Jump to content
Sign in to follow this  
grimmlock

Restore from System Tray

Recommended Posts

I have 2 guis both of which minimize to the system tray like I want, however the first GUI when it is "restored" pops right up, and yet the second GUI, when it "restores", looks like it is flying in.

On the second GUI I have and want to have the minimize and Close butttons but how do I get is so that when the GUI is restored from the taskbar it does not fly in.

Code for the first GUI

#NoTrayIcon
#include <File.au3>
#include <ButtonConstants.au3>
#include <EditConstants.au3>
#include <Constants.au3>
#include <GUIConstantsEx.au3>
#include <GUIListBox.au3>
#include <StaticConstants.au3>
#include <WindowsConstants.au3>


Opt("TrayOnEventMode",1)
Opt("TrayMenuMode",1)

TraySetOnEvent($TRAY_EVENT_PRIMARYUP,"SpecialEvent")

GUICreate("HelpDesk App", 300, 620, Default, Default, BitAND($WS_CAPTION, $WS_POPUP, $WS_SYSMENU), $WS_EX_CONTEXTHELP)

GUISetState()


Func SpecialEvent()
GUISetState(@SW_SHOW)
TraySetState(2) ; hide
EndFunc ;==> SpecialEvent

Code for the second GUI

#include <File.au3>
#include <ButtonConstants.au3>
#include <EditConstants.au3>
#include <Constants.au3>
#include <GUIConstantsEx.au3>
#include <GUIConstants.au3>
#include <GUIListBox.au3>
#include <StaticConstants.au3>
#include <WindowsConstants.au3>
#include <Array.au3>
#include <Process.au3>
#include <WinAPI.au3>
#include <GUIComboBox.au3>
#Include <String.au3>
#include <Icons.au3>
#include <GuiTab.au3>
#include <GUIButton.au3>
#Include <TabConstants.au3>

#NoTrayIcon


Opt("TrayOnEventMode",1)
Opt("TrayMenuMode",1)

TraySetOnEvent($TRAY_EVENT_PRIMARYUP,"SpecialEvent")
GUICreate("Utility v3.0", 315, 750)

GUISetState()


Func SpecialEvent()
GUISetState(@SW_SHOW)
TraySetState(2) ; hide
EndFunc ;==> SpecialEvent

Note* I have tried adding the same styles to the second GUI but it removes the Minimize and close buttons :(

Thanks,

Grimm

Edited by grimmlock

Thanks

Grimm

Share this post


Link to post
Share on other sites

First design two Gui's lets say the code goes like this:

#include <GUIConstantsEx.au3>


Opt("GUIOnEventMode", 1) ; Change to OnEvent mode

$Parent = GUICreate("Parent window", 200, 100)
$Button_Parent = GUICtrlCreateButton("Button1", 0, -1)
Guictrlsetonevent(-1, "Button1")
$Child = GUICreate("Child Window", 200, 100)
$Button_Child = GUICtrlCreateButton("Button2", 0, -1)
Guictrlsetonevent(-1, "Button2")

Func button1()
GUICtrlSetState ( $Parent, @sw_hide )
GUICtrlSetState ( $Child, @sw_show )
Endfunc

Func button2()
GUICtrlSetState ( $Parent, @sw_show)
GUICtrlSetState ( $Child, @sw_hide)
Exit
Endfunc

While 1
Wend
; you can use functions from this script to do the stuff you need to restore the gui you need from the systemtray

I hope this will do what you need your script to do...

Edited by ac1dm4n

[u]My dream is to have a dream...[/u]

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Fenzik
      Hello all!
      i'm searching here, cause i do'nt know where else to search..
      I'm developing some projects, mainly intended to help Blind users of computers.
       
      I'm also blind, so my guis are Ok for Screen readers, but i'm not sure, if they are good also for normal users..
       
      So I¨m searching here for somebody, interested in Autoit, which have no problem to help me a bit with designating my apps.
       
      My apps are written in Czech language, so i prefer somebody from Czech republic..
       
      If somebody want to help me, don't hesitate to contact me personaly, contacts and my projects are available on web in my profile.
       
      So thank you for potential help and i'm sorry if i missed some forum etiquette rule here.
       
      I'm not sure how it works here with searching for interested people and then contact them personaly.
       
