Jump to content
Sign in to follow this  
jaberwacky

MouseHoverCallTips [09/25/2014]

Recommended Posts

Now hold on for one minute. I changed ext.lua.reset to zero in my sciteuser.properties and now this script doesn't work at all. Have yall just been stringing me along for a ride?

Share this post


Link to post
Share on other sites

Alright, I updated to the latest version. I should note that if you have 'ext.lua.reset' set to one in the 'SciTEUser.Properties' then this won't work correctly, but that should not concern most of you. However, if you're having issues then check that setting first.

Bugs: squashed.

Inefficiencies: eliminated.

Edited by LaCastiglione

Share this post


Link to post
Share on other sites
Posted Image

"Straight_and_Crooked_Thinking" : A "classic guide to ferreting out untruths, half-truths, and other distortions of facts in political and social discussions."
"The Secrets of Quantum Physics" : New and excellent 2 part documentary on Quantum Physics by Jim Al-Khalili. (Dec 2014)

"Believing what you know ain't so" ...

Knock Knock ...
 

Share this post


Link to post
Share on other sites

OK, I fixed the bugs I introduced in my latest bug fixes! Should definitely work now. Please let me know if it doesn't work. I also want to know if it does! Don't leave me hangin'.

Share this post


Link to post
Share on other sites

Just reporting/dumping some minor exception I run into.

Seems "editor:GetLine(i)" in line:255 can return 'nil' in some cases.

Which in turn triggers a (temporary) error message at line:257

- did not find the main scite/text reason that triggered this.

Error message:

...AutoIt3SciTELuaCallTipsOnMouseHover.lua:257: bad argument #1 to 'gsub' (string expected, got nil)

//code from CallTipsOnMouseHover.lua
if filepath == props["FilePath"] then
for i = 0 , editor.LineCount - 1 do
local line = editor:GetLine(i) //line:255

line = string.gsub(line, 'n', '') //line:257

if string.find(string.lower(line), funcdef_reg_exp) and line ~= nil then
function_definition = get_function_definition(line, word)
break
end
end
else

Oops, forum editor eat the code indentation ... again. >_<

[striked: using wrong/old version]

Edited by MvGulik

"Straight_and_Crooked_Thinking" : A "classic guide to ferreting out untruths, half-truths, and other distortions of facts in political and social discussions."
"The Secrets of Quantum Physics" : New and excellent 2 part documentary on Quantum Physics by Jim Al-Khalili. (Dec 2014)

"Believing what you know ain't so" ...

Knock Knock ...
 

Share this post


Link to post
Share on other sites

Checking. Nope. (Updated local version)

Considering it fixed.

Edited by MvGulik

"Straight_and_Crooked_Thinking" : A "classic guide to ferreting out untruths, half-truths, and other distortions of facts in political and social discussions."
"The Secrets of Quantum Physics" : New and excellent 2 part documentary on Quantum Physics by Jim Al-Khalili. (Dec 2014)

"Believing what you know ain't so" ...

Knock Knock ...
 

Share this post


Link to post
Share on other sites

OK, I found another bug I introduced and then fixed it. Again. *Sigh* I think I will leave this script alone for a good while.

EDIT: Fixed it again. =P

Edited by LaCastiglione

Share this post


Link to post
Share on other sites

I think I will leave this script alone for a good while.

I know the feeling. :)

I will hold off on minor stuff. (if I find any that is. ;) )


"Straight_and_Crooked_Thinking" : A "classic guide to ferreting out untruths, half-truths, and other distortions of facts in political and social discussions."
"The Secrets of Quantum Physics" : New and excellent 2 part documentary on Quantum Physics by Jim Al-Khalili. (Dec 2014)

"Believing what you know ain't so" ...

Knock Knock ...
 

Share this post


Link to post
Share on other sites

Aha.

When typing #include ' and/or #include '' ( ' | " | <>). It seems its assumed there is some include data/string available to be pass on after the RE part. Which is not always the case.

function MouseHoverCallTips:get_include_from_line(line)
...

local include = string.match(line, "[<"']%s*.+.au3%s*['">]")
-- can return nil in some cases.

if include == nil then return '' end
-- fast error fix/blocker. Works so far. But might not be the right solution.
-- (As I'm not sure about intended/expected RE output.)

return string.sub(include, 2, -2)
-- error triggered if 'include' is nil.

...
end

[spelling ... + bye bye code indentation. Getting/Is really silly for a code forum ...]

Edited by MvGulik

"Straight_and_Crooked_Thinking" : A "classic guide to ferreting out untruths, half-truths, and other distortions of facts in political and social discussions."
"The Secrets of Quantum Physics" : New and excellent 2 part documentary on Quantum Physics by Jim Al-Khalili. (Dec 2014)

"Believing what you know ain't so" ...

