Jump to content
  1. TheDcoder

    TheDcoder

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By mLipok
      This UDF was created for give any/some kind of support for GDPR solutions in AutoIt.
      This is a modest attempt at implementation.
       
      More details in support topic:
       
    • By mLipok
      This UDF was created for give any kind of support for GDPR solutions in AutoIt.
       
      #include "GDPR.au3" #AutoIt3Wrapper_Run_AU3Check=Y #AutoIt3Wrapper_Au3Check_Parameters=-d -w 1 -w 2 -w 3 -w 4 -w 5 -w 6 -w 7 #Tidy_Parameters=/sort_funcs /reel ; #AutoIt3Wrapper_Run_Debug_Mode=Y _Example() Func _Example() _GDPR_Crypter_Wrapper(_Example_Crypter) Local $sText = 'AutoIt v3 is a freeware BASIC-like scripting language designed for automating the Windows GUI and general scripting.' MsgBox(0, @ScriptLineNumber, _GDPR_Anonymize_String($sText)) Local $dCrypted = _GDPR_Crypt_String($sText) MsgBox(0, @ScriptLineNumber, $dCrypted & @CRLF & @error & @CRLF & @extended) Local $sDecrypted = _GDPR_DeCrypt_AsString($dCrypted) MsgBox(0, @ScriptLineNumber, $sDecrypted & @CRLF & @error & @CRLF & @extended) _GDPR_Crypt_File(@ScriptFullPath, @ScriptFullPath & '.CRYPTED') If @error Then ConsoleWrite('! ---> @error=' & @error & ' @extended=' & @extended & ' : _GDPR_Crypt_File' & @CRLF) _GDPR_DeCrypt_File(@ScriptFullPath & '.CRYPTED', @ScriptFullPath & '.DECRYPTED.au3') If @error Then ConsoleWrite('! ---> @error=' & @error & ' @extended=' & @extended & ' : _GDPR_DeCrypt_File' & @CRLF) EndFunc ;==>_Example Func _Example_Crypter($dBinaryData, $bDataAlreadyEncrypted) _Crypt_Startup() ; Start the Crypt library. Local $dResult If $bDataAlreadyEncrypted Then $dResult = _Crypt_DecryptData($dBinaryData, 'securepassword', $CALG_3DES) ; Decrypt the data using the generic password string. The return value is a binary string. Else $dResult = _Crypt_EncryptData($dBinaryData, 'securepassword', $CALG_3DES) ; Encrypt the text with the new cryptographic key. EndIf _Crypt_Shutdown() ; Shutdown the Crypt library. Return $dResult EndFunc ;==>_Example_Crypter  
      Download link:
       
      WIKI:
      This UDF was added here:  https://www.autoitscript.com/wiki/User_Defined_Functions
       
       
    • By mLipok
      This UDF was created to facilitate the saving and reading of email configuration.
      Thanks to @water, @jchd, @Jos for helping in translation of _EmailConfig_GUI_Preset_**()
      Hope to have _EmailConfig_GUI_Preset_ES() version soon.

      If you want to create your national version of _EmailConfig_GUI_Preset_**() please do not hesitate ... contribute.
      _EmailConfig_GUI_Preset_EN() is translated by me and Google Translator (from my national Polish language), so if you have any fix for this please do not hesitate ... contribute.
       
      The EmailConfig_Example_STMP_Mailer.au3   is using modified version of Jos SMTP Mailer UDF
       
