Jump to content

Aut2exe add file version


Go to solution Solved by guinness,

Recommended Posts

Good Afternoon,

I am running the latest version of Autoit 3.3.10.2 and the lasted version of the SciTE. I am trying to figure out how I can get the file version to show when I compile a script. I have used SciTE and Aut2exe and the result is same. The compiled exe shows file version 0.0.0.0 whereas, prior to 3.3.10.x (3.3.8.X) when the script was compiled the exe file would show the correct (autoit) file version.

I am attaching 2 screenshot that will show what I am talking about. I have used various commands like #AutoIt3Wrapper_Res_Fileversion=3.3.10.2, #Autoit3wrapper_Res_Version=3.3.10.2, each with no luck. Any help would be greatly appreciated.

Thanks

Grimm

post-76479-0-30573600-1389395494_thumb.p

post-76479-0-49596400-1389395683_thumb.p

Edited by grimmlock

Thanks

Grimm

Link to post
Share on other sites
  • Solution

Look at using the new #pragma directive for the version number assignment. Oh, and look at AutoIt3WrapperToPragma  (signature) to convert AutoItWrapper directives to pragma for you in one click.

#pragma
Edited by guinness

UDF List:

 
_AdapterConnections()_AlwaysRun()_AppMon()_AppMonEx()_ArrayFilter/_ArrayReduce_BinaryBin()_CheckMsgBox()_CmdLineRaw()_ContextMenu()_ConvertLHWebColor()/_ConvertSHWebColor()_DesktopDimensions()_DisplayPassword()_DotNet_Load()/_DotNet_Unload()_Fibonacci()_FileCompare()_FileCompareContents()_FileNameByHandle()_FilePrefix/SRE()_FindInFile()_GetBackgroundColor()/_SetBackgroundColor()_GetConrolID()_GetCtrlClass()_GetDirectoryFormat()_GetDriveMediaType()_GetFilename()/_GetFilenameExt()_GetHardwareID()_GetIP()_GetIP_Country()_GetOSLanguage()_GetSavedSource()_GetStringSize()_GetSystemPaths()_GetURLImage()_GIFImage()_GoogleWeather()_GUICtrlCreateGroup()_GUICtrlListBox_CreateArray()_GUICtrlListView_CreateArray()_GUICtrlListView_SaveCSV()_GUICtrlListView_SaveHTML()_GUICtrlListView_SaveTxt()_GUICtrlListView_SaveXML()_GUICtrlMenu_Recent()_GUICtrlMenu_SetItemImage()_GUICtrlTreeView_CreateArray()_GUIDisable()_GUIImageList_SetIconFromHandle()_GUIRegisterMsg()_GUISetIcon()_Icon_Clear()/_Icon_Set()_IdleTime()_InetGet()_InetGetGUI()_InetGetProgress()_IPDetails()_IsFileOlder()_IsGUID()_IsHex()_IsPalindrome()_IsRegKey()_IsStringRegExp()_IsSystemDrive()_IsUPX()_IsValidType()_IsWebColor()_Language()_Log()_MicrosoftInternetConnectivity()_MSDNDataType()_PathFull/GetRelative/Split()_PathSplitEx()_PrintFromArray()_ProgressSetMarquee()_ReDim()_RockPaperScissors()/_RockPaperScissorsLizardSpock()_ScrollingCredits_SelfDelete()_SelfRename()_SelfUpdate()_SendTo()_ShellAll()_ShellFile()_ShellFolder()_SingletonHWID()_SingletonPID()_Startup()_StringCompact()_StringIsValid()_StringRegExpMetaCharacters()_StringReplaceWholeWord()_StringStripChars()_Temperature()_TrialPeriod()_UKToUSDate()/_USToUKDate()_WinAPI_Create_CTL_CODE()_WinAPI_CreateGUID()_WMIDateStringToDate()/_DateToWMIDateString()Au3 script parsingAutoIt SearchAutoIt3 PortableAutoIt3WrapperToPragmaAutoItWinGetTitle()/AutoItWinSetTitle()CodingDirToHTML5FileInstallrFileReadLastChars()GeoIP databaseGUI - Only Close ButtonGUI ExamplesGUICtrlDeleteImage()GUICtrlGetBkColor()GUICtrlGetStyle()GUIEventsGUIGetBkColor()Int_Parse() & Int_TryParse()IsISBN()LockFile()Mapping CtrlIDsOOP in AutoItParseHeadersToSciTE()PasswordValidPasteBinPosts Per DayPreExpandProtect GlobalsQueue()Resource UpdateResourcesExSciTE JumpSettings INISHELLHOOKShunting-YardSignature CreatorStack()Stopwatch()StringAddLF()/StringStripLF()StringEOLToCRLF()VSCROLLWM_COPYDATAMore Examples...

