Jump to content
  1. LordBoling

    LordBoling

  2. jdelaney

    jdelaney

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By sudeepjd
      I am looking for a way to pull up a Child GUI Window that users can enter information into and return that information to the main for loop which is running off an array. However, I have been unable to do so because the For loop continues even though the child window is open. If I put in another while loop inside the child window function, I am not able to poll the windows for the events looking for the close button getting clicked.
      I have put together a simple test application that shows this. Any help with holding the main loop while the child window is open and returning when the Close button is clicked is appreciated.
      In the below example, the child window contains a single text box, however, on my main application the Child GUI is much more complex with multiple pieces of information being returned.
      #include <GUIConstantsEx.au3> #include <WindowsConstants.au3> #include <Array.au3> AutoItSetOption("GUIOnEventMode", 1) Global $hGUI, $hChild Global $childClose = False Global $childValue OpenMainGUI() While Sleep(100) ConsoleWrite("Main Loop") WEnd Func OpenMainGUI() ; Create a GUI with various controls. Local $hGUI = GUICreate("Example", 400, 100) $btnMain = GUICtrlCreateButton("Open", 10, 10, 100, 30) ; Display the GUI. GUISetState(@SW_SHOW, $hGUI) ; Events GUISetOnEvent($GUI_EVENT_CLOSE, "_ExitMain", $hGUI) GUICtrlSetOnEvent($btnMain, "createChildren") EndFunc ;==>Example Func createChildren() For $i = 1 to 5 createChild($i) ConsoleWrite($i & " - " & $childValue & @CRLF) Next EndFunc Func createChild($valInp) $childClose = False $hChild = GUICreate("Child GUI", 210, 72, -1, -1, -1, -1, $hGUI) $txtOperation = GUICtrlCreateInput($valInp, 10, 10, 100, 20) $btnCloseChild = GUICtrlCreateButton("Close", 10, 40, 100, 30) GUICtrlSetOnEvent($btnCloseChild, "_ExitChild") ; Display Child GUISetState(@SW_SHOW) ;Wait here till Close button is clicked While $childClose = False ConsoleWrite("Stuck in this loop..." & @LF) Sleep(100) $aMsg = GUIGetMsg(1) If $aMsg[0] >0 Then _ArrayDisplay($aMsg) Wend EndFunc Func _ExitMain() Exit EndFunc Func _ExitChild() ConsoleWrite("Exit Child Called") $childValue = GUICtrlRead($txtOperation) $childClose = True GUIDelete($hChild) EndFunc Thanks in advance for any help offered.
      My other alternative is to create a separate EXE for the child window and use ShellExecuteWait to wait for the child window to close before the loop continues, but I am hoping to avoid doing that.
    • By sudeepjd
      I am building an application which needs a child panel in the GUI Control that needs to be scrolled as it contains controls that extend beyond the panel height. But I also need to have the users to be able to Tab through those controls. I don't seem to be able to to both working together. 
      The Tabstops can be allowed on children by using $WS_EX_CONTROLPARENT and the Scrollbar creation using the GUIScrollBar.au3.
      If I set the $WS_EX_CONTROLPARENT it drags the entire child and does not allow the scroll, but if I remove it, the Scroll works but the tabstops don't. Please see the below sample application that can help reproduce this problem.
       
