Jump to content

Task Scheduler semi-working


Recommended Posts

Hi Guys,

The attached script collects logs from various servers on my network, prints them into logs.txt, and emails them to me, daily. When I run the compiled script by clicking on the EXE it works beautifully.

However, when it's run through the scheduler, I get an email with a blank txt file. This happens when I run the scheduled task manually and when it runs automatically.

The SMTP part is from Jos, Thank you Jos.

#region Logs retriever
$log = "log.txt"

If FileExists($log) Then
FileDelete($log)
EndIf
RunWait(@ComSpec & " /c " & "psloglist.exe @servers.txt -d 1 -f we -r > " & $log, "", @SW_HIDE)
#endregion

;
;##################################
; Include
;##################################
#Include #region Logs retriever
$log = "log.txt"

If FileExists($log) Then
FileDelete($log)
EndIf
RunWait(@ComSpec & " /c " & "psloglist.exe @servers.txt -d 1 -f we -r > " & $log, "", @SW_HIDE)
#endregion

;
;##################################
; Include
;##################################
#Include <file.au3>
;##################################
; Variables
;##################################
$SmtpServer = "smtp.emailsrvr.com"              ; address for the smtp-server to use - REQUIRED
$FromName = "Logs"                      ; name from who the email was sent
$FromAddress = "server@respondpower.com" ; address from where the mail should come
$ToAddress = "tspitz@majorenergy.com"   ; destination address of the email - REQUIRED
$Subject = "Daily Server Logs"                   ; subject from the email - can be anything you want it to be
$Body = "Warning and Error logs."                              ; the messagebody from the mail - can be left blank but then you get a blank mail
$AttachFiles = $log                       ; the file(s) you want to attach seperated with a ; (Semicolon) - leave blank if not needed
$CcAddress = ""       ; address for cc - leave blank if not needed
$BccAddress = ""     ; address for bcc - leave blank if not needed
$Importance = "Normal"                  ; Send message priority: "High", "Normal", "Low"
$Username = "server@respondpower.com"                    ; username for the account used from where the mail gets sent - REQUIRED
$Password = "ab12cd34"                  ; password for the account used from where the mail gets sent - REQUIRED
$IPPort = 25                            ; port used for sending the mail
$ssl = 0                                ; enables/disables secure socket layer sending - put to 1 if using httpS
;~ $IPPort=465                          ; GMAIL port used for sending the mail
;~ $ssl=1                               ; GMAILenables/disables secure socket layer sending - put to 1 if using httpS