Updated: 22/04/2018

Link to post
Share on other sites
  • Developers

Good Afternoon,

I am running the latest version of Autoit 3.3.10.2 and the lasted version of the SciTE. I am trying to figure out how I can get the file version to show when I compile a script. I have used SciTE and Aut2exe and the result is same. The compiled exe shows file version 0.0.0.0 whereas, prior to 3.3.10.x (3.3.8.X) when the script was compiled the exe file would show the correct (autoit) file version.

I am attaching 2 screenshot that will show what I am talking about. I have used various commands like #AutoIt3Wrapper_Res_Fileversion=3.3.10.2, #Autoit3wrapper_Res_Version=3.3.10.2, each with no luck. Any help would be greatly appreciated.

Thanks

Grimm

 

Using the #Pragma is a good solution but the #AutoIt3Wrapper directives are still working too.

Show the SciTE console output to see what is happening in case you want to fix this.

Jos

SciTE4AutoIt3 Full installer Download page   - Beta files       Read before posting     How to post scriptsource   Forum etiquette  Forum Rules 
 
Live for the present,
Dream of the future,
Learn from the past.
  :)

Link to post
Share on other sites

I have same problem, after I upgraded to latest AutoIt the file version and file description is not working, icon is working. This is from compilation:

>"C:\Program Files (x86)\AutoIt3\SciTE\AutoIt3Wrapper\AutoIt3Wrapper.exe" /prod /in "F:\HDD\vcds.au3"
+>14:08:17 Starting AutoIt3Wrapper v.2.1.0.33    Environment(Language:0409  Keyboard:00000409  OS:WIN_7/Service Pack 1  CPU:X64 OS:X64)
>Running AU3Check (3.3.10.2)  from:C:\Program Files (x86)\AutoIt3
+>14:08:17 AU3Check ended.rc:0
>Running:(3.3.10.2):C:\Program Files (x86)\AutoIt3\aut2exe\aut2exe.exe  /in "F:\HDD\vcds.au3" /out "F:\HDD\vcds.exe" /nopack /icon "F:\HDD\vcds.ico" /comp 2
+>14:08:18 Aut2exe.exe ended.rc:0
>14:08:18 Performing the Program Resource Update steps:
!>14:08:18 Error: Failed to get script data from end of target file.  Skipping resource update.rc:2
+>14:08:18 Created program:F:\HDD\vcds.exe
>Exit code: 0    Time: 2.237

The non-touched source code compiled with previous version did this correctly.

In source code I have this, it's created by Tools->Compile

#Region ;**** Directives created by AutoIt3Wrapper_GUI ****
#AutoIt3Wrapper_Icon=vcds.ico
#AutoIt3Wrapper_Res_Fileversion=1.0.0.0
#EndRegion ;**** Directives created by AutoIt3Wrapper_GUI ****

I also noticed the .exe files have no more the default autoit icon...

Edited by Maintel
Link to post
Share on other sites
  • Developers

Just make sure you upgrade to the Latest version of the SciTE4AutoIt3 package as there were many changes to support the new version of AutoIt3.

Jos

SciTE4AutoIt3 Full installer Download page   - Beta files       Read before posting     How to post scriptsource   Forum etiquette  Forum Rules 
 
Live for the present,
Dream of the future,
Learn from the past.
  :)

Link to post
Share on other sites

I also noticed the .exe files have no more the default autoit icon...

It's discussed in this thread and the one I linked on how to add an icon.

