robismyname Posted May 23, 2013 Share Posted May 23, 2013 (edited) Im trying to select the ok button for a warning message that comes up during a test via mousemove/mouseclick feature in autoit. So the autoit code does something like this: If GUICtrlRead($GSM850)=1 Then If $EMP = False Then RUNWAIT($QDir&"NoiseProfilingTool.exe HP_GSM_850.xml run") so it runs this .exe program called noiseprofilingtool and then looks for a xml file on my C drive that has all the configuration info needed to run the test in the GUI. The issue is that the warning window that I wish to press the ok button on occurs when the script initiates noiseprofilingtool.exe. So my point is that I cant place mousemove/mouseclick feature before or after the autoscript code line because the autoscript code initiated the .exe program so until the .exe program is completed the next line of autoit code will not be executed! So i was thinking that I could add the autoit code movemouse/click that I need to press the ok button in the warning window within the .exe program in the XML file but im not sure where to put it. THE XML FILE is below. CAn someone tell me where to place the autoit code for mousemove/mouse click in the XML file? not sure if this is possible..... <root> <VersionConfig> <ConfigFileVersion>3.6</ConfigFileVersion> </VersionConfig> <TargetConfig> <!-- TargetType; 0=MSM/MDM, 1=APQ --> <TargetType>0</TargetType> </TargetConfig> <ModeList> <Mode> <ModeName>GSM</ModeName> <SampleNum>1</SampleNum> <ChartMinPower>-120</ChartMinPower> <ChartMaxPower>-60</ChartMaxPower> <SigGenPowerLevel>-85</SigGenPowerLevel> <SigGenFreqOffset>50</SigGenFreqOffset> <Diversity>FALSE</Diversity> <CheckSynthLock>TRUE</CheckSynthLock> <LNARange0>TRUE</LNARange0> <LNARange1>FALSE</LNARange1> <LNARange2>FALSE</LNARange2> <LNARange3>FALSE</LNARange3> <LNARange4>FALSE</LNARange4> <ChanStep>1</ChanStep> <TxOn>FALSE</TxOn> <TxPower>30</TxPower> <WarnIfCalChannelsNotFoundInNV>TRUE</WarnIfCalChannelsNotFoundInNV> <BCList> <BCNode> <BandClass>CELL-850</BandClass> <ChannelList>128,251</ChannelList> <DefaultRxCalChannels>128,145,163,180,198,215,233,251</DefaultRxCalChannels> </BCNode> <BCNode> <BandClass>E-GSM-900</BandClass> <ChannelList>975,1023;0,124</ChannelList> <DefaultRxCalChannels>1,31,62,92,124,975,1000,1023</DefaultRxCalChannels> </BCNode> <BCNode> <BandClass>DCS-1800</BandClass> <ChannelList>512,885</ChannelList> <DefaultRxCalChannels>512,537,562,587,612,637,662,687,712,737,762,787,812,837,862,885</DefaultRxCalChannels> </BCNode> <BCNode> <BandClass>PCS-1900</BandClass> <ChannelList>512,810</ChannelList> <DefaultRxCalChannels>512,532,552,572,592,612,632,652,672,692,712,732,752,772,792,810</DefaultRxCalChannels> </BCNode> </BCList> </Mode> </ModeList> <SigGenModelList> <SigGenModel> <Name>CTSTI_SG_HPE4438C</Name> </SigGenModel> <SigGenModel> <Name>CTSTI_SG_HPE4432B</Name> </SigGenModel> <SigGenModel> <Name>CTSTI_SG_HPE8247C</Name> </SigGenModel> <SigGenModel> <Name>CTSTI_SG_HP83712B</Name> </SigGenModel> <SigGenModel> <Name>CTSTI_SG_HP8664A</Name> </SigGenModel> <SigGenModel> <Name>CTSTI_SG_ESG3000</Name> </SigGenModel> <SigGenModel> <Name>CTSTI_SG_HP8960</Name> </SigGenModel> <SigGenModel> <Name>CTSTI_SG_MARC2024</Name> </SigGenModel> <SigGenModel> <Name>CTSTI_SG_MARC2026</Name> </SigGenModel> <SigGenModel> <Name>CTSTI_SG_MARC2031</Name> </SigGenModel> <SigGenModel> <Name>CTSTI_SG_RSSMU200</Name> </SigGenModel> <SigGenModel> <Name>CTSTI_SG_MG3700A</Name> </SigGenModel> <SigGenModel> <Name>CTSTI_SG_RSSFU</Name> </SigGenModel> <SigGenModel> <Name>CTSTI_SG_RSSMIQ03B</Name> </SigGenModel> </SigGenModelList> <TestInstConfig> <GpibAddr>19</GpibAddr> <!