Jump to content

Recommended Posts

I am trying to pull information from different files.

They will all be grouped together by name.

In treeview I would have

Last Name << This labels would be the actual name.

-First Name

-Address

-Phone Number

I currently have the above information saved into 4 different ini files.

I am writting the values as Section Keys.

Like so:

IniWriteSection(@ScriptDir & "\First Name.ini", GUICtrlRead($Name),"")

Then read it into an array such as

Local $Name2 = IniReadSectionNames(@ScriptDir & "\First Name.ini")

For $I = 1 To $Name2[0]
        GUICtrlSetData(-1, $Name2[$I] & "|")
    Next

The problem is I can not get the separate values into the TreeView based on what last name is selected.

Here is what I have so far:

Onlastnamesearch("CueClub")
Func Onlastnamesearch($LastName)
    
    

    GUICreate("Notes for " & $LastName, 300, 250, -1, -1, "", $WS_EX_TOPMOST)
GUICtrlCreateLabel("LAST NAME", 5, 10, 60, 40)

Local $Tmp = IniReadSectionNames(@ScriptDir & "\Last Name.ini")

Local $Tmp2 = GUICtrlCreateTreeView(5, 50, 170, 100)
For $I = 1 To $tmp[0]

        $tmp3 = GUICtrlCreateTreeViewItem($tmp[$i], $Tmp2)
        $FirstName = GUICtrlCreateTreeViewItem("First Name", $Tmp3)
        $Address = GUICtrlCreateTreeViewItem("Address", $Tmp3)
        $PhoneNumber = GUICtrlCreateTreeViewItem("Phone Number", $Tmp3)
    Next

    Local $exit = GUICtrlCreateButton("Exit", 5, 160, 50, 20)
    GUISetState(@SW_SHOW)

    While 1
        $msg = GUIGetMsg()
        Select
            Case $msg = $exit Or $msg = $GUI_EVENT_CLOSE
                ExitLoop


                


            
                


        EndSelect
    WEnd

    GUIDelete()
EndFunc   ;==>Example

As you can see above, I can get the treeview to populate, and even the tree items, However I am stumped as to how to pull the data from the separate ini files and display them based on what is clicked on the treeview.

I have read the help file, and searched here a bit, but it is a bit confusing for me.

Any help would be appreciated.

CC

Share this post


Link to post
Share on other sites

cueclub,

Please post some examples of the ini files - without them we are just guessing how to extract the data. :)

If you attach them, you will need to change their extension as the forum software does not accept .ini files. Or you can put the content of each file between [code]...[/code] tags. ;)

M23


Public_Domain.png.2d871819fcb9957cf44f4514551a2935.png Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind

Open spoiler to see my UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Share this post


Link to post
Share on other sites

I seem to have forgotten that part of it Sorry bout that.

The 1st ini is lastname.ini

[lastname1]
[lastname2]
[lastname3]
[lastname4]
[lastname5]
[lastname6]
[lastname7]
[lastname8]
[lastname9]
[lastname10]

The 2nd ini is phonenums.ini

[555-555-5555]
[222-222-2222]
and so on.....

What I need to do is get the Phne number when I click on the last name in the treeview area.

Hope this explains it a bit more.

CC

Share this post


Link to post
Share on other sites

Put them all into one ini file, with the sections being the last name, or last name and first name and the values/keys being the rest of the information. Having them in separate ini files makes it impractical to coordinate a name with a phone number for example.


If I posted any code, assume that code was written using the latest release version unless stated otherwise. Also, if it doesn't work on XP I can't help with that because I don't have access to XP, and I'm not going to.
Give a programmer the correct code and he can do his work for a day. Teach a programmer to debug and he can do his work for a lifetime - by Chirag Gude
How to ask questions the smart way!

I hereby grant any person the right to use any code I post, that I am the original author of, on the autoitscript.com forums, unless I've specifically stated otherwise in the code or the thread post. If you do use my code all I ask, as a courtesy, is to make note of where you got it from.

