bolobolo Posted April 5, 2013 Share Posted April 5, 2013 Hi All..I want control checkbox using label.so if $label1 clicked then $checkbox1 = checked thenif $label1 clicked again then $checkbox1= unchecked Link to comment Share on other sites More sharing options...
Moderators Melba23 Posted April 5, 2013 Moderators Share Posted April 5, 2013 bolobolo, Welcome to the AutoIt forum. That sounds not too difficult to script - what code have you tried so far that has not worked? M23 Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind Open spoiler to see my UDFs: Spoiler ArrayMultiColSort ---- Sort arrays on multiple columnsChooseFileFolder ---- Single and multiple selections from specified path treeview listingDate_Time_Convert -- Easily convert date/time formats, including the language usedExtMsgBox --------- A highly customisable replacement for MsgBoxGUIExtender -------- Extend and retract multiple sections within a GUIGUIFrame ---------- Subdivide GUIs into many adjustable framesGUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView itemsGUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeViewMarquee ----------- Scrolling tickertape GUIsNoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxesNotify ------------- Small notifications on the edge of the displayScrollbars ----------Automatically sized scrollbars with a single commandStringSize ---------- Automatically size controls to fit textToast -------------- Small GUIs which pop out of the notification area Link to comment Share on other sites More sharing options...
water Posted April 5, 2013 Share Posted April 5, 2013 Welcome to AutoIt and the forum, Why do you want to click on a label to change the checkbox? And how will the user know that a click on the label changes the checkbox? My UDFs and Tutorials: Spoiler UDFs:Active Directory (NEW 2022-02-19 - Version 1.6.1.0) - Download - General Help & Support - Example Scripts - WikiExcelChart (2017-07-21 - Version 0.4.0.1) - Download - General Help & Support - Example ScriptsOutlookEX (2021-11-16 - Version 1.7.0.0) - Download - General Help & Support - Example Scripts - WikiOutlookEX_GUI (2021-04-13 - Version 1.4.0.0) - DownloadOutlook Tools (2019-07-22 - Version 0.6.0.0) - Download - General Help & Support - WikiPowerPoint (2021-08-31 - Version 1.5.0.0) - Download - General Help & Support - Example Scripts - WikiTask Scheduler (NEW 2022-07-28 - Version 1.6.0.1) - Download - General Help & Support - Wiki Standard UDFs:Excel - Example Scripts - WikiWord - Wiki Tutorials:ADO - WikiWebDriver - Wiki Link to comment Share on other sites More sharing options...
bolobolo Posted April 5, 2013 Author Share Posted April 5, 2013 (edited) i've try this #include <ButtonConstants.au3> #include <GUIConstantsEx.au3> #include <StaticConstants.au3> #include <WindowsConstants.au3> #Region ### START Koda GUI section ### Form= $Form1 = GUICreate("Form1", 239, 155, 302, 218) $Label1 = GUICtrlCreateLabel("Label1", 48, 56, 132, 17) $Checkbox1 = GUICtrlCreateCheckbox("", 32, 56, 17, 17) GUISetState(@SW_SHOW) #EndRegion ### END Koda GUI section ### While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE Exit Case $Label1 If $Label1 <>"" Then GUICtrlSetState($Checkbox1, $GUI_CHECKED) EndSwitch WEnd i want make easier when people want to click checkbox/uncheckbox just click label beside checkbox. Edited April 5, 2013 by bolobolo Link to comment Share on other sites More sharing options...
water Posted April 5, 2013 Share Posted April 5, 2013 This code will always set the checkbox to unchecked because both statements return True. My UDFs and Tutorials: Spoiler UDFs:Active Directory (NEW 2022-02-19 - Version 1.6.1.0) - Download - General Help & Support - Example Scripts - WikiExcelChart (2017-07-21 - Version 0.4.0.1) - Download - General Help & Support - Example ScriptsOutlookEX (2021-11-16 - Version 1.7.0.0) - Download - General Help & Support - Example Scripts - WikiOutlookEX_GUI (2021-04-13 - Version 1.4.0.0) - DownloadOutlook Tools (2019-07-22 - Version 0.6.0.0) - Download - General Help & Support - WikiPowerPoint (2021-08-31 - Version 1.5.0.0) - Download - General Help & Support - Example Scripts - WikiTask Scheduler (NEW 2022-07-28 - Version 1.6.0.1) - Download - General Help & Support - Wiki Standard UDFs:Excel - Example Scripts - WikiWord - Wiki Tutorials:ADO - WikiWebDriver - Wiki Link to comment Share on other sites More sharing options...
bolobolo Posted April 5, 2013 Author Share Posted April 5, 2013 (edited) This code will always set the checkbox to unchecked because both statements return True.Yea, I've tried any code but no success.please help me solve my code Edited April 5, 2013 by bolobolo Link to comment Share on other sites More sharing options...
MyEarth Posted April 5, 2013 Share Posted April 5, 2013 (edited) It's the second time you open a thread for the same reason... #include <ButtonConstants.au3> #include <GUIConstantsEx.au3> #include <StaticConstants.au3> #include <WindowsConstants.au3> $Form1 = GUICreate("Form1", 211, 49, 225, 174) $Label1 = GUICtrlCreateLabel("Check", 8, 16, 36, 17) $Checkbox1 = GUICtrlCreateCheckbox("", 56, 16, 97, 17) GUISetState(@SW_SHOW) While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE Exit Case $Label1 If BitAnd(GUICtrlRead($Checkbox1), $GUI_UNCHECKED) Then GUICtrlSetState($Checkbox1, $GUI_CHECKED) Else GUICtrlSetState($Checkbox1, $GUI_UNCHECKED) EndIf EndSwitch WEnd Edited April 5, 2013 by MyEarth Link to comment Share on other sites More sharing options...
