Jump to content
  1. trajtemberg

    trajtemberg

  2. Jith

    Jith

  3. KLM

    KLM

  4. Danyfirex

    Danyfirex

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By pboom
      Attached is a full Controller for SONY Cameras using the VISCA protocol, written in AutoIt. Everything required to build a EXE file is included.
      I wrote this software because I couldn't find decent control software for these cameras, I tried at least a dozen packages. So in my mind, anyway, it is better than anything else out there.
      The software will also controls several other pieces of AV equipment. The software is very specific to my application but should be easy to adapt and would make a good starting point for someone else trying to roll there own Audio Video control program.
      It features the following;
      Unlimited number of presets Macros to combine recall of presets Supports JoyStick control Supports up to 7 cameras in Daisy chain configuration. Unique Pan Tilt control pad provides variable speed control by dragging Mouse on pad, makes the cameras easy to control. Web Server allows Macros to be activated from OBS Studio Modular structure should make the code adaptable to other camera control protocols. Modular structure should make additional hardware support easy to add or remove. Will show errors during start up if hardware is not present but it will run. Serial ports configured with included INI file. Joystick response can be adjusted through settings in the INI file. Lots of documentation on how things are setup in the various source modules. Built in web server allows control from OBS Studio. Lots more documentation available wiring instructions, protocol documents for hardware etc. but that would exceed file upload size. PM me if you are interested.
      And thanks to everyone on this forum that provided the many libraries and bits of software used to make this project work. I couldn't have done it without the many contributors to this forum. I did my best to give the appropriate credit in each module.
       
      GeorgeController.zip Operation Instructions.pdf

    • By mLipok
      In the past there was many questions about how to: "Automatic file upload using without user interaction"

      https://www.autoitscript.com/forum/topic/92907-ie-8-input-namenomfic-typefile-idnomfic/
      https://www.autoitscript.com/forum/topic/116899-cant-automate-input-typefile-tag-in-ie/?tab=comments#comment-815478
      https://www.autoitscript.com/forum/topic/14883-input-typefile/
      https://www.autoitscript.com/forum/topic/188708-how-to-set-the-value-of-an-input-typefile-element/
      https://www.autoitscript.com/forum/topic/91513-how-can-i-auto-set-file-path-for-input-file-in-ie/
      https://www.autoitscript.com/forum/topic/116899-cant-automate-input-typefile-tag-in-ie/
      https://www.autoitscript.com/forum/topic/169190-how-to-script-file-upload-button/
      https://www.autoitscript.com/forum/topic/145327-how-to-deal-with-ie-window-for-upload-a-fileinput-typefile/
      https://www.autoitscript.com/forum/topic/140482-internet-explorer-input-file-problem/
       