      #AutoIt3Wrapper_UseX64=N #AutoIt3Wrapper_Run_AU3Check=Y #AutoIt3Wrapper_Au3Check_Parameters=-d -w 1 -w 2 -w 3 -w 4 -w 5 -w 6 -w 7 #Tidy_Parameters=/sort_funcs /reel #include <Array.au3> #include <AutoItConstants.au3> #include <ButtonConstants.au3> #include <ComboConstants.au3> #include <Crypt.au3> #include <EditConstants.au3> #include <File.au3> #include <GUIConstantsEx.au3> #include <StaticConstants.au3> #include <WindowsConstants.au3> #include "EmailConfig.au3" #include "GDPR.au3" ; https://www.autoitscript.com/forum/files/file/509-gdpr/ Global $oMyRet[2] #Region - EXAMPLE _MY_EXAMPLE__EmailConfig() Func _MY_EXAMPLE__EmailConfig() _GDPR_Crypter_Wrapper(_EmailConfig_ExampleCrypter) _EmailConfig_GUI_Preset_EN() ;~ _EmailConfig_GUI_Preset_DE() ;~ _EmailConfig_GUI_Preset_FR() ;~ _EmailConfig_GUI_Preset_NL() ;~ _EmailConfig_GUI_Preset_PL() _EmailConfig_SaveWrapper(_EmailConfig_SaveToINI) _EmailConfig_LoadWrapper(_EmailConfig_LoadFromINI) _EmailConfig_LoadWrapper() If $IDYES = MsgBox($MB_YESNO + $MB_TOPMOST + $MB_ICONQUESTION + $MB_DEFBUTTON1, 'Question #' & @ScriptLineNumber, _ 'Do you want to set email configuration ?') Then _EmailConfig_ShowGUI() EndIf Local $s_ToAddress = 'whereisyourdestination@your.email.com' Local $s_Subject = 'Testing email sending : ' & @YEAR & @MON & @MDAY & ' ' & @HOUR & @MIN & @SEC Local $s_Body = 'This is only a test' Local $s_Attachments = '' _SMTP_SendEmail_Example($s_ToAddress, $s_Subject, $s_Body, $s_Attachments) EndFunc ;==>_MY_EXAMPLE__EmailConfig Func _EmailConfig_ExampleCrypter($dBinaryData, $bDataAlreadyEncrypted) _Crypt_Startup() ; Start the Crypt library. Local $dResult If $bDataAlreadyEncrypted Then $dResult = _Crypt_DecryptData($dBinaryData, 'securepassword', $CALG_AES_256) ; Decrypt the data using the generic password string. The return value is a binary string. Else $dResult = _Crypt_EncryptData($dBinaryData, 'securepassword', $CALG_AES_256) ; Encrypt the text with the new cryptographic key. EndIf _Crypt_Shutdown() ; Shutdown the Crypt library. Return $dResult EndFunc ;==>_EmailConfig_ExampleCrypter #EndRegion - EXAMPLE ; ; The UDF Func _INetSmtpMailCom($s_SmtpServer, $s_FromName, $s_FromAddress, $s_ToAddress, $s_Subject = "", $as_Body = "", $s_AttachFiles = "", $s_CcAddress = "", $s_BccAddress = "", $s_Importance = "Normal", $s_Username = "", $s_Password = "", $IPPort = 25, $ssl = 0, $tls = 0) Local $oCOM_Error_Handler = ObjEvent("AutoIt.Error", "MyErrFunc") #forceref $oCOM_Error_Handler Local $objEmail = ObjCreate("CDO.Message") $objEmail.From = '"' & $s_FromName & '" <' & $s_FromAddress & '>' $objEmail.To = $s_ToAddress Local $i_Error = 0 #forceref $i_Error Local $i_Error_desciption = "" #forceref $i_Error_desciption If $s_CcAddress <> "" Then $objEmail.Cc = $s_CcAddress If $s_BccAddress <> "" Then $objEmail.Bcc = $s_BccAddress $objEmail.Subject = $s_Subject If StringInStr($as_Body, "<") And StringInStr($as_Body, ">") Then $objEmail.HTMLBody = $as_Body Else $objEmail.Textbody = $as_Body & @CRLF EndIf If $s_AttachFiles <> "" Then Local $S_Files2Attach = StringSplit($s_AttachFiles, ";") For $x = 1 To $S_Files2Attach[0] $S_Files2Attach[$x] = _PathFull($S_Files2Attach[$x]) ;~ ConsoleWrite('@@ Debug : $S_Files2Attach[$x] = ' & $S_Files2Attach[$x] & @LF & '>Error code: ' & @error & @LF) ;### Debug Console If FileExists($S_Files2Attach[$x]) Then ConsoleWrite('+> File attachment added: ' & $S_Files2Attach[$x] & @LF) $objEmail.AddAttachment($S_Files2Attach[$x]) Else ConsoleWrite('!