Back up and restore Windows user files _Array.au3 - Modified array functions that include support for 2D arrays.  -  ColorChooser - An add-on for SciTE that pops up a color dialog so you can select and paste a color code into a script.  -  Customizable Splashscreen GUI w/Progress Bar - Create a custom "splash screen" GUI with a progress bar and custom label.  -  _FileGetProperty - Retrieve the properties of a file  -  SciTE Toolbar - A toolbar demo for use with the SciTE editor  -  GUIRegisterMsg demo - Demo script to show how to use the Windows messages to interact with controls and your GUI.  -   Latin Square password generator

Share this post


Link to post
Share on other sites

Well I suppose I could do that, However when it gets to a company name for example. What would be the best way to write the different phone numbers to the name "Section" ?

Array perhaps?

Share this post


Link to post
Share on other sites

If you put them as phone#1 through phone#xx in the section for the company name, you could use IniReadSection to get all of the keys that are in that section.


If I posted any code, assume that code was written using the latest release version unless stated otherwise. Also, if it doesn't work on XP I can't help with that because I don't have access to XP, and I'm not going to.
Give a programmer the correct code and he can do his work for a day. Teach a programmer to debug and he can do his work for a lifetime - by Chirag Gude
How to ask questions the smart way!

I hereby grant any person the right to use any code I post, that I am the original author of, on the autoitscript.com forums, unless I've specifically stated otherwise in the code or the thread post. If you do use my code all I ask, as a courtesy, is to make note of where you got it from.

Back up and restore Windows user files _Array.au3 - Modified array functions that include support for 2D arrays.  -  ColorChooser - An add-on for SciTE that pops up a color dialog so you can select and paste a color code into a script.  -  Customizable Splashscreen GUI w/Progress Bar - Create a custom "splash screen" GUI with a progress bar and custom label.  -  _FileGetProperty - Retrieve the properties of a file  -  SciTE Toolbar - A toolbar demo for use with the SciTE editor  -  GUIRegisterMsg demo - Demo script to show how to use the Windows messages to interact with controls and your GUI.  -   Latin Square password generator

