Jump to content
Sign in to follow this  
ModemJunki

2d to 2d

Recommended Posts

Hi all,

I need a hint. I'm not an adept coder by any means. I have a 2d array, and I want to copy records from the array to another 2d array. So for example, I can check strings inside the array and match them, and then write the whole row from the array to another array.

So for array:

Global $DeviceLocationList[1][4]

I already can parse through it and check against an entry in a column, so I know the row number, but I can't figure out how to copy the entire row to a new entry in a different array in the same For loop.

I am using __arrayadd for 2d arrays as downloaded from the forums to build the array. Below is a snippet where I build a 2d array, for example I would parse through that an might want to copy the record to another location. Apparently I'm too thick to understand how to read the entire row and pass it to a new array. :-(

I'm looking at this page and still scratching my head -> '?do=embed' frameborder='0' data-embedContent>>

(I use the below to get NIC card infos and then do <stuff> to them.)

Func _GetNICHWKey($PNPFilter, $ENUMKey)
    For $i = 1 To 65535
        $TopKey = RegEnumKey("HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\" & $ENUMKey, $i)
        For $j = 1 To 65535
            $SubKey = RegEnumKey("HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\" & $ENUMKey & $TopKey, $j)
            If StringInStr($SubKey, $PNPFilter) Then
                For $k = 1 To 65535
                    $DeviceKey = RegEnumKey("HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\" & $ENUMKey & $TopKey & "\" & $SubKey, $k)
                    $DeviceSubKey = "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\" & $ENUMKey & $TopKey & "\" & $SubKey & "\" & $DeviceKey
                    If $DeviceKey = "" Then ExitLoop

                    $DevName1 = RegRead($DeviceSubKey, "DeviceDesc")
                    $DevName2 = StringSplit($DevName1, ";")
                    $DevNameLoc = $DevName2[0]
                    $NICENUMDevDesc = $DevName2[$DevNameLoc]

                    $NICENUMDevLoc = RegRead($DeviceSubKey, "LocationInformation")
                    $DevLoc1 = StringSplit($NICENUMDevLoc, ";")
                    $DevLoc2 = $DevLoc1[0]
                    $DevLoc3 = $DevLoc1[$DevLoc2]
                    $DevLoc = $DevLoc3

                    Local $DEVLocadd[4] = [$NICENUMDevDesc, $DevLoc, "", $DeviceKey]
                    __ArrayAdd($DeviceLocationList, $DEVLocadd, False)
                    If @error <> 0 Then ExitLoop
                Next
            EndIf
            If $SubKey = "" Then ExitLoop
            If @error <> 0 Then ExitLoop
        Next
        If $TopKey = "" Then ExitLoop
        If @error <> 0 Then ExitLoop
    Next
    $DeviceLocationList[0][0] = UBound($DeviceLocationList)
    _ArraySort($DeviceLocationList, 0, 1, 0, 1); we sort the list of devices according to the index numbers, they end up in order of PCIbus, device, then port
    For $i = 1 To $DeviceLocationList[0][0] - 1 ; now we reference the location and deduce/insert the port number to position nr 2 by the ranking
        $DeviceLocationList[$i][2] = $i
    Next
EndFunc   ;==>_GetNICHWKey

This is the __arrayadd function used to build the array.

; #FUNCTION# ====================================================================================================================
; Name...........: __ArrayAdd
; Description ...: Adds a specified value or row at the end of an existing 1D or 2D array.
; Syntax.........: __ArrayAdd(ByRef $avArray, $vValue [, $NestArray = True])
; Parameters ....: $avArray - Array to modify ByRef
;                 $vValue  - Value to add, can be a 1D array if $avArray = 2D and $NestArray = False
;                 $NestArray - Optional flag if False causes array passed as $vValue to be interpreted as a 1D array
;                              of values to place in a single new row of a 2D array.  Default = True, saves array as
;                              a single element.  This flag is ignored if $avArray is 1D or $vValue is not an array.
; Return values .: Success - Index of last added item
;                 Failure - -1, sets @error to 1, and sets @extended to specify failure (see code below)
; Author ........: Jos van der Zande <jdeb at autoitscript dot com>
; Modified.......: Ultima - code cleanup
;             ; PsaltyDS - Array and 2D $vValue inputs added
; Remarks .......: Each call to this function adds exactly one new row to $avArray.  To add more rows use _ArrayConcatenate.
; Related .......: _ArrayConcatenate, _ArrayDelete, _ArrayInsert, _ArrayPop, _ArrayPush
; Link ..........;
; Example .......; Yes
; =================================================================================================================================
Func __ArrayAdd(ByRef $avArray, $vValue, $NestArray = True)
    Local $iBoundArray0, $iBoundArray1, $iBoundArray2, $iBoundValue1

