ajit Posted May 11, 2012 Share Posted May 11, 2012 Hi, I am trying to use this script (Guisetaccelerators) from helpfile (slightly modified). After one use i want to unset all accelerators. The helpfile says "Passing this function a non-array will unset all accelerators for the given winhandle". What does this mean and how do I achieve it. After one use it should not work. Regards Ajit ; A simple custom messagebox that uses the MessageLoop mode #include <GUIConstantsEx.au3> GUICreate("Custom Msgbox", 210, 80) GUICtrlCreateLabel("Please click a button!", 10, 10) $YesID = GUICtrlCreateButton("Yes", 10, 50, 50, 20) $NoID = GUICtrlCreateButton("No", 80, 50, 50, 20) $ExitID = GUICtrlCreateButton("Exit", 150, 50, 50, 20) ; Set accelerators for Ctrl+y and Ctrl+n Dim $AccelKeys[2][2]=[["^y", $YesID], ["^n", $NoID]] GUISetAccelerators($AccelKeys) GUISetState() ; display the GUI Do $msg = GUIGetMsg() Select Case $msg = $YesID ConsoleWrite(@CRLF & "pressed Ctrl Y ") Case $msg = $NoID ConsoleWrite(@CRLF & "pressed Ctrl N ") Case $msg = $ExitID MsgBox(0, "You clicked on", "Exit") Case $msg = $GUI_EVENT_CLOSE MsgBox(0, "You clicked on", "Close") EndSelect Until $msg = $GUI_EVENT_CLOSE Or $msg = $ExitID Link to comment Share on other sites More sharing options...
Moderators Melba23 Posted May 11, 2012 Moderators Share Posted May 11, 2012 ajit, Just do as the Help file suggests: ; A simple custom messagebox that uses the MessageLoop mode #include <GUIConstantsEx.au3> GUICreate("Custom Msgbox", 210, 80) GUICtrlCreateLabel("Please click a button!", 10, 10) $YesID = GUICtrlCreateButton("Yes", 10, 50, 50, 20) $NoID = GUICtrlCreateButton("No", 80, 50, 50, 20) $ExitID = GUICtrlCreateButton("Exit", 150, 50, 50, 20) ; Set accelerators for Ctrl+y and Ctrl+n Dim $AccelKeys[2][2] = [["^y", $YesID],["^n", $NoID]] GUISetAccelerators($AccelKeys) GUISetState() ; display the GUI Do $msg = GUIGetMsg() Select Case $msg = $YesID ConsoleWrite(@CRLF & "pressed Ctrl Y ") GUISetAccelerators("") ; Remove acclerators <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< Case $msg = $NoID ConsoleWrite(@CRLF & "pressed Ctrl N ") GUISetAccelerators("") ; Remove acclerators <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< Case $msg = $ExitID MsgBox(0, "You clicked on", "Exit") Case $msg = $GUI_EVENT_CLOSE MsgBox(0, "You clicked on", "Close") EndSelect Until $msg = $GUI_EVENT_CLOSE Or $msg = $ExitID All clear? M23 Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind Open spoiler to see my UDFs: Spoiler ArrayMultiColSort ---- Sort arrays on multiple columnsChooseFileFolder ---- Single and multiple selections from specified path treeview listingDate_Time_Convert -- Easily convert date/time formats, including the language usedExtMsgBox --------- A highly customisable replacement for MsgBoxGUIExtender -------- Extend and retract multiple sections within a GUIGUIFrame ---------- Subdivide GUIs into many adjustable framesGUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView itemsGUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeViewMarquee ----------- Scrolling tickertape GUIsNoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxesNotify ------------- Small notifications on the edge of the displayScrollbars ----------Automatically sized scrollbars with a single commandStringSize ---------- Automatically size controls to fit textToast -------------- Small GUIs which pop out of the notification area Link to comment Share on other sites More sharing options...
ajit Posted May 11, 2012 Author Share Posted May 11, 2012 @Melba23 Thanks a lot for the quick reply. Worked fine. Regards Ajit Link to comment Share on other sites More sharing options...
ajit Posted May 11, 2012 Author Share Posted May 11, 2012 @Melba, Another question. Can i use GUISetAccelerators to activate a function() in a script (like in a hotkeyset)? If yes, can you help me? Regards Ajit Link to comment Share on other sites More sharing options...
