Jump to content
Sign in to follow this  

Recommended Posts

I would like to programmatically check to see if a given tracker has information on the torrent I specify. This requires that the SHA-1 Info Hash of a torrent be encoded to make valid requests. I read from: http://nakkaya.com/2009/12/03/bittorrent-tracker-protocol/ If you don't pay attention to the spec and send this directly to tracker you will get an error this should be in URL Encoded form. Padding every two chars with % sign also doesn't work, been there done that don't waste your time. Any hex in the hash that corresponds to a unreserved character should be replaced,

a-z A-Z 0-9 -_.~

Partition the hex in to chunks of two and check if the hex corresponds to any of these values, if they do replace them with the unreserved char.

So that a hash such as,

123456789abcdef123456789abcdef123456789a

becomes,

%124Vx%9a%bc%de%f1%23Eg%89%ab%cd%ef%124Vx%9a

notice that hex 34 became 4 which is what it is in ASCII. You can test the correctness of your hashes using the tracker url but don't request from announce request from file,

http://some.tracker.com/file?info_hash=hash

If you get a torrent back that means you have the correct hash.

I have tried the above and failed. Here's my code:

$testStr = "123456789abcdef123456789abcdef123456789a"
ConsoleWrite(_EncodeHash($testStr) & @CRLF)
Func _EncodeHash($sString)
    If (Not IsString($sString)) Or $sString = "" Then Return SetError(1, 0, 0)
    Local $aArray = StringRegExp($sString, "(?s).{1," & 2 & "}", 3), $sEncodedHash
For $i = 0 To UBound($aArray) -1
    If StringInStr($sString, Chr(Dec($aArray[$i]))) Then
     $sEncodedHash &= Chr(Dec($aArray[$i]))
    Else
     $sEncodedHash &= "%" & $aArray[$i]
    EndIf
    Next
Return $sEncodedHash
EndFunc

If you follow the first link in my post there is an example but I'm unfamiliar with the language being used. Thanks for any help.

Edited by Decipher

Share this post


Link to post
Share on other sites

Hey JohnOne, you're absolutely correct. I consider myself to be an important individual. I would usually have something negative to say but I'm being humble. I'll wait until after I've made six thousand posts and never decide to suggest not bumping threads unless the OP feels important. Thanks for your first suggestion. I can't wait to endure number two but I'd rather stay on topic. ;)

Share this post


Link to post
Share on other sites

Decipher,

This is forum etiquette. Plus the support you get is from people who want to help not have to help, so learn how to be patient.


UDF List:

 
_AdapterConnections()_AlwaysRun()_AppMon()_AppMonEx()_ArrayFilter/_ArrayReduce_BinaryBin()_CheckMsgBox()_CmdLineRaw()_ContextMenu()_ConvertLHWebColor()/_ConvertSHWebColor()_DesktopDimensions()_DisplayPassword()_DotNet_Load()/_DotNet_Unload()_Fibonacci()_FileCompare()_FileCompareContents()_FileNameByHandle()_FilePrefix/SRE()_FindInFile()_GetBackgroundColor()/_SetBackgroundColor()_GetConrolID()_GetCtrlClass()_GetDirectoryFormat()_GetDriveMediaType()_GetFilename()/_GetFilenameExt()_GetHardwareID()_GetIP()_GetIP_Country()_GetOSLanguage()_GetSavedSource()_GetStringSize()_GetSystemPaths()_GetURLImage()_GIFImage()_GoogleWeather()_GUICtrlCreateGroup()_GUICtrlListBox_CreateArray()_GUICtrlListView_CreateArray()_GUICtrlListView_SaveCSV()_GUICtrlListView_SaveHTML()_GUICtrlListView_SaveTxt()_GUICtrlListView_SaveXML()_GUICtrlMenu_Recent()_GUICtrlMenu_SetItemImage()_GUICtrlTreeView_CreateArray()_GUIDisable()_GUIImageList_SetIconFromHandle()_GUIRegisterMsg()_GUISetIcon()_Icon_Clear()/_Icon_Set()_IdleTime()_InetGet()_InetGetGUI()_InetGetProgress()_IPDetails()_IsFileOlder()_IsGUID()_IsHex()_IsPalindrome()_IsRegKey()_IsStringRegExp()_IsSystemDrive()_IsUPX()_IsValidType()_IsWebColor()_Language()_Log()_MicrosoftInternetConnectivity()_MSDNDataType()_PathFull/GetRelative/Split()_PathSplitEx()_PrintFromArray()_ProgressSetMarquee()_ReDim()_RockPaperScissors()/_RockPaperScissorsLizardSpock()_ScrollingCredits_SelfDelete()_SelfRename()_SelfUpdate()_SendTo()_ShellAll()_ShellFile()_ShellFolder()_SingletonHWID()_SingletonPID()_Startup()_StringCompact()_StringIsValid()_StringRegExpMetaCharacters()_StringReplaceWholeWord()_StringStripChars()_Temperature()_TrialPeriod()_UKToUSDate()/_USToUKDate()_WinAPI_Create_CTL_CODE()_WinAPI_CreateGUID()_WMIDateStringToDate()/_DateToWMIDateString()Au3 script parsingAutoIt SearchAutoIt3 PortableAutoIt3WrapperToPragmaAutoItWinGetTitle()/AutoItWinSetTitle()CodingDirToHTML5FileInstallrFileReadLastChars()GeoIP databaseGUI - Only Close ButtonGUI ExamplesGUICtrlDeleteImage()GUICtrlGetBkColor()GUICtrlGetStyle()GUIEventsGUIGetBkColor()Int_Parse() & Int_TryParse()IsISBN()LockFile()Mapping CtrlIDsOOP in AutoItParseHeadersToSciTE()PasswordValidPasteBinPosts Per DayPreExpandProtect GlobalsQueue()Resource UpdateResourcesExSciTE JumpSettings INISHELLHOOKShunting-YardSignature CreatorStack()Stopwatch()StringAddLF()/StringStripLF()StringEOLToCRLF()VSCROLLWM_COPYDATAMore Examples...

