Switch and Select Cases
-
Recently Browsing 0 members
No registered users viewing this page.
-
Similar Content
-
By abberration
Software Installer
Version: 2.0
It's been been a long year, but I finally got some time to rework this project. I re-wrote everything from scratch because the old version was getting too complicated with so many options and sub-menus. This new version is much easier to use and I have been testing for a few days and it seems very stable.
For those who are new to this software, it helps you install software silently/unattended. This new version tries to determine the silent switch automatically. You can also re-organize the order in which the software installs by dragging & dropping them in the listview. It now supports creating profiles and checks for missing software (and automatically unchecks them, so it does not attempt to install non-existent software). One feature I included was because I have seen several people on Youtube talk about disliking bright screens at night. So, now you can choose from a few color theme (half of them are dark). I dabbled a bit more into GDI+ to draw a few things and show my logo with a transparent background (hint: I'm not good at GDI+).
Under the Help menu, you will find a User Guide, which goes through most of it's features. I included a new icon if you want to use when you compile the script (in the Assets > Misc folder).
If you have questions, comments or suggestions, all are welcome. Hope you enjoy!
Here it is in action:
Software_Installer_2.0.zip
-
By mLipok
Usually when I collect data from DataBase I need to give EndUser a possibility to select rows which should be taken in the processing loop.
I was searching on the forum and I'm not able to find any UDF or even example of how to select data from array.
I have my own solutions but I think they are not worth posting on the forum as it is very old code and I am looking for a better solution.
Could anybody point me to some examples/solutions ?
Thank you in advance.
@mLipok
-
By Jemboy
Recently I was working on a script with icons using GuiCtrkCreatIcon.
I decided to change the sub folder name of the icons to a more meaning name, however made a typo.
I tested the .exe on my test computer and it worked flawlessly (because both icon folder where on my test computer) 😁
But after I installed the script on the intended computers , I got chaos!😵
Zooming into the problem, I discovered, that because the icons could not be found, the ControlID were returned with a value of 0
and thus played havoc within the GuiGetMsg() switch/case statement.
I have been able to reproduce this (see example)
#include <GUIConstantsEx.au3> ;============================================================================================================ ; PLEASE, do not save this example in the example folder: C:\Program Files (x86)\AutoIt3\Examples\Helpfile ;============================================================================================================ Example() Func Example() GUICreate(" My GUI Icons", 250, 250) $Icon1 = GUICtrlCreateIcon("shell32.dll", 10, 20, 20) $Icon2 = GUICtrlCreateIcon(@ScriptDir & '\Extras\horse.ani', -1, 20, 40, 32, 32) $Icon3 = GUICtrlCreateIcon("shell32.dll", 7, 20, 75, 32, 32) GUISetState(@SW_SHOW) ;$Icon2 = -1 ; ==> When this line is uncommented the script "works", so -1 could be a potential fix. ; Loop until the user exits. While 1 Switch GUIGetMsg() Case $GUI_EVENT_CLOSE ExitLoop Case $Icon2 Beep (500,500) EndSwitch WEnd GUIDelete() EndFunc ;==>Example If you save the above script outside the Autoit example folder and run it, it will keep beeping because GuiCtrlCreatIcon did not find horse.ani and return $Icon2=0.
At the moment GUICtrlCreateIcon () only returns the conntrolID on success and 0 on failure.
I would like to propose a return of -1 on failure, so a existing and working script won't go awry when the icon can not be found.
-
By Dave1
Hello everyone,
I have several signals on the screen that need to be monitored while a program is running. These signals are scattered around an image which is maximized on 4 equal resolution screens - the AutoIT Window Info does not recognize any objects on the program meaning that I'm left with the PixelSearch() and PixelCheckSum() functions to monitor the signals:
The signals are as small as a 5x5 pixel area and their coordinates are known.
I've been digging around for a while now in this forum about the PixelSearch() and PixelCheckSum() and found some interesting and useful ideas for the use of them. I also came across some other UDF functions like MultiMon(), FastFind(), TtColXY() and the ImageSearch2015 scripts that might be useful for the final output. I don't know if hovering the mouse by using TtColXY() and output its ToolTip() information onto the log file will be faster than using PixelSearch() and/or PixelCheckSum() in a loop for all signals' coordinates.