Knock Knock ...
 

Share this post


Link to post
Share on other sites

Ok, after having taken a deeper look, I think this character sequence: ".+" found in the pattern: "[<"']%s*.+.au3%s*['">]" accounts for one or more characters. I may be mistaken.

Edited by jaberwocky6669

Share this post


Link to post
Share on other sites

Nope, your not mistaken about that. www.wowpedia.org - Lua Pattern_matching

Lua RE Problems?


"Straight_and_Crooked_Thinking" : A "classic guide to ferreting out untruths, half-truths, and other distortions of facts in political and social discussions."
"The Secrets of Quantum Physics" : New and excellent 2 part documentary on Quantum Physics by Jim Al-Khalili. (Dec 2014)

"Believing what you know ain't so" ...

Knock Knock ...
 

Share this post


Link to post
Share on other sites

What problem(s) were you experiencing?

None ... that I'm aware of (last updated version worked ok for me). Though(+t) you might have some RE issue's because you ware not sure about the ".+" part.

[missing t]

Edited by MvGulik

"Straight_and_Crooked_Thinking" : A "classic guide to ferreting out untruths, half-truths, and other distortions of facts in political and social discussions."
"The Secrets of Quantum Physics" : New and excellent 2 part documentary on Quantum Physics by Jim Al-Khalili. (Dec 2014)

"Believing what you know ain't so" ...

Knock Knock ...
 

Share this post


Link to post
Share on other sites

Thank you, great improvement when dev. complex stuff. Interesting how AutoIt is starting to have a potentially more mature development platform than what I am using for mainstream language development such as JS and PHP (that's not counting the full blown IDEs (which I dislike for their non-transparency anyway)).

Also, a question, is it possible to do line breaks in Function comment/description? So as to emulate the format used by for example _ArrayDisplay and others

