as long as anything typed in inputbox -> enable other without pressing (Enter...)
-
Recently Browsing 0 members
No registered users viewing this page.
-
Similar Content
-
By odaylton
Text translated from Portuguese by google - please apologize for any errors
First I have to thank the development team for product quality and the ease with which it is possible to develop tools with AutoIt.
I am developing a series of libraries to facilitate the creation of Forms that once it is stable and comprehensive I intend to share here for autoit
But suddenly during development an unexpected effect appeared in simple inputbox fields.
Everything is working fine, however if I'm in an inputbox, don't change its selected content and move focus to another field the selected text remains blue (selected) instead of returning to normal
See the image....
When pricing 3x TABs all remain blue
However if I change the field , when leaving its focus it behaves normally
See the ex below:
1) I selected “tipo Default” and pressed TAB (to test what happens)
2) typed "TESTE" and pressed TAB
3) I pressed TAB 2x again and the "Centralizado" field turned blue
Note: by default, when receiving focus, the text is always automatically selected
Here are some parts of the code:
Gui create:
;modifique o tamanho inicial aqui ;$Form[$Form[0][0]][1] = 600 ;largura =800 ;$Form[$Form[0][0]][2] = 600 ;Atura =600 ;$Form[$Form[0][0]][3] = "RoboAutomato - "&$NomeProjeto $Form[$Form[0][0]][0] = GUICreate($Form[$Form[0][0]][3], _ $Form[$Form[0][0]][1], $Form[$Form[0][0]][2], _ Default, Default, _ BitOR($GUI_SS_DEFAULT_GUI, $WS_MAXIMIZEBOX, $WS_SIZEBOX, $WS_THICKFRAME, $WS_TABSTOP, $WS_POPUP)) GUISetFont($FormFonteTam, _ ;Tamanho da Fonte $FormFonteTipo, _ ;Tipo da Fonte $FormFonteEstilo, _ ;Estilo da Fonte $FormFonteNome) ; Nome da Fonte #Region Criando ToolTip $hGUIToolTip = _GUIToolTip_Create($Form[$Form[0][0]][0], BitOR($_TT_ghTTDefaultStyle, $TTS_BALLOON)) ; balloon style tooltip #EndRegion Criando ToolTip inputs create:
.... InputCriar(200, 200, _ ;Coordenadas Base Default, Default, _ ;Largura e Altura automatica se negativo em função do extremo da janela "|Referencia|", _ ;Label do Input "Tudo Default ou qq diferente de 1,2,3,4: mais simples", _ ;Texto explicativo do InputBox e seu label "Teste do tipo Default", _ ;Valor Default da Input Default, _ ;0 é Defaultou define o estilo Default, _ ;Defini a forma de incerção Default=20 caracteres "CCCCCCCCCCCCCCCCCCCC" Default, _ Default, _ Default, _ ; Tipo de alinhamento em relação a Janela Default, _ ;Tamanho da Fonte Default, _ ;Tipo da Fonte Default, _ ;Estilo da Fonte Default) ; Nome da Fonte InputCriar(200, Default, _ ;Coordenadas Base Default, Default, _ ;Largura e Altura automatica se negativo em função do extremo da janela "|Canto inferior esquerdo|", _ ;Label do Input "Tipo 1: 2 linhas", _ ;Texto explicativo do InputBox e seu label "Tipo 1: 2 linhas", _ ;Valor Default da Input 1, _ ;0 é Defaultou define o estilo Default, _ ;Defini a forma de incerção Default=20 caracteres "CCCCCCCCCCCCCCCCCCCC" Default, _ Default, _ Default, _ ; Tipo de alinhamento em relação a Janela Default, _ ;Tamanho da Fonte Default, _ ;Tipo da Fonte Default, _ ;Estilo da Fonte Default) ; Nome da Fonte ..... Function InputCriar:
Func InputCriar($InputX = Default, $InputY = Default, _ ;Coordenadas Base Canto Superior Esquerdo se não definido proxima linha e coluna $InputWidth = Default, $InputHeight = Default, _ ;Largura e Altura automatica se negativo em função do extremo da janela $InputRotulo = "", _ ;Label do Inpu $InputTip = "", _ ;Texto explicativo do InputBox e seu label $InputDefault = "", _ ;Valor Default da Input $InputAlin = Default, _ ;0 é Defaultou define o estilo $InputMascara = Default, _ ;Defini a forma de incerção Default=20 caracteres "CCCCCCCCCCCCCCCCCCCC" $InputEstilo = Default, _ $InputEstiloEx = Default, _ $InputResizing = Default, _ ; Tipo de alinhamento em relação a Janela $InputTamFonte = Default, _ ;Tamanho da Fonte $InputFonteTipo = Default, _ ;Tipo da Fonte $InputFonteEstilo = Default, _ ;Estilo da Fonte $InputFonteNome = Default) ; Nome da Fonte .... $InputEstilo = BitOR($ES_AUTOHSCROLL, _ $WS_TABSTOP) ... $InputEstiloEx = $WS_EX_CLIENTEDGE ;formato baixo relevo ... $Inputs[$Inputs[0][0]][0] = GUICtrlCreateInput($Mascara5, _ ;Default da Input $Form[$Form[0][0]][6]+$InputX, $Form[$Form[0][0]][7]+$InputY, _ ;Coordenadas Base $InputWidth, $InputHeight, _ ;Altura e largura automatica $InputEstilo, _ ;Estilo $InputEstiloEx) ;Extilo extra ... GUICtrlSetData($Inputs[$Inputs[0][0]][0], $Inputs[$Inputs[0][0]][3]) Return $Inputs[$Inputs[0][0]][0] EndFunc ;==>InputCriar sorry for not putting all the code because there are many libraries and they are in the initial stage of development
What should I change to get Inputbox's behavior back to normal????