> File not found to attach: ' & $S_Files2Attach[$x] & @LF) SetError(1) Return 0 EndIf Next EndIf $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendusing") = 2 $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpserver") = $s_SmtpServer If Number($IPPort) = 0 Then $IPPort = 25 $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpserverport") = $IPPort ; Authenticated SMTP If $s_Username <> "" Then $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpauthenticate") = 1 $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendusername") = $s_Username $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendpassword") = $s_Password EndIf ; Set security params If $ssl Then $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpusessl") = True If $tls Then $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendtls") = True ; Update settings $objEmail.Configuration.Fields.Update ; Set Email Importance Switch $s_Importance Case "High" $objEmail.Fields.Item("urn:schemas:mailheader:Importance") = "High" Case "Normal" $objEmail.Fields.Item("urn:schemas:mailheader:Importance") = "Normal" Case "Low" $objEmail.Fields.Item("urn:schemas:mailheader:Importance") = "Low" EndSwitch $objEmail.Fields.Update ; Sent the Message $objEmail.Send If @error Then SetError(2) Return $oMyRet[1] EndIf $objEmail = "" EndFunc ;==>_INetSmtpMailCom Func _SMTP_SendEmail_Example($s_ToAddress, $s_Subject, $s_Body, $s_Attachments) #Tidy_ILC_Pos=120 Local $aEMAIL_CONFIG = __EmailConfig__API() Local $SmtpServer = $aEMAIL_CONFIG[$EMAIL_CONFIG__22__SMTP_SERVER_NAME][$EMAIL_CONFIG__COL3_SAVELOAD_VALUE] ; address for the smtp-server to use - REQUIRED Local $FromName = $aEMAIL_CONFIG[$EMAIL_CONFIG__02__COMMON_NAME][$EMAIL_CONFIG__COL3_SAVELOAD_VALUE] ; name from who the email was sent Local $FromAddress = $aEMAIL_CONFIG[$EMAIL_CONFIG__03__EMAIL_ADDRESS][$EMAIL_CONFIG__COL3_SAVELOAD_VALUE] ; address from where the mail should come Local $ToAddress = $s_ToAddress ; destination address of the email - REQUIRED Local $Subject = $s_Subject ; subject from the email - can be anything you want it to be Local $Body = $s_Body ; the messagebody from the mail - can be left blank but then you get a blank mail Local $AttachFiles = $s_Attachments ; the file(s) you want to attach seperated with a ; (Semicolon) - leave blank if not needed Local $CcAddress = "" ; address for cc - leave blank if not needed Local $BccAddress = "" ; address for bcc - leave blank if not needed Local $Importance = "Normal" ; Send message priority: "High", "Normal", "Low" Local $Username = $aEMAIL_CONFIG[$EMAIL_CONFIG__20__SMTP_USER_NAME][$EMAIL_CONFIG__COL3_SAVELOAD_VALUE] ; username for the account used from where the mail gets sent - REQUIRED Local $Password = $aEMAIL_CONFIG[$EMAIL_CONFIG__21__SMTP_PASSWORD][$EMAIL_CONFIG__COL3_SAVELOAD_VALUE] ; password for the account used from where the mail gets sent - REQUIRED Local $IPPort = $aEMAIL_CONFIG[$EMAIL_CONFIG__23__SMTP_PORT_NUMBER][$EMAIL_CONFIG__COL3_SAVELOAD_VALUE] ; port used for sending the mail ; in many country port 25 is not recomended, in such case use 587 instead Local $ssl = 0 ; enables/disables secure socket layer sending - put to 1 if using httpS Local $tls = 0 ; enables/disables TLS when required ;~ Local $IPPort = 465 ; GMAIL port used for sending the mail ;~ Local $ssl = 1 ; GMAIL enables/disables secure socket layer sending - put to 1 if using httpS Local $rc = _INetSmtpMailCom($SmtpServer, $FromName, $FromAddress, $ToAddress, $Subject, $Body, $AttachFiles, $CcAddress, $BccAddress, $Importance, $Username, $Password, $IPPort, $ssl, $tls) If @error Then MsgBox(0, "Error sending email", "Error code: " & @error & @CRLF & "Description: " & $rc) EndIf EndFunc ;==>_SMTP_SendEmail_Example ; ; ; Com Error Handler Func MyErrFunc(ByRef $oMyError) Local $HexNumber = Hex($oMyError.number, 8) $oMyRet[0] = $HexNumber $oMyRet[1] = StringStripWS($oMyError.description, 3) ConsoleWrite("### COM Error ! Number: " & $HexNumber & " ScriptLine: " & $oMyError.scriptline & " Description:" & $oMyRet[1] & @LF) SetError(1) ; something to check for when this function returns Return EndFunc ;==>MyErrFunc  

