Jump to content

Recommended Posts

I am trying to create a script that allows me to run and use it with CMD as the interface.

For example:

C:\>myscript

Enter PIN

: ****

Success

C:\>

This is the code I have so far...

#AutoIt3Wrapper_Change2CUI=y
ConsoleWrite("Enter PIN" & @CRLF & ":")

Local $input

While 1
$input &= ConsoleRead()
if StringInStr($input,@CRLF) <> 0 then ExitLoop
Wend

if $input = "1111" & @CRLF Then
ConsoleWrite("Success")
Else
ConsoleWrite("Failure")
ConsoleWrite($input)

EndIf

The problem is that after it writes Enter PIN: it will not accept input and gets stuck. After I close the script, all the input I typed shows up in cmd.

C:\>myscript

Enter PIN

:

;;;; get's stuck,closes script

C:\>1111

I want be able to run this script without opening another cmd window but I haven't been able to find relevant examples for creating a "console" application used through cmd.

Can anyone help me out?

Link to post
Share on other sites

Since it hasn't been posted on the forum yet, you won't find mine: https://github.com/MattDiesel/au3-console

Example from _Console_Alloc: https://github.com/MattDiesel/au3-console/blob/master/Examples/_Console_Alloc.au3

This UDF is work in progress, but is pretty complete. Probably not the easiest to use as it is more of a direct wrapper over the windows api.

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By zoel
      Hello people, I have a script which calls CMD and executes the netstat command, but when I run it through SCITE the GUI opens but I have no output, How can I run the command as administrator?
      Here is my script so far
      #include <AutoItConstants.au3> #include <GUIConstantsEx.au3> #include <GuiEdit.au3> #include <ScrollBarsConstants.au3> #include <WindowsConstants.au3> #RequireAdmin Local $aWndPos Local $hWnd = GUICreate("Form2", 900, 420, -1, -1, Default + $WS_MAXIMIZE) GUISetBkColor(0xE4E4E4) Local $idFilemenu = GUICtrlCreateMenu("&File") Local $idExititem = GUICtrlCreateMenuItem("Exit", $idFilemenu) Local $idInput = GUICtrlCreateEdit("", 210, 10, 660, 360) GUICtrlSetResizing(-1, $GUI_DOCKBORDERS) GUICtrlSetFont(-1, 10, 400, Default, "COURIER NEW") Local $idButton = GUICtrlCreateButton("NetStat", 10, 10, 190, 25) GUICtrlSetResizing(-1, BitOR($GUI_DOCKLEFT, $GUI_DOCKTOP, $GUI_DOCKWIDTH, $GUI_DOCKHEIGHT)) GUISetState(@SW_SHOW) While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE Exit Case $idExititem Exit Case $idButton GUICtrlSetData($idInput, _CmdInfo() & @CRLF) _GUICtrlEdit_Scroll($idInput, $SB_SCROLLCARET) _GUICtrlEdit_Scroll($idInput, $SB_SCROLLCARET) EndSwitch WEnd Func _CmdInfo($_sCmdInfo = "netstat /b") Local $iPID = Run(@ComSpec & " /c " & $_sCmdInfo, "", @SW_HIDE, BitOR($STDERR_CHILD, $STDOUT_CHILD)) ; Wait until the process has closed using the PID returned by Run. ProcessWaitClose($iPID) ; Read the Stdout stream of the PID returned by Run. This can also be done in a while loop. Look at the example for StderrRead. Local $sOutput = StringReplace(StdoutRead($iPID), @CRLF & @CRLF, @CRLF) Local $sOutErr = StringReplace(StderrRead($iPID), @CRLF & @CRLF, @CRLF) Local $sReult = $sOutput <> "" ? $sOutput : $sOutErr Return $sReult EndFunc  
    • By cruisepandey
      Hi There ! 
      I have a script here : 
       
      ;Launch CMD
      Run("C:\Windows\System32\cmd.exe")
      sleep(2000)
      $cmdHandle = WinActivate("C:\Windows\System32\cmd.exe")
      Sleep(2000)
      ;Sending document
      ControlSend($cmdHandle, "", "", "ftp" & @CRLF)
      ControlSend($cmdHandle, "", "", "open" & @CRLF)
      Sleep(2000)
      ControlSend($cmdHandle, "", "", "first command" & @CRLF)
      Sleep(2000)
      ControlSend($cmdHandle, "", "", "second-coomand" & @CRLF)
       
      first-command and second-command I can't provide cause it's internal. I have complied this .au3 file into an exe and it does the work. But I need to invoke this with Java. Java code I have tried is : 
       
          ProcessBuilder pb = new ProcessBuilder("C:\\Users\\username\\eclipse-workspace\\Examples\\src\\com\\own\\examples\\etc.exe");
          pb.start();
          Thread.sleep(5000);
       