Thank you for your attention
-
By nooneclose
Why can I not click on either of my input fields?
#Region ### START Koda GUI section ### Form= Global $Form1 = GUICreate("Form1", 730, 437, 192, 124) ;GUISetFont(14, 800, 0, "MS Sans Serif") GUISetBkColor(0xC0DCC0) Global $Label1 = GUICtrlCreateLabel("Enter your Password. UserName is auto filled", 62, 40, 604, 41, $SS_CENTER) GUICtrlSetFont(-1, 26, 800, 0, "MS Sans Serif") Global $Label2 = GUICtrlCreateLabel("User Name:", 120, 130, 604, 31, $SS_LEFT) GUICtrlSetFont(-1, 20, 800, 0, "MS Sans Serif") Global $Label3 = GUICtrlCreateLabel("Password:", 135, 210, 604, 31, $SS_LEFT) GUICtrlSetFont(-1, 20, 800, 0, "MS Sans Serif") Global $Input1 = GUICtrlCreateInput(@UserName, 274, 130, 185, 32) GUICtrlSetFont(-1, 14, 800, 1, "MS Sans Serif") Global $Input2 = GUICtrlCreateInput("Password", 274, 210, 185, 32, $ES_PASSWORD) GUICtrlSetFont(-1, 14, 800, 0, "MS Sans Serif") Global $OK = GUICtrlCreateButton("OK", 274, 270, 185, 57) GUICtrlSetFont(-1, 20, 800, 0, "MS Sans Serif") GUISetState(@SW_SHOW) #EndRegion ### END Koda GUI section ### While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE Exit Case $OK Global $UserName = GUICtrlRead($Input1) Global $PassWord = GUICtrlRead($Input2) ExitLoop EndSwitch WEnd ; Delete the GUI window GUIDelete()
-
By nacerbaaziz
hello autoit team
please i need your help today
am trying to make the list of features in list view and control it
am using the dism command line to read output
i've made the code
but i found some problems
what i need is the list of features in 2d array
$array[$n][0]= name $array[$i][1] = state
when i tested the code
it give me some results that i don't need to it e.g
------ ------ | --------
or
name | state
i need just the list of features and there state
please help me to do that
here is my example
#RequireAdmin #NoTrayIcon #include <AutoItConstants.au3> Wow64EnableWow64FsRedirection(false) _Windows_Get_Features() func _Windows_Get_Features() local $a_FeaturesArray[1][2] $a_FeaturesArray[0][0] local $i_Dism_Run = Run("DISM /online /english /get-features /format:table", "", @sw_hide, BitOR($STDERR_CHILD, $STDOUT_CHILD)) local $s_OutputDism = "", $a_OutPutDism While 1 $s_OutputDism = StdoutRead($i_Dism_Run) If @error Then exitLoop if ($s_OutputDism = "") or (StringRegExp($s_OutputDism, "^((\-){1,})?(?:\s)\|?(?:\s)((\-){1,})$", 0) = 1) then ContinueLoop if (StringRegExp($s_OutputDism, "((([\s\d\-\+\_\,]{1})\|([\s\d\-\+\_\,]{1})){1,})", 0) = 1) then $a_OutPutDism = StringSplit($s_OutputDism, @lf) for $i = 1 to $a_OutPutDism[0] if msgBox(1, $i, $a_OutPutDism[$i]) = 1 then exitLoop next endIf Wend endFunc func Wow64EnableWow64FsRedirection($b_Enabled) local $h_OpenFS = DLLOpen("kernel32.dll") local $Return = DllCall($h_OpenFS, "boolean", "Wow64EnableWow64FsRedirection", "boolean", $b_Enabled) if @error then DLLClose($h_OpenFS) Return SetError(@error, @extended, -1) else DLLClose($h_OpenFS) Return $Return[0] endIf endFunc
-
By matwachich
Hi AutoIters!
Here is my new UDF about GUIs: it's an enhanced mixture of Advanced InputBox (deprecated) and KODA Parser (deprecated), with additional functions.
What you can do with it:
Parse KODA files and directly create GUIs (_GUIUtils_CreateFromKODA) Parse a simple JSON form definition to simply create advanced InputBoxes with any amount/type of input controls (_GUIUtils_CreateFromJSON) Created GUIs are returned as Scripting.Dictionary objects, and you have helper functions to access GUIs controls by their names (_GUIUtils_HWnd, _GUIUtils_CtrlID, _GUIUtils_HCtrl ...) A function that can make a GUI created from KODA/JSON (defined by it's $oForm object) and make it a modal InputDialogBox (just like InputBox, but returns all entered data as Scripting.Dictionary object) Functions are documented, and there are some examples.
Consider this UDF as beta, but since I'm currently using it in a small commercial project, it should become production ready in near future.
To always get the latest code version, get it from Github (more up to date than this topic).
Update 04/02/2020:
New simple application example Fixed focused control handling in _GUIUtils_InputDialog Reset input values before returning from _GUIUtils_InputDialog Fixed CloseOnEsc in _GUIUtils_InputDialog Fixed Input not reset Fixed all ListBox items are selected Project now on GitHub https://github.com/matwachich/autoit-guiutils/
Update 05/02/2020:
Support for nodate for Date and Time input controls (pass null value) New handling of focused control _GUIUtils_InputDialog: Now, you can specify the focused control in $oInitialData by setting "controlName:focus" = True Updated documentation of _GUIUtils_InputDialog Update 07/02/2020:
Bug corrected when setting Data input control Added: abillity to read a single input control New functions (_GUIUtils_GetInputs, _GUIUtils_WriteInputs), documentation completion. Readme file and screenshots on Github Page
GUIUtils.zip
-
-
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now