      I found solution here: 
      https://stackoverflow.com/questions/33253517/upload-a-file-via-input-input-in-html-form-with-vba
      and:
      https://www.motobit.com/tips/detpg_uploadvbsie/
      And I translate this code to AutoIt3 code:
      ; Upload file using http protocol And multipart/form-data ; v1.01 ; 2001 Antonin Foller, PSTRUH Software Global $oErrorHandler = ObjEvent("AutoIt.Error", _ErrFunc) do_vbsUpload() Func do_vbsUpload() #cs ; We need at least two arguments (File & URL) ConsoleWrite('- ' & @ScriptLineNumber & @CRLF) If $CmdLine[0] < 2 Then InfoEcho() ConsoleWrite('- ' & @ScriptLineNumber & @CRLF) ; Are some required objects missing? If StringInStr(CheckRequirements(), "Error") > 0 Then InfoEcho() ConsoleWrite('- ' & @ScriptLineNumber & @CRLF) Local $s_FileName, $s_DestURL, $s_FieldName $s_FieldName = "FileField" ; Default field name For $i_argCounter = 1 To $CmdLine[0] ConsoleWrite('+ '& $i_argCounter& ' >> ' & $CmdLine[$i_argCounter] & @CRLF) Select Case $i_argCounter = 1 ;~ $s_FileName = $CmdLine[$i_argCounter] $s_FileName = @ScriptFullPath Case $i_argCounter = 2 $s_DestURL = $CmdLine[$i_argCounter] Case $i_argCounter = 3 $s_FieldName = $CmdLine[$i_argCounter] EndSelect Next UploadFile($s_DestURL, $s_FileName, $s_FieldName) #ce UploadFile('http://www.dobeash.com/test.html', @ScriptFullPath, 'fileExample') EndFunc ;==>do_vbsUpload ; ******************* upload - begin ; Upload file using input type=file Func UploadFile($s_DestURL, $s_FileName, $s_FieldName) ; Boundary of fields. ; Be sure this string is Not In the source file Const $Boundary = "---------------------------0123456789012" ; Get source file As a binary data. Local $d_FileContents = GetFile($s_FileName) ; Build multipart/form-data document Local $s_FormData = BuildFormData($d_FileContents, $Boundary, $s_FileName, $s_FieldName) ; Post the data To the destination URL IEPostBinaryRequest($s_DestURL, $s_FormData, $Boundary) EndFunc ;==>UploadFile ; Build multipart/form-data document with file contents And header info Func BuildFormData($d_FileContents, $Boundary, $s_FileName, $s_FieldName) Const $s_ContentType = "application/upload" ; The two parts around file contents In the multipart-form data. Local $s_Pre = "--" & $Boundary & @CRLF & mpFields($s_FieldName, $s_FileName, $s_ContentType) Local $s_Po = @CRLF & "--" & $Boundary & "--" & @CRLF ; Build form data using recordset binary field Const $i_adLongVarBinary = 205 Local $oRS = ObjCreate("ADODB.Recordset") ; https://docs.microsoft.com/en-us/sql/ado/reference/ado-api/append-method-ado?view=sql-server-ver15 $oRS.Fields.Append("b", $i_adLongVarBinary, StringLen($s_Pre) + BinaryLen($d_FileContents) + StringLen($s_Po)) $oRS.Open() $oRS.AddNew() ; Convert Pre string value To a binary data Local $i_LenData = StringLen($s_Pre) $oRS("b").AppendChunk(StringToMB($s_Pre) & StringToBinary(Chr(0))) $s_Pre = $oRS("b").GetChunk($i_LenData) $oRS("b") = "" ; Convert Po string value To a binary data $i_LenData = StringLen($s_Po) $oRS("b").AppendChunk(StringToMB($s_Po) & StringToBinary(Chr(0))) $s_Po = $oRS("b").GetChunk($i_LenData) $oRS("b") = "" ; Join Pre & $d_FileContents & Po binary data $oRS("b").AppendChunk($s_Pre) $oRS("b").AppendChunk($d_FileContents) $oRS("b").AppendChunk($s_Po) $oRS.Update() Local $s_FormData = $oRS("b") $oRS.Close() Return $s_FormData EndFunc ;==>BuildFormData ; sends multipart/form-data To the URL using IE Func IEPostBinaryRequest($s_URL, $s_FormData, $Boundary) ; Create InternetExplorer Local $oIE = ObjCreate("InternetExplorer.Application") ; You can uncoment Next line To see form results $oIE.Visible = True ; Send the form data To $s_URL As POST multipart/form-data request $oIE.Navigate($s_URL, '', '', $s_FormData, _ "Content-Type: multipart/form-data; boundary=" & $Boundary & @CRLF) While $oIE.Busy Wait(1, "Upload To " & $s_URL) WEnd ; Get a result of the script which has received upload ;~ On Error Resume Next Local $s_IE_InnerHTML = $oIE.Document.body.innerHTML MsgBox(0, 'TEST #' & @CRLF & @ScriptLineNumber, $s_IE_InnerHTML) $oIE.Quit() Return $s_IE_InnerHTML EndFunc ;==>IEPostBinaryRequest ; Infrormations In form field header. Func mpFields($s_FieldName, $s_FileName, $s_ContentType) Local $s_MPTemplate = _ ; template For multipart header 'Content-Disposition: form-data; name="{field}";' & _ 'FileName="{file}"' & @CRLF & _ 'Content-Type: {ct}' & @CRLF & @CRLF & _ '' Local $s_Out $s_Out = StringReplace($s_MPTemplate, "{field}", $s_FieldName) $s_Out = StringReplace($s_Out, "{file}", $s_FileName) $s_Out = StringReplace($s_Out, "{ct}", $s_ContentType) Return $s_Out EndFunc ;==>mpFields Func Wait($i_Seconds, $s_Message) MsgBox(64, '', $s_Message, $i_Seconds) EndFunc ;==>Wait ; Returns file contents As a binary data Func GetFile($s_FileName) Local $oStream = ObjCreate("ADODB.Stream") $oStream.Type = 1 ; Binary $oStream.Open() $oStream.LoadFromFile($s_FileName) Local $d_GetFile = $oStream.Read() $oStream.Close() Return $d_GetFile EndFunc ;==>GetFile ; Converts OLE string To multibyte string Func StringToMB($S) Local $I, $B For $I = 1 To StringLen($S) $B &= StringToBinary(Asc(StringMid($S, $I, 1))) Next Return $B EndFunc ;==>StringToMB ; ******************* upload - end ; ******************* Support ; Basic script info Func InfoEcho() Local $sMsg = _ "Upload file using http And multipart/form-data" & @CRLF & _ "Copyright (C) 2001 Antonin Foller, PSTRUH Software" & @CRLF & _ "use" & @CRLF & _ "[cscript|wscript] fupload.vbs file $s_URL [fieldname]" & @CRLF & _ " file ... Local file To upload" & @CRLF & _ " $s_URL ... $s_URL which can accept uploaded data" & @CRLF & _ " fieldname ... Name of the source form field." & @CRLF & _ @CRLF & CheckRequirements() & @CRLF & _ "" ConsoleWrite('! ' & $sMsg & @CRLF) EndFunc ;==>InfoEcho ; Checks If all of required objects are installed Func CheckRequirements() Local $sMsg = _ "This script requires some objects installed To run properly." & @CRLF & _ CheckOneObject("ADODB.Recordset") & @CRLF & _ CheckOneObject("ADODB.Stream") & @CRLF & _ CheckOneObject("InternetExplorer.Application") & @CRLF & _ "" Return $sMsg ; $sMsgBox $sMsg EndFunc ;==>CheckRequirements ; Checks If the one object is installed. Func CheckOneObject($sClassName) Local $sMsg ObjCreate($sClassName) If @error = 0 Then $sMsg = "OK" Else $sMsg = "Error:" & @error EndIf Return $sClassName & " - " & $sMsg EndFunc ;==>CheckOneObject ; ******************* Support - end ; User's COM error function. Will be called if COM error occurs Func _ErrFunc(ByRef $oError) ; Do anything here. ConsoleWrite(@ScriptName & " (" & $oError.scriptline & ") : ==> COM Error intercepted !" & @CRLF & _ @TAB & "err.number is: " & @TAB & @TAB & "0x" & Hex($oError.number) & @CRLF & _ @TAB & "err.windescription:" & @TAB & $oError.windescription & @CRLF & _ @TAB & "err.description is: " & @TAB & $oError.description & @CRLF & _ @TAB & "err.source is: " & @TAB & @TAB & $oError.source & @CRLF & _ @TAB & "err.helpfile is: " & @TAB & $oError.helpfile & @CRLF & _ @TAB & "err.helpcontext is: " & @TAB & $oError.helpcontext & @CRLF & _ @TAB & "err.lastdllerror is: " & @TAB & $oError.lastdllerror & @CRLF & _ @TAB & "err.scriptline is: " & @TAB & $oError.scriptline & @CRLF & _ @TAB & "err.retcode is: " & @TAB & "0x" & Hex($oError.retcode) & @CRLF & @CRLF) EndFunc ;==>_ErrFunc  
      But I miss something and the code not works as intendend.
      Please join and contribute, in solving this issue, as this will be handy for entire community.
      @mLipok
       
