

HotKeySet("{ESC}", "End")
Global $pixelSearchError1 = @error
Global $pixelSearchError2 = @error
Global $pixelSearchError3 = @error
While 1
Sleep(10)
$pixelsearch1 = PixelSearch(100,300,200,512,0x0000ff,10) ;Blue
$pixelSearchError1 = @error
$pixelsearch2 = PixelSearch(250,310,400,512,0xfa0000,10) ;Red
$pixelSearchError2 = @error
$pixelsearch3 = PixelSearch(500,300,600,512,0x00ff00,10) ;Green
$pixelSearchError3 = @error
Call("_errorcheck")
WEnd
Func _errorcheck()
    Sleep(100)
Select                                                        ;Check for Blue Color, Then Proceed.
        Case Not $pixelSearchError1                              ;Found Blue
            MsgBox(0,"Message","Blue Pixel Found!")
   Select                                                 ;Blue Found.  Now check for Red
    Case Not $pixelSearchError2                           ;Found Blue and Red
     MsgBox(0,"Message","Blue and Red Pixel Found!")
     Select                                       ;Blue and Red found. Now check for Green
      Case Not $pixelSearchError3                     ;Found Blue, Red and Green
        MsgBox(0,"Message","Blue,Red and Green Pixel Found!")
      Case $pixelSearchError3                             ;Blue, Red  But not Green
        MsgBox(0,"Message","Found Blue, Red But Not Green")
      EndSelect
    Case $pixelSearchError2          ;Blue Found, But Not Red
      MsgBox(0,"Message","Blue Found, But Not Red")
         Select                                       ;Blue and Red found. Now check for Green
          Case Not $pixelSearchError3                     ;Found Blue, Green But not Red
        MsgBox(0,"Message","Found Blue, Green But Not Red")
       Case $pixelSearchError3                          ;Blue, But not Red or Green
        MsgBox(0,"Message","Could only Find Blue")
      EndSelect
    EndSelect
  Case $pixelSearchError1                                    ;Blue Not Found
         MsgBox(0,"Message","Blue Pixel Not Found")
            Select                                                ;Blue Not Found.  Now check for Red
    Case Not $pixelSearchError2                           ;Found Red, But not Blue
     MsgBox(0,"Message","Found Red, But not Blue")
     Select                                       ;Found Red, But not Blue Now check for Green
      Case Not $pixelSearchError3                     ;Red and Green, but not Blue
        MsgBox(0,"Message","Red,Green But not Blue")
      Case $pixelSearchError3                             ;Red, But not  Blue or Green
        MsgBox(0,"Message","Could only Find Red")
      EndSelect
    Case $pixelSearchError2          ;Could not find Blue or Red
      MsgBox(0,"Message","Could not Find Blue and Red")
     Select                                       ;Blue and Red Not found. Now check for Green
      Case Not $pixelsearch3                      ;Only found Green
        MsgBox(0,"Message","Only found Green")
      Case $pixelSearchError3                           ;Did not Find Blue,Red or Green
        MsgBox(0,"Message","No Color was found")
     EndSelect
            EndSelect
    EndSelect
    Sleep(10)
EndFunc

I Made a Picture that should make it far easier to see where one Select Case Starts and Ends :D Check the Link Below.

http://imageshack.us/f/9/selectcasegreenerror.gif/

I can't see why the Last Case is not working.. When Blue,Red AND Green are Missing i still get the "Only found Green"

Please Help :)

Also, Building the Cases Like this takes up allot of Time and Space, so if you have a Easier way please Tell :)

Like:

If Not @error 1 And @error 2  And @error 3 Then

But i don't think that Works.

I probably want to run 5 PixelSearches and that would mean 5 Select an 32 Cases !!!1!!11

So it would be Great if there was another way of doing this ;)

If not, Please do still tell what the problem of my Function is ;)

Edited by Schoening
Link to post
Share on other sites

I usually don't work with pixels -- but perhaps something like this with a numbering system might give you an idea.

