Jump to content
Sign in to follow this  
waardd

Hotkey stricks!

Recommended Posts

I defined several hotkeys sh+F1 - sh+F9 and Ctrl+F1 but there is a problem with it.

About 4 out of 10 times the Shift or Ctrl seems to stay pressed after executing the hotkey. This is not a HW problem since its on more then 5 keyboard. After i press shift or Ctrl again the key stays so to say up. Who cab help me with this?

In the example $F9 is Exit.

The hotkeys are programmed to function in Putty

Hotkey:

HotKeySet("+{F9}", "_F9")

Fuction:

Func _F9()
$state = WinGetState("[CLASS:PuTTY]", "")
If BitAnd($state, 8) Then
  Send($F9 & "{ENTER}")
EndIf
EndFunc

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Dan_555
      Hi, 
      here is a configurable HotKey Gui script, which i wrote for my current Project:
      #include <Array.au3> #include <ComboConstants.au3> #include <GuiComboBox.au3> #include <GUIConstantsEx.au3> #include <String.au3> #include <WindowsConstants.au3> #include <Array.au3> Global $snip_inifile = @ScriptDir & "\" & "hotkeygui.ini" ;If $HKSTRING is changed, make sure to adjust the $z number in the SetHotkeyKeys function. Local $HKSTRING = "[;][#;Win][!;Alt][+;Shift][^;Ctrl][0;0][1;1][2;2][3;3][4;4][5;5][6;6][7;7][8;8][9;9][a;a][b;b][c;c][d;d][e;e][f;f][g;g][h;h][i;i][j;j][k;k][l;l][m;m][n;n][o;o][p;p][q;q][r;r][s;s][t;t][u;u][v;v][w;w][x;x][y;y][z;z][{PAUSE};Pause][{BREAK};Break][{HOME};Home/Pos1][{END};END][{PGUP};Page UP][{PGDN};Page Down][{F1};F1][{F2};F2][{F3};F3][{F4};F4][{F5};F5][{F6};F6][{F7};F7][{F8};F8][{F9};F9][{F10};F10][{F11};F11][{F12};F12][{SPACE};Space]" Local $HKT = _StringBetween($HKSTRING, "[", "]") Global $HK, $HKS Global $h_HotkeyTestInput Dim $HK[0][2] ;Hotkey keys+names Dim $HKS[6] ;Hotkey (ini)settings 0-3 combo boxes, 4 = Redirect the hotkey test to the input box, 5=Current Hotkey Set. For $x = 0 To UBound($HKT) - 1 ;Make an array including the text from HKSTRING _ArrayAdd($HK, $HKT[$x], 0, ";") Next $HKT = "" $HKSTRING = "" SetHotkeyKeys(0) ;Set the initial hotkey SetHotkeyKeys(1) ;Open the config-gui while 1 ;Test the hotkey. Output is in the console. Exit through traymenue. sleep (10) WEnd Func SetHotkeyKeys($showgui = 0) ;$showgui 0 = Set the saved hotkeys, 1 = Show gui to change the settings Local $a, $b, $c, $z $z=4 ;$z of the text from $HK will go in to c1-c3, the rest goes to c4 $HKS[0] = IniRead($snip_inifile, "hotkey", "0", "4") $HKS[1] = IniRead($snip_inifile, "hotkey", "1", "0") $HKS[2] = IniRead($snip_inifile, "hotkey", "2", "0") $HKS[3] = IniRead($snip_inifile, "hotkey", "3", "12") $HKS[4] = 0 $HKS[5] = $HK[$HKS[0]][0] & $HK[$HKS[1]][0] & $HK[$HKS[2]][0] & $HK[$HKS[3] + $z + 1][0] If $showgui = 1 Then $HKS[4] = 1 #Region ### START Koda GUI section ### Form= $Form1 = GUICreate("Hotkey Config", 317, 79, -1, -1, $WS_POPUP + $WS_CAPTION) $C1 = GUICtrlCreateCombo("", 4, 50, 72, 25, BitOR($CBS_DROPDOWNLIST, $CBS_AUTOHSCROLL)) $C2 = GUICtrlCreateCombo("", 82, 50, 72, 25, BitOR($CBS_DROPDOWNLIST, $CBS_AUTOHSCROLL)) $C3 = GUICtrlCreateCombo("", 161, 50, 72, 