Jump to content

CopyDirScript

Karl1983

By Karl1983,
in AutoIt Example Scripts

 Share

Recommended Posts

Karl1983 Seeker

Karl1983

Posted
Posted (edited)

Hey all

I am new to development. What I am sharing here is a first cut draft of a programme to copy files which I am writing to build up my skills (no real other purpose).

Some parts are not yet complete but are in working order. By this I mean that they need to be enhanced to provide better functionality/features and less risk of not doing what you want.

I will update as I make changes but thought I would share now in case the current version is of use. 

I am not expecting anyone else to do any work on this but at the same time as this seems like a community for people helping and building up so if people want to contribute feel free and you will of course have the appropriate mention

I am considering this an alpha release on the basis that whilst it functions it is not yet complete. Before I work on the missing features I will look to optimise the code as I am sure I am writing things in a long winded and illogical way to some extent (not to mention messy). So feel free to offer constructive criticism.

Programme Name: DirCopier
Version: V0.1 (alpha)
Author: Karl Griffiths
Description: This programme will copy files from one location to another. It will replace all files with the same name in the destination folder currently. It has a very basis check function which compares the size of the source and destination folders to see if they match in size, it uses this same logic to confirm when copy is complete. It creates a CSV file in the same location as the compiled script and uses this to store the last used source and destination locations incase you want to use it as a regular back up tool.
Further Development: See script
Special thanks: Wayfarer, Universalist
 
#include <ButtonConstants.au3>
#include <EditConstants.au3>
#include <GUIConstantsEx.au3>
#include <ProgressConstants.au3>
#include <StaticConstants.au3>
#include <WindowsConstants.au3>
#Include<Array.au3>
#include<file.au3>


;### Programme Name: DirCopier
;### Version: V0.1 (alpha)
;### Author: Karl Griffiths
;### Description: This programme will copy files from one location to another. It will replace all files
;### with the same name in the destination folder currently. It has a very basis check
;### function which compares the size of the source and destination folders to see if they  
;### match in size, it uses this same logic to confirm when copy is complete. It creates
;### a CSV file in the same location as the compiled script and uses this to store the 
;### last used source and destination locations incase you want to use it as a regular back up tool.                
;### Further Development: See script
;### Special thanks: Wayfarer, Universalist                                             

Global $srcbutton, $destbutton, $src1, $src2, $dest1, $dest2, $destinput, $srcsize, $destsize, $file

;####   GUI   ####

;Main Gui
GUICreate("DirCopier", 623, 233, 267, 178)
GUISetFont(8, 800, 0, "MS Sans Serif")
;Location Inputs
GUICtrlCreateGroup("Locations", 8, 16, 601, 97)
GUICtrlCreateLabel("Source", 16, 48, 44, 17)
GUICtrlCreateLabel("Destination", 16, 88, 68, 17)
$srcinput = GUICtrlCreateInput("", 94, 46, 393, 21)
GUICtrlSetState($srcinput,$GUI_DISABLE)
$destinput = GUICtrlCreateInput("", 93, 83, 393, 21)
GUICtrlSetState($destinput,$GUI_DISABLE)
$srcbutton = GUICtrlCreateButton("Src", 495, 45, 75, 25)
$destbutton = GUICtrlCreateButton("Dest", 494, 80, 75, 25)
;File Management radios
GUICtrlCreateGroup("File Management", 8, 128, 281, 89)
$replace_off = GUICtrlCreateRadio("Do not override existing files (Default)", 16, 152, 249, 17)
GUICtrlSetState($replace_off,$GUI_DISABLE)
$replace_on = GUICtrlCreateRadio("Override existing files", 16, 176, 241, 17)
GUICtrlSetState(-1, $GUI_CHECKED)
GUICtrlSetState($replace_on,$GUI_DISABLE)
GUICtrlCreateGroup("", -99, -99, 1, 1)
;Pre scan and go buttons
GUICtrlCreateGroup("Execution", 312, 128, 297, 89)
$go = GUICtrlCreateButton("Copy", 496, 152, 75, 25)
$check = GUICtrlCreateButton("Pre-Scan", 328, 152, 97, 25)
;The progress GUI should not be included until code is provided to support progress
;GUICtrlCreateProgress(392, 192, 174, 17)
;GUICtrlCreateLabel("Progress", 328, 192, 53, 17)