    If IsArray($avArray) = 0 Then Return SetError(1, 0, -1); $avArray is not an array

    $iBoundArray0 = UBound($avArray, 0); No. of dimesions in array
    If $iBoundArray0 > 2 Then Return SetError(1, 1, -1); $avArray is more than 2D

    $iBoundArray1 = UBound($avArray, 1); Size of array in first dimension
    If $iBoundArray0 = 2 Then $iBoundArray2 = UBound($avArray, 2); Size of array in second dimension

    If ($iBoundArray0 = 1) Or (IsArray($vValue) = 0) Or $NestArray Then
        ; If input array is 1D, or $vValue is not an array, or $NestArray = True (default) then save $vValue literally
        If $iBoundArray0 = 1 Then
            ; Add to 1D array
            ReDim $avArray[$iBoundArray1 + 1]
            $avArray[$iBoundArray1] = $vValue
        Else
            ; Add to 2D array at [n][0]
            ReDim $avArray[$iBoundArray1 + 1][$iBoundArray2]
            $avArray[$iBoundArray1][0] = $vValue
        EndIf
    Else
        ; If input array is 2D, and $vValue is an array, and $NestArray = False,
        ;   then $vValue is a 1D array of values to add as a new row.
        If UBound($vValue, 0) <> 1 Then Return SetError(1, 2, -1); $vValue array is not 1D
        $iBoundValue1 = UBound($vValue, 1)
        If $iBoundArray2 < $iBoundValue1 Then Return SetError(1, 3, -1); $vValue array has too many elements
        ReDim $avArray[$iBoundArray1 + 1][$iBoundArray2]
        For $n = 0 To $iBoundValue1 - 1
            $avArray[$iBoundArray1][$n] = $vValue[$n]
        Next
    EndIf
    ; Return index of new last row in $avArray
    Return $iBoundArray1

Share this post


Link to post
Share on other sites

You can't copy a complete row with a single command. You have to do it column by column. Example:

Global $aFrom[2][3]
Global $aTo[1][3]
; Copy row 2 of the source array to row 1 of the target array
For $i = 0 to UBound($aFrom, 2) - 1
    $aTo[1][$i] = $aFrom[2][$i]
Next

My UDFs and Tutorials:

Spoiler

UDFs:
Active Directory (2018-12-03 - Version 1.4.11.0) - Download - General Help & Support - Example Scripts - Wiki
OutlookEX (NEW 2019-03-02 - Version 1.3.5.0) - Download - General Help & Support - Example Scripts - Wiki
Outlook Tools (2019-01-22 - Version 0.1.0.0) - Download - General Help & Support
ExcelChart (2017-07-21 - Version 0.4.0.1) - Download - General Help & Support - Example Scripts
PowerPoint (2017-06-06 - Version 0.0.5.0) - Download - General Help & Support
Excel - Example Scripts - Wiki
Word - Wiki
 
Tutorials:

ADO - Wiki

 

Share this post


Link to post
Share on other sites

What about just looping through the array (backwards) and use _ArrayDelete to kill ones you don't want?