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Similar Content

    • By nooneclose
      I was running my script and everything was working fine and then it just stopped working. 
      I got this error message:
      !>12:51:55 AutoIt3.exe ended.rc:-1073741819 +>12:51:55 AutoIt3Wrapper Finished. >Exit code: 3221225477 Time: 354.6 I looked that error up and this article (https://www.autoitscript.com/trac/autoit/ticket/2541) said it was fixed a long time ago. 
      I am using version: SciTE Version 4.1.0, how am I getting this error? (first time I got it after running my code 50+ times)
      it crashed while trying to loop through emails. 
      Full output log:
      >"C:\Program Files (x86)\AutoIt3\SciTE\..\AutoIt3.exe" /run /prod /ErrorStdOut /in "C:\" /UserParams +>12:46:01 Starting AutoIt3Wrapper v.18.708.1148.0 SciTE v.4.1.0.0 Keyboard:00000409 OS:WIN_10/ CPU:X64 OS:X64 Environment(Language:0409) CodePage:0 utf8.auto.check:4 +> SciTEDir => C:\Program Files (x86)\AutoIt3\SciTE >Running AU3Check (3.3.14.5) from:C:\Program Files (x86)\AutoIt3 +>12:46:01 AU3Check ended.rc:0 >Running:(3.3.14.5): --> Press Ctrl+Alt+Break to Restart or Ctrl+Break to Stop Action 1: Create a connection to the outlook account at line: 192 Action 1: Finished at line: 205 Action 2: Scan for invaild E-mails at line: 215 Number of SKIPPED unread E-mails: at line: 226 Current email has been changed from Unread to Read. at line: 238 Current email has been changed from Unread to Read. at line: 238 Number of SKIPPED E-mails: 0 at line: 246 Action 2: Finished at line: 248 Action 3: Store vaild E-mails at line: 258 Number of unread E-mails: 17 at line: 290 Action 3: Finished at line: 292 Current number of processed Emails is: 0 at line: 2735 Action 2: Scan for invaild E-mails at line: 215 Number of SKIPPED unread E-mails: at line: 226 Number of SKIPPED E-mails: 0 at line: 246 Action 2: Finished at line: 248 Action 4: Loop through E-mails at line: 302 Action 4: Finished at line: 361 Action 5: Store E-mail's contents at line: 371 Action 5: Finished at line: 495 Action 6: Test to Skip based on location at line: 508 Action 6: Finished at line: 710 Action 7: Check if location needs to be a suite at line: 720 The 'Bathroom' is not mentioned in the Description. Suite not needed. at line: 2180 Action 7: Finished at line: 2186 Opening a new Chrome window. at line: 2747 Action 8: Open Web Browser at line: 2240 _WDStartup: "MicrosoftWebDriver.exe" --verbose Action 8: Finished at line: 2270 Action 9: Navigate to Work Order Tracking at line: 2281 Action 9: Finished at line: 2295 Action 10: Click on Create New Work Order at line: 2306 Action 10: Finished Action 11: Send E-mail Data to it's proper field at line: 2324 Sub-Action 3: Split Long Description at line: 2522 Sub-Action 3: Finished at line: 2576 Work Order Number: 660308 Action 11: Finished at line: 2511 Change status was called at line: 2758 Sub-Action 2: Change E-mail to Read at line: 2223 Current email has been changed from Unread to Read. at line: 2226 Sub-Action 2: Finished at line: 2230 Action 16: Create New Work Order at line: 2705 Action 16: Finished at line: 2719 Current number of processed Emails is: 1 at line: 2735 Action 2: Scan for invaild E-mails at line: 215 Number of SKIPPED unread E-mails: at line: 226 Number of SKIPPED E-mails: 0 at line: 246 Action 2: Finished at line: 248 Action 4: Loop through E-mails at line: 302 Action 4: Finished at line: 361 Action 5: Store E-mail's contents at line: 371 Action 5: Finished at line: 495 Action 6: Test to Skip based on location at line: 508 Action 6: Finished at line: 710 Action 7: Check if location needs to be a suite at line: 720 The 'Bathroom' is not mentioned in the Description. Suite not needed. at line: 2180 Action 7: Finished at line: 2186 Action 11: Send E-mail Data to it's proper field at line: 2324 Work Order Number: 660309 Action 11: Finished at line: 2511 Change status was called at line: 2758 Sub-Action 2: Change E-mail to Read at line: 2223 Current email has been changed from Unread to Read. at line: 2226 Sub-Action 2: Finished at line: 2230 Action 16: Create New Work Order at line: 2705 Action 16: Finished at line: 2719 Current number of processed Emails is: 2 at line: 2735 Action 2: Scan for invaild E-mails at line: 215 Number of SKIPPED unread E-mails: at line: 226 Number of SKIPPED E-mails: 0 at line: 246 Action 2: Finished at line: 248 Action 4: Loop through