;####Functions####

; Set initial filepath and create if file not already present
Func _FilePathCall()
$file = FileOpen(@ScriptDir & "\filepath.csv", 0) ;Open file to call the filepaths
If $file = -1 Then ;If file is not found then do something
   FileWrite(@scriptdir & "\filepath.csv", "C:\" & @CRLF ) ;create file, write to first line and then move to next line
   FileWrite(@scriptdir & "\filepath.csv", "C:\") ;continue to write to file on next line
   MsgBox(0,"Notification","This is the first time you have run this programme." & @CRLF & _
                           "Initially the copy cource and destination folders are the same." & @CRLF & _ 
                           "You can change this by clicking the Src and Dest buttons")
EndIf
$file = FileOpen(@ScriptDir & "\filepath.csv", 0) ;Open file to call the filepaths
$src1 = FileReadLine($file,1) ;make first line of file the variable
$dest1 = FileReadLine($file,2) ;make second line of file the variable
FileClose($file) ;close off file for later use
GUICtrlSetData($srcinput,$src1) ;Set input box for the source so the assigned variable
GUICtrlSetData($destinput,$dest1) ;Set input box for the source so the assigned variable
EndFunc ;==>_FilePathCall()

;Setting a new default input(done everytime the Dir location is amended)
Func _SetNewDir($inputname, $csvLine)
   $tmp = FileSelectFolder("Please Select Backup Source","") ;user prompt to select a folder
    If @error Then Return SetError(1, 0, 'Error')
   _FileWriteToLine(@ScriptDir & "\filepath.csv", $csvLine, $tmp, 1) ;Writes the new location to the filepath csv used in 'Func _FilePathCall()'
   $file = FileOpen(@ScriptDir & "\filepath.csv", 0) ;Opens file with read access
   $DirSelect = FileReadLine($file,$csvLine) ;Reads the new location that has been set
   FileClose($file) ;Closes file for later use
   GUICtrlSetData($inputname,$DirSelect) ;Sets the input box to reflect the new location
EndFunc ;==>_SetNewDir

;Checks the size of a folder - script taken from autoit forums but in my haste I didnt take down detail of who produced it and cannot find post

Func _GetFolderSize($dir, $units = "b")
    $obj = ObjCreate("Scripting.FileSystemObject")
    If @error == 0 Then
         $folder = $obj.GetFolder($dir)
         If @error == 0 Then
            Select
            Case $units == "b"
               Return $folder.Size
            Case $units == "kb"
               Return $folder.Size/1024
            Case $units == "mb"
               Return $folder.Size/1024/1024
            Case $units == "gb"
               Return $folder.Size/1024/1024/1024
            Case $units == "tb"
               Return $folder.Size/1024/1024/1024/1024
            EndSelect
         Else 
            MsgBox(0,"","An error occurred, check that " & $dir & " exists.")
         EndIf
    Else
        MsgBox(0,"","An error occurred, check that " & $dir & " exists.")
    EndIf
 EndFunc ;==>_GetFolderSize()
 
; Checks if two folders are the same size - not the most accurate way to confirm two folders are the same 
; ##### this feature needs to be improved to check files and version numbers #####
 Func _Compare ()
   If guictrlread($srcinput) = "" Then
       MsgBox(0,"Error", "Please choose a source directory")
       ElseIf guictrlread($destinput) = "" Then
         MsgBox(0,"Error", "Please choose a destination directory")
         Else
            $srcsize = _GetFolderSize(guictrlread($srcinput), "mb")
            $destsize = _GetFolderSize(guictrlread($destinput), "mb")
               If $srcsize = $destsize Then
                  MsgBox(0,"Folder Check", "Each folder is the same size" & @CRLF & _
                           "This would suggest no back up is required")
               Else
                  MsgBox(0,"Folder Check", "Folders sizes do not match." & @CRLF & _
                                           "This would suggest you should run a back up")
               EndIf
   EndIf
EndFunc ;==>_Compare()
    