Otherwise you'd need to loop through the row when you decide you want to keep it like water suggested.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Similar Content

    • By nacerbaaziz
      good morning everybody.
      today i liked to share an small example with you
      which it an function to read the registry values as an array
      the result array is 2d array witch
      $a_array[n][0] = value name
      $a_array[n][1] = value Data
      $a_array[0][0] = values count
      here's the function

      #include <Array.au3> #include <WinAPIReg.au3> #include <APIRegConstants.au3> Local $a_array = _RegReadToArray("HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run") If @error Then     MsgBox(16, "error", @error)     Exit EndIf _ArrayDisplay($a_array) Func _RegReadToArray($s_RegKey)     Local $a_KeySplitInfo = StringSplit($s_RegKey, "\\", 2)     If UBound($a_KeySplitInfo) <= 1 Then         $a_KeySplitInfo = StringSplit($s_RegKey, "\", 2)         If UBound($a_KeySplitInfo) <= 1 Then Return (1, 1, 0)     EndIf     Local $H_KeyInfo = "", $s_RegKeyInfo = ""     Switch $a_KeySplitInfo[0]         Case "hklm", "HKEY_LOCAL_MACHINE", "hklm64", "HKEY_LOCAL_MACHINE64"             $H_KeyInfo = $HKEY_LOCAL_MACHINE         Case "hkCu", "HKEY_CURRENT_USER", "hkCU64", "HKEY_CURRENT_USER64"             $H_KeyInfo = $HKEY_CURRENT_USER         Case "hkCr", "HKEY_CLASSES_ROOT", "HKCR64", "HKEY_CLASSES_ROOT64"             $H_KeyInfo = $HKEY_CLASSES_ROOT         Case "HKU", "HKEY_USERS", "HKU64", "HKEY_USERS64"             $H_KeyInfo = $HKEY_USERS         Case Else             Return SetError(2, 2, 0)     EndSwitch     _ArrayDelete($a_KeySplitInfo, 0)     $s_RegKeyInfo = _ArrayToString($a_KeySplitInfo, "\")     Local $H_KeyInfoOpen = _WinAPI_RegOpenKey($H_KeyInfo, $s_RegKeyInfo, $KEY_READ)     Local $A_KeyInfo = _WinAPI_RegQueryInfoKey($H_KeyInfoOpen)     If @error Then Return SetError(1, 1, 0)     _WinAPI_RegCloseKey($H_KeyInfoOpen)     Local $A_RegVal[$A_KeyInfo[2] + 1][2]     Local $iV = 1, $s_RegRead = ""     While 1         $s_RegVal = RegEnumVal($s_RegKey, $iV)         If @error <> 0 Then ExitLoop         $s_RegRead = RegRead($s_RegKey, $s_RegVal)         If Not (@error) Then             $A_RegVal[$iV][0] = $s_RegVal             $A_RegVal[$iV][1] = $s_RegRead         EndIf         $iV += 1     WEnd     $A_RegVal[0][0] = UBound($A_RegVal) - 1     If $A_RegVal[0][0] >= 1 Then         Return $A_RegVal     Else         Return SetError(3, 3, 0)     EndIf EndFunc   ;==>_RegReadToArray
      i hope you benefit from it
      with my greetings
    • By JackER4565
      Hi, first of all thanks to all the guys who always help people in the forums, I wouldn't be able to do anything if wasn't for your help, even if I don't ask it myself.
       
      I've created this code to get some info on a monitoring network on my work. It relays on _IETableGetCollection and _IETableWriteToArray.
      It works well, but take around 3:25 minutes to get the info from 28 pages (some of them are large and take longer to load, but most of them are small and fast).
      My question is if you see a way to get the program to go faster...
       
      I've tried to make it easy for you to understand and edited somethings with sensitive info.
      (Some of the pages doesn't have the black divider with MIRA in the end, so I need to search if it is there or not.)
       
