I have a very strange problem concerning MouseClick function.
I need to start Control Panel, navigate it on the Display Section (Adjust screen resolution link), click on it, and from the next Dialog choose Intel Graphic tool tab and navigate into it when it opens.
I wasn't using MouseClick() at first when I tried to use Control IDs, but I was fed up with the Autoit Window Info poor and inaccurate info (It flickers and the moment I click on the control the control ID and class disappear) so I ended up choosing the easiest way.
The code I'm posting worked OK until two weeks ago, the mouse clicks were accurately performed and the Script reached the end with no errors...and I was happy.
All of a sudden, between one try and the other, I noticed the cursor not flying exactly where it was supposed to, namely to the Control Panel ->Display->Adjust screen resolution link but it clicked some 30 pixels below and some 30 pixels to the left, choosing obviously and undesired function and from that point it screwed the whole thing up. And from that moment onward, it seems I can no longer regain the mouse to click on that sequence.
Could it be because my Control Panel ->Display form moved slightly from one test to another and therefore I got that small offside?
If you believe this is the reason, I should then re position the Control Panel ->Display window to 0,0 and recalculate all the clicks.
do you have a suggestion?
Thanks a lot
I need to open an INTEL Graphic Tool clicking on a Win7 Tray Icon. This icon is not shown on the Win7 Tray but it is shown once you click on a button that shows a little arrow-up. This button opens up an extension of the tray and there is my INTEL Graphic Tool Icon.
The first ControlClick('[Class:Shell_TrayWnd]', '', 1502 ) at line 26 of my source code (Rotatedisplays.au3) works fine as it clicks on the up-arrow shown on the uparrowfirst Menu.jpg picture and opens up an extension of the tray. Then I'm trying to click on the INTEL Graphic Tool Icon which is the first blue icon (up-left) of the tray extension but I failed all my attempts. Can somebody help me out?
Been looking for and playing around with a script that would prompt me for a UserName and Password then Map a network drive.
I have included the code:
#AutoIt3Wrapper_icon=your_icon.ico #AutoIt3Wrapper_Run_Obfuscator=y #obfuscator_parameters=/striponly #NoTrayIcon #include <ButtonConstants.au3> #include <EditConstants.au3> #include <GUIConstantsEx.au3> #include <StaticConstants.au3> #include <WindowsConstants.au3> $Form1 = GUICreate("Connect To Your Drive", 265, 135) $username_id = GUICtrlCreateInput("", 88, 16, 153, 21) $password_id = GUICtrlCreateInput("", 87, 44, 153, 21, $ES_PASSWORD) GUICtrlCreateLabel("&Username", 24, 16, 52, 17) GUICtrlCreateLabel("&Password", 26, 46, 50, 17) $connect = GUICtrlCreateButton("&Connect", 24, 80, 217, 33, BitOr($GUI_SS_DEFAULT_BUTTON, $BS_DEFPUSHBUTTON)) GUISetState(@SW_SHOW) While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE Exit Case $connect $username = GUICtrlRead($username_id) $password = GUICtrlRead($password_id) If $username = '' Or $password = '' Then MsgBox(16, 'Error', 'Empty username or password') ContinueLoop EndIf If DriveMapGet("X:") <> '' Then ; very fast MsgBox(16, 'Error', 'The device is already assigned') ContinueLoop EndIf GUISetCursor(15,1) DriveMapAdd("X:", "\\Server\share\filestore\" & $username, 0, $username, $password) ; slow If @error Then Switch @error Case 1 $err_message = 'Undefined / Other error. Windows API return code: ' & @extended Case 2 $err_message = 'Access to the remote share was denied' Case 3 $err_message = 'The device is already assigned' Case 4 $err_message = 'Invalid device name' Case 5 $err_message = 'Invalid remote share' Case 6 $err_message = 'Invalid password' EndSwitch GUISetCursor(2) MsgBox(16, 'Error', $err_message) Else ; everything OK Exit EndIf EndSwitch WEnd
When I attempt the build I get the following:
Obfuscator support has been discontinued and is replaced by Au3Stripper using "#Au3Stripper_" directives.
! The directive to run Au3Stripper is: #AutoIt3Wrapper_Run_Au3Stripper=y ; Default is n
! #Au3Stripper_Parameters options are:
/pe : Replace and reference to a Global Const variable with its actual value.
/tl : Create Au3Stripper.Log with a trace of all actions.
/debug: add Debug information to Au3Stripper.Log.
/so : This is the default when no parameters are provided. same as /sf + /sv
/sf : Strip all unused Func's
/sv : Strip all unused Global var records.
/mo : Just merges the Include files into the source and strips the Comments.
This is similar to aut2exe and helps finding the errorline.
/mi : Sets the maximum Iterations Au3Stripper will perform. Default is 5.
/rm : Rename Variables and Functions to a shorter name.
/rsln: Replace @ScriptLineNumber with the actual line number.
/Beta: Use Beta Includes.
- Icon not found: your_icon.ico ==> Changing to default ICON.