       
      EmailConfig.au3 EmailConfig_Example_STMP_Mailer.au3
    • By RTFC
      CodeCrypter enables you to encrypt scripts without placing the key inside the script.
      This is because this key is extracted from the user environment at runtime by, for example:
      password user query any macro (e.g., @username) any AutoIt function call any UDF call some permanent environment variable on a specific machine (and not created by your script) a server response a device response anything else you can think of, as long as it's not stored in the script any combination of the above You need several scripts to get this to work, and they are scattered over several threads, so here's a single bundle that contains them all (including a patched version of Ward's AES.au3; with many thanks to Ward for allowing me to include this script here):
      Latest version: 3.3c (21 Aug 2020): please follow this link.
      Note: if you experience issues under Win8/8.1 (as some users have reported), please upgrade to Win10 (or use Win7) if you can; as far as I can tell, the scripts in the bundle all work under Win7 & Win10 (and XP). Moreover, I have no access to a Win8 box, so these issues will not be fixed, at least not by yours truly.
       
      How the bits and pieces fit together:
      CodeCrypter is a front-end for the MCF UDF library (you need version 1.3 or later). Its thread is here:
      '?do=embed' frameborder='0' data-embedContent>>
      The MCF package (also contained in the CodeScannerCrypter bundle) contains MCF.au3 (the library itself) plus a little include file called MCFinclude.au3. The latter you have to include in any script you wish to encrypt. Any code preceding it will not be encrypted, any code following it will be encrypted. You define the dynamic key inside MCFinclude.au3, in the UDF: _MCFCC_Init().
      From the same post you can download an MCF Tutorial which I heartily recommend, because encrypting a script requires a number of steps in the right order, namely:
      In MCFinclude.au3, define and/or choose your dynamic key(s) (skip this step = use default setting) include MCFinclude.au3 in your target script Run CodeScanner (version 2.3+) on your target script, with setting WriteMetaCode=True (see '?do=embed' frameborder='0' data-embedContent>>), then close CodeScanner. Start CodeCrypter press the Source button to load your target file enable Write MCF0 (tick the first option in Main Settings) Enable "Encrypt" (last option in the Main Settings) Go to the Tab Encrypt and set up the encryption the way you want (skip this = use default settings) Return to Main Tab and press "Run" if all goes well, a new script called MCF0test.au3 is created in the same directory as your target. It has no includes and no redundant parts. Please check that it works as normal. (see Remarks if not) It all sounds far more complicated than it is, really.
      Not convinced? Check out:
      a simple HowTo Guide: HowToCodeCrypt.pdf an updated and extended Q & A pdf (FAQ, also included in the bundle) to help you get started:CodeCrypterFAQ.pdf For additional explanations/examples in response to specific questions by forum members (how it works, what it can/cannot do), see elsewhere in this thread, notably:
      Simple analogy of how it works: post #53, second part General Explanation and HowTo: post #9, 51, 75, 185/187, 196, 207, 270, 280 (this gets a bit repetitive) BackTranslation: post #179 Obfuscation: post #36 (general), 49 (selective obfuscation) Specific features and fixes: post #3 (security), 84 (redefining the expected runtime response), 169 (Curl Enum fix), 185/187 (using license keys), 194 (replacing Ward's AES UDF with different encryption/decryption calls), 251 (AV detection issue), 262 (extract key contents to USB on different target machine prior to encryption) Limitations: post #26 (@error/@extended), 149 (FileInstall), 191 (AES.au3 on x64) Not recommended: post #46/249 (static encryption), 102 (programme logic error), 237 (parsing password via cmdline)  
      Technical notes:
      BackTranslation is a test to check that the MetaCode translation worked. Skip it at your peril. It also turns your multi-include composite script into a single portable file without redundant parts (you can opt to leave the redundant parts in, if you want).
      CodeCrypter can also obfuscate (vars and UDF names) and replace strings, variable names and UDF names with anything else you provide, for  example, for language translation). After CodeScanner separates your target's structure from its contents, CodeCrypter (actually MCF, under the hood) can change any part, and then generate a new script from whichever pieces you define. See the MCF Tutorial for more explanation and examples.
      Encryption currently relies on Ward's excellent AES UDF and TheXman's sophisticated CryptoNG bundle. You can replace these with any other algorithm you like (but this is not trivial to do: edit MCFinclude.au3 UDF _MCFCC(), and MCF.au3 UDF _EncryptEntry(), see post #194 in this thread). AES by Ward, and CryptoNG by TheXman are also included in the bundle (with many thanks to Ward and TheXman for graciously allowing me to republish their outstanding work).
      Going to lie down now...
      RT
       
    • By pat4005
      A tiny UDF that can shoot magic packets at your computers to wake them the heck up. All credits to Olish.
      The only parameter it needs to be specified – is your machine's MAC-address (ip address (the second parameter), at which you will be sending magic packet is generating automatically from @IPAddress1 macro)
      Example:
      _WoL_WakeDevice('001CC0CAED7A') ; the second parameter (if necessery) must be a broadcast address of your local network segment (i.e. 192.168.0.255 for a network 192.168.0.0)  
      _WakeOnLan.au3
×
×
  • Create New...