Moderators Melba23 Posted April 5, 2013 Moderators Share Posted April 5, 2013 bolobolo, You just need to ask the right question: #include <GUIConstantsEx.au3> $Form1 = GUICreate("Form1", 239, 155, 302, 218) $Label1 = GUICtrlCreateLabel("Label1", 48, 56, 132, 17) $Checkbox1 = GUICtrlCreateCheckbox("", 32, 56, 17, 17) GUISetState(@SW_SHOW) While 1 Switch GUIGetMsg() Case $GUI_EVENT_CLOSE Exit Case $Label1 ; See if the checkbox is checked If GUICtrlRead($Checkbox1) = 1 Then ; It is so uncheck it GUICtrlSetState($Checkbox1, $GUI_UNCHECKED) Else ; It is not so check it GUICtrlSetState($Checkbox1, $GUI_CHECKED) EndIf EndSwitch WEnd All clear? M23 Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind Open spoiler to see my UDFs: Spoiler ArrayMultiColSort ---- Sort arrays on multiple columnsChooseFileFolder ---- Single and multiple selections from specified path treeview listingDate_Time_Convert -- Easily convert date/time formats, including the language usedExtMsgBox --------- A highly customisable replacement for MsgBoxGUIExtender -------- Extend and retract multiple sections within a GUIGUIFrame ---------- Subdivide GUIs into many adjustable framesGUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView itemsGUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeViewMarquee ----------- Scrolling tickertape GUIsNoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxesNotify ------------- Small notifications on the edge of the displayScrollbars ----------Automatically sized scrollbars with a single commandStringSize ---------- Automatically size controls to fit textToast -------------- Small GUIs which pop out of the notification area Link to comment Share on other sites More sharing options...
MyEarth Posted April 5, 2013 Share Posted April 5, 2013 Wow, i was faster then Melba I'll remember this day lifetime Link to comment Share on other sites More sharing options...
Moderators Melba23 Posted April 5, 2013 Moderators Share Posted April 5, 2013 MyEarth, Well done! But please remember it is not a race. M23 Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind Open spoiler to see my UDFs: Spoiler ArrayMultiColSort ---- Sort arrays on multiple columnsChooseFileFolder ---- Single and multiple selections from specified path treeview listingDate_Time_Convert -- Easily convert date/time formats, including the language usedExtMsgBox --------- A highly customisable replacement for MsgBoxGUIExtender -------- Extend and retract multiple sections within a GUIGUIFrame ---------- Subdivide GUIs into many adjustable framesGUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView itemsGUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeViewMarquee ----------- Scrolling tickertape GUIsNoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxesNotify ------------- Small notifications on the edge of the displayScrollbars ----------Automatically sized scrollbars with a single commandStringSize ---------- Automatically size controls to fit textToast -------------- Small GUIs which pop out of the notification area Link to comment Share on other sites More sharing options...
MyEarth Posted April 5, 2013 Share Posted April 5, 2013 Yeah i know, was just a joke and a compliment because you are always quick to respond on many arguments Link to comment Share on other sites More sharing options...
bolobolo Posted April 5, 2013 Author Share Posted April 5, 2013 bolobolo, You just need to ask the right question: #include <GUIConstantsEx.au3> $Form1 = GUICreate("Form1", 239, 155, 302, 218) $Label1 = GUICtrlCreateLabel("Label1", 48, 56, 132, 17) $Checkbox1 = GUICtrlCreateCheckbox("", 32, 56, 17, 17) GUISetState(@SW_SHOW) While 1 Switch GUIGetMsg() Case $GUI_EVENT_CLOSE Exit Case $Label1 ; See if the checkbox is checked If GUICtrlRead($Checkbox1) = 1 Then ; It is so uncheck it GUICtrlSetState($Checkbox1, $GUI_UNCHECKED) Else ; It is not so check it GUICtrlSetState($Checkbox1, $GUI_CHECKED) EndIf EndSwitch WEnd All clear? M23 OMG Thank you very much @Melba23 and anyone who helped me your code is works.. Link to comment Share on other sites More sharing options...
Moderators Melba23 Posted April 5, 2013 Moderators Share Posted April 5, 2013 bolobolo,Glad MyEarth and I could help. M23P.S. When you reply, please use the "Reply to this topic" button at the top of the thread or the "Reply to this topic" editor at the bottom rather than the "Quote" button - I know what I wrote and it just pads the thread unneccessarily. Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind Open spoiler to see my UDFs: Spoiler ArrayMultiColSort ---- Sort arrays on multiple columnsChooseFileFolder ---- Single and multiple selections from specified path treeview listingDate_Time_Convert -- Easily convert date/time formats, including the language usedExtMsgBox --------- A highly customisable replacement for MsgBoxGUIExtender -------- Extend and retract multiple sections within a GUIGUIFrame ---------- Subdivide GUIs into many adjustable framesGUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView itemsGUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeViewMarquee ----------- Scrolling tickertape GUIsNoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxesNotify ------------- Small notifications on the edge of the displayScrollbars ----------Automatically sized scrollbars with a single commandStringSize ---------- Automatically size controls to fit textToast -------------- Small GUIs which pop out of the notification area Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now