UDF List:

 
_AdapterConnections()_AlwaysRun()_AppMon()_AppMonEx()_ArrayFilter/_ArrayReduce_BinaryBin()_CheckMsgBox()_CmdLineRaw()_ContextMenu()_ConvertLHWebColor()/_ConvertSHWebColor()_DesktopDimensions()_DisplayPassword()_DotNet_Load()/_DotNet_Unload()_Fibonacci()_FileCompare()_FileCompareContents()_FileNameByHandle()_FilePrefix/SRE()_FindInFile()_GetBackgroundColor()/_SetBackgroundColor()_GetConrolID()_GetCtrlClass()_GetDirectoryFormat()_GetDriveMediaType()_GetFilename()/_GetFilenameExt()_GetHardwareID()_GetIP()_GetIP_Country()_GetOSLanguage()_GetSavedSource()_GetStringSize()_GetSystemPaths()_GetURLImage()_GIFImage()_GoogleWeather()_GUICtrlCreateGroup()_GUICtrlListBox_CreateArray()_GUICtrlListView_CreateArray()_GUICtrlListView_SaveCSV()_GUICtrlListView_SaveHTML()_GUICtrlListView_SaveTxt()_GUICtrlListView_SaveXML()_GUICtrlMenu_Recent()_GUICtrlMenu_SetItemImage()_GUICtrlTreeView_CreateArray()_GUIDisable()_GUIImageList_SetIconFromHandle()_GUIRegisterMsg()_GUISetIcon()_Icon_Clear()/_Icon_Set()_IdleTime()_InetGet()_InetGetGUI()_InetGetProgress()_IPDetails()_IsFileOlder()_IsGUID()_IsHex()_IsPalindrome()_IsRegKey()_IsStringRegExp()_IsSystemDrive()_IsUPX()_IsValidType()_IsWebColor()_Language()_Log()_MicrosoftInternetConnectivity()_MSDNDataType()_PathFull/GetRelative/Split()_PathSplitEx()_PrintFromArray()_ProgressSetMarquee()_ReDim()_RockPaperScissors()/_RockPaperScissorsLizardSpock()_ScrollingCredits_SelfDelete()_SelfRename()_SelfUpdate()_SendTo()_ShellAll()_ShellFile()_ShellFolder()_SingletonHWID()_SingletonPID()_Startup()_StringCompact()_StringIsValid()_StringRegExpMetaCharacters()_StringReplaceWholeWord()_StringStripChars()_Temperature()_TrialPeriod()_UKToUSDate()/_USToUKDate()_WinAPI_Create_CTL_CODE()_WinAPI_CreateGUID()_WMIDateStringToDate()/_DateToWMIDateString()Au3 script parsingAutoIt SearchAutoIt3 PortableAutoIt3WrapperToPragmaAutoItWinGetTitle()/AutoItWinSetTitle()CodingDirToHTML5FileInstallrFileReadLastChars()GeoIP databaseGUI - Only Close ButtonGUI ExamplesGUICtrlDeleteImage()GUICtrlGetBkColor()GUICtrlGetStyle()GUIEventsGUIGetBkColor()Int_Parse() & Int_TryParse()IsISBN()LockFile()Mapping CtrlIDsOOP in AutoItParseHeadersToSciTE()PasswordValidPasteBinPosts Per DayPreExpandProtect GlobalsQueue()Resource UpdateResourcesExSciTE JumpSettings INISHELLHOOKShunting-YardSignature CreatorStack()Stopwatch()StringAddLF()/StringStripLF()StringEOLToCRLF()VSCROLLWM_COPYDATAMore Examples...

Updated: 22/04/2018

Link to post
Share on other sites

Just make sure you upgrade to the Latest version of the SciTE4AutoIt3 package as there were many changes to support the new version of AutoIt3.

Jos

 

As most of the visitors, I simple went to http://www.autoitscript.com/site/autoit/downloads/ and downloaded Latest version: v3.3.10.2 and inside is SciTE in version Version 3.2.0, so put in all in one download package SciTE 3.3.7 will be a good idea.

 

It's discussed in this thread and the one I linked on how to add an icon.