Updated: 22/04/2018

Share this post


Link to post
Share on other sites

I just took this from the spec:

Note that all binary data in the URL (particularly info_hash and peer_id) must be properly escaped. This means any byte not in the set 0-9, a-z, A-Z, '.', '-', '_' and '~', must be encoded using the "%nn" format, where nn is the hexadecimal value of the byte. (See RFC1738 for details.)

For a 20-byte hash of x12x34x56x78x9axbcxdexf1x23x45x67x89xabxcdxefx12x34x56x78x9a,

The right encoded form is %124Vx%9A%BC%DE%F1%23Eg%89%AB%CD%EF%124Vx%9A

I think I realize what I'm doing wrong....... I'm still waiting for help guies and no, I'm not trying to bump this thread it is relevant information.

Share this post


Link to post
Share on other sites

Decipher,

I do not like the tone you have taken so far in this thread - please alter it in future. ;)

M23


Public_Domain.png.2d871819fcb9957cf44f4514551a2935.png Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind

Open spoiler to see my UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Share this post


Link to post
Share on other sites

Yes ma'am, I have solved my problem by myself. Heres the code:

#include <array.au3>
$INFOHASH = "123456789abcdef123456789abcdef123456789a"
ConsoleWrite(_EncodeHash($INFOHASH) & @CRLF)
Func _EncodeHash($sString)
    If (Not IsString($sString)) Or $sString = "" Then Return SetError(1, 0, 0)
    Local $aArray = StringRegExp($sString, "(?s).{1," & 2 & "}", 3), $sEncodedHash
For $i = 0 To UBound($aArray) -1
    If StringInStr("0123456789abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ.-_~", Chr(Dec($aArray[$i]))) Then
     $sEncodedHash &= Chr(Dec($aArray[$i]))
    Else
     $sEncodedHash &= "%" & $aArray[$i]
    EndIf
    Next
Return $sEncodedHash
EndFunc
;%124Vx%9a%bc%de%f1%23Eg%89%ab%cd%ef%124Vx%9a
;%124Vx%9a%bc%de%f1%23Eg%89%ab%cd%ef%124Vx%9a

Would you mind telling exactly how long I shall wait in the future before bumping, if it is even allowed.

Edited by Decipher

Share this post


Link to post
Share on other sites

Decipher,

I am a "Sir", thank you! ;)

Like most public forums we prefer you not to bump your own thread within 24 hours. Remember this is not a 24/7 support forum - those who answer are only here because they like helping others and have some time to spare. You just have to wait until someone who knows something about your particular problem, and is willing to help, comes online. Be patient and someone will answer eventually. Or if not - tough! :)

M23


Public_Domain.png.2d871819fcb9957cf44f4514551a2935.png Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind

Open spoiler to see my UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Share this post


Link to post
Share on other sites

I think you should wait atleast a day before bumping.

Some people have a thing called "A life", you've probably heard of it, and therefore can't be online all the time.

Post, wait, and if nothing, bump after 24 hours.


[font="helvetica, arial, sans-serif"]Hobby graphics artist, using gimp.Automating pc stuff, using AutoIt.Listening to music, using Grooveshark.[/font]Scripts:[spoiler]Simple ScreenshotSaves you alot of trouble when taking a screenshot!Don't remember what happened with this, but aperantly the exe is all i got.If you don't want to run it, simply don't._IsRun UDFIt figures out if the script has ben ran before based on the info in a ini file.If you don't want to use exactly what i wrote, you can use it as inspiration.[/spoiler]

Share this post


Link to post
Share on other sites

I think you should wait atleast a day before bumping.

