Jump to content
Sign in to follow this  
jaberwacky

Mouse Wrap [02/13/2015]

Recommended Posts

This script is intended to allow the user to move their mouse to the edge of their screen and have the mouse appear to the opposite end. 

When the user drags the mouse to the edge of a monitor there is a 300 millisecond delay before the mouse will wrap.  This will give the user some time to change their mind and give some time for the taskbar to open if the user has it set to autohide. 

When the user drags a window or selection rectangle to the edge of a monitor the user will have 700 milliseconds to take advantage of the Windows 7 Snap feature.  If the user has not moved the mouse from the edge within that time then the window will move to the opposite edge. 

When the user holds down the mouse wheel the wrap effect is disabled.

Tested on Windows 7 x64 with two monitors placed horizontally.

Updates:

[02/13/2015] Finally got around to fixing this.

[05/25/2013] User may now disable the effect on the left, right, top, and or bottom edges.  User may also change the hover and snap times for each edge.  These options are available through the 'Options' tray menu.

MouseWrap.zip - Source works on latest AutoIt beta.  Includes an exe.

downloads: 197

Edited by jaberwacky

Share this post


Link to post
Share on other sites

But I crave wishy washy! Nice code and pretty awesome I'm credited!


UDF List:

 
_AdapterConnections()_AlwaysRun()_AppMon()_AppMonEx()_ArrayFilter/_ArrayReduce_BinaryBin()_CheckMsgBox()_CmdLineRaw()_ContextMenu()_ConvertLHWebColor()/_ConvertSHWebColor()_DesktopDimensions()_DisplayPassword()_DotNet_Load()/_DotNet_Unload()_Fibonacci()_FileCompare()_FileCompareContents()_FileNameByHandle()_FilePrefix/SRE()_FindInFile()_GetBackgroundColor()/_SetBackgroundColor()_GetConrolID()_GetCtrlClass()_GetDirectoryFormat()_GetDriveMediaType()_GetFilename()/_GetFilenameExt()_GetHardwareID()_GetIP()_GetIP_Country()_GetOSLanguage()_GetSavedSource()_GetStringSize()_GetSystemPaths()_GetURLImage()_GIFImage()_GoogleWeather()_GUICtrlCreateGroup()_GUICtrlListBox_CreateArray()_GUICtrlListView_CreateArray()_GUICtrlListView_SaveCSV()_GUICtrlListView_SaveHTML()_GUICtrlListView_SaveTxt()_GUICtrlListView_SaveXML()_GUICtrlMenu_Recent()_GUICtrlMenu_SetItemImage()_GUICtrlTreeView_CreateArray()_GUIDisable()_GUIImageList_SetIconFromHandle()_GUIRegisterMsg()_GUISetIcon()_Icon_Clear()/_Icon_Set()_IdleTime()_InetGet()_InetGetGUI()_InetGetProgress()_IPDetails()_IsFileOlder()_IsGUID()_IsHex()_IsPalindrome()_IsRegKey()_IsStringRegExp()_IsSystemDrive()_IsUPX()_IsValidType()_IsWebColor()_Language()_Log()_MicrosoftInternetConnectivity()_MSDNDataType()_PathFull/GetRelative/Split()_PathSplitEx()_PrintFromArray()_ProgressSetMarquee()_ReDim()_RockPaperScissors()/_RockPaperScissorsLizardSpock()_ScrollingCredits_SelfDelete()_SelfRename()_SelfUpdate()_SendTo()_ShellAll()_ShellFile()_ShellFolder()_SingletonHWID()_SingletonPID()_Startup()_StringCompact()_StringIsValid()_StringRegExpMetaCharacters()_StringReplaceWholeWord()_StringStripChars()_Temperature()_TrialPeriod()_UKToUSDate()/_USToUKDate()_WinAPI_Create_CTL_CODE()_WinAPI_CreateGUID()_WMIDateStringToDate()/_DateToWMIDateString()Au3 script parsingAutoIt SearchAutoIt3 PortableAutoIt3WrapperToPragmaAutoItWinGetTitle()/AutoItWinSetTitle()CodingDirToHTML5FileInstallrFileReadLastChars()GeoIP databaseGUI - Only Close ButtonGUI ExamplesGUICtrlDeleteImage()GUICtrlGetBkColor()GUICtrlGetStyle()GUIEventsGUIGetBkColor()Int_Parse() & Int_TryParse()IsISBN()LockFile()Mapping CtrlIDsOOP in AutoItParseHeadersToSciTE()PasswordValidPasteBinPosts Per DayPreExpandProtect GlobalsQueue()Resource UpdateResourcesExSciTE JumpSettings INISHELLHOOKShunting-YardSignature CreatorStack()Stopwatch()StringAddLF()/StringStripLF()StringEOLToCRLF()VSCROLLWM_COPYDATAMore Examples...