HotKeySet('{ESC}', 'End')
;
Local $aBlue, $aGreen, $aRed, $number, $string
;
While 1
    $number = 0

    $aBlue = PixelSearch(100, 300, 200, 512, 0x0000ff, 10); Blue
    If @error = 0 Then $number += 1
    $aRed = PixelSearch(250, 310, 400, 512, 0xfa0000, 10); Red
    If @error = 0 Then $number += 2
    $aGreen = PixelSearch(500, 300, 600, 512, 0x00ff00, 10); Green
    If @error = 0 Then $number += 4

    Switch $number
        Case 1
            $string = 'Blue'
        Case 2
            $string = 'Red'
        Case 3
            $string = 'Blue and Red'
        Case 4
            $string = 'Green'
        Case 5
            $string = 'Blue and Green'
        Case 6
            $string = 'Red and Green'
        Case 7
            $string = 'Blue, Red and Green'
        Case Else
            $string = 'No Matching Color'
    EndSwitch

    MsgBox(0, '', $string, 1)

    Sleep(10)
WEnd
;
Func End()
    Exit
EndFunc
;

"The mediocre teacher tells. The Good teacher explains. The superior teacher demonstrates. The great teacher inspires." -William Arthur Ward

Link to post
Share on other sites

Ah hah, look at the word in the first tab. "Bot".

If you can proof this topic is directly related to that file ... otherwise ... you just jumped the gun.

Where?

Screenshot. "*bot.1.au3" Edited by MvGulik

"Straight_and_Crooked_Thinking" : A "classic guide to ferreting out untruths, half-truths, and other distortions of facts in political and social discussions."
"The Secrets of Quantum Physics" : New and excellent 2 part documentary on Quantum Physics by Jim Al-Khalili. (Dec 2014)

"Believing what you know ain't so" ...

Knock Knock ...
 

Link to post
Share on other sites
  • Moderators

Guys,

While we are grateful that you all try to keep this forum the kind of place we all want it to be, please do not be too aggressive - particularly to newer members. If there is some doubt as to the legality of the subject (which does not seem to be the case here) just report the thread so that a Mod can take a look - that is why we are here. :)

M23

Public_Domain.png.2d871819fcb9957cf44f4514551a2935.png Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind

Open spoiler to see my UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Link to post
Share on other sites

Nice picture indeed.

Although I'm not really getting the problem. I suggest you take a look at how to use" Not( And Or )" and maybe also take a look at ContinueCase. That should allow you to flatten than monster (eek!) of nested selects. :)

Note the Not($var1 And/or $varN+1) use. The brackets are important here.

http://www.autoitscript.com/autoit3/docs/keywords/ContinueCase.htm

http://www.autoitscript.com/autoit3/docs/intro/lang_operators.htm

"Straight_and_Crooked_Thinking" : A "classic guide to ferreting out untruths, half-truths, and other distortions of facts in political and social discussions."
"The Secrets of Quantum Physics" : New and excellent 2 part documentary on Quantum Physics by Jim Al-Khalili. (Dec 2014)

"Believing what you know ain't so" ...

Knock Knock ...
 

Link to post
Share on other sites

Forgive me for asking this but would you mind posting a true picture of the app you are wanting to work with instead of an generic example? It may be helpful in that we may see a better way to optimize your search method.

This is all i got so far..

The only problem is that the Select Case @error Blue @error Red and @error Green Triggers Only Green ! And Not No Color Found.

I have Run all possibilities a few times.. and dont get it to work.

Link to post
Share on other sites

Could PixelSearch be a bit bugged?

I have now added a "Reset" after the Function:

While 1
Sleep(10)
$pixelsearch1 = PixelSearch(100,300,200,512,0x0000ff,10) ;Blue
$pixelSearchError1 = @error
$pixelsearch2 = PixelSearch(250,310,400,512,0xfa0000,10) ;Red
$pixelSearchError2 = @error
Call("_errorcheck")
$pixelSearchError1 = 0
$pixelSearchError2 = 0
$pixelSearchError3 = 0
$pixelsearch1 = 0
$pixelsearch2 = 0
$pixelsearch3 = 0
WEnd

But still the same problem

Link to post
Share on other sites

Good to see you found the problem.

