Stop a search using RecFileListToArray

MyEarth · February 10, 2014

Like title, i need a way to stop the search. The reason is i need to collect many files and it takes a while on my old PC so if i can stop the Func() in a whatever point using a button like the example in the wiki (http://www.autoitscript.com/wiki/Interrupting_a_running_function, the version with _WM_COMMAND + $fInterrupt)

I don't need an unfinished list, just stop the research so i can continue with other task, close the script etc.

Thanks

Edited February 10, 2014 by MyEarth

Melba23 · February 10, 2014

MyEarth,

You can use the same techniques as explained in the Interrupting a running function tutorial in the Wiki to break into this function just as any other - but you will need to add a suitable check inside it.

Here is a modified version of the UDF which looks for an interrupt - look for the <<<<<<<<<<< lines to see the changes:

#include-once

;#AutoIt3Wrapper_Au3Check_Parameters=-d -w 1 -w 2 -w 3 -w- 4 -w 5 -w 6 -w- 7

; #INDEX# =======================================================================================================================
; Title .........: _RecFileListToArray
; AutoIt Version : v3.3.1.1 or higher
; Language ......: English
; Description ...: Lists files and\or folders in specified path with optional recursion to defined level and result sorting
; Note ..........:
; Author(s) .....: Melba23
; Remarks .......: - Modified Array.au3 functions - credit: wraithdu, Ultima
;                  - SRE patterns - credit: various forum members
;                  - DllCall code suggestion - credit: guinness
;                  - Despite the name, this UDF is iterative, not recursive
; ===============================================================================================================================

; #CURRENT# =====================================================================================================================
; _RecFileListToArray: Lists files and\or folders in a specified path with optional recursion to defined level and result sorting
; ===============================================================================================================================

; #INTERNAL_USE_ONLY#============================================================================================================
; _RFLTA_ListToMask ......; Convert include/exclude lists to SRE format
; _RFLTA_AddToList .......; Add element to list which is resized if necessary
; _RFLTA_AddFileLists ....; Add internal lists after resizing and optional sorting
; _RFLTA_ArraySort .......; Wrapper for QuickSort function
; _RFLTA_ArrayConcatenate : Join 2 arrays
; ===============================================================================================================================

; #FUNCTION# ====================================================================================================================
; Name...........: _RecFileListToArray
; Description ...: Lists files and\or folders in a specified path with optional recursion to defined level and result sorting
; Syntax.........: _RecFileListToArray($sPath[, $sMask = "*"[, $iReturn = 0[, $iRecur = 0[, $iSort = 0[, $iReturnPath = 1[, $sExclude_List = ""[, $sExclude_List_Folder]]]]]]])
; Parameters ....: $sPath - Initial path used to generate filelist
;                               If path ends in \ then folders will be returned with an ending \
;                               If path lengths > 260 chars, prefix path with "\\?\" - return paths are not affected
;                  $sMask - Optional: Filter for result. Multiple filters must be separated by ";"
;                           Use "|" to separate 3 possible sets of filters: "Include|Exclude|Exclude_Folders"
;                               Include = Files/Folders to include (default = "*" [all])
;                               Exclude = Files/Folders to exclude (default = "" [none])
;                               Exclude_Folders = only used if basic $iReturn = 0 AND $iRecur = 1 to exclude defined folders (default = "" [none])
;                  $iReturn - Optional: specifies whether to return files, folders or both and omits those with certain attributes
;                              0 - Return both files and folders (Default)
;                                   If non-recursive Include/Exclude_List applies to files and folders
;                                   If recursive Include/Exclude_List applies to files only, all folders are searched unless excluded using $sExclude_List_Folder
;                              1 - Return files only    - Include/Exclude_List applies to files only, all folders searched if recursive
;                              2 - Return folders only  - Include/Exclude_List applies to folders only for searching and return
;                                   Add one or more of the following to $iReturn to omit files/folders with that attribute
;                                   + 4  - Hidden files and folders
;                                   + 8  - System files and folders
;                                   + 16 - Link/junction folders
;                                   Note:  Omitting files/folders uses a different search algorithm and takes approx 50% longer
;                  $iRecur - Optional: specifies whether to search recursively in subfolders and to what level
;                             1 - Search in all subfolders (unlimited recursion)
;                             0 - Do not search in subfolders (Default)
;                             Negative integer - Search in subfolders to specified depth
;                  $iSort - Optional: sort ordered in alphabetical and depth order
;                             0 - Not sorted (Default)
;                             1 - Sorted
;                             2 - Sorted with faster algorithm (assumes files sorted within each folder - requires NTFS drive)
;                  $iReturnPath - Optional: specifies displayed path of results
;                             0 - File/folder name only
;                             1 - Relative to initial path (Default)
;                             2 - Full path included
;
; Requirement(s).: v3.3.1.1 or higher
; Return values .: Success: One-dimensional array made up as follows:
;                            [0] = Number of Files\Folders returned
;                            [1] = 1st File\Folder
;                            [2] = 2nd File\Folder
;                            ...
;                            [n] = nth File\Folder
;                   Failure: Null string and @error = 1 with @extended set as follows:
;                            1 = Path not found or invalid
;                            2 = Invalid $sInclude_List
;                            3 = Invalid $iReturn
;                            4 = Invalid $iRecur
;                            5 = Invalid $iSort
;                            6 = Invalid $iReturnPath
;                            7 = Invalid $sExclude_List
;                            8 = Invalid $sExclude_List_Folder
;                            9 = No files/folders found
;                            10 = Interrupted ; <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
; Author ........: Melba23
; Remarks .......: Compatible with existing _FileListToArray syntax
; Related .......:
; Link ..........;
; Example .......; Yes
; ===============================================================================================================================
Func _RecFileListToArray_Int($sInitialPath, $sMask = "*", $iReturn = 0, $iRecur = 0, $iSort = 0, $iReturnPath = 1)