-- valid values for CalRoutine are OFF = 0, CONDUCTED = 1, RADIATED = 2 --> <CalRoutine>0</CalRoutine> <CalRoutineGPS_ToneSearchWindowSize_Hz>4000</CalRoutineGPS_ToneSearchWindowSize_Hz> </TestInstConfig> <TChartSeriesColorList> <GPS_GOBI>255,0,0</GPS_GOBI> <LNA0_RX0>255,0,0</LNA0_RX0> <LNA0_RX1>0,0,255</LNA0_RX1> <LNA1_RX0>255,0,192</LNA1_RX0> <LNA1_RX1>0,192,192</LNA1_RX1> <LNA2_RX0>255,160,0</LNA2_RX0> <LNA2_RX1>0,255,255</LNA2_RX1> <LNA3_RX0>255,255,0</LNA3_RX0> <LNA3_RX1>0,255,0</LNA3_RX1> <LNA4_RX0>255,176,238</LNA4_RX0> <LNA4_RX1>192,192,255</LNA4_RX1> <Limit_RX0>255,160,0</Limit_RX0> <Limit_RX1>0,255,0</Limit_RX1> <Parent_RX0>255,160,0</Parent_RX0> <Parent_RX1>0,255,0</Parent_RX1> </TChartSeriesColorList> <TemperatureIndex> <!-- valid values for RoomTempIndex are 0 to 7 --> <RoomTempIndex>3</RoomTempIndex> </TemperatureIndex> <AdcLogging> <GetNVTHERM>FALSE</GetNVTHERM> <AdcChannels></AdcChannels> <AdcChanLabel></AdcChanLabel> </AdcLogging> <GsmTxConfig> <!-- valid values for BurstVsContinuous are BURST_MODE = 0, CONTINUOUS_MODE = 1 --> <BurstVsContinuous>1</BurstVsContinuous> <!-- TSC is Training Sequence Code for test set synchronization, valid values for TSCindex are 0 to 255 --> <TSCindex>4</TSCindex> <!-- iModScheme = Modulation Code Scheme; 0=MCS1, 1=MCS2, to 8=MCS9 --> <ModScheme>8</ModScheme> <!-- TX can be enabled/disabled for each of the 8 time slots below; 0 = OFF, 1 = ON --> <TxSlot0>1</TxSlot0> <TxSlot1>0</TxSlot1> <TxSlot2>1</TxSlot2> <TxSlot3>0</TxSlot3> <TxSlot4>1</TxSlot4> <TxSlot5>0</TxSlot5> <TxSlot6>1</TxSlot6> <TxSlot7>0</TxSlot7> </GsmTxConfig> <GsmRxConfig> <!-- RxAPI; 0=LegacyGetRSSI, 1=NewGetRxLevelDBM --> <RxAPI>0</RxAPI> <!-- NumAvgByDUT; # of averages internal to the Device Under Test for each NPT sample when RxAPI=NewGetRxLevelDBM --> <NumAvgByDUT>1</NumAvgByDUT> </GsmRxConfig> <WcdmaConfig> <!-- AutoDetermineAgcScale; if TRUE, then NPT will automatically determine AGC scaling; if FALSE then one can specify the AGC scaling with the subsequent items --> <AutoDetermineAgcScale>TRUE</AutoDetermineAgcScale> <RxAgcUnitsPerDB>10</RxAgcUnitsPerDB> <MinRSSIofInterest>-106</MinRSSIofInterest> <TxAgcUnitsPerDB>10</TxAgcUnitsPerDB> <TxMinPower>-70.0</TxMinPower> <!-- TxPowerMethod; 0=SetPdm, 1=SetTxAGC, 2=SetTxDBM --> <TxPowerMethod>2</TxPowerMethod> <!-- RxAPI; 0=LegacyGetRxAGC, 1=NewGetRxLevelDBM --> <RxAPI>0</RxAPI> </WcdmaConfig> <CDMA2000Config> <!-- TxPowerMethod; 0=SetPdm, 2=SetTxDBM --> <TxPowerMethod>2</TxPowerMethod> <!-- RxAPI; 0=LegacyGetRxAGC, 1=NewGetRxLevelDBM --> <RxAPI>0</RxAPI> </CDMA2000Config> <LTEConfig> <!-- DiversityConfigLTE; 0=Get both RX0 AND RX1 data when Diversity is selected, 1=Get ONLY RX1 data when Diversity is selected --> <DiversityConfigLTE>1</DiversityConfigLTE> <!-- TxBandwidth; 0=1.4MHz, 1=3MHz, 2=5MHz, 3=10MHz, 4=15MHz, 5=20MHz, 255=Match RX BW --> <TxBandwidth>255</TxBandwidth> <!-- TxWaveform; 0=CW, 1=PUSCH, 2=PUCCH, 3=PRACH, 4=SRS, 5=UpPTS --> <TxWaveform>0</TxWaveform> <!-- numRBsPUSCH = Number of UL resource blocks to transmit on the PUSCH --> <numRBsPUSCH>0</numRBsPUSCH> <!-- numRBsPUCCH = Number of UL resource blocks to transmit on the PUCCH --> <numRBsPUCCH>0</numRBsPUCCH> <!-- PUSCHStartRBIndex = Starting resource block index on the PUSCH --> <PUSCHStartRBIndex>0</PUSCHStartRBIndex> <!-- TxPowerMethod; 0=SetPdm, 2=SetTxDBM --> <TxPowerMethod>2</TxPowerMethod> </LTEConfig> <GPSConfig> <!