Jump to content

Drag a control.


PlayHD
 Share

Recommended Posts

Something like this >>

#include <GUIConstantsEx.au3>
#include <WindowsConstants.au3>

Example()

Func Example()
    Local $hGUI = GUICreate('_ControlMove()', 300, 200)
    Local $iLabel = GUICtrlCreateLabel('Move It', 100, 50, 60, 20)
    GUICtrlSetBkColor(-1, 0x00FF00)
    GUISetState(@SW_SHOW, $hGUI)

    While 1
        Switch GUIGetMsg()
            Case $GUI_EVENT_CLOSE
                Exit

            Case $GUI_EVENT_PRIMARYDOWN
                _ControlMove($iLabel)

        EndSwitch
    WEnd
EndFunc   ;==>Example

Func _ControlMove($iControlID) ; By Melba23
    Local Const $SC_MOVE = 0xF010
    Local $aReturn = GUIGetCursorInfo()
    If @error Then
        Return 0
    EndIf
    If $aReturn[4] = $iControlID Then
        GUICtrlSendMsg($iControlID, $WM_SYSCOMMAND, BitOR($SC_MOVE, $HTCAPTION), 0)
    EndIf
EndFunc   ;==>_ControlMove

UDF List:

 
_AdapterConnections()_AlwaysRun()_AppMon()_AppMonEx()_ArrayFilter/_ArrayReduce_BinaryBin()_CheckMsgBox()_CmdLineRaw()_ContextMenu()_ConvertLHWebColor()/_ConvertSHWebColor()_DesktopDimensions()_DisplayPassword()_DotNet_Load()/_DotNet_Unload()_Fibonacci()_FileCompare()_FileCompareContents()_FileNameByHandle()_FilePrefix/SRE()_FindInFile()_GetBackgroundColor()/_SetBackgroundColor()_GetConrolID()_GetCtrlClass()_GetDirectoryFormat()_GetDriveMediaType()_GetFilename()/_GetFilenameExt()_GetHardwareID()_GetIP()_GetIP_Country()_GetOSLanguage()_GetSavedSource()_GetStringSize()_GetSystemPaths()_GetURLImage()_GIFImage()_GoogleWeather()_GUICtrlCreateGroup()_GUICtrlListBox_CreateArray()_GUICtrlListView_CreateArray()_GUICtrlListView_SaveCSV()_GUICtrlListView_SaveHTML()_GUICtrlListView_SaveTxt()_GUICtrlListView_SaveXML()_GUICtrlMenu_Recent()_GUICtrlMenu_SetItemImage()_GUICtrlTreeView_CreateArray()_GUIDisable()_GUIImageList_SetIconFromHandle()_GUIRegisterMsg()_GUISetIcon()_Icon_Clear()/_Icon_Set()_IdleTime()_InetGet()_InetGetGUI()_InetGetProgress()_IPDetails()_IsFileOlder()_IsGUID()_IsHex()_IsPalindrome()_IsRegKey()_IsStringRegExp()_IsSystemDrive()_IsUPX()_IsValidType()_IsWebColor()_Language()_Log()_MicrosoftInternetConnectivity()_MSDNDataType()_PathFull/GetRelative/Split()_PathSplitEx()_PrintFromArray()_ProgressSetMarquee()_ReDim()_RockPaperScissors()/_RockPaperScissorsLizardSpock()_ScrollingCredits_SelfDelete()_SelfRename()_SelfUpdate()_SendTo()_ShellAll()_ShellFile()_ShellFolder()_SingletonHWID()_SingletonPID()_Startup()_StringCompact()_StringIsValid()_StringRegExpMetaCharacters()_StringReplaceWholeWord()_StringStripChars()_Temperature()_TrialPeriod()_UKToUSDate()/_USToUKDate()_WinAPI_Create_CTL_CODE()_WinAPI_CreateGUID()_WMIDateStringToDate()/_DateToWMIDateString()Au3 script parsingAutoIt SearchAutoIt3 PortableAutoIt3WrapperToPragmaAutoItWinGetTitle()/AutoItWinSetTitle()CodingDirToHTML5FileInstallrFileReadLastChars()GeoIP databaseGUI - Only Close ButtonGUI ExamplesGUICtrlDeleteImage()GUICtrlGetBkColor()GUICtrlGetStyle()GUIEventsGUIGetBkColor()Int_Parse() & Int_TryParse()IsISBN()LockFile()Mapping CtrlIDsOOP in AutoItParseHeadersToSciTE()PasswordValidPasteBinPosts Per DayPreExpandProtect GlobalsQueue()Resource UpdateResourcesExSciTE JumpSettings INISHELLHOOKShunting-YardSignature CreatorStack()Stopwatch()StringAddLF()/StringStripLF()StringEOLToCRLF()VSCROLLWM_COPYDATAMore Examples...