Some people have a thing called "A life", you've probably heard of it, and therefore can't be online all the time.

Post, wait, and if nothing, bump after 24 hours.

@Maffe811,

Seriously, You have to bored out of your mind taking the time out of your precious life to say what has been said once than again by a mod.

Sorry Melba32 I had to tell this poor guy.

Edited by Decipher

Share this post


Link to post
Share on other sites

Well, not really, i was reading the topic and was quite entertained by your behaviour and i took my time even finding some snacks.

So when i finally got arround to post a reply, some had beaten me to it.

But from the post you made answearing JohnOne i was just waiting for you to step over the line and get thrown out.

You should read the forum rules, they mention:

Do not be obnoxious, rude or in general a nuisance to the smooth operation of the forum.


[font="helvetica, arial, sans-serif"]Hobby graphics artist, using gimp.Automating pc stuff, using AutoIt.Listening to music, using Grooveshark.[/font]Scripts:[spoiler]Simple ScreenshotSaves you alot of trouble when taking a screenshot!Don't remember what happened with this, but aperantly the exe is all i got.If you don't want to run it, simply don't._IsRun UDFIt figures out if the script has ben ran before based on the info in a ini file.If you don't want to use exactly what i wrote, you can use it as inspiration.[/spoiler]

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

  • Similar Content

    • By nooneclose
      Good morning, all. I am having a very hard time figuring out why my code "breaks" every second (and every time after) iteration in the loop. 
      I am trying to automate the process of filling out a form for work. I need to find and send data to seven fields and get data from one field. 
      Here are a couple of pictures of the fields I am interacting with. The fields are on the same forum/page. (the green boxed ones)
       


      Here is my code so far. 
       