;Checks the folder sizes every 30 seconds until they match - a weak way of veryfying copy has completed (assumes directories would be different sizes before copy)
;##### this feature needs to be improved to calculate progress and provide %complete  #####
Func _CheckProgress()
   While 1
      Sleep(1000)
      $srcsize = _GetFolderSize(guictrlread($srcinput), "b")
      $destsize = _GetFolderSize(guictrlread($destinput), "b")
      If $srcsize = $destsize Then ExitLoop
   WEnd
   MsgBox(0,"Notification","Folders are now of equal size." & @CRLF & _
                           "This would suggest the copy process is now complete") 
EndFunc ;==>_CheckProgress

;This function carries out the copy of files from source location to destination location
;##### this feature needs to be improved to check which files need copying based on version (last modified) rather than copying all files  #####

Func _CopyFiles()
   If guictrlread($srcinput) = guictrlread($destinput) Then
      MsgBox(0,"Error","The source and destination directory must not be the same")
   Else
      If guictrlread($replace_on) = 1 Then ;Checks to if the radio to replace files with the same name is on
         DirCopy ( guictrlread($srcinput), guictrlread($destinput) , 1 ) ;Copies - allows files to be replaced
         _CheckProgress()
      ElseIf  guictrlread($replace_on) = 4 Then ;Checks to if the radio to replace files with the same name is off
         DirCopy ( guictrlread($srcinput), guictrlread($destinput) , 0 ) ;Copies - does not allow files to be replaced
      EndIf
   EndIf
EndFunc ;==>_CopyFile

; ########################## Function Calls ########################

GUISetState(@SW_SHOW) ;Shows the GUI

_FilePathCall()

 While 1
;Calls various functions depending on certain button presses
   $msg = GUIGetMsg()
      Select
         Case $msg = $GUI_EVENT_CLOSE
            ExitLoop
         Case $msg = $srcbutton
            _SetNewDir($srcinput, "1")
         Case $msg = $destbutton
            _SetNewDir($destinput, "2")
         Case $msg = $check
            _Compare ()
         Case $msg = $go
            _CopyFiles()            
        EndSelect
WEnd

 

Edited 20130903: Version 0.3 script attached below. Takes into account adjustment from AZJIO and label fix following comment from JohnOne

FileCopierAlphaV03.au3

Edited by Karl1983

Regards

Karl Griffiths

Link to comment
Share on other sites
AZJIO Universalist

AZJIO

Posted
Posted (edited) 

Func _GetFolderSize($dir, $units = "b")
    $obj = DirGetSize($dir)
    If Not @error Then
        Switch $units 
            Case "b"
                Return $obj 
            Case "kb"
                Return $obj  / 1024
            Case "mb"
                Return $obj  / 1024 / 1024
            Case "gb"
                Return $obj  / 1024 / 1024 / 1024
            Case "tb"
                Return $obj  / 1024 / 1024 / 1024 / 1024
        EndSwitch
    Else
        MsgBox(0, "", "An error occurred, check that " & $dir & " exists.")
    EndIf
EndFunc   ;==>_GetFolderSize
#include <GUIConstantsEx.au3>
#include<file.au3>

;### Programme Name: DirCopier
;### Version: V0.1 (alpha)
;### Author: Karl Griffiths
;### Description: This programme will copy files from one location to another. It will replace all files
;### with the same name in the destination folder currently. It has a very basis check
;### function which compares the size of the source and destination folders to see if they
;### match in size, it uses this same logic to confirm when copy is complete. It creates
;### a CSV file in the same location as the compiled script and uses this to store the
;### last used source and destination locations incase you want to use it as a regular back up tool.
;### Further Development: See script
;### Special thanks: Wayfarer, Universalist

Global $srcbutton, $destbutton, $src1, $src2, $dest1, $dest2, $destinput, $srcsize, $destsize, $file
Global $sFileCSV = @ScriptDir & "\filepath.csv"