Updated: 22/04/2018

Link to comment
Share on other sites

Something like this >>

#include <GUIConstantsEx.au3>
#include <WindowsConstants.au3>

Example()

Func Example()
    Local $hGUI = GUICreate('_ControlMove()', 300, 200)
    Local $iLabel = GUICtrlCreateLabel('Move It', 100, 50, 60, 20)
    GUICtrlSetBkColor(-1, 0x00FF00)
    GUISetState(@SW_SHOW, $hGUI)

    While 1
        Switch GUIGetMsg()
            Case $GUI_EVENT_CLOSE
                Exit

            Case $GUI_EVENT_PRIMARYDOWN
                _ControlMove($iLabel)

        EndSwitch
    WEnd
EndFunc ;==>Example

Func _ControlMove($iControlID) ; By Melba23
    Local Const $SC_MOVE = 0xF010
    Local $aReturn = GUIGetCursorInfo()
    If @error Then
        Return 0
    EndIf
    If $aReturn[4] = $iControlID Then
        GUICtrlSendMsg($iControlID, $WM_SYSCOMMAND, BitOR($SC_MOVE, $HTCAPTION), 0)
    EndIf
EndFunc ;==>_ControlMove

Yes its work fine, but with a button?
Link to comment
Share on other sites

I'm afraid you will have to look around the forum as you only mentioned control and I'm sure the single mouse click is causing a conflict with $GUI_EVENT_PRIMARYDOWN. As you can see that little gem I posted can be found in the AutoIt Snippets.

UDF List:

