Jump to content
Sign in to follow this  
Command3r

ProgressBar with function

Recommended Posts

hi agian :oops:, i need to make True progressbar.. you'll say "True?? How?" xD i'll tell you.

in this script:

#include <ButtonConstants.au3>
#include <GUIConstantsEx.au3>
#include <ProgressConstants.au3>
#include <StaticConstants.au3>
#include <WindowsConstants.au3>
#include <Crypt.au3>
#Region ### START Koda GUI section ### Form=
$Form1 = GUICreate("Form1", 385, 125, -1, -1)
$Progress1 = GUICtrlCreateProgress(32, 32, 294, 17)
$Label1 = GUICtrlCreateLabel("0", 336, 33, 10, 17)
$Button1 = GUICtrlCreateButton("Button1", 160, 80, 75, 25)
GUISetState(@SW_SHOW)
#EndRegion ### END Koda GUI section ###

$source = @ScriptDir & "dd.exe"
$save = @ScriptDir &"dd"

While 1
$nMsg = GUIGetMsg()
Switch $nMsg
Case $GUI_EVENT_CLOSE
Exit
Case $Button1
_Crypt_EncryptFile($source, $save, "123", $CALG_AES_256)
EndSwitch
WEnd

Suppose the file size is "5 MB" so it will take time to encrypt it

i need to make the progressbar loading with encrypting and finish with it too, not like this prog'

for $i = to 100
sleep(10)
guictrlsetdata($progress, $i)

this progress above is not true.. i think now my problem explained :doh:

all helps appreciated.. thanks. :bye:

Edited by Command3r

[font="arial, helvetica, sans-serif;"]Advice for you[/font][font="arial, helvetica, sans-serif;"]: [/font][u]Search[/u] before posting.

 

[font="arial, helvetica, sans-serif;"] *********** Problem solved? if yes [/font][color=rgb(0,0,0);font-family:arial, helvetica, sans-serif;] *********[/color]

[font="arial, helvetica, sans-serif;"]******* press "Mark Solved" button. *******[/font]

Share this post


Link to post
Share on other sites

Share this post


Link to post
Share on other sites

@Yashied,

i add encrypting as a eg, because it takes time.. just that

but i want to know if it possible to make a true progressbar or not? and if yes, how can i do that???


[font="arial, helvetica, sans-serif;"]Advice for you[/font][font="arial, helvetica, sans-serif;"]: [/font][u]Search[/u] before posting.

 

[font="arial, helvetica, sans-serif;"] *********** Problem solved? if yes [/font][color=rgb(0,0,0);font-family:arial, helvetica, sans-serif;] *********[/color]

[font="arial, helvetica, sans-serif;"]******* press "Mark Solved" button. *******[/font]

Share this post


Link to post
Share on other sites

It's possible to program a progress bar that increments or decrements depending upon what the script is doing. It depends on what the script is doing if it's possible to update the progress bar as it's doing it. If you're, for an example, using FileCopy, there's no way to do it, because that function doesn't update you as to how much is being copied or how much has been copied, so there's no way to make an accurate progress bar or update it accurately. If on the other hand, you're using FileCopy to copy 100 files, you can update the progress bar after each individual file has been copied but not during the copy process.

So, to shorten that up, depending upon what you're timing it's either possible to do it, or you'll need to use a workaround to do it.


If I posted any code, assume that code was written using the latest release version unless stated otherwise. Also, if it doesn't work on XP I can't help with that because I don't have access to XP, and I'm not going to.
Give a programmer the correct code and he can do his work for a day. Teach a programmer to debug and he can do his work for a lifetime - by Chirag Gude
How to ask questions the smart way!

I hereby grant any person the right to use any code I post, that I am the original author of, on the autoitscript.com forums, unless I've specifically stated otherwise in the code or the thread post. If you do use my code all I ask, as a courtesy, is to make note of where you got it from.