;####   GUI   ####

;Main Gui
$hGUI = GUICreate("DirCopier", 623, 233, 267, 178)
GUISetFont(8, 800, 0, "MS Sans Serif")
;Location Inputs
GUICtrlCreateGroup("Locations", 8, 16, 601, 97)
GUICtrlCreateLabel("Source", 16, 48, 44, 17)
GUICtrlCreateLabel("Destination", 16, 88, 68, 17)
$srcinput = GUICtrlCreateInput("", 94, 46, 393, 21)
GUICtrlSetState($srcinput, $GUI_DISABLE)
$destinput = GUICtrlCreateInput("", 93, 83, 393, 21)
GUICtrlSetState($destinput, $GUI_DISABLE)
$srcbutton = GUICtrlCreateButton("Src", 495, 45, 75, 25)
$destbutton = GUICtrlCreateButton("Dest", 494, 80, 75, 25)
;File Management radios
GUICtrlCreateGroup("File Management", 8, 128, 281, 89)
$replace_off = GUICtrlCreateRadio("Do not override existing files (Default)", 16, 152, 249, 17)
GUICtrlSetState($replace_off, $GUI_DISABLE)
$replace_on = GUICtrlCreateRadio("Override existing files", 16, 176, 241, 17)
GUICtrlSetState(-1, $GUI_CHECKED)
GUICtrlSetState($replace_on, $GUI_DISABLE)
GUICtrlCreateGroup("", -99, -99, 1, 1)
;Pre scan and go buttons
GUICtrlCreateGroup("Execution", 312, 128, 297, 89)
$go = GUICtrlCreateButton("Copy", 496, 152, 75, 25)
$check = GUICtrlCreateButton("Pre-Scan", 328, 152, 97, 25)
;The progress GUI should not be included until code is provided to support progress
;GUICtrlCreateProgress(392, 192, 174, 17)
;GUICtrlCreateLabel("Progress", 328, 192, 53, 17)

;####Functions####

; Set initial filepath and create if file not already present
Func _FilePathCall()
    $file = FileOpen($sFileCSV, 0) ;Open file to call the filepaths
    If $file = -1 Then ;If file is not found then do something
        FileWrite($sFileCSV, "C:\" & @CRLF) ;create file, write to first line and then move to next line
        FileWrite($sFileCSV, "C:\") ;continue to write to file on next line
        MsgBox(0, "Notification", "This is the first time you have run this programme." & @CRLF & _
                "Initially the copy cource and destination folders are the same." & @CRLF & _
                "You can change this by clicking the Src and Dest buttons", 0, $hGUI)
    EndIf
    $file = FileOpen($sFileCSV, 0) ;Open file to call the filepaths
    $src1 = FileReadLine($file, 1) ;make first line of file the variable
    $dest1 = FileReadLine($file, 2) ;make second line of file the variable
    FileClose($file) ;close off file for later use
    GUICtrlSetData($srcinput, $src1) ;Set input box for the source so the assigned variable
    GUICtrlSetData($destinput, $dest1) ;Set input box for the source so the assigned variable
EndFunc   ;==>_FilePathCall

;Setting a new default input(done everytime the Dir location is amended)
Func _SetNewDir($inputname, $csvLine)
    $tmp = FileSelectFolder("Please Select Backup Source", "") ;user prompt to select a folder
    If @error Then Return SetError(1, 0, 'Error')
    _FileWriteToLine($sFileCSV, $csvLine, $tmp, 1) ;Writes the new location to the filepath csv used in 'Func _FilePathCall()'
    $file = FileOpen($sFileCSV, 0) ;Opens file with read access
    $DirSelect = FileReadLine($file, $csvLine) ;Reads the new location that has been set
    FileClose($file) ;Closes file for later use
    GUICtrlSetData($inputname, $DirSelect) ;Sets the input box to reflect the new location
EndFunc   ;==>_SetNewDir