;##################################
; Script
;##################################
Global $oMyRet[2]
Global $oMyError = ObjEvent("AutoIt.Error", "MyErrFunc")
$rc = _INetSmtpMailCom($SmtpServer, $FromName, $FromAddress, $ToAddress, $Subject, $Body, $AttachFiles, $CcAddress, $BccAddress, $Importance, $Username, $Password, $IPPort, $ssl)
If @error Then
    MsgBox(0, "Error sending message", "Error code:" & @error & "  Description:" & $rc)
EndIf
;
; The UDF
Func _INetSmtpMailCom($s_SmtpServer, $s_FromName, $s_FromAddress, $s_ToAddress, $s_Subject = "", $as_Body = "", $s_AttachFiles = "", $s_CcAddress = "", $s_BccAddress = "", $s_Importance="Normal", $s_Username = "", $s_Password = "", $IPPort = 25, $ssl = 0)
    Local $objEmail = ObjCreate("CDO.Message")
    $objEmail.From = '"' & $s_FromName & '" <' & $s_FromAddress & '>'
    $objEmail.To = $s_ToAddress
    Local $i_Error = 0
    Local $i_Error_desciption = ""
    If $s_CcAddress <> "" Then $objEmail.Cc = $s_CcAddress
    If $s_BccAddress <> "" Then $objEmail.Bcc = $s_BccAddress
    $objEmail.Subject = $s_Subject
    If StringInStr($as_Body, "<") And StringInStr($as_Body, ">") Then
        $objEmail.HTMLBody = $as_Body
    Else
        $objEmail.Textbody = $as_Body & @CRLF
    EndIf
    If $s_AttachFiles <> "" Then
        Local $S_Files2Attach = StringSplit($s_AttachFiles, ";")
        For $x = 1 To $S_Files2Attach[0]
            $S_Files2Attach[$x] = _PathFull($S_Files2Attach[$x])
;~          ConsoleWrite('@@ Debug : $S_Files2Attach[$x] = ' & $S_Files2Attach[$x] & @LF & '>Error code: ' & @error & @LF) ;### Debug Console
            If FileExists($S_Files2Attach[$x]) Then
                ConsoleWrite('+> File attachment added: ' & $S_Files2Attach[$x] & @LF)
                $objEmail.AddAttachment($S_Files2Attach[$x])
            Else
                ConsoleWrite('!> File not found to attach: ' & $S_Files2Attach[$x] & @LF)
                SetError(1)
                Return 0
            EndIf
        Next
    EndIf
    $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendusing") = 2
    $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpserver") = $s_SmtpServer
    If Number($IPPort) = 0 then $IPPort = 25
    $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpserverport") = $IPPort
    ;Authenticated SMTP
    If $s_Username <> "" Then
        $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpauthenticate") = 1
        $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendusername") = $s_Username
        $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendpassword") = $s_Password
    EndIf
    If $ssl Then
        $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpusessl") = True
    EndIf
    ;Update settings
    $objEmail.Configuration.Fields.Update
    ; Set Email Importance
    Switch $s_Importance
        Case "High"
            $objEmail.Fields.Item ("urn:schemas:mailheader:Importance") = "High"
        Case "Normal"
            $objEmail.Fields.Item ("urn:schemas:mailheader:Importance") = "Normal"
        Case "Low"
            $objEmail.Fields.Item ("urn:schemas:mailheader:Importance") = "Low"
    EndSwitch
    $objEmail.Fields.Update
    ; Sent the Message
    $objEmail.Send
    If @error Then
        SetError(2)
        Return $oMyRet[1]
    EndIf
    $objEmail=""
EndFunc   ;==>_INetSmtpMailCom
;
;
; Com Error Handler
Func MyErrFunc()
    $HexNumber = Hex($oMyError.number, 8)
    $oMyRet[0] = $HexNumber
    $oMyRet[1] = StringStripWS($oMyError.description, 3)
    ConsoleWrite("### COM Error !  Number: " & $HexNumber & "   ScriptLine: " & $oMyError.scriptline & "   Description:" & $oMyRet[1] & @LF)
    SetError(1); something to check for when this function returns
    Return
EndFunc   ;==>MyErrFunc
;##################################
; Variables
;##################################
$SmtpServer = "smtp.myserver.com" ; address for the smtp-server to use - REQUIRED
$FromName = "Logs" ; name from who the email was sent
$FromAddress = "server@myserver.com" ; address from where the mail should come
$ToAddress = "tspitz@myserver.com" ; destination address of the email - REQUIRED
$Subject = "Daily Server Logs" ; subject from the email - can be anything you want it to be
$Body = "Warning and Error logs." ; the messagebody from the mail - can be left blank but then you get a blank mail
$AttachFiles = $log ; the file(s) you want to attach seperated with a ; (Semicolon) - leave blank if not needed
$CcAddress = "" ; address for cc - leave blank if not needed
$BccAddress = "" ; address for bcc - leave blank if not needed
$Importance = "Normal" ; Send message priority: "High", "Normal", "Low"
$Username = "server@myserver.com" ; username for the account used from where the mail gets sent - REQUIRED
$Password = "mypassword" ; password for the account used from where the mail gets sent - REQUIRED
$IPPort = 25 ; port used for sending the mail
$ssl = 0 ; enables/disables secure socket layer sending - put to 1 if using httpS
;~ $IPPort=465 ; GMAIL port used for sending the mail
;~ $ssl=1 ; GMAILenables/disables secure socket layer sending - put to 1 if using httpS