    Local $asReturnList[100] = [0], $asFileMatchList[100] = [0], $asRootFileMatchList[100] = [0], $asFolderMatchList[100] = [0], $asFolderSearchList[100] = [1]
    Local $sFolderSlash = "", $iMaxLevel, $sInclude_File_Mask, $sExclude_File_Mask, $sInclude_Folder_Mask = ".+", $sExclude_Folder_Mask = ":"
    Local $hSearch, $fFolder, $sRetPath = "", $sCurrentPath, $sName, $iAttribs, $iHide_HS = 0, $iHide_Link = 0, $fLongPath = False
    Local $asFolderFileSectionList[100][2] = [[0, 0]], $sFolderToFind, $iFileSectionStartIndex, $iFileSectionEndIndex
    Local $sInclude_List, $sExclude_List, $sExclude_List_Folder

    ; Check for valid path
    If StringLeft($sInitialPath, 4) == "\\?\" Then
        $fLongPath = True
    EndIf
    If Not FileExists($sInitialPath) Then Return SetError(1, 1, "")
    ; Check if folders should have trailing \ and ensure that initial path does have one
    If StringRight($sInitialPath, 1) = "\" Then
        $sFolderSlash = "\"
    Else
        $sInitialPath = $sInitialPath & "\"
    EndIf
    ; Add path to folder search list
    $asFolderSearchList[1] = $sInitialPath

    ; Check for H or S omitted
    If BitAND($iReturn, 4) Then
        $iHide_HS += 2
        $iReturn -= 4
    EndIf
    If BitAND($iReturn, 8) Then
        $iHide_HS += 4
        $iReturn -= 8
    EndIf

    ; Check for link/junction omitted
    If BitAND($iReturn, 16) Then
        $iHide_Link = 1024
        $iReturn -= 16
    EndIf

    ; Check for valid recur value
    If $iRecur > 1 Or Not IsInt($iRecur) Then Return SetError(1, 4, "")
    ; If required, determine \ count for max recursive level setting
    If $iRecur < 0 Then
        StringReplace($sInitialPath, "\", "", 0, 2)
        $iMaxLevel = @extended - $iRecur
    EndIf

    ; Check mask parameter
    Local $aMaskSplit = StringSplit($sMask, "|")
    ; Check for multiple sections and set values
    Switch $aMaskSplit[0]
        Case 3
            $sExclude_List_Folder = $aMaskSplit[3]
            ContinueCase
        Case 2
            $sExclude_List = $aMaskSplit[2]
            ContinueCase
        Case 1
            $sInclude_List = $aMaskSplit[1]
    EndSwitch