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By BugFix
      The block comment (internal: box comment) in SciTE cannot be toggled.
      I have now created a script that helps. It works with any file type for which the corresponding entries in the properties are created.For toggeling its required to detect, what the user want to do.
      Rules for detection:     - selection starts in an empty line (line break only)         following line begins with comment.box.start ==> action: uncomment         otherwise                                    ==> action: comment     - selection starts in line with text         line begins with comment.box.start           ==> action: uncomment         otherwise                                    ==> action: comment     - selection ends in an empty line AND       the line before begins with comment.box.end    ==> action: both lines are part of comment block, will deleted     - selection ends in line with comment.box.end    ==> action: line will deleted     - At least two lines must be selected, otherwise an error message is output to the console. This means that in nested block comments there is at least one more line between two comment.box.start markers.
      It is recommended to write all block comment settings into "SciTEUser.properties". The setting "comment.box.end.au3" from "SciTEGlobal.properties" is incorrect and must be corrected.
      comment.box.start.au3=#cs #~ If TAB should used as box.middle, define an alternation (e.g. "@Tab"),  #~ "\t" will not recognised as tab if passed as propertie. comment.box.tab.alternation= #~ If you want characters or tab in each line of comment block, define it here. #~ To use TAB, set the alternation variable here: $(comment.box.tab.alternation) comment.box.middle.au3= comment.box.end.au3=#ce Connection to SciTE
      Search a free command number. Use a Hotkey of your choice.
      If you have declared an option for user lua scripts (e.g.: "Lua.User.Scripts.Path=C:\code\lua"), copy the script to this folder.
      Otherwise copy it to a folder of your choice and change the path in the command: "dofile". But backslashes in the path must be masked. ("\\").
      If your path has spaces don't forgot to encapsulate in string delimiters.
      # 24 Toggle Block Comment command.name.24.*=Toggle Block Comment command.24.*=dofile $(Lua.User.Scripts.Path)/BlockComment.lua command.mode.24.*=subsystem:lua,savebefore:no command.shortcut.24.*=Ctrl+Alt+F10  
      Here the lua script:
      -- TIME_STAMP 2020-10-04 18:56:11 v 0.5 --[[ Toggle Block Comments ©BugFix ( autoit[at]bug-fix.info ) For toggeling its required to detect, what the user want to do. Rules for detection: - selection starts in an empty line (line break only) following line begins with comment.box.start ==> action: uncomment otherwise ==> action: comment - selection starts in line with text line begins with comment.box.start ==> action: uncomment otherwise ==> action: comment - selection ends in an empty line AND the line before begins with comment.box.end ==> action: both lines are part of comment block, will deleted - selection ends in line with comment.box.end ==> action: line will deleted - At least two lines must be selected, otherwise an error message is output to the console. Properties: It is recommended to write all block comment settings into SciTEUser.properties. The setting "comment.box.end.au3" from "SciTEGlobal.properties" is incorrect and must be corrected. comment.box.start.au3=#cs #~ If TAB should used as box.middle, define an alternation (e.g. "@Tab"), #~ "\t" will not recognised as tab if passed as propertie. comment.box.tab.alternation= #~ If you want characters or tab in each line of comment block, define it here. #~ To use TAB, set the alternation variable here: $(comment.box.tab.alternation) comment.box.middle.au3= comment.box.end.au3=#ce ]] local BlockComment = { -- variables ext, -- file extension boxStart, -- property: comment.box.start boxMiddle, -- property: comment.box.middle boxEnd, -- property: comment.box.end bMiddle, -- bool: boxMiddle is defined selStart, -- selection start position selEnd, -- selection end position lineStart, -- selection start line number lineEnd, -- selection end line number newText, -- the text that replaces the selection Init = function(self) self.ext = props["FileExt"] self.boxStart = props["comment.box.start."..self.ext] self.boxMiddle = props["comment.box.middle."..self.ext] local tabAlternation = props["comment.box.tab.alternation"] if tabAlternation ~= "" and self.boxMiddle == tabAlternation then self.boxMiddle = "\t" end self.boxEnd = props["comment.box.end."..self.ext] self.bMiddle = not (self.boxMiddle == "") self.selStart = editor.SelectionStart self.selEnd = editor.SelectionEnd self.lineStart = editor:LineFromPosition(self.selStart) self.lineEnd = editor:LineFromPosition(self.selEnd) self.newText = "" end, -- create the line w/wo middle markers NewLine = function(self, _num, _uncmt) local line = editor:GetLine(_num) if _uncmt then -- if second last line has box.end AND last line is empty OR if (_num == self.lineEnd -1 and self:LineIsEnd(_num) and self:LineIsEmpty(_num +1)) or -- if is the last line AND its empty --> stop proceeding (_num == self.lineEnd and self:LineIsEmpty(_num)) then return "" else -- if box.middle exists --> remove it if self.bMiddle then line = line:sub(self.boxMiddle:len()+1) end end else -- add box.middle if exists line = self.boxMiddle..line end return line end, -- checks if line is empty (has only a line break) LineIsEmpty = function(self, _lineNum) return (editor:GetLine(_lineNum) == "\r\n") end, -- checks if line has box.start LineIsStart = function(self, _lineNum) local line = editor:GetLine(_lineNum) return ( line:sub(1, self.boxStart:len()):lower() == self.boxStart:lower() ) end, -- checks if line has box.end LineIsEnd = function(self, _lineNum) local line = editor:GetLine(_lineNum) return ( line:sub(1, self.boxEnd:len()):lower() == self.boxEnd:lower() ) end, -- returns "false" if none error ErrorCheck = function(self) if self.selStart == self.selEnd then print("! NONE SELECTION.") return true elseif self.boxStart == "" or self.boxEnd == "" then print("! ERROR - The comment.box properties for *."..self.ext.." files are missing or incomplete.") return true elseif self.lineStart == self.lineEnd then print("! SINGLE LINE SELECTION. USE LINE COMMENT INSTEAD.") return true else return false end end, -- creates the text to toggle and replace the selection with it Toggle = function(self) self:Init() if self:ErrorCheck() then return end local uncomment = false local skip = 0 -- proceed with first line -- if start position is in empty line AND next line has box.start --> uncomment the block if self:LineIsEmpty(self.lineStart) and self:LineIsStart(self.lineStart +1) then uncomment = true skip = 1 -- the following line will ignored now -- if line from start position has box.start --> uncomment the block elseif self:LineIsStart(self.lineStart) then uncomment = true -- in other cases comment the block else -- insert box.start before the first line; if box.middle exists --> insert it too self.newText = self.boxStart.."\n"..self.boxMiddle..editor:GetLine(self.lineStart) end -- proceed with middle lines -- if box.middle is defined set/replace it in line local n = self.lineStart + 1 + skip local line while n < self.lineEnd do self.newText = self.newText..self:NewLine(n, uncomment) n = n + 1 end -- proceed with last line line = editor:GetLine(self.lineEnd) if not uncomment then self.newText = self.newText..self.boxMiddle..line..self.boxEnd else -- if uncomment the last line will ignored, but the trailing "\r\n" must deleted self.newText = self.newText:sub(1, -3) end -- replace the selection with the new toggled text editor:ReplaceSel(self.newText) end } BlockComment:Toggle() As far as I know, it is not possible to overwrite SciTE internal hotkeys. In this case "Ctrl+Shift+B" for IDM_BLOCK_COMMENT. Therefore I used the connection shown here.
      But if overwriting is possible, I would be interested in this solution.
      BlockComment.lua
    • By Bhooshan
      I need to mute an ongoing call on Microsoft teams without activating the window. Teams allows us to mute using shortcut key Ctrl+Shift+m but only when the window is active.
      # Used set option as ongoing call can be with any person which leads to change in Title Name.
      AutoItSetOption ( "WinTitleMatchMode", 2 ) 
      # I am not clear with the control ID which will be good to use here and also the key combination of ^M       
      ControlSend ( "Microsoft Teams", "", "[CLASS:Intermediate D3D Window; INSTANCE:1]", "{ctrl down}")
       
      Can anyone help...!!! 
       