      #AutoIt3Wrapper_Au3Check_Parameters=-q -d -w 1 -w 2 -w 3 -w- 4 -w 5 -w 6 -w- 7 ;Allows for the combining of UDFs by disabling error messages. (I get error messages for "problems" that dont actually exsist) #include <AD.au3> ;Allows Active Directory functions #include <Array.au3> ;Allows special Array functions #include <Constants.au3> ;Allows constants to be used #include <Date.au3> ;Allows Date and Time functions #include <DateTimeConstants.au3> ;Allows Date and Time constant functions #include "DTC.au3" ;Allows Custom Date and Time functions #include <IE.au3> ;Allows Internet Explorer functions #include <Misc.au3> ;Allows the "is pressed" function to be used #include <MsgBoxConstants.au3> ;Allows Message box function to be used #include <OutlookEX.au3> ;Allows the Outlook functions #include <String.au3> ;Allows special string functions #include <StringConstants.au3> ;Allows String constant functions #include <Timers.au3> ;Allows timer functions ;#RequireAdmin ;Requests admin privliges before starting program ; Special UDFs for UIA automation #include <EditConstants.au3> #include <GUIConstantsEx.au3> #include <WindowsConstants.au3> #include <debug.au3> #include <WinAPI.au3> #include "UIAWrappers.au3" #AutoIt3Wrapper_UseX64=N ;Should be used for stuff like tagpoint having right struct etc. when running on a 64 bits os ;******************************************************************************* ; Format and send the vaild E-mail's contents ;******************************************************************************* Func SendEmailData() ConsoleWrite("Action 16: Send E-mail Data to it's proper fields" & " at line: " & @ScriptLineNumber & @CRLF) ;=============================================================================== ; Store the Elements ;=============================================================================== ; Description _UIA_setVar("oDescription","Title:=Description:;controltype:=UIA_EditControlTypeId;class:=") ; Long Description OK Button _UIA_setVar("oLongButton","Title:=Long Description;controltype:=UIA_ImageControlTypeId;class:=") _UIA_setVar("oLongOk","Title:=OK;controltype:=UIA_ButtonControlTypeId;class:=") ; Work Order Number _UIA_setVar("oWorkOrderNum","Title:=Work Order:;controltype:=UIA_EditControlTypeId;class:=") ; Location _UIA_setVar("oLocation","Title:=Location:;controltype:=UIA_EditControlTypeId;class:=") ; Work Type _UIA_setVar("oWorkType","Title:=Work Type:;controltype:=UIA_EditControlTypeId;class:=") ; Reported By Date _UIA_setVar("oDate","Title:=Reported Date:;controltype:=UIA_EditControlTypeId;class:=") ; Reported By Person _UIA_setVar("oCustomer","Title:=Reported By:;controltype:=UIA_EditControlTypeId;class:=") ; Reported By Email _UIA_setVar("oEmail","Title:=Reported By Email:;controltype:=UIA_EditControlTypeId;class:=") ; Reported By Phone _UIA_setVar("oPhone","Title:=Reported By Phone:;controltype:=UIA_EditControlTypeId;class:=") Local $WorkType = "CM" ; Send the stored data to the proper field Local $stringSplitter = ", " Local $conCateStrings = $eDescription & $stringSplitter & $eComments Local $ComStringLen = StringLen($eComments) Local $TrimedDesc = StringTrimLeft($eDescription, 1) ;=============================================================================== ; Check to see if the Description and the Long Description can be concatenated If StringLen($conCateStrings) <= 100 Then Sleep(2000) _UIA_action("oDescription","highlight") Sleep(300) _UIA_Action("oDescription","setfocus") Sleep(300) _UIA_action("oDescription","click") Sleep(500) _UIA_action("oDescription", "setvalue", $conCateStrings) _UIA_action("oDescription","highlight") ; Wipes the long description so no duplication happens $eComments = "" ;=============================================================================== ; Send the Long Description in place of the Description ElseIf $TrimedDesc = "Other" AND $ComStringLen <= 100 Then Sleep(2000) _UIA_action("oDescription","highlight") Sleep(300) _UIA_Action("oDescription","setfocus") Sleep(300) _UIA_action("oDescription","click") Sleep(500) _UIA_action("oDescription", "setvalue", $eComments) _UIA_action("oDescription","highlight") Sleep(2000) ;=============================================================================== ; Send the Long Description in place of the Description and Send the rest of it to the Long Description field ElseIf $TrimedDesc = "Other" AND $ComStringLen >= 100 Then SplitLongDesc() ; Description gets the first 100 Characters $eDescription = $FirstLine ; Long Description gets the rest $eComments = StringMid($sNewString, 101) Sleep(2000) _UIA_action("oDescription","highlight") Sleep(500) _UIA_Action("oDescription","setfocus") Sleep(500) _UIA_action("oDescription","click") Sleep(500) _UIA_action("oDescription", "setvalue", $eDescription) _UIA_action("oDescription","highlight") Sleep(2000) ;=============================================================================== ; Send the Description and some of the Long Description ElseIf