 

Ok I got the folder AutoIt3Aut2ExeIcons

Edited by Maintel
Link to post
Share on other sites
  • Developers

As most of the visitors, I simple went to http://www.autoitscript.com/site/autoit/downloads/ and downloaded Latest version: v3.3.10.2 and inside is SciTE in version Version 3.2.0, so put in all in one download package SciTE 3.3.7 will be a good idea.

Not likely that will happen and also doubt it will solve the issue of people not downloading the second installer.

The release cycles aren't similar either, only this time due to the PE changes in AutoIt3.

Jos

Edited by Jos

SciTE4AutoIt3 Full installer Download page   - Beta files       Read before posting     How to post scriptsource   Forum etiquette  Forum Rules 
 
Live for the present,
Dream of the future,
Learn from the past.
  :)

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Mobius
      Last updated 9/10/21

      Features
      Simple Integrated countermeasures against file and memory analysis based decompilers. Add basic types of resources into the interpreter or other types as raw data. Define multiple programs to execute pre and post build. Create and include pe version information. User defined patches that can be implemented globally on the interpreter and compiler or selectively. Handles its own basic macro's as well as environment variables in most fields for easier path finding. Drag and drop configs (script bound or separate) to the input edit box or to the icon to load them. Configuration settings can be copied to the clipboard or saved as config files or Au3 scripts. Settings can now be saved directly to an AutoIt3 script. Subsystem independant, can act as a gui or console tool. And much more. See next post for update information.
      A3C_97.16b.7z
      A3C_97.16b.7z A3C_98_18b.zip
    • By lIlIIlIllIIIIlI
      $input = $CmdLine[1] $bytes = 1000000 ; 1000000 for 1 MB, 1000 for 1 KB $size = FileGetSize($input) $file = fileopen($input, 16) $max = ceiling($size / $bytes) for $i = 1 to $max $data = fileread($file, $bytes) $output = $input & '_' & $i & 'of' & $max filewrite($output, $data) next ^file split
      file path for a 20MB "video.mp4" is input, it will be output as "video.mp4_1of20", "video.mp4_2of20", etc. change $bytes to affect the split files size, this example made them 1MB (10^6 bytes)
       
      $input = $CmdLine[1] $name = stringtrimright($input, 1 + stringlen($input) - stringinstr($input, '_', 0, -1)) $split = stringsplit($input, 'of', 3) $max = $split[ubound($split) - 1] for $i = 1 to $max $in = $name & '_' & $i & 'of' & $max $file = fileopen($in, 16) $data = fileread($file) fileclose($file) filedelete($in) filewrite($name, $data) next ^ file join
      file path for any of the "video.mp4_Xof20" segments is input. the "video.mp4_Xof20" segments are read and written to "video.mp4" and then deleted, leaving the newly joined "video.mp4" in the end
       
      i made this today because i had a big file that i couldn't really open. i split it into 1000 chunks to make processing and stuff easier. i've also used it to split files to just under 25MB segments so i can attach and mail big files over gmail which is silly but it worked
    • By TheSaint
      I like and have been using TeraCopy, a third party program, for many years. Mostly it is a great program, but it does have some issues. On Windows XP for instance, Thumbs.db files could often hold up a copy or move process until the user manually responded to the error prompt. Some other issues I discuss below.
      PLEASE NOTE - I am not related to or affiliated in any way with the 3rd party TeraCopy program developers.
      ALSO NOTE - I myself have only tested TeraCopy Cure at this point, on Windows 7 (32 bit), and only with the free version of TeraCopy 2.27.
      This program, TeraCopy Cure, is related to another one of my TeraCopy assistant programs, TeraCopy Timer, but aims at being simpler and quicker to use ... if lacking its more advanced features.
      TeraCopy Cure is a frontend for TeraCopy and sets out to make up for its flaws and limitations.
      One of those flaws is queuing order, and the limitation relates to a same destination issue.
      You would think that queue order would be the same as add order, but that is not the case, and if you are doing a mix of COPY and MOVE then the COPY process could easily fail. It could fail with some source items, even if the  COPY process has already started before the same source MOVE process begins ... especially if the destination folder is on the source drive ... only the currently copying file is locked to that process.
      If you drag and drop another source for a same destination as an existing or impending COPY or MOVE process, then usually TeraCopy nicely adds it for you to that existing job. However, you might wish to avoid that, or it might occur during the testing phase of that active process, and then not be properly processed etc. But you are not given a choice and it just gets added.
       