      #include <IE.au3> #include <array.au3> Local $oIE = _IECreate("about:blank", 0, 0) Local $paginas[28] = [89, 90, 91, 92, 93, 96, 105, 113, 119, 125, 126, 129, 131, 133, 135, 137, 139, 140, 141, 144, 145, 146, 148, 149, 150, 151, 158, 159] Local $Datos_array[0][2] Local $oTable Local $tabla Local $aux_x = 1 Local $ar = 1 Local $Numtables_datos = 0 MsgBox(0, "asd", "asd") For $pag = 0 To UBound($paginas) - 1 Step 1 _IENavigate($oIE, "<WEBSITE URL>" & $paginas[$pag]) ; <<< the pages to load are always the same except for the last digits. _ArrayAdd($Datos_array, $paginas[$pag] & "|" & "Entrante", 0, "|") ; <<<<<<<<<<<<<<<< adds the page number toarray [0, 0] ;############################################ START counts amount of tables with traffic $oTable = _IETableGetCollection($oIE) Local $iNumTables = @extended For $i = 3 To $iNumTables - 2 Step 1 $oTable = _IETableGetCollection($oIE, $i) $nomb_tabla2 = _IETableWriteToArray($oTable) ; <<<<<<<< TABLE TO ARRAY. $string2 = StringStripWS($nomb_tabla2[1][0], 8) If $string2 <> "MIRA" Then $Numtables_datos = $Numtables_datos + 1 Next $tabla_End = $iNumTables - $Numtables_datos ;############################################ FIN $tabla_Start = 4 $tabla_trafico = 2 For $for = 1 To $Numtables_datos Step 1 $oTable = _IETableGetCollection($oIE, $tabla_Start - 1) ; <<<<<<<<<<< NAME OF THE TABLE; row2 = mira $nomb_tabla = _IETableWriteToArray($oTable) ; <<<<<<<< TABLE TO ARRAY ;########################################### ADDS the traffic number into the row $string = StringStripWS($nomb_tabla[1][0], 8) If $string == "MIRA" Then ;si o si pasa por aca 1 vez _ArrayAdd($Datos_array, $nomb_tabla[0][0]) $nomb_aux = $nomb_tabla[0][0] $aux_x = 1 $tabla_trafico = $tabla_trafico + 2 Else ;esto deberia ser por row _ArrayAdd($Datos_array, $nomb_aux & " " & $aux_x) $aux_x = $aux_x + 1 $tabla_trafico = $tabla_trafico + 1 EndIf $oTable = _IETableGetCollection($oIE, $tabla_trafico) Local $aTableData = _IETableWriteToArray($oTable) $bps = _ArrayToString($aTableData, "|", 0, 0, @CRLF, 0, 0) $bps = StringRight($bps, 5) $bps = StringLeft($bps, 4) $trafico_actual = _ArrayToString($aTableData, "|", 0, 0, @CRLF, 2, 2) If $bps == "Gbps" Then $trafico_actual = $trafico_actual * 1000 If $bps == "Kbps" Then $trafico_actual = $trafico_actual / 1000 $Datos_array[$ar][1] = $trafico_actual $ar = $ar + 1 If $string == "MIRA" Then $tabla_Start = $tabla_Start + 2 Else $tabla_Start = $tabla_Start + 1 EndIf Next $ar = $ar + 1 ;~ ############# CAÍDA ############ ;~ If $actual_entrante = 0 Then ;~ $xxx = 0 ;~ Do ;~ MsgBox(0, "Tráfico Caído", $paginas[$i], 5) ;~ $xxx = $xxx + 1 ;~ Until $xxx = 10 ;~ EndIf ;~ ############# CAÍDA ############. Local $Numtables_datos = 0 Next _ArrayDisplay($Datos_array, "Array display") _IEQuit($oIE) Thanks!! 


      monitoria.html
    • By Skysnake
      Hi
      I am trying to set Accelerator keys from an array.
      I select the KEY and CONTROL from a SQLite table, the Array looks like that generated for the Helpfile, but I can't get the CONTROLS to resolve...
      I though about Assign & Eval, but not sure if that's a step in the right direction. IsDeclared shows that the $var exists in Local Scope -1.  
       