StringLen($eDescription) <= 80 AND $eComments <> "" Then SplitLongDesc() ; Description gets the first 100 Characters $eDescription = $FirstLine ; Long Description gets the rest $eComments = StringMid($sNewString, 101) Sleep(2000) _UIA_action("oDescription","highlight") Sleep(300) _UIA_Action("oDescription","setfocus") Sleep(300) _UIA_action("oDescription","click") Sleep(500) _UIA_action("oDescription", "setvalue", $eDescription) _UIA_action("oDescription","highlight") Sleep(2000) ;=============================================================================== ; Send the original Description Else Sleep(2000) _UIA_action("oDescription","highlight") Sleep(300) _UIA_Action("oDescription","setfocus") Sleep(300) _UIA_action("oDescription","click") Sleep(500) _UIA_action("oDescription", "setvalue", $eDescription) _UIA_action("oDescription","highlight") Sleep(2000) EndIf ;=============================================================================== ; Click the long description button Sleep(2000) _UIA_action("oLongButton","highlight") Sleep(300) _UIA_Action("oLongButton","setfocus") Sleep(300) _UIA_action("oLongButton", "click") _UIA_action("oLongButton", "highlight") _UIA_action("oLongButton", "click") Sleep(2000) ;=============================================================================== ; Send the long description Sleep(1000) if StringLen($eComments) >= 250 Then Sleep(500) Send($eComments) Sleep(10000) ElseIf StringLen($eComments) >= 150 Then Sleep(500) Send($eComments) Sleep(6000) ElseIf StringLen($eComments) <= 10 Then Sleep(500) Send($eComments) Sleep(1500) Else Sleep(500) Send($eComments) Sleep(4000) EndIf ;=============================================================================== ; Click the ok button Sleep(2000) _UIA_action("oLongOk","highlight") Sleep(300) _UIA_Action("oLongOk","setfocus") Sleep(300) _UIA_action("oLongOk", "click") _UIA_action("oLongOk", "highlight") Sleep(2000) ;=============================================================================== ; The work order number _UIA_action("oWorkOrderNum","highlight") Sleep(300) _UIA_Action("oWorkOrderNum","setfocus") Sleep(300) _UIA_action("oWorkOrderNum", "getvalue", $WoNum) _UIA_action("oWorkOrderNum","highlight") ;MsgBox("", "Work order number", $WoNum[2]) ;=============================================================================== ; The Location field Sleep(2000) _UIA_action("oLocation","highlight") Sleep(300) _UIA_Action("oLocation","setfocus") Sleep(300) _UIA_action("oLocation", "setvalue", $eLocation) _UIA_action("oLocation","highlight") ;=============================================================================== ; The Work Type field Sleep(2000) _UIA_action("oWorkType","highlight") Sleep(300) _UIA_Action("oWorkType","setfocus") Sleep(300) _UIA_action("oWorkType", "setvalue", $WorkType) _UIA_action("oWorkType","highlight") ;=============================================================================== ; The Reported By Date Sleep(2000) _UIA_action("oDate","highlight") Sleep(300) _UIA_Action("oDate","setfocus") Sleep(300) _UIA_action("oDate", "setvalue", $eSentOn) _UIA_action("oDate","highlight") ;=============================================================================== ; The Requested by field Sleep(2000) _UIA_action("oCustomer","highlight") Sleep(300) _UIA_Action("oCustomer","setfocus") Sleep(300) _UIA_action("oCustomer", "setvalue", $eReportedBy) _UIA_action("oCustomer","highlight") ;=============================================================================== ; The Requested by E-mail Sleep(2000) _UIA_action("oEmail","highlight") Sleep(300) _UIA_Action("oEmail","setfocus") Sleep(300) _UIA_action("oEmail", "setvalue", $eSenderAddress) _UIA_action("oEmail","highlight") ;=============================================================================== ; The Requested by Phone Sleep(2000) _UIA_action("oPhone","highlight") Sleep(300) _UIA_Action("oPhone","setfocus") Sleep(300) _UIA_action("oPhone", "setvalue", $eRoomPhone) _UIA_action("oPhone","highlight") MouseClick("left", 1843, 437, 2) Sleep(1500) Send("{UP}") Send("{UP}") Send("{UP}") Send("{UP}") Send("{UP}") Send("{UP}") Send("{UP}") Send("{UP}") Send("{UP}") Send("{UP}") Send("{UP}") Send("{UP}") Send("{UP}") Send("{UP}") Send("{UP}") Send("{UP}") Send("{UP}") Send("{UP}") Send("{UP}") Send("{UP}") Send("{UP}") Send("{UP}") Send("{UP}") Send("{UP}") Send("{UP}") Send("{UP}") Send("{UP}") Send("{UP}") Send("{UP}") Send("{UP}") Send("{UP}") Send("{UP}") Sleep(1000) MouseClick("left", 591, 279, 2) Sleep(3000) $lCount += 1 ConsoleWrite("Action 16: Finished" & " at line: " & @ScriptLineNumber & @CRLF) Sleep(2000) EndFunc  
      That is not all the code but that is the function that keeps "breaking" and by "breaking" I mean the program acts like it doesn't know where the description field is after the first iteration.
      My code will just click somewhere in the far top left corner and somehow shrink the browser in the process of finding the description field.  
       