      btw.
      I think that this may be realated to ChrB() which I simply translate to StringToBinary()
      Especialy this :
      StringToBinary(Chr(0))) could be the main issue.
      But for now I'm tired and going to sleep.
      Hope maybe tomorrow somebody solve this issue.
       
    • By Colduction
      Hi again guys!, i had COVID-19 for twice and i couldn't check the forum since 3 or 4 months ago till now! i hope you will get better if you're fighting for beat COVID-19

      I have two question, first is about extracting all of the IP Address from an IP Ranges, for e.g: 192.168.1.1-192.255.255.255 (Start and End are variable and will be defined by the user) and for second one, i have a friend that he is Python programmer, he made a IP Parser that it can support large txt files (1TB) and it can parse all of them under 10min and it also supports low-end PCs that have 1 GB RAM!

      The list that his program parses are:
      #1765497 192.168.1.1 8082 #1765496 192.168.1.1 8084 #1965493 192.168.1.1 8089 #9565495 192.168.1.1 8086 #2565492 192.168.1.1 8081 and it converts very very fast to this:
      192.168.1.1:8082 192.168.1.1:8084 192.168.1.1:8089 192.168.1.1:8086 192.168.1.1:8081 I wonder how to do this via AutoIt, if you can help me in this way, i will be happy✌❤

      Thanks for your helps.

      FIRST_QUESTION_TEST.au3
    • By argumentum
      In the ZIP is the code and the compiled script.
      This is yet another ping the LAN utility.
      Is quite fast, as gathering the info. is forked.
      The Save Note, saves a note for the given MAC ( you may find it handy )
      The Save MACs, saves the listview to an INI file that can be later use for the WakeOnLAN
      Right click will bring a context menu to do stuff. DClick will refresh the Ping.
      That's it. Comes in handy to have in the USB toolbox  
    • By RestrictedUser
      Hello Guys and AutoIt Scriptwriters!🎉❤️
      I've created a script to notify to me if RDP main IP changed then send a message via Telegram bot to me
      But some of my RDP's Main IP are @IPAddress1 or @IPAddress3 or Public IP Address...
      I want to detect automatically the IP that windows client can run RDP to remotely control
      This image can help you that what i say, there are three RDP with specified IP, i want to run script in these RDP's then capture those IP's changes then notify me via Telegram bot

×
×
  • Create New...