25, BitOR($CBS_DROPDOWNLIST, $CBS_AUTOHSCROLL)) $C4 = GUICtrlCreateCombo("", 239, 50, 72, 25, BitOR($CBS_DROPDOWNLIST, $CBS_AUTOHSCROLL)) $Label1 = GUICtrlCreateLabel("Please set a hotkey to use. Note: Not all combos may work.", 4, 30, 300, 17) $Button1 = GUICtrlCreateButton("Set + Save", 4, 4, 70, 23) $h_HotkeyTestInput = GUICtrlCreateInput("Test", 82, 5, 150, 21) $Button2 = GUICtrlCreateButton("Exit", 239, 5, 72, 23) _GUICtrlComboBox_SetMinVisible($C4, 60) GUISetState(@SW_SHOW) #EndRegion ### END Koda GUI section ### For $x = 0 To UBound($HK) - 1 If $x <= $z Then _GUICtrlComboBox_AddString($C1, $HK[$x][1]) _GUICtrlComboBox_AddString($C2, $HK[$x][1]) _GUICtrlComboBox_AddString($C3, $HK[$x][1]) Else _GUICtrlComboBox_AddString($C4, $HK[$x][1]) EndIf Next _GUICtrlComboBox_SetCurSel($C1, $HKS[0]) _GUICtrlComboBox_SetCurSel($C2, $HKS[1]) _GUICtrlComboBox_SetCurSel($C3, $HKS[2]) _GUICtrlComboBox_SetCurSel($C4, $HKS[3]) While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE, $Button2 GUIDelete($Form1) ExitLoop Case $Button1 $HKS[0] = _GUICtrlComboBox_GetCurSel($C1) ;Read the combo - boxes $HKS[1] = _GUICtrlComboBox_GetCurSel($C2) $HKS[2] = _GUICtrlComboBox_GetCurSel($C3) $HKS[3] = _GUICtrlComboBox_GetCurSel($C4) HotKeySet($HKS[5]) ;Clear the Old Hotkey $HKS[5] = $HK[$HKS[0]][0] & $HK[$HKS[1]][0] & $HK[$HKS[2]][0] & $HK[$HKS[3] + $z +1][0] ;Assemble the hotkey string, use $z+1 ! If HotKeySet($HKS[5], "DoHotkey") = 0 Then MsgBox(0, "Hotkey", "Err: Could not set. " & $HKS[5]) ;Set the hotkey or display a message IniWrite($snip_inifile, "hotkey", "0", $HKS[0]) ;Save the hotkey to the ini file IniWrite($snip_inifile, "hotkey", "1", $HKS[1]) IniWrite($snip_inifile, "hotkey", "2", $HKS[2]) IniWrite($snip_inifile, "hotkey", "3", $HKS[3]) EndSwitch WEnd EndIf If $HKS[4] = 0 Then ;Function was called with 0 $HKS[5] = $HK[$HKS[0]][0] & $HK[$HKS[1]][0] & $HK[$HKS[2]][0] & $HK[$HKS[3] + $z + 1][0] If HotKeySet($HKS[5], "DoHotkey") = 0 Then MsgBox(0, "Hotkey", "Err: Could not set. " & $HKS[5]) Else $HKS[4] = 0 EndIf EndFunc ;==>SetHotkeyKeys Func DoHotkey() If $HKS[4] = 0 Then ;Main function ConsoleWrite("PRESS" & @CRLF) Else ;Gui test code: GUICtrlSetData($h_HotkeyTestInput, "Hotkey ! " & @hour & ":" & @min & ":" & @SEC) EndIf EndFunc ;==>DisplayActiveProcess This script uses only 1 hotkey, and saves it  into an ini file.
      To load and use the saved Hotkey from the ini use: SetHotkeyKeys(0) 
      And to open the configuration window, use SetHotkeyKeys(1). 
      Have fun.
    • By Bhooshan
      I need to mute an ongoing call on Microsoft teams without activating the window. Teams allows us to mute using shortcut key Ctrl+Shift+m but only when the window is active.
      # Used set option as ongoing call can be with any person which leads to change in Title Name.
      AutoItSetOption ( "WinTitleMatchMode", 2 ) 
      # I am not clear with the control ID which will be good to use here and also the key combination of ^M       
      ControlSend ( "Microsoft Teams", "", "[CLASS:Intermediate D3D Window; INSTANCE:1]", "{ctrl down}")
       