    • By Sayed
      Hi there, 
      I'm new in AutoIt forms and using AutoIt to automate desktop application (able to automate the application normally but facing issue when I've to re-run the application twice within the same script...so need help in this please)
      here is the steps then followed by the issue in a brief : 
      1- run application . 
      2- do some actions (click menus,activate windows,set texts..)
      3- close the application. 
      4- run the application again & access the same controls.
      5- open the same windows again (like step 2)
      6- perform some validations (by getting texts from some text boxes)
      7- close the application again (and repeat 1-7 for 15 times in average )
      The issue 
      * all controls are accessible in the first run and actions done successfully on controls (for steps 1-3) BUT from the second run of the application from step-4 it's able to set focus only the main application window.
      Note: only unique properties used to while mapping the controls. 
      Error that appear in the console :
      UIAWrappers.au3" (1673) : ==> Array variable has incorrect number of subscripts or subscript dimension range exceeded.: $x = Int($t[1] + ($t[3] / 2)) $x = Int($t[1] + (^ ERROR  
      Simple spy code  of one of the controls that has this strange issue(menubar&view menu Item): 
      ;~ *** Standard code maintainable *** #include "UIAWrappers.au3" AutoItSetOption("MustDeclareVars", 1) _UIA_setVar("oP1","Title:=XXX;controltype:=UIA_WindowControlTypeId;class:=WindowsForms10.Window.8.app") ;main app form xxx _UIA_setVar("oP2","Title:=menuStrip1;controltype:=UIA_MenuBarControlTypeId;class:=WindowsForms10.Window.8.app") ;menuStrip1 ;~ $oUIElement=_UIA_getObjectByFindAll("View.mainwindow", "title:=View;ControlType:=UIA_MenuItemControlTypeId", $treescope_subtree) _UIA_setVar("oUIElement","Title:=View;controltype:=UIA_MenuItemControlTypeId;class:=") ;ControlType:=UIA_MenuItemControlTypeId;classname:=") ;~ Actions split away from logical/technical definition above can come from configfiles ;~_UIA_Action("oP1","highlight") _UIA_Action("oP1","setfocus") ;~_UIA_Action("oP2","highlight") _UIA_Action("oP2","setfocus") _UIA_action("oUIElement","highlight") ;~_UIA_action("oUIElement","click")  
       
    • By Fenzik
      Hello All!
      i suggest to set default encoding in Scite4 for Autoit 3 to UTF 8 with Bom encoding, format recommended also in Autoit Help.
      In last editor version, when i open new script, for example Czech characters (č, ř, ž) aren't correct.
      So when i change Encoding to UTF 8 with Bom from Default Code page property state, everithing seems to be OK.
      Thank you and sorry for potentialy duplicated content.
      Fenzik
    • By matwachich
      AutoIt3 Lua Wrapper
      This is an AutoIt3 wrapper for the Lua scripting language. Consider it beta software, but since I will be using it in commercial product, expect it to evolve.
      It has been developped with Lua 5.3.5. Updates will come for new Lua version.
      Everything works just fine, except one (big) limitation: Anything that throws a Lua error (using C setjmp/longjmp functionality) will crash your AutoIt program. That means that it is impossible to use throw errors from an AutoIt function called by Lua (luaL_check*, lua_error...).
      It is hosted in Github: https://github.com/matwachich/au3lua
      Simple example
      #include <lua.au3> #include <lua_dlls.au3> ; Initialize library _lua_Startup(_lua_ExtractDll()) OnAutoItExitRegister(_lua_Shutdown) ; create new execution state $pState = _luaL_newState() _luaopen_base($pState) ; needed for the lua's print function $iRet = _luaL_doString($pState, 'print("Hello, world!")') If $iRet <> $LUA_OK Then ; read the error description on top of the stack ConsoleWrite("!> Error: " & _lua_toString($pState, -1) & @CRLF) Exit EndIf ; close the state to free memory (you MUST call this function, this is not AutoIt's automatic memory management, it's a C library) _lua_close($pState)
×
×
  • Create New...