      Local $Main = GUICreate("Custom MsgBox", 225, 80) GUICtrlCreateLabel("Please select a button.", 10, 10) Local $idButton_Yes = GUICtrlCreateButton("Yes", 10, 50, 65, 25) Local $idButton_No = GUICtrlCreateButton("No", 80, 50, 65, 25) Local $idButton_Exit = GUICtrlCreateButton("Exit", 150, 50, 65, 25) Local $query, $aResult, $iRows, $iColumns $query = "" ;reset $query = "Select hotkey_key, hotkey_ctrl from mytable where mykeys = 'hotkey' ; " ; ; Query $iRval = _SQLite_GetTable2d($sqliteDb, $query, $aResult, $iRows, $iColumns) If $iRval = $SQLITE_OK Then Local $sizeofHotkeys = UBound($aResult) - 1 ConsoleWrite("$sizeofHotkeys " & $sizeofHotkeys & @CRLF) If $sizeofHotkeys > 0 Then Local $main__aAccelKeys[$sizeofHotkeys][2] For $i = 0 To $sizeofHotkeys - 1 $j = $i + 1 ; replace friendly text with code -- ! alt + Shift ^ Ctrl # Windows $aResult[$j][0] = StringReplace($aResult[$j][0], "Alt", "!") $aResult[$j][0] = StringReplace($aResult[$j][0], "Shift", "+") $aResult[$j][0] = StringReplace($aResult[$j][0], "Ctrl", "^") $main__aAccelKeys[$i][0] = $aResult[$j][0] ;--- $main__aAccelKeys[$i][1] = $aResult[$j][1] ;--- Next ;~ Row|Col 0|Col 1 ;~ Row 0|F2|$idButton_Yes ;~ Row 1|F3|$idButton_No _DebugArrayDisplay($main__aAccelKeys) Local $rv = GUISetAccelerators($main__aAccelKeys, $Main) GUISetState(@SW_SHOW) ; Display the GUI.  
      Please note that this is a modified Helpfile example.
      The Helpfile specifies (a) WinHandle and (b) last Gui created.
      --> the example uses a control not a WinHandle and (b) what happens with ChildGuis? Also, the HelpFile specifies lower case, yet the examples show "{F1}" upper case?
      Also, is there a way to check the result of the GuiSetAccelerator function? 
      Note, if I add these to lines after the FOR loop, then the F1 works, and the DebugArrayDisplays shows control 4... not it's name... So I am in the right place, but my $vars names do not convert to their control numbers in the GUI
      Next $main__aAccelKeys[$sizeofHotkeys - 1][0] = "{F1}" ; -- -- use the extra row for the F1 $main__aAccelKeys[$sizeofHotkeys - 1][1] = $ChmHLP ;--- Skysnake
    • By wolflake
      I've used PowerPro for years and it had a feature that let you turn an array into a menu.  It also let you know if it got a right click. I liked the right click feature because it doubled the menu item usage ie left/right on the same menu item.  I tried recreate that usage with a context menu.   With _ArrayToMenu you can pass menu items for 1 and 2 dimensional arrays. Note you can indicate sub-menu but using a -> at the end of the item.  Use a - to make a separater. Optionally you can pass Tooltips by passing a second array. This array must have the same dimensions as the items array even if not all the elements contain tips. The UDF returns an array with this index of row (and if submenus column), the third element is 1 if right clicked otherwise 0 and the fourth element of the array is the label of the menu item. If the user escapes without choosing an item the the first element returns a -1.  Same thing if the user clicks on another window.   @error returns 1 if there was no array passed, 2 if the second array has different dimensions than the first.   If you use the same label in two parts of your menu you will have to distinguish them.  You can do that by additionally making sure that the selection matches the index number(s).  Note that you'll have to match the index number plus label before you match just the label because Switch will use the first match it can find.  In the example below I am using a check on which column the data is in.  If it's not in the first column then it must be the other "Beef".   Beef
      Fruit
      Col2 > Beef
