Jump to content
  1. BlueRabbit

    BlueRabbit

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By joseLB
      Hi
      This piece of code creates and reads OK a key at  "HKEY_LOCAL_MACHINE" and can be changed for a key at "HKEY_CURRENT_USER"
      $sta= RegWrite("HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Command Processor", "wav", "REG_SZ", "5555") MsgBox(4096,"wrote", $sta &@cr& @error) $zz= RegRead ("HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Command Processor", "wav") MsgBox(4096,"readed","="&$zz &@cr& @error) Exit With  HKEY_CURRENT_USER, in RegEdit we can see the created key, and we can create the key by hand/RegEdit and everything Works OK.
      At  HKEY_LOCAL_MACHINE we can´t see the created key above  thru RegEdit, but it Works (even not seeing, I can read). But  if I create "by hand"/RegEdit  the key,  it can´t read it with   $zz= RegRead  ("HKEY_LOCAL_MACHINE.... above.
      I´m the PC´s WIN.7 administrator. Even so I ran RegEdit as administrator and also the compiled AU3 and also plain. No changes.
      edit: even if Try   "HKEY_LOCAL_MACHINE\SOFTWARE\AAA", "wav", the same holds true.
      $sta= RegWrite("HKEY_LOCAL_MACHINE\SOFTWARE\AAA", "wav", "REG_SZ", "4444") MsgBox(4096,"wrote", $sta &@cr& @error) $zz= RegRead ("HKEY_LOCAL_MACHINE\SOFTWARE\AAA", "wav") MsgBox(4096,"readed","="&$zz &@cr& @error) Exit Seems that it creates this key at another place.... I can read the above value ("4444"), even after a boot, even the key not showing in regedit. And if I create it by hand key AAA/wav with a distinct value (666), t, it continues Reading the old value = 444.
      Thanks
      Jose
       
    • By nacerbaaziz
      good morning everybody.
      today i liked to share an small example with you
      which it an function to read the registry values as an array
      the result array is 2d array witch
      $a_array[n][0] = value name
      $a_array[n][1] = value Data
      $a_array[0][0] = values count
      here's the function