      The code works perfectly the first iteration but after that, it "breaks" (doesn't know where to click/send data to). 
      As always any help is greatly appreciated. 
       
      NOTE: By the time 'Action 16' runs Chrome has already been opened and has navigated to the proper webpage.  I am trying to loop 'Action 16' multiple times. I do not leave that webpage while looping. 
    • By nooneclose
      Good morning, I am having a hard time figuring out how to read or get the valve (628850) from the red squared box in the picture below. 

      Here is what I have tried so far. (see code below. Also, I'm very sorry my code is sloppy.)
       
      #AutoIt3Wrapper_Au3Check_Parameters=-q -d -w 1 -w 2 -w 3 -w- 4 -w 5 -w 6 -w- 7 ;Allows for the combining of UDFs by disabling error messages. (I get error messages for "problems" that dont actually exsist) #include <AD.au3> ;Allows Active Directory functions #include <Array.au3> ;Allows special Array functions #include <Constants.au3> ;Allows constants to be used #include <Date.au3> ;Allows Date and Time functions #include <DateTimeConstants.au3> ;Allows Date and Time constant functions #include "DTC.au3" ;Allows Custom Date and Time functions #include <IE.au3> ;Allows Internet Explorer functions #include <Misc.au3> ;Allows the "is pressed" function to be used #include <MsgBoxConstants.au3> ;Allows Message box function to be used #include <OutlookEX.au3> ;Allows the Outlook functions #include <String.au3> ;Allows special string functions #include <StringConstants.au3> ;Allows String constant functions #include <Timers.au3> ;Allows timer functions ;#RequireAdmin ;Requests admin privliges before starting program #include <EditConstants.au3> #include <GUIConstantsEx.au3> #include <WindowsConstants.au3> #include <debug.au3> #include <WinAPI.au3> #include "UIAWrappers.au3" #AutoIt3Wrapper_UseX64=N ;Should be used for stuff like tagpoint having right struct etc. when running on a 64 bits os ; Sets the script to accept coordinates off the program window and not the screen AutoItSetOption('MouseCoordMode', 0) ; Defines the time it takes to send text to the software/program AutoItSetOption('SendKeyDelay', 10) ;******************************************************************************* ; Close the script if "End" is pressed ;******************************************************************************* Local $oMyError = ObjEvent("AutoIt.Error","MyErrFunc") HotKeySet("{END}", "Terminate") Func Terminate() MsgBox($MB_ICONINFORMATION, "DEATH", "AI Stoped!", 5) Exit EndFunc ;******************************************************************************* ; Script has started ;******************************************************************************* Sleep(2000) MsgBox($MB_ICONINFORMATION, "WO_AI", "AI Started!", 5) Sleep(1500) ;******************************************************************************* ; Main functions of the program ;******************************************************************************* test() ;=============================================================================== ; Function Definitions ;=============================================================================== Func test() MsgBox("", "TESTing", "Timer Started") Sleep(15000) MsgBox("", "TESTing", "timer Finished") ;~ *** Standard code maintainable *** AutoItSetOption("MustDeclareVars", 1) _UIA_setVar("oP1","Title:=Work Order Tracking - Google Chrome;controltype:=UIA_PaneControlTypeId;class:=Chrome_WidgetWin_1") ;Work Order Tracking - Google Chrome _UIA_setVar("oP2","Title:=Work Order Tracking;controltype:=UIA_DocumentControlTypeId;class:=Chrome_RenderWidgetHostHWND") ;Work Order Tracking _UIA_setVar("oP3","Title:=  Work Order Tracking;controltype:=UIA_CustomControlTypeId;class:=") ;  Work Order Tracking _UIA_setVar("oP4","Title:=main form;controltype:=UIA_GroupControlTypeId;class:=") ;main form _UIA_setVar("oP5","Title:=;controltype:=UIA_CustomControlTypeId;class:=") ; _UIA_setVar("oP6","Title:=View Work Details;controltype:=UIA_CustomControlTypeId;class:=") ;View Work Details _UIA_setVar("oP7","Title:=;controltype:=UIA_CustomControlTypeId;class:=") ; _UIA_setVar("oP8","Title:=Location: Location description Long Description Include Children? Include Children: unchecked Include Ancestors? Include Ancestors: unchecked Include History? Include History: unchecked Work Scope Minimize Work Scope Section Minimize Work Scope Section Work Scope Work Close Filter CTRL+Z Close Filter CTRL+Z Filter Filter Table Filter Table Next Row [CTRL+Down Arrow] Next Row [CTRL+Down Arrow] 1 - 4 of 4 Download Hide Table: Work Hide Table: Work Work