                  Bread   $aR = _ArrayToMenu($aM) Switch $aR[3]
      Case "Beef" and $aR[2] = 0
             Beef1()
       Case "Beef"
             Beef2()
      EndSwitch   On a technical note I attached the context menu to the window itself not a dummy control and I didn't use _GUICtrlMenu_TrackPopupMenu.  Instead I launched the context menu with "send shift-F10" and waited for GuiGetMsg() to give me the selection. Right click is picked up by GUIRegisterMsg WM_RBUTTONUP and Tooltips are done with GUIRegisterMsg WM_MENUSELECT. The whole thing is done with 3 functions. 
      I won't tell you how long it took me to figure this out but I'll say that on one of my early attempts it had two windows running at once and one was just to recieve the right click an tell the other it got it.  Suffice it to say I'm no wiz at Autoit but I really appreciate the support the community offers and I hope someone finds this useful. BTW I wrote a script to produce 1d and 2d auotit array code from excel in case you want to model your menu in excel. Here is the link.
      https://www.autoitscript.com/forum/topic/139260-autoit-snippets/?do=findComment&comment=1412314
      _ArrayToMenu() UDF
      ;ArrayToMenu with submenus, tooltips, rightclick and esc to close. ; #INDEX# ======================================================================================================================= ; Title .........: _ArrayToMenu ; AutoIt Version : 3.3.14.2 ; Description ...: Show an array as a popup menu optionally with tooltips and right click. ; Author(s) .....: Rick Sharp ; =============================================================================================================================== ; #FUNCTION# ==================================================================================================================== ; Name..........: _ArrayToMenu($aArray_menu[,$aArray_tooltips]) ; Description...: Display an array as a menu and return the users choice, display tooltips(optional), return right click. ; Syntax........: _ArrayToMenu($aArray_menu[,$aArray_tooltips]) ; ; Parameters....: ; Required......: A 1d or 2d array of menu items ; Use a minus sign in the item to indicate a menu separator. ; Use -> at the end of an item to indicate a sub-menu. ; Optional......: A 1d or 2d array of tooltips. The array must use the same dimensions as the menu items array. ; ; Return values.: An Array ; $aArray[0] is index of the row (-1 if exited with no choice) ; $aArray[1] is index of the column ; $aArray[2] is 1 if right clicked ; $aArray[3] is the selected item (if any) ; Notes.........: If the user clicks on another window the ArrayToMenu returns as if esc were pressed. ; Sub-Menus are limited to 10 levels if you need more change $ahM[10] ; =============================================================================================================================== ; #VARIABLES# =================================================================================================================== ; Global $__g_iRT = 0, $__g_aTT1, $__g_ahi ; "$__g_iRT" for right click flag, "$__g_aTT1" for tips, "$__g_ahi" for index of id's in menu and tips ; =============================================================================================================================== ; #@error# ====================================================================================================================== ; 1 - First parameter is Not an array ; 2 - The Menu/Items array and the Tips array are not the same number of dimensions ; =============================================================================================================================== #include-once #include <WindowsConstants.au3> #include <GuiMenu.au3> #include <array.au3> #include <misc.au3> Func _ArrayToMenu($aMenu, $att = "") If Not IsArray($aMenu) Then Return SetError(1, 0, -1) Global $__g_iRT = 0 Local $ahM[10], $iCcnt = UBound($aMenu, 2), $iRcnt = UBound($aMenu), $iRow, $iCol, $b_Esc If UBound($aMenu, 2) = 0 Then _ArrayColInsert($aMenu, 1) ;if 1d array make it 2d EndIf ;Prep Loop to make Menus and Sub-Menus $iRcnt = UBound($aMenu) ;Count of Rows/Items $iCcnt = UBound($aMenu, 2) ;Count of Cols/Menus GUIRegisterMsg($WM_RBUTTONUP, "WM_RBUTTONUP") ;handles Right Click If IsArray($att) Then If UBound($att, 2) = 0 Then _ArrayColInsert($att, 1) If UBound($att, 2) <> $iCcnt Or UBound($att) <> $iRcnt Then Return SetError(2, 0, -1) ;$amenu and $att not same dimensions Global $__g_aTT1 = $att ;added $__g_aTT1 because $att was not seen by WM_MenuSelect for tooltips GUIRegisterMsg($WM_MENUSELECT, "WM_MENUSELECT") ;handles tooltips EndIf Local $mPos = MouseGetPos() #Region ### START Koda GUI section ### Form= $hMenu = GUICreate("C_menu", 10, 10, $mPos[0], $mPos[1], $WS_POPUP, $WS_EX_TOPMOST) GUISetState(@SW_SHOW) #EndRegion ### END Koda GUI section ### ;Build Menus Global $__g_ahi[$iRcnt + 1][$iCcnt + 1] ;array to hold Menu Item id's $iMcnt = 0 ;Menu count $ahM[$iMcnt] = GUICtrlCreateContextMenu() ;if the array element is null then it falls through and nothing happens For $j = 0 To $iCcnt - 1 ;for each Column/Menu For $i = 0 To $iRcnt - 1 ;for each Row/Item If StringRight($aMenu[$i][$j], 2) = "->" Then ;Sub-Menu $aMenu[$i][$j] = StringTrimRight($aMenu[$i][$j], 2) ;remove -> $iMcnt += 1 $ahM[$iMcnt] = GUICtrlCreateMenu($aMenu[$i][$j], $ahM[$j]) ; $__g_ahi[$i][$j] = $ahM[$iMcnt] ElseIf $aMenu[$i][$j] > "" Then ;Normal item If StringLeft($aMenu[$i][$j], 1) = "-" Then $aMenu[$i][$j] = "" $__g_ahi[$i][$j] = GUICtrlCreateMenuItem($aMenu[$i][$j], $ahM[$j]) EndIf Next Next Send("+{F10}") ;sends right click to open context menu While 1 $nMsg = GUIGetMsg() If $nMsg > 0 Then ;ConsoleWrite("nMsg= " & $nMsg & @CRLF) $iRow = _ArraySearch($__g_ahi, $nMsg) $iCol = _ArraySearch($__g_ahi, $nMsg, 0, 0, 0, 0, 0, $iRow, True) ExitLoop EndIf If _IsPressed("1B") = 1 Or WinActive("C_menu") = 0 Then $b_Esc = -1 ExitLoop EndIf WEnd ;*** Done *** GUIDelete($hMenu) Local $aAr1[4] $aAr1[0] = $iRow $aAr1[1] = $iCol $aAr1[2] = $__g_iRT If Not $b_Esc = -1 Then $aAr1[3] = $aMenu[$aAr1[0]][$aAr1[1]] Else $aAr1[0] = -1 EndIf Return $aAr1 EndFunc ;==>_ArrayToMenu ;Check for Right Click Func WM_RBUTTONUP($hMenu, $iMsg, $iwParam, $ilParam) $__g_iRT = 1 ;Mark as rclicked Send("{Enter}") ;choose the item EndFunc ;==>WM_RBUTTONUP ;Tooltips Func WM_MENUSELECT($hMenu, $iMsg, $iwParam, $ilParam) Local $idMenu = BitAND($iwParam, 0xFFFF) Local $iRow, $iCol If $idMenu > 0 Then $iRow = _ArraySearch($__g_ahi, $idMenu) If $iRow > -1 Then $iCol = _ArraySearch($__g_ahi, $idMenu, 0, 0, 0, 0, 0, $iRow, True) EndIf If $iCol > -1 And $iRow > -1 And $__g_aTT1[$iRow][$iCol] > " " Then ToolTip($__g_aTT1[$iRow][$iCol]) Else ToolTip("") EndIf EndIf EndFunc ;==>WM_MENUSELECT Example 1 Simple 1d array with tooltips, item separator and right click.
      #include "ArrayToMenu.au3" ;Simple 1d array with tooltips item separator and right click. $aM = StringSplit("Zero,One,-,Two/Two_R", ",", 3) ;make an array for the menu items $aT = StringSplit("Zero,One,-,", ",", 3) ;make an array for the menu Tooltips $aR = _ArrayToMenu($aM,$aT) if @error then ConsoleWrite(@error & @CRLF) EndIf ConsoleWrite("R: " & $aR[0] & " " & "C: " & $aR[1] & " " & "Rclick: " & $aR[2] & " " & "Item: " & $aR[3] & @CRLF) If $aR[0] = -1 Then ;either hit escape or clicked on another window ConsoleWrite("Esc" & @CRLF) Exit EndIf ;_ArrayDisplay($aR) Switch $aR[3] Case "Zero" Zero() Case "One" One() Case "Two/Two_R" And $aR[2] = 0 ;No Rclick Two() Case "Two/Two_R" And $aR[2] = 1 ;Rclick Two_R() EndSwitch Func Zero() ConsoleWrite("You chose: Zero" & @CRLF) EndFunc ;==>Zero Func One() ConsoleWrite("You chose: One" & @CRLF) EndFunc ;==>One Func Two() ConsoleWrite("You chose: Two" & @CRLF) EndFunc ;==>Two Func Two_R() ConsoleWrite("You chose: Two_R" & @CRLF) EndFunc ;==>Two_R Example 2 2d array with sub-menu