Any Admin may {Solved} this one

You got the post count to do it yourself. Just go to your first post in this topic, switch to full edit mode for that post, and change the title to your liking. Edited by MvGulik

"Straight_and_Crooked_Thinking" : A "classic guide to ferreting out untruths, half-truths, and other distortions of facts in political and social discussions."
"The Secrets of Quantum Physics" : New and excellent 2 part documentary on Quantum Physics by Jim Al-Khalili. (Dec 2014)

"Believing what you know ain't so" ...

Knock Knock ...
 

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By mLipok
      Usually when I collect data from DataBase I need to give EndUser a possibility to select rows which should be taken in the processing loop.
      I was searching on the forum and I'm not able to find any UDF or even example of how to select data from array.
      I have my own solutions but I think they are not worth posting on the forum as it is very old code and I am looking for a better solution.

      Could anybody point me to some examples/solutions ?

      Thank you in advance.
      @mLipok
    • By Sanja
      Hello forum,
      I have the problem that I can not use Firefox in combination with WebDriver when using AutoIt on some websites. Of course it does not work with the very website I need it to work with.
      As soon as I want to open the desired website, I get the little robot icon which tells me that the "browser is under remote control" and the website stays blank.
      I CAN open the website (www.ebay-kleinanzeigen.de) but I get blocked when I want to go to my account, to be precise.

      I am using AutoIt 3.3.14.5 I have checked my FireFox version. It is up to date. Also the special browser drivers like gecko etrc. are up to date too and everything works fine with the WebDriver demo.
      It seems that another user also had the same problem, but the thread has already been closed and the users solution (setting security lower did not work for me).
      I mean I can only choose between "standard", "strict" and "customized". On "customized I unchecked everything but it still would not change anything.
      I also have checked Google Chrome and MS Edge. Same result.
      I tried swiching profiles (only with FireFox). Same result.
      I tried to acess a previously opened FireFox session where I manually logged in by using this code snippet:
      _WD_Option('Driver', 'C:\Path\to\the\executable\geckodriver.exe') _WD_Option('DriverParams', '--log trace --connect-existing  --marionette-port 2828') _WD_Option('Port', 4444) Obviously I adjusted the path of the geckodriver.exe but it did not work at all on my computer.
      So far my code is really basically nothing but I can not even start to code. I myself am not a real coder and I know only the very basics like loops, conditions and variables.
      ----------------------------------------
      ; Script Start #include <Array.au3> #include <AutoItConstants.au3> #include <ButtonConstants.au3> #include <EditConstants.au3> #include <File.au3> #include <GuiComboBoxEx.au3> #include <GUIConstantsEx.au3> #include <MsgBoxConstants.au3> #include <StringConstants.au3> #include <StaticConstants.au3> #include "wd_core.au3" #include "wd_helper.au3" #include <WindowsConstants.au3> Local $sDesiredCapabilities, $sSession, $sElement SetupGecko() $_WD_DEBUG = $_WD_DEBUG_None _WD_Startup() $sSession = _WD_CreateSession($sDesiredCapabilities) _WD_Navigate($sSession, "https://www.ebay-kleinanzeigen.de/m-meine-anzeigen.html?sort=CREATION_DATE_ASC&keyword=winter") Exit Func SetupGecko() _WD_Option('Driver', 'geckodriver.exe') _WD_Option('DriverParams', '--log trace --marionette-port 2828') _WD_Option('Port', 4444) $sDesiredCapabilities = '{"capabilities":{"alwaysMatch": {"moz:firefoxOptions": {"args": ["-profile", "' & "C:/Users/myaccount/AppData/Roaming/Mozilla/Firefox/Profiles/0123456.default-release" & '"],"log": {"level": "trace"}}}}}' EndFunc ;==>SetupGecko Func SetupChrome() _WD_Option('Driver', 'chromedriver.exe') _WD_Option('Port', 9515) _WD_Option('DriverParams', '--verbose --log-path="' & @ScriptDir & '\chrome.log"') $sDesiredCapabilities = '{"capabilities": {"alwaysMatch": {"goog:chromeOptions": {"w3c": true, "excludeSwitches": [ "enable-automation"]}}}}' EndFunc ;==>SetupChrome Func SetupEdge() _WD_Option('Driver', 'msedgedriver.exe') _WD_Option('Port', 9515) _WD_Option('DriverParams', '--verbose --log-path="' & @ScriptDir & '\msedge.log"') $sDesiredCapabilities = '{"capabilities": {"alwaysMatch": {"ms:edgeOptions": {"binary": "' & StringReplace(@ProgramFilesDir, "\", "/") & '/Microsoft/Edge/Application/msedge.exe", "excludeSwitches": [ "enable-automation"], "useAutomationExtension": false}}}}' EndFunc ;==>SetupEdge --------------------------------------
      I left the three setup functions in, because I do not care what browser I use as long as I can start coding.
      Also, please understand that I am not trying to be lazy here. I do not want someone to code for me. Maybe the problem is very basic, but I just do not know how to eliminate that restriction.
      Is it something I need to uncheck in the browser settings or is it more complicated? If you need more information, I will be happy to provide those.
      If somebody has an idea or a solution, I would very much appreciate it.