      Through java it just launches the cmd and nothing happens after that. Please help !!
    • By Chimp
      I'm trying to drive a command prompt by sending instructions via a NamedPipe.
      This way you can (should) be able to send commands to the command prompt and at the same time "view" the result in the same window.
      This is not allowed if you run a command prompt with "opt_flag" parameters (redirected streams) because this will disable StdOut on the cmd itself.
      This small (trivial) snippet works for the first command sent to the cmd, but further submissions will fail.
      Maybe the problem is in how I use the run () command to start a new cmd with the StdIn redirect from the NamedPipe. It seems that the generated cmd will close automatically after the first reception of the command via NamedPipe.
      suggestions on how to make it work are welcome
      thanks
      #include <NamedPipes.au3> #include <WinAPI.au3> ; Creates an instance of a named pipe Global $sPipeName = "\\.\pipe\pipename" Global $hPipe = _NamedPipes_CreateNamedPipe($sPipeName, 1, 1) MsgBox(0, "Debug", "Pipe created. Now open a CMD") ; run a cmd with only StdIn redirected (StdIn data incoming from a pipe) Global $hCMD = Run(@ComSpec & " /K cmd < " & $sPipeName & @CRLF, "c:\") ; ok? MsgBox(0, "Debug", "now Send a command to the cmd via a NamedPipe") _StdInPipeWrite("dir" & @CRLF) MsgBox(0, 'Debug', "further commands will fail" & @CRLF & "now send command 'dir c:\windows'") $sMessage = "Dir c:\windows" & @CRLF _StdInPipeWrite($sMessage) MsgBox(0, 'Debug', "send another command (will also fail)" & @CRLF & "now send command 'echo Hello'") _StdInPipeWrite("echo Hello" & @CRLF) MsgBox(0, "Debug", "end of test") ProcessClose($hCMD) Func _StdInPipeWrite($sMessage) ; =============================================================================================================================== ; This function writes a message to the pipe ; =============================================================================================================================== Local $iWritten, $iBuffer, $pBuffer, $tBuffer $iBuffer = StringLen($sMessage) + 1 $tBuffer = DllStructCreate("char Text[" & $iBuffer & "]") $pBuffer = DllStructGetPtr($tBuffer) DllStructSetData($tBuffer, "Text", $sMessage) If Not _WinAPI_WriteFile( _ $hPipe, _ ; ...... Handle to the file to be written $pBuffer, _ ; .... Pointer to the buffer containing the data to be written $iBuffer, _ ; .... Number of bytes to be written to the file $iWritten, _ ; ... The number of bytes written 0 _ ; ............ [optional] A $tagOVERLAPPED structure or a pointer to it ) Then ConsoleWrite("WriteMsg: _WinAPI_WriteFile failed" & @CRLF & _WinAPI_GetLastErrorMessage()) Else ConsoleWrite("WriteMsg: write OK" & @CRLF & _WinAPI_GetLastErrorMessage() & @CRLF) EndIf EndFunc ;==>_StdInPipeWrite  
    • By Luigi
      Greetings,
      I need write a command line to run an .exe with parameters, one this parameters is a password with special characters  like:   [ ] \ "  etc.
      The password is write between double cotes too.
      When run this command line, catch error.
      I buid this function, sometimes run ok, others show error.

      Someone can any idea?

      Best ragards
      #include <Array.au3> Global $G_AIX_DEFAULT_PASSWORD = "******" Func Scape_Word_To_MSDOS($var = "") ;~ https://www.robvanderwoude.com/escapechars.php Local $aCharacters[][2] = [ _ ["%", "%%"], _ ["^", "^^"], _ ["&", "^&"], _ ["<", "^<"], _ [">", "^>"], _ ["|", "^|"], _ ["'", "^'"], _ ["`", "^`"], _ [",", "^,"], _ [";", "^;"], _ ["=", "^="], _ ["(", "^("], _ [")", "^)"], _ ["!", "^^!"], _ ["\", "\\"], _ ["[", "\["], _ ["]", "\]"], _ ['"', '\"""'], _ [".", "\."], _ ["*", "\*"], _ ["?", "\?"] _ ] Local $iSearch $var = StringSplit($var, "", $STR_NOCOUNT) Local $iSize = UBound($var, $UBOUND_ROWS) - 1 For $ii = 0 To $iSize $iSearch = _ArraySearch($aCharacters, $var[$ii]) If $iSearch >= 0 Then $var[$ii] = $aCharacters[$iSearch][1] Next Return _ArrayToString($var, "") EndFunc ;==>Scape_Word_To_MSDOS Local $password = "-Dk5iFB2UjOt[-x|""" & "" Local $password_scape = Scape_Word_To_MSDOS($password) ConsoleWrite("[" & $password & "]" & @LF) ConsoleWrite("[" & $password_scape & "]" & @LF)  
       
    • By Burgs
      Greetings,
        I would like to be able to write a script to send commands to the console for creation of Gstreamer pipelines.  I was thinking of something similar to this:
      Local $iPID = Run("C:\Windows\System32\cmd", "", @SW_MAXIMIZE) ;THIS OPENS THE CONSOLE...!!! if $iPID == 0 Then ConsoleWrite(@CRLF & "I DID NOT OPEN CMD...error: " & @error & @CRLF) if $iPID <> 0 Then ConsoleWrite(@CRLF & "I OPENED CMD...!!!" & @CRLF) $hCmd = WinGetHandle("C:\WINDOWS\system32\cmd.exe") if $hCmd <> 0 Then WinActivate($hCmd) ;ensure command console is active... $sOutput = Send("cd C:\gstreamer\1.0\x86_64\bin" & @CRLF, $SEND_RAW) $sOutput = Send("gst-launch-1.0 videotestsrc ! autovideosink" & @CRLF, $SEND_RAW) Sleep(3000) ControlSend($hCmd, "", "", "exit" & @CR) EndIf ;$hCmd NOT "0"... I don't really know if this is the best way to open the console and send commands into it.  I'm also not sure about how to best catch any errors that may occur...likely this needs to be accomplished with the STDOUTREAD command however I've not had experience using it before and therefore would appreciate some advice that anybody may offer. 
      Basically I'm seeking guidance on how to best automate the opening of the console, sending lines of commands to be executed, and handling any potential errors in the execution of those commands...I thank you in advance.  Regards.
×
×
  • Create New...