Moderators Melba23 Posted May 11, 2012 Moderators Share Posted May 11, 2012 ajit, Easy - use a dummy control like this: expandcollapse popup; A simple custom messagebox that uses the MessageLoop mode #include <GUIConstantsEx.au3> GUICreate("Custom Msgbox", 210, 80) GUICtrlCreateLabel("Please click a button!", 10, 10) $YesID = GUICtrlCreateButton("Yes", 10, 50, 50, 20) $NoID = GUICtrlCreateButton("No", 80, 50, 50, 20) $ExitID = GUICtrlCreateButton("Exit", 150, 50, 50, 20) $cDummy = GUICtrlCreateDummy() ; Create a dummy control ; Set accelerators for Ctrl+y and Ctrl+n and ctrl+f <<<<<<<<<<<<<<<<<<<<< Dim $AccelKeys[3][2] = [["^y", $YesID],["^n", $NoID], ["^f", $cDummy]] ; <<<<<<<<<<<<<<<<<<<<<< GUISetAccelerators($AccelKeys) GUISetState() ; display the GUI Do $msg = GUIGetMsg() Select Case $msg = $YesID ConsoleWrite(@CRLF & "pressed Ctrl Y ") GUISetAccelerators("") ; Remove acclerators <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< Case $msg = $NoID ConsoleWrite(@CRLF & "pressed Ctrl N ") GUISetAccelerators("") ; Remove acclerators <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< Case $msg = $ExitID MsgBox(0, "You clicked on", "Exit") Case $msg = $GUI_EVENT_CLOSE MsgBox(0, "You clicked on", "Close") Case $msg = $cDummy ; Run function when dummy action by accel key <<<<<<<<<<<<<<<<<<<<<<<<<<<<<< Function() EndSelect Until $msg = $GUI_EVENT_CLOSE Or $msg = $ExitID Func Function() ; Function to run <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< MsgBox(0, "Hi", "I am run from within a function") EndFunc Good enough? M23 Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind Open spoiler to see my UDFs: Spoiler ArrayMultiColSort ---- Sort arrays on multiple columnsChooseFileFolder ---- Single and multiple selections from specified path treeview listingDate_Time_Convert -- Easily convert date/time formats, including the language usedExtMsgBox --------- A highly customisable replacement for MsgBoxGUIExtender -------- Extend and retract multiple sections within a GUIGUIFrame ---------- Subdivide GUIs into many adjustable framesGUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView itemsGUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeViewMarquee ----------- Scrolling tickertape GUIsNoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxesNotify ------------- Small notifications on the edge of the displayScrollbars ----------Automatically sized scrollbars with a single commandStringSize ---------- Automatically size controls to fit textToast -------------- Small GUIs which pop out of the notification area Link to comment Share on other sites More sharing options...
ajit Posted May 11, 2012 Author Share Posted May 11, 2012 @Melba That worked fine. Thanks for always being so helpful. Regards Ajit Link to comment Share on other sites More sharing options...
Moderators Melba23 Posted May 11, 2012 Moderators Share Posted May 11, 2012 ajit, Always a pleasure. M23 Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind Open spoiler to see my UDFs: Spoiler ArrayMultiColSort ---- Sort arrays on multiple columnsChooseFileFolder ---- Single and multiple selections from specified path treeview listingDate_Time_Convert -- Easily convert date/time formats, including the language usedExtMsgBox --------- A highly customisable replacement for MsgBoxGUIExtender -------- Extend and retract multiple sections within a GUIGUIFrame ---------- Subdivide GUIs into many adjustable framesGUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView itemsGUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeViewMarquee ----------- Scrolling tickertape GUIsNoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxesNotify ------------- Small notifications on the edge of the displayScrollbars ----------Automatically sized scrollbars with a single commandStringSize ---------- Automatically size controls to fit textToast -------------- Small GUIs which pop out of the notification area Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now