E-mails at line: 302 Action 4: Finished at line: 361 Action 5: Store E-mail's contents at line: 371 Action 5: Finished at line: 495 Action 6: Test to Skip based on location at line: 508 Action 6: Finished at line: 710 Action 7: Check if location needs to be a suite at line: 720 The 'Bathroom' is not mentioned in the Description. Suite not needed. at line: 2180 Action 7: Finished at line: 2186 Action 11: Send E-mail Data to it's proper field at line: 2324 Sub-Action 3: Split Long Description at line: 2522 Sub-Action 3: Finished at line: 2576 Work Order Number: 660310 Action 11: Finished at line: 2511 Change status was called at line: 2758 Sub-Action 2: Change E-mail to Read at line: 2223 Current email has been changed from Unread to Read. at line: 2226 Sub-Action 2: Finished at line: 2230 Action 16: Create New Work Order at line: 2705 Action 16: Finished at line: 2719 Current number of processed Emails is: 3 at line: 2735 Action 2: Scan for invaild E-mails at line: 215 Number of SKIPPED unread E-mails: at line: 226 Number of SKIPPED E-mails: 0 at line: 246 Action 2: Finished at line: 248 Action 4: Loop through E-mails at line: 302 Action 4: Finished at line: 361 Action 5: Store E-mail's contents at line: 371 Action 5: Finished at line: 495 Action 6: Test to Skip based on location at line: 508 Action 6: Finished at line: 710 Action 7: Check if location needs to be a suite at line: 720 The 'Bathroom' is not mentioned in the Description. Suite not needed. at line: 2180 Action 7: Finished at line: 2186 Action 11: Send E-mail Data to it's proper field at line: 2324 Work Order Number: 660311 Action 11: Finished at line: 2511 Change status was called at line: 2758 Sub-Action 2: Change E-mail to Read at line: 2223 Current email has been changed from Unread to Read. at line: 2226 Sub-Action 2: Finished at line: 2230 Action 16: Create New Work Order at line: 2705 Action 16: Finished at line: 2719 Current number of processed Emails is: 4 at line: 2735 Action 2: Scan for invaild E-mails at line: 215 Number of SKIPPED unread E-mails: at line: 226 Number of SKIPPED E-mails: 0 at line: 246 Action 2: Finished at line: 248 Action 4: Loop through E-mails at line: 302 Action 4: Finished at line: 361 Action 5: Store E-mail's contents at line: 371 Action 5: Finished at line: 495 Action 6: Test to Skip based on location at line: 508 Action 6: Finished at line: 710 Action 7: Check if location needs to be a suite at line: 720 The 'Bathroom' is not mentioned in the Description. Suite not needed. at line: 2180 Action 7: Finished at line: 2186 Action 11: Send E-mail Data to it's proper field at line: 2324 Work Order Number: 660312 Action 11: Finished at line: 2511 Change status was called at line: 2758 Sub-Action 2: Change E-mail to Read at line: 2223 Current email has been changed from Unread to Read. at line: 2226 Sub-Action 2: Finished at line: 2230 Action 16: Create New Work Order at line: 2705 Action 16: Finished at line: 2719 Current number of processed Emails is: 5 at line: 2735 Action 2: Scan for invaild E-mails at line: 215 Number of SKIPPED unread E-mails: at line: 226 Number of SKIPPED E-mails: 0 at line: 246 Action 2: Finished at line: 248 Action 4: Loop through E-mails at line: 302 Action 4: Finished at line: 361 Action 5: Store E-mail's contents at line: 371 Action 5: Finished at line: 495 Action 6: Test to Skip based on location at line: 508 Action 6: Finished at line: 710 Action 7: Check if location needs to be a suite at line: 720 The 'Bathroom' is not mentioned in the Description. Suite not needed. at line: 2180 Action 7: Finished at line: 2186 Action 11: Send E-mail Data to it's proper field at line: 2324 Work Order Number: 660313 Action 11: Finished at line: 2511 Change status was called at line: 2758 Sub-Action 2: Change E-mail to Read at line: 2223 Current email has been changed from Unread to Read. at line: 2226 Sub-Action 2: Finished at line: 2230 Action 16: Create New Work Order at line: 2705 Action 16: Finished at line: 2719 Current number of processed Emails is: 6 at line: 2735 Action 2: Scan for invaild E-mails at line: 215 Number of SKIPPED unread E-mails: at line: 226 Number of SKIPPED E-mails: 0 at line: 246 Action 2: Finished at line: 248 Action 4: Loop through E-mails at line: 302 Action 4: Finished at line: 361 Action 5: Store E-mail's contents at line: 371 Action 5: Finished at line: 495 Action 6: Test to Skip based on location at line: 508 