;##################################
; Script
;##################################
Global $oMyRet[2]
Global $oMyError = ObjEvent("AutoIt.Error", "MyErrFunc")
$rc = _INetSmtpMailCom($SmtpServer, $FromName, $FromAddress, $ToAddress, $Subject, $Body, $AttachFiles, $CcAddress, $BccAddress, $Importance, $Username, $Password, $IPPort, $ssl)
If @error Then
MsgBox(0, "Error sending message", "Error code:" & @error & " Description:" & $rc)
EndIf
;
; The UDF
Func _INetSmtpMailCom($s_SmtpServer, $s_FromName, $s_FromAddress, $s_ToAddress, $s_Subject = "", $as_Body = "", $s_AttachFiles = "", $s_CcAddress = "", $s_BccAddress = "", $s_Importance="Normal", $s_Username = "", $s_Password = "", $IPPort = 25, $ssl = 0)
Local $objEmail = ObjCreate("CDO.Message")
$objEmail.From = '"' & $s_FromName & '" <' & $s_FromAddress & '>'
$objEmail.To = $s_ToAddress
Local $i_Error = 0
Local $i_Error_desciption = ""
If $s_CcAddress <> "" Then $objEmail.Cc = $s_CcAddress
If $s_BccAddress <> "" Then $objEmail.Bcc = $s_BccAddress
$objEmail.Subject = $s_Subject
If StringInStr($as_Body, "<") And StringInStr($as_Body, ">") Then
$objEmail.HTMLBody = $as_Body
Else
$objEmail.Textbody = $as_Body & @CRLF
EndIf
If $s_AttachFiles <> "" Then
Local $S_Files2Attach = StringSplit($s_AttachFiles, ";")
For $x = 1 To $S_Files2Attach[0]
$S_Files2Attach[$x] = _PathFull($S_Files2Attach[$x])
;~ ConsoleWrite('@@ Debug : $S_Files2Attach[$x] = ' & $S_Files2Attach[$x] & @LF & '>Error code: ' & @error & @LF) ;### Debug Console
If FileExists($S_Files2Attach[$x]) Then
ConsoleWrite('+> File attachment added: ' & $S_Files2Attach[$x] & @LF)
$objEmail.AddAttachment($S_Files2Attach[$x])
Else
ConsoleWrite('!> File not found to attach: ' & $S_Files2Attach[$x] & @LF)
SetError(1)
Return 0
EndIf
Next
EndIf
$objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendusing") = 2
$objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpserver") = $s_SmtpServer
If Number($IPPort) = 0 then $IPPort = 25
$objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpserverport") = $IPPort
;Authenticated SMTP
If $s_Username <> "" Then
$objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpauthenticate") = 1
$objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendusername") = $s_Username
$objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendpassword") = $s_Password
EndIf
If $ssl Then
$objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpusessl") = True
EndIf
;Update settings
$objEmail.Configuration.Fields.Update
; Set Email Importance
Switch $s_Importance
Case "High"
$objEmail.Fields.Item ("urn:schemas:mailheader:Importance") = "High"
Case "Normal"
$objEmail.Fields.Item ("urn:schemas:mailheader:Importance") = "Normal"
Case "Low"
$objEmail.Fields.Item ("urn:schemas:mailheader:Importance") = "Low"
EndSwitch
$objEmail.Fields.Update
; Sent the Message
$objEmail.Send
If @error Then
SetError(2)
Return $oMyRet[1]
EndIf
$objEmail=""
EndFunc ;==>_INetSmtpMailCom
;
;
; Com Error Handler
Func MyErrFunc()
$HexNumber = Hex($oMyError.number, 8)
$oMyRet[0] = $HexNumber
$oMyRet[1] = StringStripWS($oMyError.description, 3)
ConsoleWrite("### COM Error ! Number: " & $HexNumber & " ScriptLine: " & $oMyError.scriptline & " Description:" & $oMyRet[1] & @LF)
SetError(1); something to check for when this function returns
Return
EndFunc ;==>MyErrFunc

Any ideas are greatly appreciated!

Thanks in advance.