      Can anyone help...!!! 
       

    • By Blois
      Hi Guis,
       
      I need to create keyboard shortcut to navigate the tabs and activate them, but I could not use the code below:
      #include <TabConstants.au3> #include <WindowsConstants.au3> #include <GuiTab.au3> #include <GUIConstantsEx.au3> HotKeySet("^{TAB}", "_TabRight") HotKeySet("^+{TAB}", "_TabLeft") $gui = GUICreate("test",450, 300) $Tab1 = GUICtrlCreateTab(20, 24, 425, 201) $TabSheet1 = GUICtrlCreateTabItem("Tabsheet 1") $lbContagemGrupos2 = GUICtrlCreateLabel("aaaa", 50, 50) GUICtrlSetColor(-1, 0x0000FF) GUICtrlCreateTabItem("") $TabSheet2 = GUICtrlCreateTabItem(" ") $TabSheet3 = GUICtrlCreateTabItem(" ") GUISetState() While 1 Switch GUIGetMsg() Case $GUI_EVENT_CLOSE ExitLoop EndSwitch WEnd Func _TabRight() $CurPos = _GUICtrlTab_GetCurSel($Tab1) _GUICtrlTab_SetCurSel($Tab1, $CurPos + 1) $tab = "$TabSheet" & $CurPos GUICtrlSetState($TabSheet1 + $CurPos, $GUI_SHOW) Return EndFunc Func _TabLeft() $CurPos = _GUICtrlTab_GetCurSel($Tab1) _GUICtrlTab_SetCurSel($Tab1, $CurPos - 1) $tab = "$TabSheet" & $CurPos GUICtrlSetState($TabSheet1 + $CurPos, $GUI_SHOW) Return EndFunc Exit  
      can you help me?
    • By guner7
      Hi everyone,
      I would like to share a simple snippet where I use for my hotkey script.
      I was searching for a solution whereby pressing a same key, I could have different outcome according to the way the key is being pressed.
      1) Double tap/press fast (like double click the mouse) - outcome A
      2) Long press or HOLD for awhile (2-4 sec) - outcome B
      #Include <Timers.au3> Global $interval_timer, $counter HotKeySet("{F10}", "_terminate") While 1 Sleep(10) WEnd Func _terminate() Local $itv_timer $itv_timer = _Timer_Diff($interval_timer) $interval_timer = _Timer_Init() ;ConsoleWrite($itv_timer & @CRLF) ;to review the timer difference so I can decide the range to capture double tap sequence If $itv_timer > 100 And $itv_timer < 250 Then $counter = 0 $interval_timer = _Timer_Init() MsgBox("","","double tap detected") Elseif $counter >= 25 Then $counter = 0 $interval_timer = _Timer_Init() MsgBox("","","long press detected") ElseIf $itv_timer < 50 Then $counter = $counter + 1 ConsoleWrite($counter & @CRLF) Else $counter = 0 EndIf EndFunc The trick here is to collect and use the frequency of the hotkey is called, and the time difference between each time the hotkey is being called.
      My coding style is not efficient and can be such a mess most of the time, any suggestion or better coding are welcome.
      I hope you find this one helpful.
    • By Xandy
      Screenshot program that can upload/FTP to website/storage with hotkey.
      Features GUI to display programmable keys.

      Set the hotkeys with this function to use, and display hotkeys.
      ; hotkey_set() Parameters: ; ----------------------------------------------------------- ; $aHotkey -                The array hotkeys are stored in. This function sets the values of this array[hotkey_id][$hotkey_data] ; $dHotkey_id -             The enum for this hotkey index ; $sHotkey_description -     The label displayed to the user to represent function of hotkey ; $sHotkey_name -            The hotkey it'self.  Whatever name string you want to give the key ; $dHotkey_key -             The _IsPressed keycode ;    Keycodes AT: https://www.autoitscript.com/autoit3/docs/libfunctions/_IsPressed.htm ; $dHotkey_shift -             Shift flag 0 or 1 Default off ; $dHotkey_ctrl -             Ctrl flag 0 or 1 Default off ; $dHotkey_alt -             Alt flag 0 or 1 Default off Func hotkey_set(ByRef $aHotkey, $dHotkey_id, $sHotkey_description, $sHotkey_name, $dHotkey_key, $dHotkey_shift = 0, $dHotkey_ctrl = 0, $dHotkey_alt = 0)     $aHotkey[$dHotkey_id][$eHotkey_data_key_description] = $sHotkey_description     $aHotkey[$dHotkey_id][$eHotkey_data_key_name] = $sHotkey_name     $aHotkey[$dHotkey_id][$eHotkey_data_key] = $dHotkey_key     $aHotkey[$dHotkey_id][$eHotkey_data_shift] = $dHotkey_shift     $aHotkey[$dHotkey_id][$eHotkey_data_ctrl] = $dHotkey_ctrl     $aHotkey[$dHotkey_id][$eHotkey_data_alt] = $dHotkey_alt EndFunc   ;==>hotkey_set ; You can set your hotkeys here ; Please visit the hotkey_set() function for parameter information hotkey_set($aHotkey, $eHotkey_screenshot_ftp, "Selected Window to FTP", "F12", "7B", 0, 1, 0); F12 hotkey_set($aHotkey, $eHotkey_screenshot_disk, "Selected Window to Disk", "S", "53", 1, 1, 1); S hotkey_set($aHotkey, $eHotkey_clipboard_send, "Send Clipboard keystrokes", "F10", "79", 1, 1, 1); F10  
      Configure settings dialog:

      Screenshot Filename and Screenshot Counter, are used to create simple unique filenames that can cycle. Copy URL to clipboard option. - For linking your screenshots. The screenshot file type is for local copy only. App always uses .JPG for FTP right now, but I could add FTP screenshot file type specification.  
      Any suggestions?  Did I break anything, what did I miss?
      Package uses TTS.au3 by Beege: 
       
      FTP_Screen.zip
      File includes:
         - FTP_Screen.au3
         - FTPScreen.ico
         - TTS.au3 - by Beege
×
×
  • Create New...