      Fenzik
    • By GNGNUT
      Hi guys
      what i am trying to do is have My Gui LIve update Out of focus, so i can have this on a 2nd monitor streaming live updates while i continue to work on other screen, 
      i have been googling and looking at other threads about focus and stuff , but they do not seem to match what I'm after, 

      to be clear - i am not wanting to put focus on the GUI for it to auto update values, 
       
      if you have any positive feed back on the script while you read - i would be more then happy to accept - as im still building my Knowledge of this coding, 
      and stream line is always better Garbage code writing, 
       
      Kind regards 
      Gngnut
       
      #include <MemoryConstants.au3> #include <MsgBoxConstants.au3> #include <ButtonConstants.au3> #include <GUIConstantsEx.au3> #include <StaticConstants.au3> #include <WindowsConstants.au3> Global $currentTime,$currentTimeValue,$v,$Label_Time,$Form1 Global $Label_C2_1,$Label_C2_2,$Label_C2_3,$Label_C2_4,$Label_C2_5,$Label_C2_6,$Label_C2_7 Global $Label_C3_1,$Label_C3_2,$Label_C3_3,$Label_C3_4,$Label_C3_5,$Label_C3_6,$Label_C3_7 ;~ Default Hight for boxs $Hight = 40 $lenght = 180 ;; As per nines comments moved out side of the While loop, AdlibRegister(UpdateTime,250) AdlibRegister(updateValues,500) AdlibRegister(Warning,250) hotkeyset ("{ESC}",Terminate) ;; <<< Used to Quit the programe $aMemStats = MemGetStats() MyGui() ;; running the GUI #Region ### START Koda GUI section ### Form= func MyGui() $ServerName=@ComputerName ; ### Change to your location of image $Image = "C:\Users\gngnut\OneDrive\Pictures\Computer.jpg" ; Creating the form With the Labels $Form1 = GUICreate("My System Status", 800, 750, 225, 173,BitOR($WS_SYSMENU,$WS_MAXIMIZEBOX,$WS_MINIMIZEBOX));$WS_POPUP)) $Pic1 = GUICtrlCreatePic($Image, 0, 0, 800, 750) ;;; #### Column 1 $Label_C1_1 = GUICtrlCreateLabel("Total load currently on RAM:", 71, 192, 180, $Hight, BitOR($SS_CENTER,"")) GUICtrlSetBkColor(-1, 0xFEF200) GUICtrlSetFont(-1, 12, 400, 0, "Lucida Console") $Label_C1_2 = GUICtrlCreateLabel("Total physical RAM:", 71, 248, 180, $Hight, BitOR($SS_CENTER,"")) GUICtrlSetBkColor(-1, 0xFEF200) GUICtrlSetFont(-1, 12, 400, 0, "Lucida Console") $Label_C1_3 = GUICtrlCreateLabel("Available physical RAM:", 71, 304, 180, $Hight, BitOR($SS_CENTER,"")) GUICtrlSetBkColor(-1, 0xFEF200) GUICtrlSetFont(-1, 12, 400, 0, "Lucida Console") $Label_C1_4 = GUICtrlCreateLabel("Total Page Size:", 71, 360, 180, $Hight, BitOR($SS_CENTER,"")) GUICtrlSetBkColor(-1, 0xFEF200) GUICtrlSetFont(-1, 12, 400, 0, "Lucida Console") $Label_C1_5 = GUICtrlCreateLabel("Available Page Size:", 71, 416, 180, $Hight, BitOR($SS_CENTER,"")) GUICtrlSetBkColor(-1, 0xFEF200) GUICtrlSetFont(-1, 12, 400, 0, "Lucida Console") $Label_C1_6 = GUICtrlCreateLabel("Total virtual Size:", 71, 472, 180, $Hight, BitOR($SS_CENTER,"")) GUICtrlSetBkColor(-1, 0xFEF200) GUICtrlSetFont(-1, 12, 400, 0, "Lucida Console") $Label_C1_7 = GUICtrlCreateLabel("Available virtual RAM:", 71, 528, 180, $Hight, BitOR($SS_CENTER,"")) GUICtrlSetBkColor(-1, 0xFEF200) GUICtrlSetFont(-1, 12, 400, 0, "Lucida Console") ;;; #### Column 2 $Label_C2_1 = GUICtrlCreateLabel($aMemStats[$MEM_LOAD] & " %", 311, 192, 