Reinhardt1julian Posted February 14, 2013 Share Posted February 14, 2013 Is it possible to put text into an edit, the first part iis Bold and the second part isn't? Link to comment Share on other sites More sharing options...
Moderators Melba23 Posted February 14, 2013 Moderators Share Posted February 14, 2013 Reinhardt1julian,No, you need a RichEdit control for that. Guess where you find out about them. M23 Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind Open spoiler to see my UDFs: Spoiler ArrayMultiColSort ---- Sort arrays on multiple columnsChooseFileFolder ---- Single and multiple selections from specified path treeview listingDate_Time_Convert -- Easily convert date/time formats, including the language usedExtMsgBox --------- A highly customisable replacement for MsgBoxGUIExtender -------- Extend and retract multiple sections within a GUIGUIFrame ---------- Subdivide GUIs into many adjustable framesGUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView itemsGUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeViewMarquee ----------- Scrolling tickertape GUIsNoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxesNotify ------------- Small notifications on the edge of the displayScrollbars ----------Automatically sized scrollbars with a single commandStringSize ---------- Automatically size controls to fit textToast -------------- Small GUIs which pop out of the notification area Link to comment Share on other sites More sharing options...
Reinhardt1julian Posted February 15, 2013 Author Share Posted February 15, 2013 (edited) Ok, I tried to fix this but I took a part of the code from the helpfileexpandcollapse popup#include <GUIConstantsEx.au3> #include <WindowsConstants.au3> #include <EditConstants.au3> #include <StaticConstants.au3> RichEditExample() Func RichEditExample() Local $oRP, $TagsPageC, $AboutC, $PrefsC, $StatC, $GUIActiveX, $msg $oRP = ObjCreate("RICHTEXT.RichtextCtrl.1") GUICreate("Embedded RICHTEXT control Test", 320, 200, -1, -1, BitOR($WS_OVERLAPPEDWINDOW, $WS_CLIPSIBLINGS, $WS_CLIPCHILDREN)) $TagsPageC = GUICtrlCreateLabel('Visit Tags Page', 5, 180, 100, 15, $SS_CENTER) GUICtrlSetFont($TagsPageC, 9, 400, 4) GUICtrlSetColor($TagsPageC, 0x0000ff) GUICtrlSetCursor($TagsPageC, 0) $AboutC = GUICtrlCreateButton('About', 105, 177, 70, 20) $PrefsC = GUICtrlCreateButton('FontSize', 175, 177, 70, 20) $StatC = GUICtrlCreateButton('Plain Style', 245, 177, 70, 20) $GUIActiveX = GUICtrlCreateObj($oRP, 10, 10, 400, 260) GUICtrlSetPos($GUIActiveX, 10, 10, 300, 160) With $oRP; Object tag pool .OLEDrag() .Font = 'Arial' .text = "Hello - Au3 supports ActiveX components like the RICHTEXT thanks to SvenP" & @CRLF & 'Try write some text and quit to reload' ;.FileName = @ScriptDir & '\RichText.rtf' ;.BackColor = 0xff00 EndWith GUISetState();Show GUI While 1 $msg = GUIGetMsg() Select Case $msg = $GUI_EVENT_CLOSE $oRP.SaveFile(@ScriptDir & "\RichText.rtf", 0) ExitLoop Case $msg = $TagsPageC Run(@ComSpec & ' /c start http://www.myplugins.info/guids/typeinfo/typeinfo.php?clsid={3B7C8860-D78F-101B-B9B5-04021C009402}', '', @SW_HIDE) Case $msg = $AboutC $oRP.AboutBox() Case $msg = $PrefsC $oRP.SelFontSize = 12 Case $msg = $StatC $oRP.SelBold = False $oRP.SelItalic = False $oRP.SelUnderline = False $oRP.SelFontSize = 8 EndSelect WEnd GUIDelete() EndFunc ;==>RichEditExampleBut even directly copied from the Helpfile it got the error:==> Only Object-type variables allowed in a "With" statement.: With $oRP With ^ ERROREven if i run the whole code from the Helpfile it runs the Example() FunctionAnd then Gives out the MyError window twice. First and then Whats the Error? i'm not able to fix it. I tried to comment out the with section (in the part of the help file), but then it didn't display any edit at all. And when i click on one of the buttons, it Crashes with the error==> Variable must be of type "Object".: $oRP.AboutBox() $oRP^ ERRORTo se What i want to get in the end i'll provide this code:$Form2 = GUICreate("Plan Creator", 410, 299, -1, -1, BitOr($GUI_SS_DEFAULT_GUI,$WS_MAXIMIZEBOX,$WS_SIZEBOX)) $MenuItem2 = GUICtrlCreateMenu("Datei") $MenuItem4 = GUICtrlCreateMenuItem("Neu", $MenuItem2) $MenuItem3 = GUICtrlCreateMenuItem("Speichern", $MenuItem2) $MenuItem7 = GUICtrlCreateMenuItem("Öffnen", $MenuItem2) $MenuItem8 = GUICtrlCreateMenuItem("Schließen", $MenuItem2) $MenuItem1 = GUICtrlCreateMenu("Termine") $MenuItem6 = GUICtrlCreateMenuItem("Termin hinzufügen", $MenuItem1) $MenuItem5 = GUICtrlCreateMenu("Liste der Messdiener") $MenuItem9 = GUICtrlCreateMenuItem("Anzeigen", $MenuItem5) $MenuItem11 = GUICtrlCreateMenuItem("Exportieren", $MenuItem5) $MenuItem10 = GUICtrlCreateMenuItem("Importieren", $MenuItem5) $mainsize = WinGetClientSize("Plan Creator") Global $Edit1 = GUICtrlCreateEdit("", 8, 8, $mainsize[0] - 15, $mainsize[1] - 15) GUISetState(@SW_SHOW)And all i want is $Edit1 to be with richtext. Edited February 15, 2013 by Reinhardt1julian Link to comment Share on other sites More sharing options...
Moderators Melba23 Posted February 15, 2013 Moderators Share Posted February 15, 2013 Reinhardt1julian,You need to look at the GUIRichEdit UDF - not that very advanced example. This is the page you should be looking at. M23 Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind Open spoiler to see my UDFs: Spoiler ArrayMultiColSort ---- Sort arrays on multiple columnsChooseFileFolder ---- Single and multiple selections from specified path treeview listingDate_Time_Convert -- Easily convert date/time formats, including the language usedExtMsgBox --------- A highly customisable replacement for MsgBoxGUIExtender -------- Extend and retract multiple sections within a GUIGUIFrame ---------- Subdivide GUIs into many adjustable framesGUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView itemsGUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeViewMarquee ----------- Scrolling tickertape GUIsNoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxesNotify ------------- Small notifications on the edge of the displayScrollbars ----------Automatically sized scrollbars with a single commandStringSize ---------- Automatically size controls to fit textToast -------------- Small GUIs which pop out of the notification area Link to comment Share on other sites More sharing options...
Reinhardt1julian Posted February 15, 2013 Author Share Posted February 15, 2013 Thanks! But in that article it isn't said how i can make things in bold. And in the more advanced File, as i described earlier there was a problem with the with thing. And as i understand from that helpfile, You need the with. Link to comment Share on other sites More sharing options...