      #include "ArrayToMenu.au3" ;2d array with a sub-menu dim $aM[4][2] = [["Beef", "Orange"], ["Pork", "Apple"], ["Chicken", "Grape"], ["Fruit->", ""]] ;Note you don't need a tooltip for every item but you at least need a place holder in the array dim $aT[4][2] = [["Red Meat", "Fruit"], ["Other white meat", "Fruit"], ["White meat", "Fruit"], ["", ""]] $aR = _ArrayToMenu($aM,$aT) if @error Then ConsoleWrite(@error & @CRLF) Exit EndIf If $aR[0] = -1 Then ConsoleWrite("Esc" & @CRLF) Exit EndIf ConsoleWrite("R: " & $aR[0] & " " & "C: " & $aR[1] & " " & "Rclick: " & $aR[2] & " " & "Item: " & $aR[3] & @CRLF) Switch $aR[3] Case "Beef" Beef() Case "Pork" Pork() Case "Chicken" Chicken() Case "Orange" ConsoleWrite("Oranges are good for you!" & @CRLF) ConsoleWrite("Oranges" & " $aR[0] = " & $aR[0] & " $aR[1] = " & $aR[1] & @CRLF) Case "Apple" ConsoleWrite("Apples are good for you!" & @CRLF) Case "Grape" ConsoleWrite("Grapes are good for you!" & @CRLF) EndSwitch Func Beef() ConsoleWrite("Beef" & " $aR[0] = " & $aR[0] & " $aR[1] = " & $aR[1] & @CRLF) EndFunc ;==>Beef Func Pork() ConsoleWrite("Pork" & " $aR[0] = " & $aR[0] & " $aR[1] = " & $aR[1] & @CRLF) EndFunc ;==>Pork Func Chicken() ConsoleWrite("Chicken" & @CRLF) EndFunc ;==>Chicken  
    • By Ibet
      Hey all, 
      Ending day 2 of learning AutoIt, and I'm stumped. I wrote an extremely rudimentary script simulating keystrokes for reading/copying values from one excel spreadsheet and pasting them into another spreadsheet, line by line. It works, but it doesn't use any of the Excel UDFs and was just sloppy. So, I'm trying to re-write it using some Excel UDFs to not only optimize the script, but to also learn how to use the Excel UDFs. If the answer is in a help file, please explain as I'm sometimes having problems understanding the examples in the help files.
      I'm getting the error: 
      "C:\Users\johndoe\Desktop\AutoIt Test\AutoIt_Read spreadsheet 1 - write spreadsheet 2-version2.au3" (25) : ==> Array variable has incorrect number of subscripts or subscript dimension range exceeded.: MsgBox(0,"Test","Test",$SourceEntry[1]) MsgBox(0,"Test","Test",^ ERROR >Exit code: 1 Time: 1.804 Here is the code:
      #include<Array.au3> #include<Excel.au3> ;-------------------Read from Source--------------------------- Local $oExcel_Source = _Excel_Open() Local $sWorkbook = "C:\Users\johndoe\Desktop\AutoIt Test\AutoIt_Testing_SOURCE.xlsx" Local $oWorkbook = _Excel_BookOpen($oExcel_Source,$sWorkbook) Local $SourceRow = 3 ;--eventually will be used to iterate through the rows, one at a time Local $SourceEntry[5] = _Excel_RangeRead($oWorkbook,Default,"A"&$SourceRow&":E"&$SourceRow) _ArrayDisplay($SourceEntry, "1D Display") ;--Displays array values correctly MsgBox(0,"Test","Test",$SourceEntry[1]) ;--Gives error, for any index in the array I want to make sure I can read the values of the array individually, before I try putting them into another document. This is because I've got to add some checks against the values already existing in the destination spreadsheet before any manipulation. I've spent the last hour or more googling that error and reading multiple posts where that error is meaning many different things, so unsure EXACTLY what the problem is. Would greatly appreciate a fix and/or explanation as well as patience with my noob-ness.
      Thanks in advance
×
×
  • Create New...