Proper Building format used. Send Location: YT6508 Action 6: Finished at line: 710 Action 7: Check if location needs to be a suite at line: 720 The 'Bathroom' is not mentioned in the Long Description. Suite not needed. at line: 1475 Action 7: Finished at line: 2186 Action 11: Send E-mail Data to it's proper field at line: 2324 Work Order Number: 660314 Action 11: Finished at line: 2511 Change status was called at line: 2758 Sub-Action 2: Change E-mail to Read at line: 2223 Current email has been changed from Unread to Read. at line: 2226 Sub-Action 2: Finished at line: 2230 Action 16: Create New Work Order at line: 2705 Action 16: Finished at line: 2719 Current number of processed Emails is: 7 at line: 2735 Action 2: Scan for invaild E-mails at line: 215 Number of SKIPPED unread E-mails: at line: 226 Number of SKIPPED E-mails: 0 at line: 246 Action 2: Finished at line: 248 Action 4: Loop through E-mails at line: 302 Action 4: Finished at line: 361 Action 5: Store E-mail's contents at line: 371 Action 5: Finished at line: 495 Action 6: Test to Skip based on location at line: 508 Proper Building format used. Send Location: CN2116 Action 6: Finished at line: 710 Action 7: Check if location needs to be a suite at line: 720 The 'Bathroom' is not mentioned in the Long Description. Suite not needed. at line: 1475 Action 7: Finished at line: 2186 Action 11: Send E-mail Data to it's proper field at line: 2324 Sub-Action 3: Split Long Description at line: 2522 Sub-Action 3: Finished at line: 2576 Work Order Number: 660315 Action 11: Finished at line: 2511 Change status was called at line: 2758 Sub-Action 2: Change E-mail to Read at line: 2223 Current email has been changed from Unread to Read. at line: 2226 Sub-Action 2: Finished at line: 2230 Action 16: Create New Work Order at line: 2705 Action 16: Finished at line: 2719 Current number of processed Emails is: 8 at line: 2735 Action 2: Scan for invaild E-mails at line: 215 Number of SKIPPED unread E-mails: at line: 226 Number of SKIPPED E-mails: 0 at line: 246 Action 2: Finished at line: 248 Action 4: Loop through E-mails at line: 302 Action 4: Finished at line: 361 Action 5: Store E-mail's contents at line: 371 Action 5: Finished at line: 495 Action 6: Test to Skip based on location at line: 508 Proper Building format used. Send Location: DT4905 Action 6: Finished at line: 710 Action 7: Check if location needs to be a suite at line: 720 Action 7: Finished at line: 2186 Action 11: Send E-mail Data to it's proper field at line: 2324 Work Order Number: 660316 Action 11: Finished at line: 2511 Change status was called at line: 2758 Sub-Action 2: Change E-mail to Read at line: 2223 Current email has been changed from Unread to Read. at line: 2226 Sub-Action 2: Finished at line: 2230 Action 16: Create New Work Order at line: 2705 Action 16: Finished at line: 2719 Current number of processed Emails is: 9 at line: 2735 Action 2: Scan for invaild E-mails at line: 215 Number of SKIPPED unread E-mails: at line: 226 Number of SKIPPED E-mails: 0 at line: 246 Action 2: Finished at line: 248 Action 4: Loop through E-mails at line: 302 Action 4: Finished at line: 361 Action 5: Store E-mail's contents at line: 371 Action 5: Finished at line: 495 Action 6: Test to Skip based on location at line: 508 Proper Building format used. Send Location: YT6513 Action 6: Finished at line: 710 Action 7: Check if location needs to be a suite at line: 720 Young Tower has no suites! Action 7: Finished at line: 2186 Action 11: Send E-mail Data to it's proper field at line: 2324 Sub-Action 3: Split Long Description at line: 2522 Sub-Action 3: Finished at line: 2576 Work Order Number: 660317 Action 11: Finished at line: 2511 Change status was called at line: 2758 Sub-Action 2: Change E-mail to Read at line: 2223 Current email has been changed from Unread to Read. at line: 2226 Sub-Action 2: Finished at line: 2230 Action 16: Create New Work Order at line: 2705 Action 16: Finished at line: 2719 Current number of processed Emails is: 10 at line: 2735 Action 2: Scan for invaild E-mails at line: 215 Number of SKIPPED unread E-mails: at line: 226 Number of SKIPPED E-mails: 0 at line: 246 Action 2: Finished at line: 248 Action 4: Loop through E-mails at line: 302 Action 4: Finished at line: 361 Action 5: Store E-mail's contents at line: 371 Action 5: Finished at line: 495 Action 6: Test to Skip based on location at line: 508 Proper Building format used. Send