      Edit:
      I am not bothered by the robot icon itself. I do not care about it.  If I try to acess my regular ebay account: "https://mesg.ebay.de/mesgweb/ViewMessages/0" it works like a charm despite the notification that the browser is remotely controlled.
      My problem is, that the first website does not load for some reason ONLY when the browser is remote controlled.
    • By Jemboy
      Recently I was working on a script with icons using GuiCtrkCreatIcon.
      I decided to change the sub folder name of the icons to a more meaning name, however made a typo.

      I tested the .exe on my test computer and it worked flawlessly (because both icon folder where on my test computer) 😁
      But after I installed the script on the intended computers , I got chaos!😵
      Zooming into the problem, I discovered, that because the icons could not be found, the ControlID were returned with a value of 0
      and thus played havoc within the GuiGetMsg() switch/case statement.
      I have been able to reproduce this  (see example)
      #include <GUIConstantsEx.au3> ;============================================================================================================ ; PLEASE, do not save this example in the example folder: C:\Program Files (x86)\AutoIt3\Examples\Helpfile ;============================================================================================================ Example() Func Example() GUICreate(" My GUI Icons", 250, 250) $Icon1 = GUICtrlCreateIcon("shell32.dll", 10, 20, 20) $Icon2 = GUICtrlCreateIcon(@ScriptDir & '\Extras\horse.ani', -1, 20, 40, 32, 32) $Icon3 = GUICtrlCreateIcon("shell32.dll", 7, 20, 75, 32, 32) GUISetState(@SW_SHOW) ;$Icon2 = -1 ; ==> When this line is uncommented the script "works", so -1 could be a potential fix. ; Loop until the user exits. While 1 Switch GUIGetMsg() Case $GUI_EVENT_CLOSE ExitLoop Case $Icon2 Beep (500,500) EndSwitch WEnd GUIDelete() EndFunc ;==>Example If you save the above script outside the Autoit example folder and run it, it will keep beeping because GuiCtrlCreatIcon did not find horse.ani and return $Icon2=0.
      At the moment GUICtrlCreateIcon () only returns the conntrolID on success and 0 on failure.
      I would like to propose a return of -1 on failure, so a existing and working script won't go awry when the icon can not be found.
       
    • By kovlad
      My solution is to write nested arrays without copying.
      The problem was described hier.
       