      #include <GUIConstants.au3> #include <GUIScrollbars.au3> #include <WindowsConstants.au3> Opt("GUIOnEventMode", 1) ; Change to OnEvent mode Global $width=500, $height=500, $titel="Tabtest in Childwindow" ; create the parentwindow $mainwindow = GUICreate($titel, $width, $height, -1, -1) GUISetBkColor(0x00ffff) ; show the parentwindow GUISetState(@SW_SHOW,$mainwindow) ; check on screen sleep(1000) ; create the childwindow with the scrollbars active ->TABSTOPS Dont work $childwindo1 = GUICreate("child", 220,$height, 10 ,0,$WS_CHILD, -1 ,$mainwindow) _GUIScrollBars_Init($childwindo1, 100, 100) GUISetBkColor(0xff0000, $childwindo1) GUISetState(@SW_SHOW, $childwindo1) $input_1 = GUICtrlCreateInput("Scroll Works",10,10) $input_2 = GUICtrlCreateInput("Tab Does Not",10,40) ; create the childwindow with the scrollbars active ->TABSTOPS Work, Scroll does not because window moves $childwindo2 = GUICreate("child", 220, $height, 240 ,0,$WS_CHILD, $WS_EX_CONTROLPARENT ,$mainwindow) _GUIScrollBars_Init($childwindo2, 100, 100) GUISetBkColor(0xff0000, $childwindo2) GUISetState(@SW_SHOW, $childwindo2) $input_3 = GUICtrlCreateInput("Tab Works",10,10) $input_4 = GUICtrlCreateInput("Scroll Does Not",10,40) GUIRegisterMsg($WM_VSCROLL, "WM_VSCROLL") ; register close GUISetOnEvent($GUI_EVENT_CLOSE, "close_it",$mainwindow) ;loop While 1 Sleep(100) ; Idle around WEnd Func close_it() ; exit application GUIDelete($mainwindow) exit EndFunc $childwindo = GUICreate("child",$width,$height,0,0,$WS_CHILD,-1,$mainwindow) GUISetBkColor(0xff0000) GUISetState(@SW_SHOW,$childwindo) Func WM_VSCROLL($hWnd, $iMsg, $wParam, $lParam) #forceref $iMsg, $wParam, $lParam Local $iScrollCode = BitAND($wParam, 0x0000FFFF) Local $iIndex = -1, $iCharY, $iPosY Local $iMin, $iMax, $iPage, $iPos, $iTrackPos For $x = 0 To UBound($__g_aSB_WindowInfo) - 1 If $__g_aSB_WindowInfo[$x][0] = $hWnd Then $iIndex = $x $iCharY = $__g_aSB_WindowInfo[$iIndex][3] ExitLoop EndIf Next If $iIndex = -1 Then Return 0 ; Get all the vertial scroll bar information Local $tSCROLLINFO = _GUIScrollBars_GetScrollInfoEx($hWnd, $SB_VERT) $iMin = DllStructGetData($tSCROLLINFO, "nMin") $iMax = DllStructGetData($tSCROLLINFO, "nMax") $iPage = DllStructGetData($tSCROLLINFO, "nPage") ; Save the position for comparison later on $iPosY = DllStructGetData($tSCROLLINFO, "nPos") $iPos = $iPosY $iTrackPos = DllStructGetData($tSCROLLINFO, "nTrackPos") Switch $iScrollCode Case $SB_TOP ; user clicked the HOME keyboard key DllStructSetData($tSCROLLINFO, "nPos", $iMin) Case $SB_BOTTOM ; user clicked the END keyboard key DllStructSetData($tSCROLLINFO, "nPos", $iMax) Case $SB_LINEUP ; user clicked the top arrow DllStructSetData($tSCROLLINFO, "nPos", $iPos - 1) Case $SB_LINEDOWN ; user clicked the bottom arrow DllStructSetData($tSCROLLINFO, "nPos", $iPos + 1) Case $SB_PAGEUP ; user clicked the scroll bar shaft above the scroll box DllStructSetData($tSCROLLINFO, "nPos", $iPos - $iPage) Case $SB_PAGEDOWN ; user clicked the scroll bar shaft below the scroll box DllStructSetData($tSCROLLINFO, "nPos", $iPos + $iPage) Case $SB_THUMBTRACK ; user dragged the scroll box DllStructSetData($tSCROLLINFO, "nPos", $iTrackPos) EndSwitch ; // Set the position and then retrieve it. Due to adjustments ; // by Windows it may not be the same as the value set. DllStructSetData($tSCROLLINFO, "fMask", $SIF_POS) _GUIScrollBars_SetScrollInfo($hWnd, $SB_VERT, $tSCROLLINFO) _GUIScrollBars_GetScrollInfo($hWnd, $SB_VERT, $tSCROLLINFO) ;// If the position has changed, scroll the window and update it $iPos = DllStructGetData($tSCROLLINFO, "nPos") If ($iPos <> $iPosY) Then _GUIScrollBars_ScrollWindow($hWnd, 0, $iCharY * ($iPosY - $iPos)) $iPosY = $iPos EndIf Return $GUI_RUNDEFMSG EndFunc ;==>WM_VSCROLL  
      Any help to get both working together is appreciated.
      Thanks,
      Sudeep.
    • By Atrax27
      I have a webpage that I would like to Focus the Input on a particular field, which is not automatically set as the initial input.
       