Moderators Melba23 Posted February 15, 2013 Moderators Share Posted February 15, 2013 Reinhardt1julian, Here is a helper function I wrote some time ago to make using RichEdits a bit easier - they are tricky beasts and I try to avoid them as much as possible. M23 Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind Open spoiler to see my UDFs: Spoiler ArrayMultiColSort ---- Sort arrays on multiple columnsChooseFileFolder ---- Single and multiple selections from specified path treeview listingDate_Time_Convert -- Easily convert date/time formats, including the language usedExtMsgBox --------- A highly customisable replacement for MsgBoxGUIExtender -------- Extend and retract multiple sections within a GUIGUIFrame ---------- Subdivide GUIs into many adjustable framesGUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView itemsGUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeViewMarquee ----------- Scrolling tickertape GUIsNoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxesNotify ------------- Small notifications on the edge of the displayScrollbars ----------Automatically sized scrollbars with a single commandStringSize ---------- Automatically size controls to fit textToast -------------- Small GUIs which pop out of the notification area Link to comment Share on other sites More sharing options...
Reinhardt1julian Posted February 15, 2013 Author Share Posted February 15, 2013 Ok. Now i want to save it. I tried it with this code: Func _speichern() $MyDocsFolder = "::{450D8FBA-AD25-11D0-98A8-0800361B1103}" $wohinexport = FileSaveDialog("Plan Speichern", $MyDocsFolder,"Rich Text Files (*rtf)", 2) _processWindow() _FileCreate($wohinexport & ".rtf") $file5 = FileOpen($wohinexport & ".rtf", 2) $wasinfile = GUICtrlRead($Edit1) FileWrite($wohinexport & ".rtf", $wasinfile) FileClose($file5) GUIDelete($Progressform) EndFunc But that wont work, it'll save a file with only a 0 in it. how can i get the text properly with bold and stuff? Link to comment Share on other sites More sharing options...
Moderators Melba23 Posted February 15, 2013 Moderators Share Posted February 15, 2013 Reinhardt1julian,If you start using UDF functions you normally need to continue using UDF functions - the basic Autoit GUICtrl* functions only work with controls that were created with the native GUICtrlCreate* functions. Can you find a suitable candidate in the _GUICtrlRichEdit_* functions to get the text of the RichEdit control you created with _GUICtrlRichEdit_Create? There is definitely one in there if you look. M23 Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind Open spoiler to see my UDFs: Spoiler ArrayMultiColSort ---- Sort arrays on multiple columnsChooseFileFolder ---- Single and multiple selections from specified path treeview listingDate_Time_Convert -- Easily convert date/time formats, including the language usedExtMsgBox --------- A highly customisable replacement for MsgBoxGUIExtender -------- Extend and retract multiple sections within a GUIGUIFrame ---------- Subdivide GUIs into many adjustable framesGUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView itemsGUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeViewMarquee ----------- Scrolling tickertape GUIsNoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxesNotify ------------- Small notifications on the edge of the displayScrollbars ----------Automatically sized scrollbars with a single commandStringSize ---------- Automatically size controls to fit textToast -------------- Small GUIs which pop out of the notification area Link to comment Share on other sites More sharing options...
Reinhardt1julian Posted February 15, 2013 Author Share Posted February 15, 2013 Didn't know that, thanks! But the Extras are not copied (bold) with the function _GUICtrlRichEdit_GetText And i can't find a better function that would get all the text at once and write it to a file. I want a file, that Microsoft word can read without a problem. Link to comment Share on other sites More sharing options...
Moderators Melba23 Posted February 15, 2013 Moderators Share Posted February 15, 2013 Reinhardt1julian,I have not worked much with RichEdits - as I mentioned above they are tricky things - so I cannot really help a great deal. Looking through the UDF, the _GUICtrlRichEdit_StreamToFile function looks like it might be worth a try - note you must have an .rtf extension to the file. Give it a go and see how you get on - and please let me know as well. M23 Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind Open spoiler to see my UDFs: Spoiler ArrayMultiColSort ---- Sort arrays on multiple columnsChooseFileFolder ---- Single and multiple selections from specified path treeview listingDate_Time_Convert -- Easily convert date/time formats, including the language usedExtMsgBox --------- A highly customisable replacement for MsgBoxGUIExtender -------- Extend and retract multiple sections within a GUIGUIFrame ---------- Subdivide GUIs into many adjustable framesGUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView itemsGUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeViewMarquee ----------- Scrolling tickertape GUIsNoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxesNotify ------------- Small notifications on the edge of the displayScrollbars ----------Automatically sized scrollbars with a single commandStringSize ---------- Automatically size controls to fit textToast -------------- Small GUIs which pop out of the notification area Link to comment Share on other sites More sharing options...