      Function:
      #include <Array.au3> ; #FUNCTION# ==================================================================================================================== ; Name ..........: _ArrayNestedSet ; Description ...: Assigns a value to an element of a nested 1D array. ; Syntax ........: _ArrayNestedSet(ByRef $aArray, $vIndex, $vValue) ; Parameters ....: $aArray - an array of arrays. ; $vIndex - an index or 1d-array of indexes; ; a size if $vValue not defined (zero to delete). ; $vValue - a value (create, resize or delete if not defined). ; ; Return values .: on success - 1 ; @extended - nesting level of operation ; on failure - 0 ; @extended - nesting level of error ; @error = 1 - invalid array ; @error = 2 - invalid index ; Author ........: ; Modified ......: kovlad ; Remarks .......: ; Related .......: ; Link ..........: https://www.autoitscript.com/forum/topic/185638-assign-a-value-to-an-array-in-array-element/ ; https://www.autoitscript.com/trac/autoit/ticket/3515?replyto=description ; Example .......: Yes ; =============================================================================================================================== Func _ArrayNestedSet(ByRef $aArray, $vIndex, $vValue = Default) Local $extended = @extended + 1 If IsArray($vIndex) Then If UBound($vIndex, 0) <> 1 Then _ Return SetError(2, $extended) If UBound($vIndex) > 1 Then If UBound($aArray, 0) <> 1 Then _ Return SetError(1, $extended) ; keep index for this array Local $i = $vIndex[0] If $i < 0 Or UBound($aArray) <= $i Then _ Return SetError(2, $extended) ; delete index of this array _ArrayDelete($vIndex, 0) ; recursive function call Local $return = _ArrayNestedSet($aArray[$i], $vIndex, $vValue) If @error Then Return SetError(@error, @extended + 1, 0) Else Return SetExtended(@extended + 1, 1) EndIf Else $vIndex = $vIndex[0] EndIf EndIf If $vValue = Default Then If $vIndex < 0 Then _ Return SetError(2, $extended) If $vIndex = 0 Then ; delete array and free memory $aArray = 0 Return SetExtended($extended, 1) EndIf If UBound($aArray, 0) = 1 Then ; resize array keeping data ReDim $aArray[$vIndex] Return SetExtended($extended, 1) Else ; create new nested array Local $aTmp[$vIndex] $aArray = $aTmp Return SetExtended($extended, 1) EndIf Else If UBound($aArray) <= $vIndex Then _ Return SetError(2, $extended + 1) ; set value of array entry $aArray[$vIndex] = $vValue Return SetExtended($extended, 1) EndIf EndFunc  
      Examples:
      ; write value to 1st nested array ConsoleWrite("@@ Debug(" & @ScriptLineNumber & ") : write value to 1st nested array" & @CRLF) Local $aTmp1[4] = [1,2,3,4] _ArrayDisplay($aTmp1, "$aTmp1") Local $aArray[2] = [$aTmp1] ConsoleWrite( _ "_ArrayNestedSet($aArray[0], 3, 14) = " & _ArrayNestedSet($aArray[0], 3, 14) & @CRLF & _ " @error = " & @error & @CRLF & _ " @extended = " & @extended & @CRLF & @CRLF) _ArrayDisplay($aArray[0], "$aArray[0]") ; resize 1st nested array ConsoleWrite("@@ Debug(" & @ScriptLineNumber & ") : resize 1st nested array" & @CRLF) ConsoleWrite( _ "_ArrayNestedSet($aArray[0], 8) = " & _ArrayNestedSet($aArray[0], 8) & @CRLF & _ " @error = " & @error & @CRLF & _ " @extended = " & @extended & @CRLF & @CRLF) _ArrayDisplay($aArray[0], "$aArray[0]") ; write array to 1st nested array ConsoleWrite("@@ Debug(" & @ScriptLineNumber & ") : write array to 1st nested array" & @CRLF) Local $aTmp11[4] = [11,12,13,14] _ArrayDisplay($aTmp11, "$aTmp11") ConsoleWrite( _ "_ArrayNestedSet($aArray[0], 2, $aTmp11) = " & _ArrayNestedSet($aArray[0], 2, $aTmp11) & @CRLF & _ " @error = " & @error & @CRLF & _ " @extended = " & @extended & @CRLF & @CRLF) _ArrayDisplay(($aArray[0])[2], "($aArray[0])[2]") ; write value to 2nd nested array using index array ConsoleWrite("@@ Debug(" & @ScriptLineNumber & ") : write value to 2nd nested array using index array" & @CRLF) Local $aIndex1[2] = [2,3] _ArrayDisplay($aIndex1, "$aIndex1") ConsoleWrite( _ "_ArrayNestedSet($aArray[0], $aIndex1, 140) = " & _ArrayNestedSet($aArray[0], $aIndex1, 140) & @CRLF & _ " @error = " & @error & @CRLF & _ " @extended = " & @extended & @CRLF & @CRLF) _ArrayDisplay(($aArray[0])[2], "($aArray[0])[2]") ; resize 2nd nested array ConsoleWrite("@@ Debug(" & @ScriptLineNumber & ") : resize 2nd nested array" & @CRLF) Local $aIndex1[2] = [2,8] _ArrayDisplay($aIndex1, "$aIndex1") ConsoleWrite( _ "_ArrayNestedSet($aArray[0], $aIndex1) = " & _ArrayNestedSet($aArray[0], $aIndex1) & @CRLF & _ " @error = " & @error & @CRLF & _ " @extended = " & @extended & @CRLF & @CRLF) _ArrayDisplay(($aArray[0])[2], "($aArray[0])[2]") ; create new 3rd nested array ConsoleWrite("@@ Debug(" & @ScriptLineNumber & ") : create new 3rd nested array" & @CRLF) Local $aIndex2[3] = [2,7,6] _ArrayDisplay($aIndex2, "$aIndex2") ConsoleWrite( _ "_ArrayNestedSet($aArray[0], $aIndex2) = " & _ArrayNestedSet($aArray[0], $aIndex2) & @CRLF & _ " @error = " & @error & @CRLF & _ " @extended = " & @extended & @CRLF & @CRLF) _ArrayDisplay((($aArray[0])[2])[7], ")($aArray[0])[2])[7]") ; delete 3rd nested array ConsoleWrite("@@ Debug(" & @ScriptLineNumber & ") : delete 3rd nested array" & @CRLF) Local $aIndex3[3] = [2,7,0] _ArrayDisplay($aIndex3, "$aIndex2") ConsoleWrite( _ "_ArrayNestedSet($aArray[0], $aIndex3) = " & _ArrayNestedSet($aArray[0], $aIndex3) & @CRLF & _ " @error = " & @error & @CRLF & _ " @extended = " & @extended & @CRLF) ConsoleWrite("IsArray((($aArray[0])[2])[7]) = " & IsArray((($aArray[0])[2])[7]) & @CRLF & @CRLF) ; write 0 in 1st nested array to delete the 2nd nested array ConsoleWrite("@@ Debug(" & @ScriptLineNumber & ") : write 0 in 1st nested array to delete the 2nd nested array" & @CRLF) Local $aIndex4[1] = [2] _ArrayDisplay($aIndex4, "$aIndex4") ConsoleWrite( _ "_ArrayNestedSet($aArray[0], $aIndex4, 0) = " & _ArrayNestedSet($aArray[0], $aIndex4, 0) & @CRLF & _ " @error = " & @error & @CRLF & _ " @extended = " & @extended & @CRLF) ConsoleWrite("IsArray(($aArray[0])[2]) = " & IsArray(($aArray[0])[2]) & @CRLF & @CRLF) ; delete 1st nested array (same as '$aArray[0] = 0') ConsoleWrite("@@ Debug(" & @ScriptLineNumber & ") : delete 1st nested array (same as '$aArray[0] = 0')" & @CRLF) Local $aIndex5[1] = [0] _ArrayDisplay($aIndex5, "$aIndex5") ConsoleWrite( _ "_ArrayNestedSet($aArray[0], $aIndex5) = " & _ArrayNestedSet($aArray[0], $aIndex5) & @CRLF & _ " @error = " & @error & @CRLF & _ " @extended = " & @extended & @CRLF) ConsoleWrite("IsArray($aArray[0]) = " & IsArray($aArray[0]) & @CRLF & @CRLF)  
    • By Dave1
      Hello everyone,