-- FIELDS BELOW RELATED TO ExtLnaState APPLY ONLY TO GPS_GEN8 --> <!-- ForceExtLnaState determines whether we leave the EXTERNAL LNA state as is, or force it ON|OFF --> <ForceExtLnaState>TRUE</ForceExtLnaState> <!-- when ForceExtLnaState=TRUE, then ExtLnaState determines the EXTERNAL LNA ON|OFF state --> <ExtLnaState>ON</ExtLnaState> <!-- set the timeout (in seconds) for the collection of GPS IQ data --> <IQtimeout>90</IQtimeout> </GPSConfig> <LimitTestingConfig> <!-- valid values for LimitTestingMethod are OFF = 0, LIMIT_LINE = 1, PARENT_CHILD_DELTA = 2 --> <LimitTestingMethod>0</LimitTestingMethod> <ParentFile>Paste filename of Parent data here</ParentFile> <LimitLineRx0>-95.0</LimitLineRx0> <LimitLineRx1>-95.0</LimitLineRx1> <DeltaLimitRx0>5.0</DeltaLimitRx0> <DeltaLimitRx1>5.0</DeltaLimitRx1> </LimitTestingConfig> <DataLogOptions> <SampleNum>1</SampleNum> <!-- StartDelay; units are seconds. delay before test begins --> <StartDelay>0</StartDelay> <!-- SetupDelay; units are ms. must be integer. delay between setup and first rssi sample --> <SetupDelay>10</SetupDelay> <ComPort>7</ComPort> <UseQpstServer>FALSE</UseQpstServer> <OnlineModeOnExit>FALSE</OnlineModeOnExit> <FilenamePrefix></FilenamePrefix> <FilenameSuffix></FilenameSuffix> <FolderName>C:TempNPT</FolderName> <Silent>FALSE</Silent> </DataLogOptions> </root> Edited May 23, 2013 by Melba23 Added spoiler to reduce post size Link to comment Share on other sites More sharing options...
Moderators Melba23 Posted May 23, 2013 Moderators Share Posted May 23, 2013 robismyname, Welcome to the AutoIt forums. I have moved this question to the "General Help" section where it is more suited. As a quick answer, I do not believe that you will be able to able to put the AutoIt code in the XML file. But what you could do is use Run to start your app and then wait for the popup and deal with it. You should be able to identify the subsequent closure of the app using ProcessExists or WinExists in a loop and then continue with the script. M23 Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind Open spoiler to see my UDFs: Spoiler ArrayMultiColSort ---- Sort arrays on multiple columnsChooseFileFolder ---- Single and multiple selections from specified path treeview listingDate_Time_Convert -- Easily convert date/time formats, including the language usedExtMsgBox --------- A highly customisable replacement for MsgBoxGUIExtender -------- Extend and retract multiple sections within a GUIGUIFrame ---------- Subdivide GUIs into many adjustable framesGUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView itemsGUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeViewMarquee ----------- Scrolling tickertape GUIsNoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxesNotify ------------- Small notifications on the edge of the displayScrollbars ----------Automatically sized scrollbars with a single commandStringSize ---------- Automatically size controls to fit textToast -------------- Small GUIs which pop out of the notification area Link to comment Share on other sites More sharing options...
jdelaney Posted May 23, 2013 Share Posted May 23, 2013 (edited) Use run, not runwait...then you can get/interact with the window...no need to add to the xml. Edited May 23, 2013 by jdelaney IEbyXPATH-Grab IE DOM objects by XPATH IEscriptRecord-Makings of an IE script recorder ExcelFromXML-Create Excel docs without excel installed GetAllWindowControls-Output all control data on a given window. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now