The colours of the signals are below:
red - 0x00FF00 (opaque red)
green - 0x00FF00 (opaque green)
yellow - 0xFFFF00 (opaque yellow)
black - 0x000000 (opaque black, default colour)
EDIT:
The desired output is to monitor and record/log the changes and status of each inside a .txt file or a .csv with the below format:
Local Machine Time Signal, Change, delta-t
14:32:07 Signal1 Green - Yellow DELTA-t1
14:34:02 Signal1 Yellow - Red DELTA-t1
14:35:14 Signal2 Yellow - Red DELTA-t2
...
Below is the code I came up with.
#include <AutoItConstants.au3> #include <MsgBoxConstants.au3> #include <misc.au3> #include <Date.au3> #include <Array.au3> #include <File.au3> #include <ScreenCapture.au3> #include <WinAPI.au3> #include <WinAPIHObj.au3> Global $program_name, $program_open, $Wname, $tCurrent Global $button_xy[2] = [150, 175] Global $iniColour, $ColourCheck, $NewCheck Global $Red, $Green, $Blue, $Nil Global $sFilePath = @ScriptDir & "\Signals_status.txt" Global $SignalID[10] = ["Signal_1", "Signal_2", "Signal_3", "Signal_4", "Signal_5", "Signal_6", "Signal_7", "Signal_8", "Signal_9", "Signal_10"] $program_name = "Signals.exe" $Wname = "Training Task 3" $program_open = ShellExecute($program_name, @ScriptDir) WinWait($Wname) $iniColour = "0x" & Hex(PixelGetColor($button_xy[0], $button_xy[1]), 6) ;~ $iniChecksum = "0x" & Hex(PixelChecksum($button_xy[0], $button_xy[0] - 5, $button_xy[1], $button_xy[1] + 5), 6) $ColourCheck = "0x" & Hex(PixelChecksum($button_xy[0], $button_xy[0] - 5, $button_xy[1], $button_xy[1] + 5, 1, $Wname), 6) ConsoleWrite(_ColourID($iniColour) & " // " & _ColourID($ColourCheck) & @CRLF) ;~ $ColourCheck = "0x " & Hex(PixelGetColor($button_xy[0], $button_xy[1]), 6) $iniColour = $ColourCheck ;$iniChecksum = $currentCheck Do ;~ While 1 _WindowOnTop() _Close_Notepad() $NewCheck = "0x" & Hex(PixelChecksum($button_xy[0], $button_xy[0] - 5, $button_xy[1], $button_xy[1] + 5, 1, $Wname), 6) $tCurrent = _NowCalc() $LogFile = FileOpen($sFilePath, 2) FileWriteLine($LogFile, "Local Machine Time " & "Signal, " & "Change, " & "delta-t") ;~ $ColourCheck = "0x" & Hex(PixelChecksum($button_xy[0], $button_xy[0] - 5, $button_xy[1], $button_xy[1] + 5, 1, $Wname), 6) If $ColourCheck <> $NewCheck Then ;If there's a colour change from the current colour $ColourCheck = $NewCheck Local $tChange, $NewCheckID, $ColourCheckID, $sLogMsg $tChange = _NowCalc() ConsoleWrite("Colour changed!" & @CRLF) $ColourCheckID = _ColourID($ColourCheck) $NewCheckID = _ColourID($NewCheck) $iTimeDiffh = _DateDiff('h', $tChange, $tCurrent) ; time difference in hours $iTimeDiffm = _DateDiff('n', $tChange, $tCurrent) ; time difference in minutes $iTimeDiffs = _DateDiff('s', $tChange, $tCurrent) ; time difference in seconds $durationCheckSum = $iTimeDiffh & ":" & $iTimeDiffm & ":" & $iTimeDiffs ; Timestamp of the signal until PixelCheckSum $sLogMsg = " " & $SignalID[0] & " " & $ColourCheckID & " - " & $NewCheckID & " " & $durationCheckSum _FileWriteLog($LogFile, $sLogMsg) ElseIf $ColourCheck = $NewCheck Then Local $Colour_check = _ColourID("0x" & Hex(PixelChecksum($button_xy[0], $button_xy[0] - 5, $button_xy[1], $button_xy[1] + 5, 1, $Wname), 6)) ConsoleWrite($tCurrent & " " & $Colour_check & @CRLF) EndIf FileClose($sFilePath) Until Not ProcessExists($program_name) And Not WinExists($Wname) _IsProgramOpen() Func _Close_Notepad() $notepad_open = ProcessExists("notepad.exe") ? ProcessClose("notepad.exe") : ProcessClose("notepad.exe") $notepad_open = WinActive("[CLASS:Notepad]") ? WinClose("[CLASS:Notepad]") : ProcessClose("notepad.exe") EndFunc ;==>_Close_Notepad Func _ColourID($sColour) $Red = Int("0x" & StringRegExpReplace($sColour, "(..)