      I have several signals on the screen that need to be monitored while a program is running. These signals are scattered around an image which is maximized on 4  equal resolution screens - the AutoIT Window Info does not recognize any objects on the program meaning that I'm left with the PixelSearch() and PixelCheckSum() functions to monitor the signals:
      The signals are as small as a 5x5 pixel area and their coordinates are known.
      I've been digging around for a while now in this forum about the PixelSearch() and PixelCheckSum()  and found some interesting and useful ideas for the use of them. I also came across some other UDF functions like MultiMon(), FastFind(), TtColXY() and the ImageSearch2015 scripts that might be useful for the final output. I don't know if hovering the mouse by using TtColXY() and output its ToolTip() information onto the log file will be faster than using PixelSearch() and/or PixelCheckSum() in a loop for all signals' coordinates.
      The colours of the signals are below:
      red - 0x00FF00 (opaque red)
      green - 0x00FF00 (opaque green)
      yellow - 0xFFFF00 (opaque yellow)
      black - 0x000000 (opaque black, default colour)
      EDIT:
      The desired output is to monitor and record/log the changes and status of each inside a .txt file or a .csv with the below format: 
      Local Machine Time        Signal,      Change,               delta-t
      14:32:07                  Signal1     Green - Yellow         DELTA-t1
      14:34:02                  Signal1     Yellow - Red           DELTA-t1
      14:35:14                  Signal2     Yellow - Red           DELTA-t2
      ...
      Below is the code I came up with. 
      #include <AutoItConstants.au3> #include <MsgBoxConstants.au3> #include <misc.au3> #include <Date.au3> #include <Array.au3> #include <File.au3> #include <ScreenCapture.au3> #include <WinAPI.au3> #include <WinAPIHObj.au3> Global $program_name, $program_open, $Wname, $tCurrent Global $button_xy[2] = [150, 175] Global $iniColour, $ColourCheck, $NewCheck Global $Red, $Green, $Blue, $Nil Global $sFilePath = @ScriptDir & "\Signals_status.txt" Global $SignalID[10] = ["Signal_1", "Signal_2", "Signal_3", "Signal_4", "Signal_5", "Signal_6", "Signal_7", "Signal_8", "Signal_9", "Signal_10"] $program_name = "Signals.exe" $Wname = "Training Task 3" $program_open = ShellExecute($program_name, @ScriptDir) WinWait($Wname) $iniColour = "0x" & Hex(PixelGetColor($button_xy[0], $button_xy[1]), 6) ;~ $iniChecksum = "0x" & Hex(PixelChecksum($button_xy[0], $button_xy[0] - 5, $button_xy[1], $button_xy[1] + 5), 6) $ColourCheck = "0x" & Hex(PixelChecksum($button_xy[0], $button_xy[0] - 5, $button_xy[1], $button_xy[1] + 5, 1, $Wname), 6) ConsoleWrite(_ColourID($iniColour) & " // " & _ColourID($ColourCheck) & @CRLF) ;~ $ColourCheck = "0x " & Hex(PixelGetColor($button_xy[0], $button_xy[1]), 6) $iniColour = $ColourCheck ;$iniChecksum = $currentCheck Do ;~ While 1 _WindowOnTop() _Close_Notepad() $NewCheck = "0x" & Hex(PixelChecksum($button_xy[0], $button_xy[0] - 5, $button_xy[1], $button_xy[1] + 5, 1, $Wname), 6) $tCurrent = _NowCalc() $LogFile = FileOpen($sFilePath, 2) FileWriteLine($LogFile, "Local Machine Time " & "Signal, " & "Change, " & "delta-t") ;~ $ColourCheck = "0x" & Hex(PixelChecksum($button_xy[0], $button_xy[0] - 5, $button_xy[1], $button_xy[1] + 5, 1, $Wname), 6) If $ColourCheck <> $NewCheck Then ;If there's a colour