Location: BT3310 Action 6: Finished at line: 710 Action 7: Check if location needs to be a suite at line: 720 The 'Bathroom' is not mentioned in the Long Description. Suite not needed. at line: 1475 Action 7: Finished at line: 2186 Action 11: Send E-mail Data to it's proper field at line: 2324 Sub-Action 3: Split Long Description at line: 2522 Sub-Action 3: Finished at line: 2576 Work Order Number: 660318 Action 11: Finished at line: 2511 Change status was called at line: 2758 Sub-Action 2: Change E-mail to Read at line: 2223 Current email has been changed from Unread to Read. at line: 2226 Sub-Action 2: Finished at line: 2230 Action 16: Create New Work Order at line: 2705 Action 16: Finished at line: 2719 Current number of processed Emails is: 11 at line: 2735 Action 2: Scan for invaild E-mails at line: 215 Number of SKIPPED unread E-mails: at line: 226 Number of SKIPPED E-mails: 0 at line: 246 Action 2: Finished at line: 248 Action 4: Loop through E-mails at line: 302 Action 4: Finished at line: 361 Action 5: Store E-mail's contents at line: 371 Action 5: Finished at line: 495 Action 6: Test to Skip based on location at line: 508 Proper Building format used. Send Location: BT3411 Action 6: Finished at line: 710 Action 7: Check if location needs to be a suite at line: 720 The 'Bathroom' is not mentioned in the Description. Suite not needed. at line: 2180 Action 7: Finished at line: 2186 Action 11: Send E-mail Data to it's proper field at line: 2324 Sub-Action 3: Split Long Description at line: 2522 Sub-Action 3: Finished at line: 2576 Work Order Number: 660319 Action 11: Finished at line: 2511 Change status was called at line: 2758 Sub-Action 2: Change E-mail to Read at line: 2223 Current email has been changed from Unread to Read. at line: 2226 Sub-Action 2: Finished at line: 2230 Action 16: Create New Work Order at line: 2705 Action 16: Finished at line: 2719 Current number of processed Emails is: 12 at line: 2735 Action 2: Scan for invaild E-mails at line: 215 Number of SKIPPED unread E-mails: at line: 226 Number of SKIPPED E-mails: 0 at line: 246 Action 2: Finished at line: 248 Action 4: Loop through E-mails at line: 302 Action 4: Finished at line: 361 Action 5: Store E-mail's contents at line: 371 Action 5: Finished at line: 495 Action 6: Test to Skip based on location at line: 508 Proper Building format used. Send Location: DT4519 Action 6: Finished at line: 710 Action 7: Check if location needs to be a suite at line: 720 The 'Bathroom' is not mentioned in the Description. Suite not needed. at line: 2180 Action 7: Finished at line: 2186 Action 11: Send E-mail Data to it's proper field at line: 2324 Sub-Action 3: Split Long Description at line: 2522 Sub-Action 3: Finished at line: 2576 Work Order Number: 660320 Action 11: Finished at line: 2511 Change status was called at line: 2758 Sub-Action 2: Change E-mail to Read at line: 2223 Current email has been changed from Unread to Read. at line: 2226 Sub-Action 2: Finished at line: 2230 Action 16: Create New Work Order at line: 2705 Action 16: Finished at line: 2719 Current number of processed Emails is: 13 at line: 2735 Action 2: Scan for invaild E-mails at line: 215 Number of SKIPPED unread E-mails: at line: 226 Number of SKIPPED E-mails: 0 at line: 246 Action 2: Finished at line: 248 Action 4: Loop through E-mails at line: 302 !>12:51:55 AutoIt3.exe ended.rc:-1073741819 +>12:51:55 AutoIt3Wrapper Finished. >Exit code: 3221225477 Time: 354.6  
    • By VinMe
      I am unable to execute the below script, my requirement is to copy the content from active excel sheet and to display the same.
      Please let me know where i am missing!
      #include <Excel.au3>
      #include <MsgBoxConstants.au3>
      #include <Array.au3>
      #include <StringConstants.au3>
      Local $oExcel = _Excel_Open()
      $LastRow2 = $oExcel.UsedRange.Rows.Count
      $Tissue = _Excel_RangeRead($oExcel, Default, "E1:E" & $LastRow2)
      $TshNr = _Excel_RangeRead($oExcel, Default, "F1:F" & $LastRow2)
      _ArrayDisplay($Tissue)
      _ArrayDisplay($TshNr)
    • By uncommon
      So I have been reading on how to use OAuth2 Service accounts(https://developers.google.com/identity/protocols/OAuth2ServiceAccount) and ran into an issue with autoit I can not solve. To keep this short to communicate to the Google API I need to use a JSON Web signature containing
      {Base64url encoded header}.{Base64url encoded claim set}.