;Checks the size of a folder - script taken from autoit forums but in my haste I didnt take down detail of who produced it and cannot find post

Func _GetFolderSize($dir, $units = "b")
    $obj = DirGetSize($dir)
    If Not @error Then
        Switch $units 
            Case "b"
                Return $obj 
            Case "kb"
                Return $obj  / 1024
            Case "mb"
                Return $obj  / 1024 / 1024
            Case "gb"
                Return $obj  / 1024 / 1024 / 1024
            Case "tb"
                Return $obj  / 1024 / 1024 / 1024 / 1024
        EndSwitch
    Else
        MsgBox(0, "", "An error occurred, check that " & $dir & " exists.", 0, $hGUI)
    EndIf
EndFunc   ;==>_GetFolderSize

; Checks if two folders are the same size - not the most accurate way to confirm two folders are the same
; ##### this feature needs to be improved to check files and version numbers #####
Func _Compare()
    Local $sSrcPath = GUICtrlRead($srcinput)
    Local $sDestPath = GUICtrlRead($destinput)
    If $sSrcPath = "" Then
        MsgBox(0, "Error", "Please choose a source directory", 0, $hGUI)
    ElseIf $sDestPath = "" Then
        MsgBox(0, "Error", "Please choose a destination directory", 0, $hGUI)
    Else
        $srcsize = _GetFolderSize($sSrcPath, "mb")
        $destsize = _GetFolderSize($sDestPath, "mb")
        If $srcsize = $destsize Then
            MsgBox(0, "Folder Check", "Each folder is the same size" & @CRLF & _
                    "This would suggest no back up is required", 0, $hGUI)
        Else
            MsgBox(0, "Folder Check", "Folders sizes do not match." & @CRLF & _
                    "This would suggest you should run a back up", 0, $hGUI)
        EndIf
    EndIf
EndFunc   ;==>_Compare

;Checks the folder sizes every 30 seconds until they match - a weak way of veryfying copy has completed (assumes directories would be different sizes before copy)
;##### this feature needs to be improved to calculate progress and provide %complete  #####
Func _CheckProgress()
    While 1
        Sleep(1000)
        $srcsize = _GetFolderSize(GUICtrlRead($srcinput), "b")
        $destsize = _GetFolderSize(GUICtrlRead($destinput), "b")
        If $srcsize = $destsize Then ExitLoop
    WEnd
    MsgBox(0, "Notification", "Folders are now of equal size." & @CRLF & _
            "This would suggest the copy process is now complete")
EndFunc   ;==>_CheckProgress

;This function carries out the copy of files from source location to destination location
;##### this feature needs to be improved to check which files need copying based on version (last modified) rather than copying all files  #####

Func _CopyFiles()
    Local $sSrcPath = GUICtrlRead($srcinput)
    Local $sDestPath = GUICtrlRead($destinput)
    If $sSrcPath = $sDestPath Then
        MsgBox(0, "Error", "The source and destination directory must not be the same", 0, $hGUI)
    Else
        If GUICtrlRead($replace_on) = 1 Then ;Checks to if the radio to replace files with the same name is on
            DirCopy($sSrcPath, $sDestPath, 1) ;Copies - allows files to be replaced
            _CheckProgress()
        ElseIf GUICtrlRead($replace_on) = 4 Then ;Checks to if the radio to replace files with the same name is off
            DirCopy($sSrcPath, $sDestPath, 0) ;Copies - does not allow files to be replaced
        EndIf
    EndIf
EndFunc   ;==>_CopyFiles

; ########################## Function Calls ########################

GUISetState(@SW_SHOW) ;Shows the GUI

_FilePathCall()

While 1
    ;Calls various functions depending on certain button presses
    Switch GUIGetMsg()
        Case $GUI_EVENT_CLOSE
            ExitLoop
        Case $srcbutton
            _SetNewDir($srcinput, "1")
        Case $destbutton
            _SetNewDir($destinput, "2")
        Case $check
            _Compare()
        Case $go
            _CopyFiles()
    EndSwitch
WEnd

Edited by AZJIO

My other projects or all

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...