Reinhardt1julian Posted February 15, 2013 Author Share Posted February 15, 2013 (edited) Yes, _GUICtrlRichEdit_StreamToFile works perfectly (at least with a .rtf file, the other one i haven't tried), thaks a lot! It even copies if the text is centered! Ok, now for my final question.. Edited February 15, 2013 by Reinhardt1julian Link to comment Share on other sites More sharing options...
Moderators Melba23 Posted February 15, 2013 Moderators Share Posted February 15, 2013 Reinhardt1julian,Excellent. When you have it all working, please post the script in the "Examples" section as RichEdits are not that well known - as you have found out they are not that easy to work with. M23 Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind Open spoiler to see my UDFs: Spoiler ArrayMultiColSort ---- Sort arrays on multiple columnsChooseFileFolder ---- Single and multiple selections from specified path treeview listingDate_Time_Convert -- Easily convert date/time formats, including the language usedExtMsgBox --------- A highly customisable replacement for MsgBoxGUIExtender -------- Extend and retract multiple sections within a GUIGUIFrame ---------- Subdivide GUIs into many adjustable framesGUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView itemsGUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeViewMarquee ----------- Scrolling tickertape GUIsNoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxesNotify ------------- Small notifications on the edge of the displayScrollbars ----------Automatically sized scrollbars with a single commandStringSize ---------- Automatically size controls to fit textToast -------------- Small GUIs which pop out of the notification area Link to comment Share on other sites More sharing options...
Reinhardt1julian Posted February 15, 2013 Author Share Posted February 15, 2013 (edited) How can i check is a variable contain something? Maybe i searched the wron keyword, but in the helpfile i can't find anything. I want to check if a path (outputtet by FileSaveDialog) already contans a file extention, if not it should add it.EDIT: *Facepalm* Why don't i just google it... Edited February 15, 2013 by Reinhardt1julian Link to comment Share on other sites More sharing options...
Moderators Melba23 Posted February 15, 2013 Moderators Share Posted February 15, 2013 Reinhardt1julian,StringInStr will do that in simple cases: $sPath = "C:\AutoIt\Script" If Not StringInStr($sPath, ".rtf") Then ; If there is NOT ".rtf" in the string $sPath &= ".rtf" ; Add it to the end EndIf MsgBox(0, "Result", $sPath) $sPath = "C:\AutoIt\Script.rtf" If Not StringInStr($sPath, ".rtf") Then $sPath &= ".rtf" EndIf MsgBox(0, "Result", $sPath)It gets more difficult if there is a possibility that there is a wrong extension that needs to be replaced - but that gets into StringRegExp territory and you do not want to go there yet. M23 Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind Open spoiler to see my UDFs: Spoiler ArrayMultiColSort ---- Sort arrays on multiple columnsChooseFileFolder ---- Single and multiple selections from specified path treeview listingDate_Time_Convert -- Easily convert date/time formats, including the language usedExtMsgBox --------- A highly customisable replacement for MsgBoxGUIExtender -------- Extend and retract multiple sections within a GUIGUIFrame ---------- Subdivide GUIs into many adjustable framesGUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView itemsGUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeViewMarquee ----------- Scrolling tickertape GUIsNoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxesNotify ------------- Small notifications on the edge of the displayScrollbars ----------Automatically sized scrollbars with a single commandStringSize ---------- Automatically size controls to fit textToast -------------- Small GUIs which pop out of the notification area Link to comment Share on other sites More sharing options...
Reinhardt1julian Posted February 15, 2013 Author Share Posted February 15, 2013 Ok, thaks a lot! If you want to check it out, here's my example code post: Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now