Updated: 22/04/2018

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By MrCreatoR
      This UDF allows to set an events handler for Mouse device.
       
      The beginning...
      I searched for a way to disable the Mouse Primary click, and be able to call some function when the click event is received...
      Big thanks to amel27 for this one, i only organized the whole stuff to UDF style.
       
      Example:
      #include <GUIConstantsEx.au3> #include "MouseOnEvent.au3" HotKeySet("{ESC}", "_Quit") _Example_Intro() _Example_Limit_Window() Func _Example_Intro() MsgBox(64, "Attention!", "Let's set event function for mouse wheel *scrolling* up and down", 5) ;Set event function for mouse wheel *scrolling* up/down and primary button *down* action (call our function when the events recieved) _MouseSetOnEvent($MOUSE_WHEELSCROLLDOWN_EVENT, "_MouseWheel_Events") _MouseSetOnEvent($MOUSE_WHEELSCROLLUP_EVENT, "_MouseWheel_Events") _MouseSetOnEvent($MOUSE_PRIMARYDOWN_EVENT, "_MousePrimaryDown_Event") Sleep(3000) ;UnSet the events _MouseSetOnEvent($MOUSE_WHEELSCROLLDOWN_EVENT) _MouseSetOnEvent($MOUSE_WHEELSCROLLUP_EVENT) _MouseSetOnEvent($MOUSE_PRIMARYDOWN_EVENT) ToolTip("") MsgBox(64, "Attention!", "Now let's disable Secondary mouse button up action, and call our event function.", 5) _MouseSetOnEvent($MOUSE_SECONDARYUP_EVENT, "_MouseSecondaryUp_Event", 0, 1) Sleep(5000) _MouseSetOnEvent($MOUSE_SECONDARYUP_EVENT) ToolTip("") EndFunc Func _Example_Limit_Window() Local $hGUI = GUICreate("MouseOnEvent UDF Example - Restrict events on specific window") GUICtrlCreateLabel("Try to click on that specific GUI window", 40, 40, 300, 30) GUICtrlSetFont(-1, 12, 800) GUICtrlCreateLabel("Press <ESC> to exit", 10, 10) GUISetState() _MouseSetOnEvent($MOUSE_PRIMARYDOWN_EVENT, "_MousePrimaryDown_Event", $hGUI) ;A little(?) bugie when you mix different events :( ;_MouseSetOnEvent($MOUSE_SECONDARYUP_EVENT, "_MouseSecondaryUp_Event", $hGUI) While 1 Switch GUIGetMsg() Case $GUI_EVENT_CLOSE ExitLoop Case $GUI_EVENT_PRIMARYDOWN MsgBox(0, "", "Should not be shown ;)") EndSwitch WEnd _MouseSetOnEvent($MOUSE_PRIMARYDOWN_EVENT) ;_MouseSetOnEvent($MOUSE_SECONDARYUP_EVENT) EndFunc Func _MouseWheel_Events($iEvent) Switch $iEvent Case $MOUSE_WHEELSCROLLDOWN_EVENT ToolTip("Wheel Mouse Button (scrolling) DOWN Blocked") Case $MOUSE_WHEELSCROLLUP_EVENT ToolTip("Wheel Mouse Button (scrolling) UP Blocked") EndSwitch Return $MOE_BLOCKDEFPROC ;Block EndFunc Func _MousePrimaryDown_Event() ToolTip("Primary Mouse Button Down Blocked") Return $MOE_BLOCKDEFPROC ;Block EndFunc Func _MouseSecondaryUp_Event() ToolTip("Secondary Mouse Button Up Blocked") EndFunc Func _Quit() Exit EndFunc  
      Available Events Constants:
       