      Website:
      https://fiscaloffice.summitoh.net/PropertyTaxValues/PayTaxCC.htm
       
      I want to just simply use the Send(“154xxx”) into the “Parcel” field, then Send(“{ENTER}”) without cycling through tab presses each time before getting to the correct inputbox, where number of tab press numbers might change depending on a few things (using either IE, chrome, etc). On most websites I try this with, the “Login ID” field is the first one that the cursor jumps to so all I do is just start a Send command, but here I can’t do that since it’s not the initial cursor location.
       
      I’ve read a few things on the forums about “_WinAPI_SetFocus” but that appears to work on AutoIT generated form fields only (see below code), I don’t know how to translate it for website use, thanks for any help!
       
      #include <GUIConstantsEx.au3> #Include <WinAPI.au3>   $hGUI = GUICreate("Test", 500, 500) $hInput = GUICtrlCreateInput("", 10, 10, 400, 20) GUICtrlCreateButton("Test", 10, 100, 80, 30) GUICtrlSetState(-1, $GUI_FOCUS)   GUISetState() Sleep(5000) _WinAPI_SetFocus(ControlGetHandle("Test", "", $hInput)) While 1     Switch GUIGetMsg()         Case $GUI_EVENT_CLOSE             Exit     EndSwitch WEnd  
         
    • By paradox109
      Hello, 
      I have A simple question about http request. What would be the fastest way to send mupltiple http request at the same time with autoit? The only way i figured  out was to to start multiple processes. This way works fine but its not really a good way. What user would like to see 15 processes running in the background at the same time. I know multithread is also not available in autoit.
    • By ni3dprint
      Hi folks, 
      Thank you so much in advance for your help!  I've been using AUTOIT for manipulating gcode.  So far I've just worked through the excellent help examples and although I'm sure the resulting code is clumsy it has functioned  
      However now I'm trying to improve and advance things and I've stumbled across REGEX.. and I'm a bit stuck.  What I would like to be able to do is to 'move'/'transform' the gcode in a file and re-write it to a new file.  I only need to move it in one direction(X).  At the heart of this I need a script to extract all the X values and then ADD or SUBTRACT an adjustment factor to transform and rewrite the code accordingly.
      So far using an example script and an example input -
      Func Test2()
      Local $iMove = -4
          Local $sInput = '"G1 X45.036 Y6.934 F7800.000 G1 Z0.600 F7800.000 G1 F900 G1 X48.036 Y1.076 E0.58925"'
          Local $sOutput = StringRegExpReplace($sInput, '(?<=[X])\d+.\d+', '\0')
          Display($sInput, $sOutput)
      EndFunc   ;==>Test2
      This identifies the correct values i.e 45.036 and 48.036 but is there a way to dyamically adjust them before they are replaced, by for example a factor of -4 ($iMove above).  So far I can't seem to do math on the '\0' value i.e '\0'+ -4 ?
      Many thanks for your time and expertise!
       
×
×
  • Create New...