Back up and restore Windows user files _Array.au3 - Modified array functions that include support for 2D arrays.  -  ColorChooser - An add-on for SciTE that pops up a color dialog so you can select and paste a color code into a script.  -  Customizable Splashscreen GUI w/Progress Bar - Create a custom "splash screen" GUI with a progress bar and custom label.  -  _FileGetProperty - Retrieve the properties of a file  -  SciTE Toolbar - A toolbar demo for use with the SciTE editor  -  GUIRegisterMsg demo - Demo script to show how to use the Windows messages to interact with controls and your GUI.  -   Latin Square password generator

Share this post


Link to post
Share on other sites

It's possible to program a progress bar that increments or decrements depending upon what the script is doing. It depends on what the script is doing if it's possible to update the progress bar as it's doing it. If you're, for an example, using FileCopy, there's no way to do it, because that function doesn't update you as to how much is being copied or how much has been copied, so there's no way to make an accurate progress bar or update it accurately. If on the other hand, you're using FileCopy to copy 100 files, you can update the progress bar after each individual file has been copied but not during the copy process.

So, to shorten that up, depending upon what you're timing it's either possible to do it, or you'll need to use a workaround to do it.

you can update the progress bar after each individual file has been copied but not during the copy process.

okay :oops:, nice idea :doh:

but what about using that in encrypting??

do i need to get the original file size, and the file is encrypting?? then compare???

any script please?

ty :bye:


[font="arial, helvetica, sans-serif;"]Advice for you[/font][font="arial, helvetica, sans-serif;"]: [/font][u]Search[/u] before posting.

 

[font="arial, helvetica, sans-serif;"] *********** Problem solved? if yes [/font][color=rgb(0,0,0);font-family:arial, helvetica, sans-serif;] *********[/color]

[font="arial, helvetica, sans-serif;"]******* press "Mark Solved" button. *******[/font]

Share this post


Link to post
Share on other sites

any ideas?


[font="arial, helvetica, sans-serif;"]Advice for you[/font][font="arial, helvetica, sans-serif;"]: [/font][u]Search[/u] before posting.

 

[font="arial, helvetica, sans-serif;"] *********** Problem solved? if yes [/font][color=rgb(0,0,0);font-family:arial, helvetica, sans-serif;] *********[/color]

[font="arial, helvetica, sans-serif;"]******* press "Mark Solved" button. *******[/font]

Share this post


Link to post
Share on other sites

I'd use GUICtrlCreateProgress and use the $PBS_MARQUEE style to create a scrolling progress bar for anything that you can't get direct information from, such as the encrypt routines or filecopy. This way the user knows something is going on in the background. For an example of an easy way to do it, there's a link in m signature to a UDF that can be used to create a GUI with a label and progress bar.


If I posted any code, assume that code was written using the latest release version unless stated otherwise. Also, if it doesn't work on XP I can't help with that because I don't have access to XP, and I'm not going to.
Give a programmer the correct code and he can do his work for a day. Teach a programmer to debug and he can do his work for a lifetime - by Chirag Gude
How to ask questions the smart way!

I hereby grant any person the right to use any code I post, that I am the original author of, on the autoitscript.com forums, unless I've specifically stated otherwise in the code or the thread post. If you do use my code all I ask, as a courtesy, is to make note of where you got it from.

Back up and restore Windows user files _Array.au3 - Modified array functions that include support for 2D arrays.  -  ColorChooser - An add-on for SciTE that pops up a color dialog so you can select and paste a color code into a script.  -  Customizable Splashscreen GUI w/Progress Bar - Create a custom "splash screen" GUI with a progress bar and custom label.  -  _FileGetProperty - Retrieve the properties of a file  -  SciTE Toolbar - A toolbar demo for use with the SciTE editor  -  GUIRegisterMsg demo - Demo script to show how to use the Windows messages to interact with controls and your GUI.  -   Latin Square password generator

Share this post


Link to post
Share on other sites

i like the 2nd progress :oops: im gonna try it and tell you.

thanks. :bye:


[font="arial, helvetica, sans-serif;"]Advice for you[/font][font="arial, helvetica, sans-serif;"]: [/font][u]Search[/u] before posting.

 

[font="arial, helvetica, sans-serif;"] *********** Problem solved? if yes [/font][color=rgb(0,0,0);font-family:arial, helvetica, sans-serif;] *********[/color]

[font="arial, helvetica, sans-serif;"]******* press "Mark Solved" button. *******[/font]

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Dan_555
      Hi, here are few functions for the ListBox.
      I have searched the forum, but most of the functions are for listview, so i took one example code from melba23 (clear selection) and
      wrote few more functions. (Because my current project needs them).
       