>Running AU3Check (18.104.22.168) from:C:\Program Files (x86)\AutoIt3 input:C:\Users\Migue\Documents\Sync\Batches and Scripts\WDW-Scripts\SMS.au3
+>18:28:11 AU3Check ended.rc:0
>Running Au3Stripper (18.708.1148.0) from:C:\Program Files (x86)\AutoIt3\SciTE\Au3Stripper cmdline:
- 0.22 Iteration 1 Strip Functions result: Output 1050 lines, stripped 0 Func lines and 234 Commentlines
- 0.61 Iteration 2 Strip Variables result: Output 88 lines and stripped 962 lines
- 0.63 Iteration 3 Strip Variables result: Output 58 lines and stripped 30 lines
- 0.64 Iteration 4 Strip Variables result: Output 52 lines and stripped 6 lines
- 0.66 Iteration 5 Strip Variables result: Output 51 lines and stripped 1 lines
+> Source 1285 lines 48435 Characters.
+> Stripped 999 Func/Var lines and 234 comment lines, Total 46893 Characters.
+> Saved 95% lines 96% Characters.
+> Au3Stripper v18.708.1148.0 finished created:C:\Users\Migue\Documents\Sync\Batches and Scripts\WDW-Scripts\SMS_stripped.au3
+>18:28:12 Au3Stripper ended.rc:0
>Running AU3Check (22.214.171.124) from:C:\Program Files (x86)\AutoIt3 input:C:\Users\Migue\Documents\Sync\Batches and Scripts\WDW-Scripts\SMS_stripped.au3
+>18:28:12 AU3Check ended.rc:0
>Running:(126.96.36.199):C:\Program Files (x86)\AutoIt3\aut2exe\aut2exe.exe /in "C:\Users\Migue\Documents\Sync\Batches and Scripts\WDW-Scripts\SMS_stripped.au3" /out "C:\Users\Migue\AppData\Local\AutoIt v3\Aut2exe\~AU495C.tmp.exe" /nopack /comp 2
+>18:28:13 Aut2exe.exe ended.C:\Users\Migue\AppData\Local\AutoIt v3\Aut2exe\~AU495C.tmp.exe. rc:0
!>18:28:13 Problem copying file from: C:\Users\Migue\AppData\Local\AutoIt v3\Aut2exe\~AU495C.tmp.exe To :C:\Users\Migue\Documents\Sync\Batches and Scripts\WDW-Scripts\SMS.exe
+>18:28:14 AutoIt3Wrapper Finished.
>Exit code: 0 Time: 3.046
When I attempt to run the executable I get the following:
Many thanks in advance
Hi folks, I'm having problems with a screenshot capture script.
Let me explain.
Everyday I (and my colleagues at work) need to take some screenshots from a web-page. These screenshots are used to compile a report. Normally, I (and others) used to log in into the website and took screenshots of desired graphics and tables. This is tediuos and time consuming. To easy this task I made a script using autoit that basically logs into the website (user and password) and using some clicks, stroke send, coordinates, it is able to generate the graphics and save them to some folders into our network (this script saves arouund 50 pics. It works like a sharm.
In order to make things easier, I tried to schedule this script (compiled to a Screnpics.exe file) using task scheduler from windows. We already use this (task scheduler) to run some vbs scripts, some vba excel scripts and so on. The computer used for this tasks is a windows 7 desktop computer. Due to security policies, the computer locks after some time. All this tasks run in the locked computer.
My script screenpics.exe runs also from this locked computer. When the computer is unlocked, it does everything as expected. But, when it is locked, all the "pics" are BLACK. As I understand, it runs ok, but, as the "windows" are innactive, it prints what it "sees": a black rectangular.
Some details: The web-page with hold the information I need, it only works in Firefox and, because of this it couldn`t be managed by vba or some "getobject" like commands. In fact, it has some flash things that make it impossible to control programatically. So my script is based on mouse move to coordinates, mouse click, screen capture and so one.
So, I read many posts trying to figure out a way to overcome this, but... nothing came to mind. My first idea was try to unlock windows. Theses lead me to some posts with no solution. This is worse because I'm not a computer admin, so procedures that need to replace/change the register are not an option.
If someone has any idea, I'll be gratefull.
Has anybody else noticed that Windows 7 reacts ignorantly when you use the Windows key + arrow key shortcuts on a GUI with GUIEventMode set to 1? I discovered this recently when I was working on an app where I wanted complete control over the maximize/minimize buttons.
Just give it a spin:
#include <GUIConstants.au3> Opt('GUIEventOptions', 1) $hGUI = GUICreate('', 300, 200, Default, Default, BitOR($GUI_SS_DEFAULT_GUI, $WS_MAXIMIZEBOX)) GUISetState() While 1 Switch GUIGetMsg() Case $GUI_EVENT_MAXIMIZE ToolTip('Maximized') Case $GUI_EVENT_MINIMIZE ToolTip('Minimized') Case $GUI_EVENT_RESTORE ToolTip('Restored') Case $GUI_EVENT_CLOSE Exit EndSwitch WEnd Run that, then hit Win+Up or Win+Down. None of those events get triggered, and it still maximizes/minimizes. Although I can't get it to restore down from a maximize unless the window is also resizable ($WS_THICKFRAME in the style).
Is there a way to stop Windows from doing what it wants or is the only option to check with WinGetState() and then change it back?
Windows 10 seems to respect my settings, and I don't have any other versions to test on.