(..)(..)(..)", "\2")) $Green = Int("0x" & StringRegExpReplace($sColour, "(..)(..)(..)(..)", "\3")) $Blue = Int("0x" & StringRegExpReplace($sColour, "(..)(..)(..)(..)", "\4")) If $Green > $Blue And $Red > $Blue And $Green >= 0xB0 And $Red >= 0xB0 Then $sCol = "Yellow" ElseIf $Blue > 0xE0 And $Green > 0xE0 And $Red > 0xE0 Then $sCol = "White" ElseIf $Blue > 0x50 And $Blue = $Green And $Blue = $Red Then $sCol = "Grey" ElseIf $Red > $Green And $Red > $Blue And $Red > 0x70 Then $sCol = "Red" ElseIf $Green > $Red And $Green >= $Blue And $Green > 0x70 Then $sCol = "Green" ElseIf $Blue > $Red And $Blue > $Green And $Blue > 0x70 Then $sCol = "Blue" Else $sCol = "Nil" EndIf Return $sCol EndFunc ;==>_ColourID Func _WindowOnTop() WinActivate($Wname) WinSetOnTop($Wname, "", $WINDOWS_ONTOP) Opt("MouseCoordMode", 0) EndFunc ;==>_WindowOnTop Func _IsProgramOpen() If Not ProcessExists($program_name) And Not WinExists($Wname) Then Break(1) EndIf EndFunc ;==>_IsProgramOpen When the program is running, the window opens in the centre of the screen however, the PixelChecksum function is not looking at the correct area. In addition:
1 - I'm not sure about how to put the message into the log file.
2 - I tested this script but it is not recording the message into the log file.
3 - Is there other way to calculate the duration in these lines?
$iTimeDiffh = _DateDiff('h', $tChange, $tCurrent) ; time difference in hours $iTimeDiffm = _DateDiff('n', $tChange, $tCurrent) ; time difference in minutes $iTimeDiffs = _DateDiff('s', $tChange, $tCurrent) ; time difference in seconds $durationCheckSum = $iTimeDiffh & ":" & $iTimeDiffm & ":" & $iTimeDiffs ; Timestamp of the signal until PixelCheckSum $sLogMsg = " " & $SignalID[0] & " " & $ColourCheckID & " - " & $NewCheckID & " " & $durationCheckSum _FileWriteLog($LogFile, $sLogMsg) Thanks in advance!
-
By AnRios
Greetings friends!
I have been searching the help file and Google, with no success, to find a way to validate images from a folder and mark them somehow in a spreadsheet.
My context is: I made a code with the help of the community that captures images from SAP and saves them in a folder. Now I'd like to identify which ones are black, if it's even possible. I read about PixelSearch, but did not get it to work. If someone could point me in the right direction, I'd appreciate it.
The code I'm using:
#include <File.au3> #include <ScreenCapture.au3> $x = InputBox("Title", "Amount of Images To Capture", "", "", 320, 150) If @error Then Exit $x = Number($x) $y = InputBox("Title", "Batch Name", "", "", 320, 150) If @error Then Exit $y = String($y) HotKeySet("{HOME}", "printscreen") Func printscreen() $FilePath =("C:\Fiscalizacao\Fotos"&"/") $FileName = $y & " - " $FileList = _FileListToArray($FilePath, $FileName & '*.jpg', 1) If Not IsArray($FileList) Then $FileName&= '1.jpg' Else $FileName &= $FileList[0] + 1 & '.jpg' EndIf _ScreenCapture_Capture($FilePath & "\" & $FileName, 354, 196, 673, 436) EndFunc HotKeySet("{BS}", "Terminate") Func Terminate() Exit 0 EndFunc For $i = 1 to $x Opt("WinTitleMatchMode",2) If NOT WinExists("Relatorio") Then MsgBox(0, "Atenção!", "Relatório do MOM deve estar aberto!") Call("Terminate") EndIf Opt("WinTitleMatchMode",2) WinActivate("Relatorio") Sleep (250) Opt("WinTitleMatchMode",2) SendKeepActive("Relatorio") Send("{ENTER}") Sleep (1000) Send("{HOME}") Sleep (200) Opt("WinTitleMatchMode",2) WinActivate("Relatorio") Send("{DOWN}") Next
-
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now