Edited by tes5884
Link to comment
Share on other sites

  • Moderators

What credentials are you running it under when you run it through Task Scheduler?

"Profanity is the last vestige of the feeble mind. For the man who cannot express himself forcibly through intellect must do so through shock and awe" - Spencer W. Kimball

How to get your question answered on this forum!

Link to comment
Share on other sites

You need the full path to the files you're accessing in the first part of the script. When you're not logged in, or the task scheduler is running the script, it can't find the files because you don't have a path pointing to them.

Also, move your #include lines to the top of the script, you have them stuck in there after the first part of the script. It's probably not going to be a problem with this script because of the way it's written, but believe me if you start writing bigger scripts and start putting them in the middle like that, it's going to cause all sorts of problems.

If I posted any code, assume that code was written using the latest release version unless stated otherwise. Also, if it doesn't work on XP I can't help with that because I don't have access to XP, and I'm not going to.
Give a programmer the correct code and he can do his work for a day. Teach a programmer to debug and he can do his work for a lifetime - by Chirag Gude
How to ask questions the smart way!

I hereby grant any person the right to use any code I post, that I am the original author of, on the autoitscript.com forums, unless I've specifically stated otherwise in the code or the thread post. If you do use my code all I ask, as a courtesy, is to make note of where you got it from.

Back up and restore Windows user files _Array.au3 - Modified array functions that include support for 2D arrays.  -  ColorChooser - An add-on for SciTE that pops up a color dialog so you can select and paste a color code into a script.  -  Customizable Splashscreen GUI w/Progress Bar - Create a custom "splash screen" GUI with a progress bar and custom label.  -  _FileGetProperty - Retrieve the properties of a file  -  SciTE Toolbar - A toolbar demo for use with the SciTE editor  -  GUIRegisterMsg demo - Demo script to show how to use the Windows messages to interact with controls and your GUI.  -   Latin Square password generator

Link to comment
Share on other sites

Still not working. This is the edited version:

#Include
#RequireAdmin

TraySetState(2)

#region Logs retriever
$log = "C:UserstspitzDropboxCodingLogMailerlog.txt"

If FileExists("C:UserstspitzDropboxCodingLogMailerlog.txt") Then
FileDelete("C:UserstspitzDropboxCodingLogMailerlog.txt")
EndIf
RunWait(@ComSpec & " /k C:UserstspitzDropboxCodingLogMailerpsloglist.exe @C:UserstspitzDropboxCodingLogMailerservers.txt -d 1 -f we -r > C:UserstspitzDropboxCodingLogMailerlog.txt", "", @SW_SHOW)
#endregion

$SmtpServer = "smtp.myserver.com" ; address for the smtp-server to use - REQUIRED
$FromName = "Logs" ; name from who the email was sent
$FromAddress = "server@myserver.com" ; address from where the mail should come
$ToAddress = "tspitz@myemail.com" ; destination address of the email - REQUIRED
$Subject = "Daily Server Logs" ; subject from the email - can be anything you want it to be
$Body = "Warning and Error logs." ; the messagebody from the mail - can be left blank but then you get a blank mail
$AttachFiles = "C:UserstspitzDropboxCodingLogMailerlog.txt" ; the file(s) you want to attach seperated with a ; (Semicolon) - leave blank if not needed
$CcAddress = "" ; address for cc - leave blank if not needed
$BccAddress = "" ; address for bcc - leave blank if not needed
$Importance = "Normal" ; Send message priority: "High", "Normal", "Low"
$Username = "server@myserver.com" ; username for the account used from where the mail gets sent - REQUIRED
$Password = "mypassword" ; password for the account used from where the mail gets sent - REQUIRED
$IPPort = 25 ; port used for sending the mail
$ssl = 0 ; enables/disables secure socket layer sending - put to 1 if using httpS
;~ $IPPort=465 ; GMAIL port used for sending the mail
;~ $ssl=1 ; GMAILenables/disables secure socket layer sending - put to 1 if using httpS