180, $Hight, BitOR($SS_CENTER,$WS_BORDER,$SS_CENTERIMAGE)) $colour=0xFEF200 GUICtrlSetFont(-1, 12, 400, 0, "Lucida Console") $Label_C2_2 = GUICtrlCreateLabel($aMemStats[$MEM_TOTALPHYSRAM] & ' Kb' , 311, 248, 180, $Hight, BitOR($SS_CENTER,$WS_BORDER,$SS_CENTERIMAGE)) GUICtrlSetBkColor(-1, 0xFEF200) GUICtrlSetFont(-1, 12, 400, 0, "Lucida Console") $Label_C2_3 = GUICtrlCreateLabel($aMemStats[$MEM_AVAILPHYSRAM] & ' Kb', 311, 304, 180, $Hight, BitOR($SS_CENTER,$WS_BORDER,$SS_CENTERIMAGE)) GUICtrlSetBkColor(-1, 0xFEF200) GUICtrlSetFont(-1, 12, 400, 0, "Lucida Console") $Label_C2_4 = GUICtrlCreateLabel($aMemStats[$MEM_TOTALPAGEFILE] & ' Kb', 311, 360, 180, $Hight, BitOR($SS_CENTER,$WS_BORDER,$SS_CENTERIMAGE)) GUICtrlSetBkColor(-1, 0xFEF200) GUICtrlSetFont(-1, 12, 400, 0, "Lucida Console") $Label_C2_5 = GUICtrlCreateLabel($aMemStats[$MEM_AVAILPAGEFILE] & ' Kb', 311, 416, 180, $Hight, BitOR($SS_CENTER,$WS_BORDER,$SS_CENTERIMAGE)) GUICtrlSetBkColor(-1, 0xFEF200) GUICtrlSetFont(-1, 12, 400, 0, "Lucida Console") $Label_C2_6 = GUICtrlCreateLabel($aMemStats[$MEM_TOTALVIRTUAL] & ' Kb' , 311, 472, 180, $Hight, BitOR($SS_CENTER,$WS_BORDER,$SS_CENTERIMAGE)) GUICtrlSetBkColor(-1, 0xFEF200) GUICtrlSetFont(-1, 12, 400, 0, "Lucida Console") $Label_C2_7 = GUICtrlCreateLabel($aMemStats[$MEM_AVAILVIRTUAL] & ' Kb', 311, 528, 180, $Hight, BitOR($SS_CENTER,$WS_BORDER,$SS_CENTERIMAGE)) GUICtrlSetBkColor(-1, 0xFEF200) GUICtrlSetFont(-1, 12, 400, 0, "Lucida Console") ;;; #### Column 3 $Label_C3_2 = GUICtrlCreateLabel(Round($aMemStats[$MEM_TOTALPHYSRAM]/1024/1024, 2) & ' Gb', 551, 248, 180, $Hight, BitOR($SS_CENTER,$WS_BORDER,$SS_CENTERIMAGE)) GUICtrlSetBkColor(-1, 0xFEF200) GUICtrlSetFont(-1, 12, 400, 0, "Lucida Console") $Label_C3_3 = GUICtrlCreateLabel(Round($aMemStats[$MEM_AVAILPHYSRAM]/1024/1024, 2) & ' Gb', 551, 304, 180, $Hight, BitOR($SS_CENTER,$WS_BORDER,$SS_CENTERIMAGE)) GUICtrlSetBkColor(-1, 0xFEF200) GUICtrlSetFont(-1, 12, 400, 0, "Lucida Console") $Label_C3_4 = GUICtrlCreateLabel(Round($aMemStats[$MEM_TOTALPAGEFILE]/1024/1024, 2) & ' Gb', 551, 360, 180, $Hight, BitOR($SS_CENTER,$WS_BORDER,$SS_CENTERIMAGE)) GUICtrlSetBkColor(-1, 0xFEF200) GUICtrlSetFont(-1, 12, 400, 0, "Lucida Console") $Label_C3_5 = GUICtrlCreateLabel(Round($aMemStats[$MEM_AVAILPAGEFILE]/1024/1024, 2) & ' Gb', 551, 416, 180, $Hight, BitOR($SS_CENTER,$WS_BORDER,$SS_CENTERIMAGE)) GUICtrlSetBkColor(-1, 0xFEF200) GUICtrlSetFont(-1, 12, 400, 0, "Lucida Console") $Label_C3_6 = GUICtrlCreateLabel(Round($aMemStats[$MEM_TOTALVIRTUAL]/1024/1024, 2) & ' Gb', 551, 472, 180, $Hight, BitOR($SS_CENTER,$WS_BORDER,$SS_CENTERIMAGE)) GUICtrlSetBkColor(-1, 0xFEF200) GUICtrlSetFont(-1, 12, 400, 0, "Lucida Console") $Label_C3_7 = GUICtrlCreateLabel(Round($aMemStats[$MEM_AVAILVIRTUAL]/1024/1024, 2) & ' Gb', 551, 528, 180, $Hight, BitOR($SS_CENTER,$WS_BORDER,$SS_CENTERIMAGE)) GUICtrlSetBkColor(-1, 0xFEF200) GUICtrlSetFont(-1, 12, 400, 0, "Lucida Console") $Label_Server = GUICtrlCreateLabel($ServerName, 551, 600, 180, $Hight, BitOR($SS_CENTER,$WS_BORDER,$SS_CENTERIMAGE)) GUICtrlSetBkColor(-1, 0xFEF200) GUICtrlSetFont(-1, 12, 400, 0, "Lucida Console") $Label_Time = GUICtrlCreateLabel($currentTime , 71, 600, 180, $Hight, bitOR($SS_CENTER,$WS_BORDER,$SS_CENTERIMAGE)) GUICtrlSetBkColor(-1, 