      ------------------------------------------
      CHANGELOG:
      Download:
      Attached:     MouseOnEvent_2.4.zip
      Old version:
      MouseOnEvent.zip - v2.3
      MouseOnEvent_2.1.zip
      MouseOnEvent_2.0.zip
      MouseOnEvent_UDF_1.9.zip
      MouseSetOnEvent_UDF_1.8.zip
      MouseSetOnEvent_UDF_1.7.zip
      MouseSetOnEvent_UDF_1.6.zip
      MouseSetOnEvent_UDF_1.5.zip
      MouseSetOnEvent_UDF_1.4.zip
      MouseSetOnEvent_UDF_1.3.zip
      Previous downloads: 146 + 200 + 804
      MouseOnEvent.zip
      MouseOnEvent.zip
    • By CarlD
      Update: Download the latest version here.
      As my first stab at GUI scripting, I'm trying to write a simple graphical interface for Grep for Windows. I have a basic GUI, but I'm stuck on one point and nothing I've tried so far works. The sticking point is that while the Tab key works to move focus from one input control to the next, clicking the mouse on any but the first input does nothing. This seems like a basic feature of GUI functionality that should work out of the box (like Tab), but clearly I'm missing something. I tried (among many other things) Melba23's technique in the post below, but this doesn't do what I'm after -- getting the left click to set the insertion point for user input. Would greatly appreciate a pointer or two. 😉
      Here's my code so far:
      ; Grep for Windows -- GUI [CLD] #include <AutoItConstants.au3> #include <GUIConstantsEx.au3> #include <StaticConstants.au3> #include <WinAPI.au3> #include <WindowsConstants.au3> Opt("WinTitleMatchMode", -2) #cs FileInstall("X:\nix\search1.ico", @TempDir & "\search1.ico") FileInstall("X:\nix\grep.exe", @TempDir & "\grep.exe") FileInstall("X:\nix\sed.exe", @TempDir & "\sed.exe") FileInstall("X:\nix\libiconv2.dll", @TempDir & "\libiconv2.dll") FileInstall("X:\nix\libintl3.dll", @TempDir & "\libintl3.dll") FileInstall("X:\nix\pcre3.dll", @TempDir & "\pcre3.dll") FileInstall("X:\nix\regex2.dll", @TempDir & "\regex2.dll") #ce ; $sDefFs = @ScriptDir & "\.txt" $sOut = "" $iX = 20 $iY = 20 $hgGGrep = GUICreate("Grep for Windows: Simple TeXT search", 600, 600) GUISetState(@SW_SHOW, $hgGGrep) ; Obtain value of control: GUICtrlRead() ; left, top, width, height ; $iX, $iY, $iX + n, $iY + m ; $hgIco = GUICtrlCreateIcon(@ScriptDir & "\search1.ico", $iX, $iY, 10) $hgGL0 = GUICtrlCreateLabel("Enter a string or regular expression" & @CRLF & "(space between words means ""OR"")", $iX + 50, $iY, 250, 30) $hgSch = GUICtrlCreateInput("", $iX + 50, $iY + 40, 325, 20, $GUI_SS_DEFAULT_INPUT, -1) $hgXyZ = GUICtrlCreateCheckbox("cAsE-sEnSiTiVe", $iX + 50, $iY + 65, -1, -1) $hgExe = GUICtrlCreateButton("Search", 400, $iY + 40, -1, -1) $hgFL1 = GUICtrlCreateLabel("Filespec", $iX + 50, $iY + 100, 250, 20) $hgFs1 = GUICtrlCreateInput("d:\path\*.txt", $iX + 110, $iY + 100, 250, 20, $GUI_SS_DEFAULT_INPUT, -1) $hgFL2 = GUICtrlCreateLabel("Filespec", $iX + 50, $iY + 120, 250, 20) $hgFs2 = GUICtrlCreateInput("", $iX + 110, $iY + 120, 250, 20, $GUI_SS_DEFAULT_INPUT, -1) $hgFL3 = GUICtrlCreateLabel("Filespec", $iX + 50, $iY + 140, 250, 20) $hgFs3 = GUICtrlCreateInput("", $iX + 110, $iY + 140, 250, 20, $GUI_SS_DEFAULT_INPUT,-1) $hgOut = GUICtrlCreateEdit($sOut, 25, 190, 550, 400, $ES_LEFT, -1) GUICtrlSetState($hgSch, $GUI_FOCUS) While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE Exit EndSwitch WEnd ; #cs _WinAPI_SetFocus(ControlGetHandle("Grep for Windows", "", $hgSch)) _WinAPI_SetFocus(ControlGetHandle("Grep for Windows", "", $hgFs1)) _WinAPI_SetFocus(ControlGetHandle("Grep for Windows", "", $hgFs2)) _WinAPI_SetFocus(ControlGetHandle("Grep for Windows", "", $hgFs3)) #ce Thanks in advance.
    • By WoodGrain
      Hi guys,
       
      I've written a script that will move my mouse to a location on the screen whenever my remote access software becomes active, the problem I have is that as soon as the remote access software becomes active it appears to capture the mouse and keyboard so nothing happens when I use MouseMove().
       
      Is there any way around this?
       
      Thanks!
    • By badcoder123
      Hey, all.  
      I've been looking for a way to change cursor colour but not the cursor itself. I've been looking for a couple hours now and can't find anything.  I also don't even know where to start, if anyone has any tips or examples please comment them.
      Thanks
×
×
  • Create New...