      The Header and claim set work fine but I do not know how to convert them to a byte array using autoit. I have looked around on the forums and website but have not found anything that seems to work. Here is my code.
      #include-once #include <Array.au3> #include <Constants.au3> #include <Debug.au3> #include <File.au3> #include "Json.au3" #include <Process.au3> #include <ProgressConstants.au3> #include <String.au3> #include <WindowsConstants.au3> #include "WinHttp.au3" #include <UnixTime.au3> #include <StringConstants.au3> Global $UnixTime = _TimeGetStamp() $sJWTheader = '{"alg":"RS256","typ":"JWT"}' $sJWTclaimset = '{"iss":"Removed@forprivacy.com","scope":"https://www.googleapis.com/auth/spreadsheets","aud":"https://www.googleapis.com/oauth2/v4/token","exp":' & $UnixTime + 3600 & ',"iat":' & $UnixTime & '}' Local $taiData = DllStructCreate("BYTE[256]") Local $sText = _base64($sJWTheader)&'.'&_base64($sJWTclaimset) DllStructSetData($taiData, 1, StringToBinary($sText, 4)) Local $bvResult = DllStructGetData($taiData, 1) $sJWTSigature = $bvResult $sJWT = _base64($sJWTheader)&'.'&_base64($sJWTclaimset)&'.'&_base64($sJWTSigature) $POSTHeader = "Content-Type: application/x-www-form-urlencoded" $hOpen = _WinHttpOpen() $hConnect = _WinHttpConnect($hOpen, "https://www.googleapis.com/") $sRead = _WinHttpSimpleSSLRequest($hConnect, "POST", "oauth2/v4/token", Default, "grant_type=urn%3Aietf%3Aparams%3Aoauth%3Agrant-type%3Ajwt-bearer&assertion=" & $sJWT) _WinHttpCloseHandle($hConnect) _WinHttpCloseHandle($hOpen) ConsoleWrite($sRead & @LF) The whole bytes thing is beyond with what I know about auotit. I can't tell what I need to fix.
       