      These functions work only on a Multi-selection ListBox .
      The functions do: Clear Selection, Delete Selected items, Invert Selection, Move selected items up and down.
       The example code has 2 Listboxes. The selected items on the left ListBox can be moved up and down. The right Listbox has buttons for the other functions.
      #include <GUIConstantsEx.au3> #include <GuiListBox.au3> #include <WindowsConstants.au3> Global $hForm1 = GUICreate("Listbox test", 349, 287) $LB_1 = GUICtrlCreateList("", 6, 40, 157, 244, BitOR($LBS_NOTIFY, $LBS_MULTIPLESEL, $WS_HSCROLL, $WS_VSCROLL, $LBS_DISABLENOSCROLL)) $LB_2 = GUICtrlCreateList("", 179, 40, 157, 244, BitOR($LBS_NOTIFY, $LBS_MULTIPLESEL , $WS_HSCROLL, $WS_VSCROLL, $LBS_DISABLENOSCROLL)) $BL_1 = GUICtrlCreateButton("Up", 20, 3, 35, 18) $BL_2 = GUICtrlCreateButton("Down", 60, 3, 35, 18) $BR_1 = GUICtrlCreateButton("Up", 200, 3, 35, 18) $BR_2 = GUICtrlCreateButton("Down", 240, 3, 35, 18) $BR_3 = GUICtrlCreateButton("Reverse Sel", 272, 22, 68, 17) $BR_4 = GUICtrlCreateButton("Clear Sel", 217, 22, 52, 17) $BR_5 = GUICtrlCreateButton("Delete", 175, 22, 40, 17) $BR_6 = GUICtrlCreateButton("Populate", 290, 3, 50, 18) GUISetState(@SW_SHOW) For $x = 0 To 50 If $x <= 10 Then GUICtrlSetData($LB_1, $x & " test", 0) GUICtrlSetData($LB_2, $x & " Test", 0) Next While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE Exit Case $BL_1 $a = Listbox_ItemMoveUD($LB_1, -1) If $a > -1 Then WinSetTitle($hForm1, "", "Moved items: " & $a) Case $BL_2 $a = Listbox_ItemMoveUD($LB_1, 1) If $a > -1 Then WinSetTitle($hForm1, "", "Moved items: " & $a) Case $BR_1 Listbox_ItemMoveUD($LB_2, -1) Case $BR_2 Listbox_ItemMoveUD($LB_2, 1) Case $BR_3 Listbox_ReverseSelection($LB_2) Case $BR_4 Listbox_ClearSelection($LB_2) Case $BR_5 Listbox_DeleteSelectedItems($LB_2) Case $br_6 ;Populate GUICtrlSetData($LB_2, "") ; Clears the listbox For $x = 0 To 50 GUICtrlSetData($LB_2, $x & " Test", 0) Next EndSwitch WEnd ;note $hLB_ID - is the Listbox id Func Listbox_DeleteSelectedItems($hLB_ID) local $aSel = _GUICtrlListBox_GetSelItems($hLB_ID) Local $i For $i = $aSel[0] To 1 Step -1 _GUICtrlListBox_DeleteString($hLB_ID, $aSel[$i]) Next EndFunc ;==>Listbox_DeleteSelectedItems Func Listbox_ClearSelection($hLB_ID) Local $aSel = _GUICtrlListBox_GetSelItems($hLB_ID) ;Code from Melba23 - Autoit Forum For $i = 1 To $aSel[0] _GUICtrlListBox_SetSel($hLB_ID, $aSel[$i], False) Next EndFunc ;==>Listbox_ClearSelection Func Listbox_ReverseSelection($hLB_ID) Local $i Local $aCou = _GUICtrlListBox_GetCount($hLB_ID) Local $cSel = _GUICtrlListBox_GetCaretIndex($hLB_ID) ;Save the caret For $i = 0 To $aCou _GUICtrlListBox_SetSel($hLB_ID, $i, Not (_GUICtrlListBox_GetSel($hLB_ID, $i))) Next _GUICtrlListBox_SetCaretIndex($hLB_ID, $cSel) ;Restore the caret EndFunc ;==>Listbox_ReverseSelection Func Listbox_ItemMoveUD($hLB_ID, $iDir = -1) ;Listbox_ItemMoveUD - Up/Down - Works only on multiple selection listbox ($LBS_MULTIPLESEL) ;$iDir: -1 up, 1 down ;Return values -1 nothing to do, 0 nothing moved, >0 performed moves Local $iCur, $iNxt, $aCou, $aSel, $i, $m = 0 ;Current, next, Count, Selection, loop , movecount $aSel = _GUICtrlListBox_GetSelItems($hLB_ID) ;Put selected items in an array $aCou = _GUICtrlListBox_GetCount($hLB_ID) ;Get total item count of the listbox WinSetTitle ($hForm1,"",$aSel[0]) Select Case $iDir = -1 ;Move Up For $i = 1 To $aSel[0] If $aSel[$i] > 0 Then $iNxt = _GUICtrlListBox_GetText($hLB_ID, $aSel[$i] - 1) ;Save the selection index - 1 text _GUICtrlListBox_ReplaceString($hLB_ID, $aSel[$i] - 1, _GUICtrlListBox_GetText($hLB_ID, $aSel[$i])) ;Replace the index-1 text with the index text _GUICtrlListBox_ReplaceString($hLB_ID, $aSel[$i], $iNxt) ;Replace the selection with the saved var $m = $m + 1 EndIf Next For $i = 1 To $aSel[0] ;Restore the selections after moving If $aSel[$i] > 0 Then _GUICtrlListBox_SetSel($hLB_ID, $aSel[$i] - 1, 1) EndIf Next Return $m Case $iDir = 1 ;Move Down If $aSel[0] > 0 Then For $i = $aSel[0] To 1 Step -1 If $aSel[$i] < $aCou - 1 Then $iNxt = _GUICtrlListBox_GetText($hLB_ID, $aSel[$i] + 1) _GUICtrlListBox_ReplaceString($hLB_ID, $aSel[$i] + 1, _GUICtrlListBox_GetText($hLB_ID, $aSel[$i])) _GUICtrlListBox_ReplaceString($hLB_ID, $aSel[$i], $iNxt) $m = $m + 1 EndIf Next EndIf For $i = $aSel[0] To 1 Step -1 ;Restore the selections after moving If $aSel[$i] < $aCou - 1 Then _GUICtrlListBox_SetSel($hLB_ID, $aSel[$i] + 1, 1) EndIf Next Return $m EndSelect Return -1 EndFunc ;==>Listbox_ItemMoveUD  
    • By PeterVerbeek
      This topic give you access to an AutoIt functions library I maintain which is called PAL, Peter's AutoIt Library. The latest version 1.20 contains 197 functions divided into these topics:
      window, desktop and monitor mouse and GUI GUI controls including graphical buttons (jpg, png) logics and mathematics include constants string, xml string and file string dialogues and progress bars data lists: lists, stacks, shift registers and key maps (a.ka. dictionaries) miscellaneous: logging/debugging, process and system info Change log and files section  on the PAL website (SourceForge).
      A lot of these functions were created in the development of Peace, Peter's Equalizer APO Configuration Extension, which is a user interface for the system-wide audio driver called Equalizer APO.
    • By Rabu
      I want to use the winsock overlapped/completion routine method of i/o, but how do I get the pointer to my user function.  I know it is possible because when using the old method of windows messages, the user function name was used instead of a pointer.
    • By Skeletor
      Hi All,
      I want to make my progress bar progress with the amount of File lines read. 
      How would I do this correctly. So far the code below can sometimes run in the middle of the progress bar and state completed.. and other times it can run into the 200%. 
       
      ;======================================================================== ProgressOn("TITLE", "ACTION") ;======================================================================== For $count = 1 To _FileCountLines($FileRead) Step 1 $string = FileReadLine($FileRead, $count) $value1 = $input[1] $value2 = $input[2] $value3 = $input[3] $value4 = $input[4] $TM = FileWrite("C:\temp\test.txt", $value1 & " " & $value2 & " " & $value3 & " " & $value4 & @CRLF) ProgressSet($count, $count & "%") Next ;======================================================================== ; PROGRESS BAR OFF ;======================================================================== ProgressSet(_FileCountLines($FileRead), "Completed!") Sleep(750) ProgressOff() ;========================================================================  
×
×
  • Create New...