Work Table Button Group;controltype:=UIA_CustomControlTypeId;class:=") ;Location: Location description Long Description Include Children? Include Children: unchecked Include Ancestors? Include Ancestors: unchecked Include History? Include History: unchecked Work Scope Minimize Work Scope Section Minimize Work Scope Section Work Scope Work Close Filter CTRL+Z Close Filter CTRL+Z Filter Filter Table Filter Table Next Row [CTRL+Down Arrow] Next Row [CTRL+Down Arrow] 1 - 4 of 4 Download Hide Table: Work Hide Table: Work Work Work Table Button Group _UIA_setVar("oP9","Title:=;controltype:=UIA_CustomControlTypeId;class:=") ; _UIA_setVar("oP10","Title:=Work;controltype:=UIA_TableControlTypeId;class:=") ;Work _UIA_setVar("oP11","Title:=;controltype:=UIA_CustomControlTypeId;class:=") ; _UIA_setVar("oP12","Title:=Record Detail Menu;controltype:=UIA_DataItemControlTypeId;class:=") ;Record Detail Menu ; Clicks on the main record field _UIA_setVar("oUIElement","Title:=Record ;controltype:=UIA_EditControlTypeId;class:=") ;ControlType:=UIA_EditControlTypeId;classname:=") ; Trying to click on / get value from the 3rd from top record field (this is me trying to use the id to access the record box) Local $otest =_UIA_getObjectByFindAll("Record.mainwindow", "id:=ma9038468_tdrow_[C\:1]_txt-tb[R\:3].;ControlType:=UIA_DataItemControlTypeId", $treescope_subtree) ;~ Actions split away from logical/technical definition above can come from configfiles ;~_UIA_Action("oP1","highlight") _UIA_Action("oP1","setfocus") ;~_UIA_Action("oP2","highlight") _UIA_Action("oP2","setfocus") ;~_UIA_Action("oP3","highlight") _UIA_Action("oP3","setfocus") ;~_UIA_Action("oP4","highlight") _UIA_Action("oP4","setfocus") ;~_UIA_Action("oP5","highlight") _UIA_Action("oP5","setfocus") ;~_UIA_Action("oP6","highlight") _UIA_Action("oP6","setfocus") ;~_UIA_Action("oP7","highlight") _UIA_Action("oP7","setfocus") ;~_UIA_Action("oP8","highlight") _UIA_Action("oP8","setfocus") ;~_UIA_Action("oP9","highlight") _UIA_Action("oP9","setfocus") ;~_UIA_Action("oP10","highlight") _UIA_Action("oP10","setfocus") ;~_UIA_Action("oP11","highlight") _UIA_Action("oP11","setfocus") ;~_UIA_Action("oP12","highlight") _UIA_Action("oP12","setfocus") _UIA_action("oUIElement","highlight") _UIA_Action("oUIElement","setfocus") _UIA_action("oUIElement","click") Sleep(2500) _UIA_action($otest,"highlight") _UIA_Action($otest,"setfocus") _UIA_action($otest,"click") MsgBox("", "End of program", "death") EndFunc I'm using $otest to try and click on the box, through the id that chrome gives it, with the UIA functions. I am kind of completely new to the UIA UDF but I do find it capable of doing a lot of cool things.   
      as always any help would be greatly appreciated. I know how hard you people hard. Thank you for taking the time to help us. 
    • By Valnurat
      I have this code and I want to control the size of the picture that is being showing on the GUI not matter how big the source of the picture is.
      To draw the picture you just add the x and y position, but I would like a end position too.
      #include <GDIPlus.au3> #include <GUIConstantsEx.au3> #include <AD.au3> Global $sUsername = 'shortname' Example() Func Example() _GDIPlus_Startup() ;initialize GDI+ Local Const $iWidth = 300, $iHeight = 300, $iBgColor = 0xFFE8FF ;$iBgColor format RRGGBB Local $hGUI = GUICreate("GDI+ Example (" & @ScriptName & ")", $iWidth, $iHeight) ;create a test GUI GUISetBkColor($iBgColor, $hGUI) ;set GUI background color GUISetState(@SW_SHOW) Local $hGraphics = _GDIPlus_GraphicsCreateFromHWND($hGUI) ;create a graphics object from a window handle Local $hBitmap = _GDIPlus_BitmapCreateFromMemory(_ADO_USERIMAGE($sUsername)) ;load binary saved GIF image and convert it to GDI+ bitmap format if Not @error Then Local $iW = _GDIPlus_ImageGetWidth($hBitmap), $iH = _GDIPlus_ImageGetHeight($hBitmap) MsgBox(0, $iW, $iH) _GDIPlus_GraphicsDrawImage($hGraphics, $hBitmap, 15, 20) ;display image in GUI EndIf Do Until GUIGetMsg() = $GUI_EVENT_CLOSE ;cleanup GDI+ resources _GDIPlus_BitmapDispose($hBitmap) _GDIPlus_GraphicsDispose($hGraphics) _GDIPlus_Shutdown() GUIDelete($hGUI) EndFunc ;==>Example Func _ADO_USERIMAGE($sUsename) _AD_Open() Local $oADO_USERIMAGE = _AD_GetObjectAttribute($sUseName, 'thumbnailPhoto') If @error Then Exit _AD_Close() Return $oADO_USERIMAGE EndFunc  
    • By junichironakashima
      Im creating a code that will work in this sequence:
      1. Copy the text (question) in one atea of the screen
      2. Catch the 2 strings (number)
      3. Multiply the 2 strings ( $1*$2)
      4. Click the next area to put the answer
      5. Paste the answer
       