 
_AdapterConnections()_AlwaysRun()_AppMon()_AppMonEx()_ArrayFilter/_ArrayReduce_BinaryBin()_CheckMsgBox()_CmdLineRaw()_ContextMenu()_ConvertLHWebColor()/_ConvertSHWebColor()_DesktopDimensions()_DisplayPassword()_DotNet_Load()/_DotNet_Unload()_Fibonacci()_FileCompare()_FileCompareContents()_FileNameByHandle()_FilePrefix/SRE()_FindInFile()_GetBackgroundColor()/_SetBackgroundColor()_GetConrolID()_GetCtrlClass()_GetDirectoryFormat()_GetDriveMediaType()_GetFilename()/_GetFilenameExt()_GetHardwareID()_GetIP()_GetIP_Country()_GetOSLanguage()_GetSavedSource()_GetStringSize()_GetSystemPaths()_GetURLImage()_GIFImage()_GoogleWeather()_GUICtrlCreateGroup()_GUICtrlListBox_CreateArray()_GUICtrlListView_CreateArray()_GUICtrlListView_SaveCSV()_GUICtrlListView_SaveHTML()_GUICtrlListView_SaveTxt()_GUICtrlListView_SaveXML()_GUICtrlMenu_Recent()_GUICtrlMenu_SetItemImage()_GUICtrlTreeView_CreateArray()_GUIDisable()_GUIImageList_SetIconFromHandle()_GUIRegisterMsg()_GUISetIcon()_Icon_Clear()/_Icon_Set()_IdleTime()_InetGet()_InetGetGUI()_InetGetProgress()_IPDetails()_IsFileOlder()_IsGUID()_IsHex()_IsPalindrome()_IsRegKey()_IsStringRegExp()_IsSystemDrive()_IsUPX()_IsValidType()_IsWebColor()_Language()_Log()_MicrosoftInternetConnectivity()_MSDNDataType()_PathFull/GetRelative/Split()_PathSplitEx()_PrintFromArray()_ProgressSetMarquee()_ReDim()_RockPaperScissors()/_RockPaperScissorsLizardSpock()_ScrollingCredits_SelfDelete()_SelfRename()_SelfUpdate()_SendTo()_ShellAll()_ShellFile()_ShellFolder()_SingletonHWID()_SingletonPID()_Startup()_StringCompact()_StringIsValid()_StringRegExpMetaCharacters()_StringReplaceWholeWord()_StringStripChars()_Temperature()_TrialPeriod()_UKToUSDate()/_USToUKDate()_WinAPI_Create_CTL_CODE()_WinAPI_CreateGUID()_WMIDateStringToDate()/_DateToWMIDateString()Au3 script parsingAutoIt SearchAutoIt3 PortableAutoIt3WrapperToPragmaAutoItWinGetTitle()/AutoItWinSetTitle()CodingDirToHTML5FileInstallrFileReadLastChars()GeoIP databaseGUI - Only Close ButtonGUI ExamplesGUICtrlDeleteImage()GUICtrlGetBkColor()GUICtrlGetStyle()GUIEventsGUIGetBkColor()Int_Parse() & Int_TryParse()IsISBN()LockFile()Mapping CtrlIDsOOP in AutoItParseHeadersToSciTE()PasswordValidPasteBinPosts Per DayPreExpandProtect GlobalsQueue()Resource UpdateResourcesExSciTE JumpSettings INISHELLHOOKShunting-YardSignature CreatorStack()Stopwatch()StringAddLF()/StringStripLF()StringEOLToCRLF()VSCROLLWM_COPYDATAMore Examples...

Updated: 22/04/2018

Link to comment
Share on other sites

  • Moderators

PlayHD,

As AutoIt cannot read your mind, you will have to tell it when you want to move the button and when you want to click it - like this: ;)

#include <GuiConstantsEx.au3>
#include <WindowsConstants.au3>
#include <MenuConstants.au3>

$hGUI = GUICreate("Test", 500, 500)

$cCheck = GUICtrlCreateCheckbox(" Move", 10, 10, 200, 20)

GUICtrlCreateLabel("Move me", 100, 50, 60, 20)
GUICtrlSetBkColor(-1, 0x00FF00)

$cButton = GUICtrlCreateButton("Me too", 40, 100, 80, 23)

GUISetState()

While 1
    $msg = GUIGetMsg()
    Switch $msg
        Case $GUI_EVENT_CLOSE
            Exit
        Case $GUI_EVENT_PRIMARYDOWN
            ; Are we moving?
            If GUICtrlRead($cCheck) = 1 Then
                $cInfo = GUIGetCursorInfo($hGUI)
                $iControl = $cInfo[4]
                If $iControl Then
                    $aPos = ControlGetPos($hGUI, "", $iControl)
                    $iSubtractX = $cInfo[0] - $aPos[0]
                    $iSubtractY = $cInfo[1] - $aPos[1]
                    Do
                        $cInfo = GUIGetCursorInfo($hGUI)
                        ControlMove($hGUI, "", $iControl, $cInfo[0] - $iSubtractX, $cInfo[1] - $iSubtractY)
                    Until Not $cInfo[2]
                EndIf
                ; Empty event queue to prevent the button firing
                Do
                Until GUIGetMsg() = 0
            EndIf
        Case $cButton
            MsgBox(0, "Hi", "Button pressed")
    EndSwitch
WEnd

Any use? :huh:

M23

Public_Domain.png.2d871819fcb9957cf44f4514551a2935.png Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind

Open spoiler to see my UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Link to comment
Share on other sites