Global $oMyRet[2]
Global $oMyError = ObjEvent("AutoIt.Error", "MyErrFunc")
$rc = _INetSmtpMailCom($SmtpServer, $FromName, $FromAddress, $ToAddress, $Subject, $Body, $AttachFiles, $CcAddress, $BccAddress, $Importance, $Username, $Password, $IPPort, $ssl)
If @error Then
MsgBox(0, "Error sending message", "Error code:" & @error & " Description:" & $rc)
EndIf
;
; The UDF
Func _INetSmtpMailCom($s_SmtpServer, $s_FromName, $s_FromAddress, $s_ToAddress, $s_Subject = "", $as_Body = "", $s_AttachFiles = "", $s_CcAddress = "", $s_BccAddress = "", $s_Importance="Normal", $s_Username = "", $s_Password = "", $IPPort = 25, $ssl = 0)
Local $objEmail = ObjCreate("CDO.Message")
$objEmail.From = '"' & $s_FromName & '" <' & $s_FromAddress & '>'
$objEmail.To = $s_ToAddress
Local $i_Error = 0
Local $i_Error_desciption = ""
If $s_CcAddress <> "" Then $objEmail.Cc = $s_CcAddress
If $s_BccAddress <> "" Then $objEmail.Bcc = $s_BccAddress
$objEmail.Subject = $s_Subject
If StringInStr($as_Body, "<") And StringInStr($as_Body, ">") Then
$objEmail.HTMLBody = $as_Body
Else
$objEmail.Textbody = $as_Body & @CRLF
EndIf
If $s_AttachFiles <> "" Then
Local $S_Files2Attach = StringSplit($s_AttachFiles, ";")
For $x = 1 To $S_Files2Attach[0]
$S_Files2Attach[$x] = _PathFull($S_Files2Attach[$x])
;~ ConsoleWrite('@@ Debug : $S_Files2Attach[$x] = ' & $S_Files2Attach[$x] & @LF & '>Error code: ' & @error & @LF) ;### Debug Console
If FileExists($S_Files2Attach[$x]) Then
ConsoleWrite('+> File attachment added: ' & $S_Files2Attach[$x] & @LF)
$objEmail.AddAttachment($S_Files2Attach[$x])
Else
ConsoleWrite('!> File not found to attach: ' & $S_Files2Attach[$x] & @LF)
SetError(1)
Return 0
EndIf
Next
EndIf
$objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendusing") = 2
$objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpserver") = $s_SmtpServer
If Number($IPPort) = 0 then $IPPort = 25
$objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpserverport") = $IPPort
;Authenticated SMTP
If $s_Username <> "" Then
$objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpauthenticate") = 1
$objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendusername") = $s_Username
$objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendpassword") = $s_Password
EndIf
If $ssl Then
$objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpusessl") = True
EndIf
;Update settings
$objEmail.Configuration.Fields.Update
; Set Email Importance
Switch $s_Importance
Case "High"
$objEmail.Fields.Item ("urn:schemas:mailheader:Importance") = "High"
Case "Normal"
$objEmail.Fields.Item ("urn:schemas:mailheader:Importance") = "Normal"
Case "Low"
$objEmail.Fields.Item ("urn:schemas:mailheader:Importance") = "Low"
EndSwitch
$objEmail.Fields.Update
; Sent the Message
$objEmail.Send
If @error Then
SetError(2)
Return $oMyRet[1]
EndIf
$objEmail=""
EndFunc ;==>_INetSmtpMailCom
;
;
; Com Error Handler
Func MyErrFunc()
$HexNumber = Hex($oMyError.number, 8)
$oMyRet[0] = $HexNumber
$oMyRet[1] = StringStripWS($oMyError.description, 3)
ConsoleWrite("### COM Error ! Number: " & $HexNumber & " ScriptLine: " & $oMyError.scriptline & " Description:" & $oMyRet[1] & @LF)
SetError(1); something to check for when this function returns
Return
EndFunc ;==>MyErrFunc

Thanks

Link to comment
Share on other sites

What's not working? "Not working" should be outlawed.