change from the current colour $ColourCheck = $NewCheck Local $tChange, $NewCheckID, $ColourCheckID, $sLogMsg $tChange = _NowCalc() ConsoleWrite("Colour changed!" & @CRLF) $ColourCheckID = _ColourID($ColourCheck) $NewCheckID = _ColourID($NewCheck) $iTimeDiffh = _DateDiff('h', $tChange, $tCurrent) ; time difference in hours $iTimeDiffm = _DateDiff('n', $tChange, $tCurrent) ; time difference in minutes $iTimeDiffs = _DateDiff('s', $tChange, $tCurrent) ; time difference in seconds $durationCheckSum = $iTimeDiffh & ":" & $iTimeDiffm & ":" & $iTimeDiffs ; Timestamp of the signal until PixelCheckSum $sLogMsg = " " & $SignalID[0] & " " & $ColourCheckID & " - " & $NewCheckID & " " & $durationCheckSum _FileWriteLog($LogFile, $sLogMsg) ElseIf $ColourCheck = $NewCheck Then Local $Colour_check = _ColourID("0x" & Hex(PixelChecksum($button_xy[0], $button_xy[0] - 5, $button_xy[1], $button_xy[1] + 5, 1, $Wname), 6)) ConsoleWrite($tCurrent & " " & $Colour_check & @CRLF) EndIf FileClose($sFilePath) Until Not ProcessExists($program_name) And Not WinExists($Wname) _IsProgramOpen() Func _Close_Notepad() $notepad_open = ProcessExists("notepad.exe") ? ProcessClose("notepad.exe") : ProcessClose("notepad.exe") $notepad_open = WinActive("[CLASS:Notepad]") ? WinClose("[CLASS:Notepad]") : ProcessClose("notepad.exe") EndFunc ;==>_Close_Notepad Func _ColourID($sColour) $Red = Int("0x" & StringRegExpReplace($sColour, "(..)(..)(..)(..)", "\2")) $Green = Int("0x" & StringRegExpReplace($sColour, "(..)(..)(..)(..)", "\3")) $Blue = Int("0x" & StringRegExpReplace($sColour, "(..)(..)(..)(..)", "\4")) If $Green > $Blue And $Red > $Blue And $Green >= 0xB0 And $Red >= 0xB0 Then $sCol = "Yellow" ElseIf $Blue > 0xE0 And $Green > 0xE0 And $Red > 0xE0 Then $sCol = "White" ElseIf $Blue > 0x50 And $Blue = $Green And $Blue = $Red Then $sCol = "Grey" ElseIf $Red > $Green And $Red > $Blue And $Red > 0x70 Then $sCol = "Red" ElseIf $Green > $Red And $Green >= $Blue And $Green > 0x70 Then $sCol = "Green" ElseIf $Blue > $Red And $Blue > $Green And $Blue > 0x70 Then $sCol = "Blue" Else $sCol = "Nil" EndIf Return $sCol EndFunc ;==>_ColourID Func _WindowOnTop() WinActivate($Wname) WinSetOnTop($Wname, "", $WINDOWS_ONTOP) Opt("MouseCoordMode", 0) EndFunc ;==>_WindowOnTop Func _IsProgramOpen() If Not ProcessExists($program_name) And Not WinExists($Wname) Then Break(1) EndIf EndFunc ;==>_IsProgramOpen When the program is running, the window opens in the centre of the screen however, the PixelChecksum function is not looking at the correct area. In addition:
      1 - I'm not sure about how to put the message into the log file.
      2 - I tested this script but it is not recording the message into the log file.
      3 - Is there other way to calculate the duration in these lines?
      $iTimeDiffh = _DateDiff('h', $tChange, $tCurrent) ; time difference in hours $iTimeDiffm = _DateDiff('n', $tChange, $tCurrent) ; time difference in minutes $iTimeDiffs = _DateDiff('s', $tChange, $tCurrent) ; time difference in seconds $durationCheckSum = $iTimeDiffh & ":" & $iTimeDiffm & ":" & $iTimeDiffs ; Timestamp of the signal until PixelCheckSum $sLogMsg = " " & $SignalID[0] & " " & $ColourCheckID & " - " & $NewCheckID & " " & $durationCheckSum _FileWriteLog($LogFile, $sLogMsg) Thanks in advance!
×
×
  • Create New...