           
      HOW TO USE
      See the right-click menu of the 'Batch List' (lowest field) and the right-click menu of the Tree field, for some useful options.
      (1) If desired, enable 'Auto Start'. NOTE - Even if enabled, this can be bypassed.
      (2) Set the destination folder, either by browsing on the tree or by dragging a folder to the Destination input field or label. Right-clicking on a folder in Explorer will also work, if enabled. The destination folder path will also show in the Tree if that right-click option is enabled.
      (3) Then drag & drop source file or folder onto one of three five areas - Folder (Drive) Tree field, or COPY or MOVE buttons ... this now also includes the source input and label.
      NOTE - If the Folder (Drive) Tree field is used, then you will additionally need to click either the COPY or MOVE button, to have that job added to the Batch List ... but this avoids 'Auto Start' if it is enabled. Drag & dropping to the buttons instead, saves on clicking, but starts the first job etc immediately if 'Auto Start' is enabled.
      (4) If needed and ready, click the START button to run the first job and those that follow.
      More information is included in program and in the NOTES etc sections below.
         
      WARNING - Depending on the amount of content on your destination drive, and folder level depth, and the speed of your PC, display of the full path in the Folder (Drive) Tree can take a while to show ... if you have that (right-click) option enabled ... it isn't by default. I found this feature quite tricky to get right, and I'm still not 100% sure it is now full-proof.
      TeraCopy Cure v1.5.zip  (source is included)
      TeraCopy Cure v1.6.zip  (source is included)
      NOTES
      UPDATES INFORMATION
      OLDER DOWNLOADS
       
    • By Zedna
      #include <WinAPI.au3> $text = FileReadLastChars("C:\Program Files\AutoIt3\Include\Array.au3", 1024) MsgBox(0, 'FileReadLastChars', $text) Func FileReadLastChars($sFile, $nChars)     Local $nBytes     $tBuffer = DLLStructCreate("char["&$nChars&"]")     $hFile = _WinAPI_CreateFile($sFile, 2, 2) ; open for read     _WinAPI_SetFilePointer($hFile, -1 * $nChars, 2) ; from end     _WinAPI_ReadFile($hFile, DLLStructGetPtr($tBuffer), $nChars, $nBytes)     _WinAPI_CloseHandle($hFile)     Return DLLStructGetData($tBuffer, 1) EndFunc ; included as standard UDF since AutoIt 3.2.13.6 version Func _WinAPI_SetFilePointer($hFile, $iPos, $iMethod = 0)     $aResult = DllCall( "kernel32.dll", "long", "SetFilePointer", "hwnd", $hFile, "long", $iPos, "long_ptr", 0, "long", $iMethod)     If @error Then Return SetError(1, 0, -1)     If $aResult[0] = -1 Then Return SetError(2, 0, -1) ; $INVALID_SET_FILE_POINTER = -1     Return $aResult[0] EndFunc ;==>_WinAPI_SetFilePointer Here is my topic about _WinAPI_SetFilePointer()
       
      EDIT: simpler version compatible with latest AutoIt
      $text = FileReadLastChars("C:\Program Files\AutoIt3\Include\Array.au3", 1024) MsgBox(0, 'FileReadLastChars', $text) Func FileReadLastChars($sFile , $nChars) $hFile = FileOpen($sFile, 0) ; open for read FileSetPos($hFile, -1 * $nChars, 2) ; from end $sRet = FileRead($hFile) FileClose($hFile) Return $sRet EndFunc  
    • By HenryJiu
      Hello!
      I have a question , about Mac and Autoit3.
      I want to convert my script to Mac App,but Aut2Exe just convert to EXE!
      So I asked if there was a way to convert scripts to MAC App
      My English isn't very good,so don't laugh please😃
×
×
  • Create New...