      This is my code
       
      MouseClick($MOUSE_CLICK_LEFT, 479, 802, 3, 1) ;Clicking all of the text
      Send("^c") 
      $x = StringRegExpReplace(ClipGet(), 'What is (\d*) x (\d*) \?$', "$1*$2")
      MouseClick($MOUSE_CLICK_LEFT, 480, 844, 1, 1)
      ClipPut($x)
      Send("^v")
       
      However the output is this
      $1*$2
       
      How can I make it solve itself? Because I tried this code:
      MouseClick($MOUSE_CLICK_LEFT, 479, 802, 3, 1) ;Clicking all of the text
      Send("^c")
      MouseClick($MOUSE_CLICK_LEFT, 480, 844, 1, 1) $x = Execute(StringRegExpReplace(ClipGet(), 'What is (\d*) x (\d*) \?$', "$1*$2"))
      ClipPut($x)
      Send("^v")
      Output is just blank text

    • By junichironakashima
      I have a windows 10 pc and Im trying to create an automatic solving in calculator with a simple worded question (example: What is 45 x 53 ?). thou I cant make the select...Case...EndSelect statement work, here is my code
      #include <AutoItConstants.au3> HotKeySet("{F4}", "ExitProg") Func ExitProg() Exit 0 EndFunc MouseClick($MOUSE_CLICK_LEFT, 417, 659, 2, 1) Send("^c") Func valData() $Chek = "What " If ClipGet() == $Chek Then Check() Else Do MouseClick($MOUSE_CLICK_LEFT, 417, 659, 2, 3) Send("^c") Sleep(500) Until ClipGet() == $Chek EndIf EndFunc Func Check() $Chek2 = "?" c1() c2() c3() c4() c5() c6() c7() Select Case c1() = $Chek2 ;two MouseClick($MOUSE_CLICK_LEFT, 453, 645, 2, 1) Send("^c") Sleep(150) MouseClick($MOUSE_CLICK_LEFT, 1347, 197, 1, 1) Send("^v") Sleep(150) MouseClick($MOUSE_CLICK_LEFT, 474, 645, 2, 1) Send("^c") Sleep(150) MouseClick($MOUSE_CLICK_LEFT, 1347, 197, 1, 1) Send("*") Send("^v") Send("{NUMPADENTER}") Case c2() = $Chek2 ;three MouseClick($MOUSE_CLICK_LEFT, 453, 645, 2, 1) Send("^c") Sleep(150) MouseClick($MOUSE_CLICK_LEFT, 1347, 197, 1, 1) Send("^v") Sleep(150) MouseClick($MOUSE_CLICK_LEFT, 482, 645, 2, 1) Send("^c") Sleep(150) MouseClick($MOUSE_CLICK_LEFT, 1347, 197, 1, 1) Send("*") Send("^v") Send("{NUMPADENTER}") Case c3() = $Chek2 ;four MouseClick($MOUSE_CLICK_LEFT, 453, 645, 2, 1) Send("^c") Sleep(150) MouseClick($MOUSE_CLICK_LEFT, 1347, 197, 1, 1) Send("^v") Sleep(150) MouseClick($MOUSE_CLICK_LEFT, 487, 645, 2, 1) Send("^c") Sleep(150) MouseClick($MOUSE_CLICK_LEFT, 1347, 197, 1, 1) Send("*") Send("^v") Send("{NUMPADENTER}") Case c4() = $Chek2 ;five MouseClick($MOUSE_CLICK_LEFT, 453, 645, 2, 1) Send("^c") Sleep(150) MouseClick($MOUSE_CLICK_LEFT, 1347, 197, 1, 1) Send("^v") Sleep(150) MouseClick($MOUSE_CLICK_LEFT, 495, 645, 2, 1) Send("^c") Sleep(150) MouseClick($MOUSE_CLICK_LEFT, 1347, 197, 1, 1) Send("*") Send("^v") Send("{NUMPADENTER}") Case c5() = $Chek2 ;six MouseClick($MOUSE_CLICK_LEFT, 453, 645, 2, 1) Send("^c") Sleep(150) MouseClick($MOUSE_CLICK_LEFT, 1347, 197, 1, 1) Send("^v") Sleep(150) MouseClick($MOUSE_CLICK_LEFT, 495, 645, 2, 1) Send("^c") Sleep(150) MouseClick($MOUSE_CLICK_LEFT, 1347, 197, 1, 1) Send("*") Send("^v") Send("{NUMPADENTER}") Case c6() = $Chek2 ;seven MouseClick($MOUSE_CLICK_LEFT, 453, 645, 2, 1) Send("^c") Sleep(150) MouseClick($MOUSE_CLICK_LEFT, 1347, 197, 1, 1) Send("^v") Sleep(150) MouseClick($MOUSE_CLICK_LEFT, 509, 645, 2, 1) Send("^c") Sleep(150) MouseClick($MOUSE_CLICK_LEFT, 1347, 197, 1, 1) Send("*") Send("^v") Send("{NUMPADENTER}") Case c7() = $Chek2 ;eight MouseClick($MOUSE_CLICK_LEFT, 453, 645, 2, 1) Send("^c") Sleep(150) MouseClick($MOUSE_CLICK_LEFT, 1347, 197, 1, 1) Send("^v") Sleep(150) MouseClick($MOUSE_CLICK_LEFT, 509, 645, 2, 1) Send("^c") Sleep(150) MouseClick($MOUSE_CLICK_LEFT, 1347, 197, 1, 1) Send("*") Send("^v") Send("{NUMPADENTER}") Case Else Exit EndSelect EndFunc Func c1() MouseClick($MOUSE_CLICK_LEFT, 485, 643, 2, 1) Send("^c") EndFunc Func c2() MouseClick($MOUSE_CLICK_LEFT, 493, 644, 2, 1) Send("^c") EndFunc Func c3() MouseClick($MOUSE_CLICK_LEFT, 498, 645, 2, 1) Send("^c") EndFunc Func c4() MouseClick($MOUSE_CLICK_LEFT, 508, 647, 2, 1) Send("^c") EndFunc Func c5() MouseClick($MOUSE_CLICK_LEFT, 514, 645, 2, 1) Send("^c") EndFunc Func c6() MouseClick($MOUSE_CLICK_LEFT, 523, 645, 2, 1) Send("^c") EndFunc Func c7() MouseClick($MOUSE_CLICK_LEFT, 530, 645, 2, 1) Send("^c") EndFunc valData() MouseClick($MOUSE_CLICK_LEFT, 1349, 196, 1, 1) ;clicking the answer in calc Send("^c") Send("{DEL}") MouseClick($MOUSE_CLICK_LEFT, 499, 706, 1, 1) Send("^v") Exit  
×
×
  • Create New...