PlayHD,

As AutoIt cannot read your mind, you will have to tell it when you want to move the button and when you want to click it - like this: ;)

#include <GuiConstantsEx.au3>
#include <WindowsConstants.au3>
#include <MenuConstants.au3>

$hGUI = GUICreate("Test", 500, 500)

$cCheck = GUICtrlCreateCheckbox(" Move", 10, 10, 200, 20)

GUICtrlCreateLabel("Move me", 100, 50, 60, 20)
GUICtrlSetBkColor(-1, 0x00FF00)

$cButton = GUICtrlCreateButton("Me too", 40, 100, 80, 23)

GUISetState()

While 1
$msg = GUIGetMsg()
Switch $msg
Case $GUI_EVENT_CLOSE
Exit
Case $GUI_EVENT_PRIMARYDOWN
; Are we moving?
If GUICtrlRead($cCheck) = 1 Then
$cInfo = GUIGetCursorInfo($hGUI)
$iControl = $cInfo[4]
If $iControl Then
$aPos = ControlGetPos($hGUI, "", $iControl)
$iSubtractX = $cInfo[0] - $aPos[0]
$iSubtractY = $cInfo[1] - $aPos[1]
Do
$cInfo = GUIGetCursorInfo($hGUI)
ControlMove($hGUI, "", $iControl, $cInfo[0] - $iSubtractX, $cInfo[1] - $iSubtractY)
Until Not $cInfo[2]
EndIf
; Empty event queue to prevent the button firing
Do
Until GUIGetMsg() = 0
EndIf
Case $cButton
MsgBox(0, "Hi", "Button pressed")
EndSwitch
WEnd

Any use? :huh:

M23

Its perfect :) Thank you guys :)
Link to comment
Share on other sites

AutoIt can do the mind reading bit.

#include <GuiConstantsEx.au3>
#include <WindowsConstants.au3>
#include <MenuConstants.au3>

$hGUI = GUICreate("Test", 500, 500)



$cButton = GUICtrlCreateButton("Click or Drag", 40, 100, 100, 23)

GUISetState()

While 1
$msg = GUIGetMsg()
Switch $msg
     Case $GUI_EVENT_CLOSE
         Exit
     Case $GUI_EVENT_PRIMARYDOWN, $cButton
         ; Are we moving?
         $cInfo = GUIGetCursorInfo($hGUI)
         $aPos = ControlGetPos($hGUI, "", $cButton)
         $iSubtractX = $cInfo[0] - $aPos[0]
         $iSubtractY = $cInfo[1] - $aPos[1]
         Sleep(200)
         $cInfo = GUIGetCursorInfo($hGUI)
         If $cInfo[2] = 1 Then
             $cInfo = GUIGetCursorInfo($hGUI)
             If $cInfo[4] = $cButton Then

                 Do
                     $cInfo = GUIGetCursorInfo($hGUI)
                     ControlMove($hGUI, "", $cButton, $cInfo[0] - $iSubtractX, $cInfo[1] - $iSubtractY)
                 Until Not $cInfo[2]
             EndIf
             ; Empty event queue to prevent the button firing

         Else
             MsgBox(0, "Hi", "Button pressed")
         EndIf
             Do
             Until GUIGetMsg() = 0
EndSwitch
WEnd
Edited by martin
Serial port communications UDF Includes functions for binary transmission and reception.printing UDF Useful for graphs, forms, labels, reports etc.Add User Call Tips to SciTE for functions in UDFs not included with AutoIt and for your own scripts.Functions with parameters in OnEvent mode and for Hot Keys One function replaces GuiSetOnEvent, GuiCtrlSetOnEvent and HotKeySet.UDF IsConnected2 for notification of status of connected state of many urls or IPs, without slowing the script.
Link to comment
Share on other sites

  • Moderators

martin,

Clever. :thumbsup:

M23

Public_Domain.png.2d871819fcb9957cf44f4514551a2935.png Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind

Open spoiler to see my UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...