If I posted any code, assume that code was written using the latest release version unless stated otherwise. Also, if it doesn't work on XP I can't help with that because I don't have access to XP, and I'm not going to.
Give a programmer the correct code and he can do his work for a day. Teach a programmer to debug and he can do his work for a lifetime - by Chirag Gude
How to ask questions the smart way!

I hereby grant any person the right to use any code I post, that I am the original author of, on the autoitscript.com forums, unless I've specifically stated otherwise in the code or the thread post. If you do use my code all I ask, as a courtesy, is to make note of where you got it from.

Back up and restore Windows user files _Array.au3 - Modified array functions that include support for 2D arrays.  -  ColorChooser - An add-on for SciTE that pops up a color dialog so you can select and paste a color code into a script.  -  Customizable Splashscreen GUI w/Progress Bar - Create a custom "splash screen" GUI with a progress bar and custom label.  -  _FileGetProperty - Retrieve the properties of a file  -  SciTE Toolbar - A toolbar demo for use with the SciTE editor  -  GUIRegisterMsg demo - Demo script to show how to use the Windows messages to interact with controls and your GUI.  -   Latin Square password generator

Link to comment
Share on other sites

I would move the files in question to a non-protected area of the hard drive and try it again. It's quite possible that it's a permissions issue when running it as a task, especially if it's being run on a server or Windows Vista/7.

If I posted any code, assume that code was written using the latest release version unless stated otherwise. Also, if it doesn't work on XP I can't help with that because I don't have access to XP, and I'm not going to.
Give a programmer the correct code and he can do his work for a day. Teach a programmer to debug and he can do his work for a lifetime - by Chirag Gude
How to ask questions the smart way!

I hereby grant any person the right to use any code I post, that I am the original author of, on the autoitscript.com forums, unless I've specifically stated otherwise in the code or the thread post. If you do use my code all I ask, as a courtesy, is to make note of where you got it from.

Back up and restore Windows user files _Array.au3 - Modified array functions that include support for 2D arrays.  -  ColorChooser - An add-on for SciTE that pops up a color dialog so you can select and paste a color code into a script.  -  Customizable Splashscreen GUI w/Progress Bar - Create a custom "splash screen" GUI with a progress bar and custom label.  -  _FileGetProperty - Retrieve the properties of a file  -  SciTE Toolbar - A toolbar demo for use with the SciTE editor  -  GUIRegisterMsg demo - Demo script to show how to use the Windows messages to interact with controls and your GUI.  -   Latin Square password generator

Link to comment
Share on other sites

I would move the files in question to a non-protected area of the hard drive and try it again. It's quite possible that it's a permissions issue when running it as a task, especially if it's being run on a server or Windows Vista/7.

Can you please expand on

non-protected area of the hard drive

Thanks

Link to comment
Share on other sites

Some place that doesn't require authentication to access, like a folder off of the C: root folder, but not in Program Files.

If I posted any code, assume that code was written using the latest release version unless stated otherwise. Also, if it doesn't work on XP I can't help with that because I don't have access to XP, and I'm not going to.
Give a programmer the correct code and he can do his work for a day. Teach a programmer to debug and he can do his work for a lifetime - by Chirag Gude
How to ask questions the smart way!

I hereby grant any person the right to use any code I post, that I am the original author of, on the autoitscript.com forums, unless I've specifically stated otherwise in the code or the thread post. If you do use my code all I ask, as a courtesy, is to make note of where you got it from.

Back up and restore Windows user files _Array.au3 - Modified array functions that include support for 2D arrays.  -  ColorChooser - An add-on for SciTE that pops up a color dialog so you can select and paste a color code into a script.  -  Customizable Splashscreen GUI w/Progress Bar - Create a custom "splash screen" GUI with a progress bar and custom label.  -  _FileGetProperty - Retrieve the properties of a file  -  SciTE Toolbar - A toolbar demo for use with the SciTE editor  -  GUIRegisterMsg demo - Demo script to show how to use the Windows messages to interact with controls and your GUI.  -   Latin Square password generator

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...