      #include <Array.au3> #include <WinAPIReg.au3> #include <APIRegConstants.au3> Local $a_array = _RegReadToArray("HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run") If @error Then     MsgBox(16, "error", @error)     Exit EndIf _ArrayDisplay($a_array) Func _RegReadToArray($s_RegKey)     Local $a_KeySplitInfo = StringSplit($s_RegKey, "\\", 2)     If UBound($a_KeySplitInfo) <= 1 Then         $a_KeySplitInfo = StringSplit($s_RegKey, "\", 2)         If UBound($a_KeySplitInfo) <= 1 Then Return (1, 1, 0)     EndIf     Local $H_KeyInfo = "", $s_RegKeyInfo = ""     Switch $a_KeySplitInfo[0]         Case "hklm", "HKEY_LOCAL_MACHINE", "hklm64", "HKEY_LOCAL_MACHINE64"             $H_KeyInfo = $HKEY_LOCAL_MACHINE         Case "hkCu", "HKEY_CURRENT_USER", "hkCU64", "HKEY_CURRENT_USER64"             $H_KeyInfo = $HKEY_CURRENT_USER         Case "hkCr", "HKEY_CLASSES_ROOT", "HKCR64", "HKEY_CLASSES_ROOT64"             $H_KeyInfo = $HKEY_CLASSES_ROOT         Case "HKU", "HKEY_USERS", "HKU64", "HKEY_USERS64"             $H_KeyInfo = $HKEY_USERS         Case Else             Return SetError(2, 2, 0)     EndSwitch     _ArrayDelete($a_KeySplitInfo, 0)     $s_RegKeyInfo = _ArrayToString($a_KeySplitInfo, "\")     Local $H_KeyInfoOpen = _WinAPI_RegOpenKey($H_KeyInfo, $s_RegKeyInfo, $KEY_READ)     Local $A_KeyInfo = _WinAPI_RegQueryInfoKey($H_KeyInfoOpen)     If @error Then Return SetError(1, 1, 0)     _WinAPI_RegCloseKey($H_KeyInfoOpen)     Local $A_RegVal[$A_KeyInfo[2] + 1][2]     Local $iV = 1, $s_RegRead = ""     While 1         $s_RegVal = RegEnumVal($s_RegKey, $iV)         If @error <> 0 Then ExitLoop         $s_RegRead = RegRead($s_RegKey, $s_RegVal)         If Not (@error) Then             $A_RegVal[$iV][0] = $s_RegVal             $A_RegVal[$iV][1] = $s_RegRead         EndIf         $iV += 1     WEnd     $A_RegVal[0][0] = UBound($A_RegVal) - 1     If $A_RegVal[0][0] >= 1 Then         Return $A_RegVal     Else         Return SetError(3, 3, 0)     EndIf EndFunc   ;==>_RegReadToArray
      i hope you benefit from it
      with my greetings
    • By Simpel
      Hi,
      I wondered why negative integers I wrote into registry (e.g. negative x-coordinates of a gui if using two monitors and the right one is the main one) wouldn't return right when reading. Now I know: it is saved as an unsigned integer (without algebraic sign). So here is a snippet that is changing unsigned to signed integer:
      Global Const $g_sRegKey = "HKEY_CURRENT_USER\Software\" & @ScriptName ; path to registry RegWrite($g_sRegKey, "Value", "REG_DWORD", -2147483647) ; write some negative integer into registry; -2147483647 highest possible negative integer , 2147483648 highest possible positive integer if talking of 32bit Local $sValue = RegRead($g_sRegKey, "Value") ; read out registry ConsoleWrite("Value: " & $sValue & @CRLF) ; show real value in console Local $sResult = _SignedInteger($sValue) ; change to signed value ConsoleWrite("Result: " & $sResult & @CRLF) ; and show it in console Func _SignedInteger($iUnsignedInteger) Local $iSignedInteger If $iUnsignedInteger > (2^31) Then ; then it means a negative integer $iSignedInteger = $iUnsignedInteger - (2^32) Else $iSignedInteger = $iUnsignedInteger EndIf Return $iSignedInteger EndFunc It took me some time to find out the problem and so I hope I can help somebody with this.
      Regards, Conrad
    • By TheDcoder
      Hello, it has been a long time since I have posted here
      I am working on an AutoIt project where I need to enable to user to interactively choose any point or coordinate on the screen... something like a big overlay where the user can click anywhere on the screen to select that point. @UEZ's screenshot tool may have something similar to what I need:
      I just checked the source code for the tool and I see that the Mark_Area function has a part in selecting the area to screenshot, I tried to figure out how it works but it is simply too complex and long...
      So I was wondering if there were any examples of interactively selecting points on a screen? Maybe an UDF that I can just use in my script to make the whole thing a matter of adding few lines
      Thank you for the replies in advance!
    • By copyleft
      I've looked at a bunch of SetACL examples on this site and none seem to be able to convert this batch script into a working AutoIt script.
      BATCH
      @echo off "%~dp0setacl.exe" -on "HKEY_CLASSES_ROOT\CLSID\{9C60DE1E-E5FC-40f4-A487-460851A8D915}\DefaultIcon" -ot reg -actn setowner -ownr n:administrators >nul 2>nul "%~dp0setacl.exe" -on "HKEY_CLASSES_ROOT\CLSID\{9C60DE1E-E5FC-40f4-A487-460851A8D915}\DefaultIcon" -ot reg -actn ace -ace "n:administrators;p:full" >nul 2>nul Reg.exe add "HKCR\CLSID\{9C60DE1E-E5FC-40f4-A487-460851A8D915}\DefaultIcon" /ve /t REG_EXPAND_SZ /d "C:\My.ico" /f NON-WORKING AUTOIT
      RunWait('setacl.exe "HKCR64\CLSID\{9C60DE1E-E5FC-40f4-A487-460851A8D915}\DefaultIcon" -ot reg -actn setowner -ownr "n:administrators"') RunWait('setacl.exe "HKCR64\CLSID\{9C60DE1E-E5FC-40f4-A487-460851A8D915}\DefaultIcon" -ot reg -actn setowner -ownr "n:administrators;p:full"') RegWrite('HKCR64\CLSID\{9C60DE1E-E5FC-40f4-A487-460851A8D915}\DefaultIcon', '','REG_EXPAND_SZ','C:\Windows\My.ico') Any ideas on what I'm doing wrong?
       
×
×
  • Create New...