0xFEF200) GUICtrlSetFont(-1, 12, 400, 0, "Lucida Console") GUISetState(@SW_SHOWNORMAL) #EndRegion ### END Koda GUI section ### EndFunc While 1 Sleep(1000) ; sets a delay of 1 sec per 1000 WEnd ;; close down the Application func Terminate() exit EndFunc ;; Updating Time func UpdateTime() $currentTime = @HOUR&":"& @MIN &":"& @SEC ControlSetText($Form1,"",$Label_Time, $currentTime) EndFunc ;; currently changing the CPU % lable Func Warning() if $aMemStats[$MEM_LOAD] <=40 Then ; Green GUICtrlSetbkColor($Label_C2_1,0x2BFC0B) ElseIf $aMemStats[$MEM_LOAD] >40 and $aMemStats[$MEM_LOAD] <= 80 Then GUICtrlSetbkColor($Label_C2_1,0xFDBE01) Elseif $aMemStats[$MEM_LOAD] > 80 Then GUICtrlSetBkColor($Label_C2_1, 0xEE0C0C) EndIf EndFunc ;; Updating The Lable values of column 2 Only if the values change func updateValues() $aMemStats = MemGetStats() if GUICtrlRead($Label_C2_1) <> $aMemStats[$MEM_LOAD] Then ControlSetText($Form1,"",$Label_C2_1,$aMemStats[$MEM_LOAD]) endif If GUICtrlRead($Label_C2_2) <> $aMemStats[$MEM_TOTALPHYSRAM] & ' Kb' then ControlSetText($Form1,"",$Label_C2_2,$aMemStats[$MEM_TOTALPHYSRAM] & ' Kb') endif If GUICtrlRead($Label_C2_3) <> $aMemStats[$MEM_AVAILPHYSRAM] & ' Kb' then ControlSetText($Form1,"",$Label_C2_3,$aMemStats[$MEM_AVAILPHYSRAM] & ' Kb') endif If GUICtrlRead($Label_C2_4) <> $aMemStats[$MEM_TOTALPAGEFILE] & ' Kb' then ControlSetText($Form1,"",$Label_C2_4,$aMemStats[$MEM_TOTALPAGEFILE] & ' Kb') endif If GUICtrlRead($Label_C2_5) <> $aMemStats[$MEM_AVAILPAGEFILE] & ' Kb' then ControlSetText($Form1,"",$Label_C2_5,$aMemStats[$MEM_AVAILPAGEFILE] & ' Kb') endif If GUICtrlRead($Label_C2_6) <> $aMemStats[$MEM_TOTALVIRTUAL] & ' Kb' then ControlSetText($Form1,"",$Label_C2_6,$aMemStats[$MEM_TOTALVIRTUAL] & ' Kb') endif If GUICtrlRead($Label_C2_7) <> $aMemStats[$MEM_AVAILVIRTUAL] & ' Kb' then ControlSetText($Form1,"",$Label_C2_7,$aMemStats[$MEM_AVAILVIRTUAL] & ' Kb') endif EndFunc  
    • By jantograaf
      Hi all,
      I've been looking around the forum and testing different ways of getting a 'drop zone' to work in my script, but I can't seem to get any response from the event listener. Code compiles perfectly. Chaning the control from a label to an input- or edit-field doesn't change its behaviour, still no response when a file is dropped on there...
      It might just be that I am overlooking a simple detail, so I'm hoping for an extra pair of eyes here or there who can spot why this isn't working as it should. 
      I have another 3500+ lines script where I have basically the same bit of code, and it seems to work in there without problems.
      So, here it goes:
      Global $DD_GUI = GUICreate("DicomDrop",200,200,-1,-1,BitOR($WS_SYSMENU,$WS_POPUP),$WS_EX_ACCEPTFILES) GUISetBkColor(0x030303,$DD_GUI) $DD_GUI_DRAGLABEL = GUICtrlCreateLabel("",0,0,32,32,-1, $GUI_WS_EX_PARENTDRAG) $DD_GUI_DRAGIMAGE = GUICtrlCreateIcon(@ScriptFullPath,201,0,0,32,32) $DD_GUI_TITLELABEL = GUICtrlCreateLabel("DicomDrop",50,10,100,20,$SS_CENTER) GUICtrlSetFont($DD_GUI_TITLELABEL,8,$FW_SEMIBOLD,$GUI_FONTNORMAL,"Verdana") GUICtrlSetColor($DD_GUI_TITLELABEL,0xFFFFFF) $DD_GUI_CLOSE = GUICtrlCreateButton("X",174,4,24,24,$BS_FLAT) GUICtrlSetBkColor($DD_GUI_CLOSE,0x030303) GUICtrlSetColor($DD_GUI_CLOSE,0xFFFFFF) Global $DD_GUI_DROPZONE = GUICtrlCreateLabel("",10,42,180,148) GUICtrlSetState(-1,8) GUICtrlSetBkColor($DD_GUI_DROPZONE,0x181818) GUISetState(@SW_SHOW,$DD_GUI) Local $DD_MSG = 0 While 1 $DD_MSG = GUIGetMsg() Select Case $DD_MSG = $GUI_EVENT_CLOSE ConsoleWrite(@CRLF & "Debug -- Closed by GUI_EVENT_CLOSE") DD_EXIT() Case $DD_MSG = $GUI_EVENT_DROPPED If @GUI_DropId = $DD_GUI_DROPZONE Then Local $DroppedFile = @GUI_DragFile GUIDelete() ConsoleWrite(@CRLF & "Debug -- Dropped file : " & $DroppedFile) EndIf Case $DD_MSG = $DD_GUI_CLOSE ConsoleWrite(@CRLF & "Debug -- Closed by DD_GUI_CLOSEIMAGE") DD_EXIT() EndSelect WEnd Func DD_EXIT() GUIDelete($DD_GUI) Exit EndFunc If anyone has any idea whatsoever, please let me know 🙂
      Thanks in advance and kind regards,
      Jan
    • By matwachich
      Hi AutoIters!
      Here is my new UDF about GUIs: it's an enhanced mixture of Advanced InputBox (deprecated) and KODA Parser (deprecated), with additional functions.
      What you can do with it:
      Parse KODA files and directly create GUIs (_GUIUtils_CreateFromKODA) Parse a simple JSON form definition to simply create advanced InputBoxes with any amount/type of input controls (_GUIUtils_CreateFromJSON) Created GUIs are returned as Scripting.Dictionary objects, and you have helper functions to access GUIs controls by their names (_GUIUtils_HWnd, _GUIUtils_CtrlID, _GUIUtils_HCtrl ...) A function that can make a GUI created from KODA/JSON (defined by it's $oForm object) and make it a modal InputDialogBox (just like InputBox, but returns all entered data as Scripting.Dictionary object) Functions are documented, and there are some examples.
      Consider this UDF as beta, but since I'm currently using it in a small commercial project, it should become production ready in near future.
      To always get the latest code version, get it from Github (more up to date than this topic).
      Update 04/02/2020:
      New simple application example Fixed focused control handling in _GUIUtils_InputDialog Reset input values before returning from _GUIUtils_InputDialog Fixed CloseOnEsc in _GUIUtils_InputDialog Fixed Input not reset Fixed all ListBox items are selected Project now on GitHub https://github.com/matwachich/autoit-guiutils/
      Update 05/02/2020:
      Support for nodate for Date and Time input controls (pass null value) New handling of focused control _GUIUtils_InputDialog: Now, you can specify the focused control in $oInitialData by setting "controlName:focus" = True Updated documentation of _GUIUtils_InputDialog Update 07/02/2020:
      Bug corrected when setting Data input control Added: abillity to read a single input control New functions (_GUIUtils_GetInputs, _GUIUtils_WriteInputs), documentation completion. Readme file and screenshots on Github Page  
      GUIUtils.zip
    • By antonioj84
      I am not able to use the $GUI_READ_EXTENDED with the  Metro UDF,  any work around ?
      Local $aPos[2] = [$Radio1, $Radio2] For $Radio In $aPos If GUICtrlRead($Radio) = $GUI_UNCHECKED Then ContinueLoop IniWrite($sGUIstate_IniFile, "Data", "POS", GUICtrlRead($Radio, $GUI_READ_EXTENDED)) ;; return the text of the menu item ExitLoop Next  
×
×
  • Create New...