       
    • By JackER4565
      Hi, first of all thanks to all the guys who always help people in the forums, I wouldn't be able to do anything if wasn't for your help, even if I don't ask it myself.
       
      I've created this code to get some info on a monitoring network on my work. It relays on _IETableGetCollection and _IETableWriteToArray.
      It works well, but take around 3:25 minutes to get the info from 28 pages (some of them are large and take longer to load, but most of them are small and fast).
      My question is if you see a way to get the program to go faster...
       
      I've tried to make it easy for you to understand and edited somethings with sensitive info.
      (Some of the pages doesn't have the black divider with MIRA in the end, so I need to search if it is there or not.)
       
      #include <IE.au3> #include <array.au3> Local $oIE = _IECreate("about:blank", 0, 0) Local $paginas[28] = [89, 90, 91, 92, 93, 96, 105, 113, 119, 125, 126, 129, 131, 133, 135, 137, 139, 140, 141, 144, 145, 146, 148, 149, 150, 151, 158, 159] Local $Datos_array[0][2] Local $oTable Local $tabla Local $aux_x = 1 Local $ar = 1 Local $Numtables_datos = 0 MsgBox(0, "asd", "asd") For $pag = 0 To UBound($paginas) - 1 Step 1 _IENavigate($oIE, "<WEBSITE URL>" & $paginas[$pag]) ; <<< the pages to load are always the same except for the last digits. _ArrayAdd($Datos_array, $paginas[$pag] & "|" & "Entrante", 0, "|") ; <<<<<<<<<<<<<<<< adds the page number toarray [0, 0] ;############################################ START counts amount of tables with traffic $oTable = _IETableGetCollection($oIE) Local $iNumTables = @extended For $i = 3 To $iNumTables - 2 Step 1 $oTable = _IETableGetCollection($oIE, $i) $nomb_tabla2 = _IETableWriteToArray($oTable) ; <<<<<<<< TABLE TO ARRAY. $string2 = StringStripWS($nomb_tabla2[1][0], 8) If $string2 <> "MIRA" Then $Numtables_datos = $Numtables_datos + 1 Next $tabla_End = $iNumTables - $Numtables_datos ;############################################ FIN $tabla_Start = 4 $tabla_trafico = 2 For $for = 1 To $Numtables_datos Step 1 $oTable = _IETableGetCollection($oIE, $tabla_Start - 1) ; <<<<<<<<<<< NAME OF THE TABLE; row2 = mira $nomb_tabla = _IETableWriteToArray($oTable) ; <<<<<<<< TABLE TO ARRAY ;########################################### ADDS the traffic number into the row $string = StringStripWS($nomb_tabla[1][0], 8) If $string == "MIRA" Then ;si o si pasa por aca 1 vez _ArrayAdd($Datos_array, $nomb_tabla[0][0]) $nomb_aux = $nomb_tabla[0][0] $aux_x = 1 $tabla_trafico = $tabla_trafico + 2 Else ;esto deberia ser por row _ArrayAdd($Datos_array, $nomb_aux & " " & $aux_x) $aux_x = $aux_x + 1 $tabla_trafico = $tabla_trafico + 1 EndIf $oTable = _IETableGetCollection($oIE, $tabla_trafico) Local $aTableData = _IETableWriteToArray($oTable) $bps = _ArrayToString($aTableData, "|", 0, 0, @CRLF, 0, 0) $bps = StringRight($bps, 5) $bps = StringLeft($bps, 4) $trafico_actual = _ArrayToString($aTableData, "|", 0, 0, @CRLF, 2, 2) If $bps == "Gbps" Then $trafico_actual = $trafico_actual * 1000 If $bps == "Kbps" Then $trafico_actual = $trafico_actual / 1000 $Datos_array[$ar][1] = $trafico_actual $ar = $ar + 1 If $string == "MIRA" Then $tabla_Start = $tabla_Start + 2 Else $tabla_Start = $tabla_Start + 1 EndIf Next $ar = $ar + 1 ;~ ############# CAÍDA ############ ;~ If $actual_entrante = 0 Then ;~ $xxx = 0 ;~ Do ;~ MsgBox(0, "Tráfico Caído", $paginas[$i], 5) ;~ $xxx = $xxx + 1 ;~ Until $xxx = 10 ;~ EndIf ;~ ############# CAÍDA ############. Local $Numtables_datos = 0 Next _ArrayDisplay($Datos_array, "Array display") _IEQuit($oIE) Thanks!! 


      monitoria.html
    • By supraaxdd
      Hello,
       
      I have recently tried experimenting with a new feature that I want to add to my program. I wanted to test packet loss, so I opted into a command prompt that displays the necessary data that I want. Now I want to sort out the data by using column sorting if possible by using arrays. My question is: Are you able to sort them out on CMD or is it only Excel spreadsheets?
      Below find the column I want to sort out:
       
      Pinging google.ie [2a00:1450:400b:c01::5e] with 32 bytes of data: Reply from 2a00:1450:400b:c01::5e: time=1033ms Reply from 2a00:1450:400b:c01::5e: time=309ms Reply from 2a00:1450:400b:c01::5e: time=37ms Reply from 2a00:1450:400b:c01::5e: time=732ms Ping statistics for 2a00:1450:400b:c01::5e: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 37ms, Maximum = 1033ms, Average = 527ms I want to extract the Packet loss; the average along with all the results in the "time" column.
      Looking forward for your response!
       
      Kind Regards,
      Supra
×
×
  • Create New...