    ; Create Include mask for files
    If $sInclude_List = "*" Then
        $sInclude_File_Mask = ".+"
    Else
        If Not _RFLTA_ListToMask($sInclude_File_Mask, $sInclude_List) Then Return SetError(1, 2, "")
    EndIf
    ; Set Include mask for folders
    Switch $iReturn
        Case 0
            ; Folders affected by mask if not recursive
            Switch $iRecur
                Case 0
                    ; Folders match mask for compatibility
                    $sInclude_Folder_Mask = $sInclude_File_Mask
            EndSwitch
        Case 2
            ; Folders affected by mask
            $sInclude_Folder_Mask = $sInclude_File_Mask
    EndSwitch

    ; Create Exclude List mask for files
    If $sExclude_List = "" Then
        $sExclude_File_Mask = ":" ; Set unmatchable mask
    Else
        If Not _RFLTA_ListToMask($sExclude_File_Mask, $sExclude_List) Then Return SetError(1, 7, "")
    EndIf

    ; Create Exclude mask for folders
    If $iRecur Then
        If $sExclude_List_Folder Then
            If Not _RFLTA_ListToMask($sExclude_Folder_Mask, $sExclude_List_Folder) Then Return SetError(1, 8, "")
        EndIf
        ; If folders only
        If $iReturn = 2 Then
            ; Folders affected by normal mask
            $sExclude_Folder_Mask = $sExclude_File_Mask
        EndIf
    Else
        ; Folders affected by normal mask
        $sExclude_Folder_Mask = $sExclude_File_Mask
    EndIf

    ; Verify other parameters
    If Not ($iReturn = 0 Or $iReturn = 1 Or $iReturn = 2) Then Return SetError(1, 3, "")
    If Not ($iSort = 0 Or $iSort = 1 Or $iSort = 2) Then Return SetError(1, 5, "")
    If Not ($iReturnPath = 0 Or $iReturnPath = 1 Or $iReturnPath = 2) Then Return SetError(1, 6, "")

    ; Prepare for DllCall if required
    If $iHide_HS Or $iHide_Link Then
        Local $tFile_Data = DllStructCreate("struct;align 4;dword FileAttributes;uint64 CreationTime;uint64 LastAccessTime;uint64 LastWriteTime;" & _
                "dword FileSizeHigh;dword FileSizeLow;dword Reserved0;dword Reserved1;wchar FileName[260];wchar AlternateFileName[14];endstruct")
        Local $pFile_Data = DllStructGetPtr($tFile_Data), $hDLL = DllOpen('kernel32.dll'), $aDLL_Ret
    EndIf

    ; Search within listed folders
    While $asFolderSearchList[0] > 0

        ; Set path to search
        $sCurrentPath = $asFolderSearchList[$asFolderSearchList[0]]

        ; Reduce folder search list count
        $asFolderSearchList[0] -= 1

        ; Determine return path to add to file/folder name
        Switch $iReturnPath
            ; Case 0 ; Name only
            ; Leave as ""
            Case 1 ;Relative to initial path
                $sRetPath = StringReplace($sCurrentPath, $sInitialPath, "")
            Case 2 ; Full path
                If $fLongPath Then
                    $sRetPath = StringTrimLeft($sCurrentPath, 4)
                Else
                    $sRetPath = $sCurrentPath
                EndIf
        EndSwitch

        ; Get search handle - use code matched to required listing
        If $iHide_HS Or $iHide_Link Then
            ; Use DLL code
            $aDLL_Ret = DllCall($hDLL, 'ptr', 'FindFirstFileW', 'wstr', $sCurrentPath & "*", 'ptr', $pFile_Data)
            If @error Or Not $aDLL_Ret[0] Then
                ContinueLoop
            EndIf
            $hSearch = $aDLL_Ret[0]
        Else
            ; Use native code
            $hSearch = FileFindFirstFile($sCurrentPath & "*")
            ; If folder empty move to next in list
            If $hSearch = -1 Then
                ContinueLoop
            EndIf
        EndIf

        ; If sorting files and folders with paths then store folder name and position of associated files in list
        If $iReturn = 0 And $iSort And $iReturnPath Then
            _RFLTA_AddToList($asFolderFileSectionList, $sRetPath, $asFileMatchList[0] + 1)
        EndIf

        ConsoleWrite("Searching: " & $sCurrentPath & @CRLF) ; <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

        ; Search folder - use code matched to required listing
        While 1
            ; Use DLL code
            If $iHide_HS Or $iHide_Link Then
                ; Use DLL code
                $aDLL_Ret = DllCall($hDLL, 'int', 'FindNextFileW', 'ptr', $hSearch, 'ptr', $pFile_Data)
                ; Check for end of folder
                If @error Or Not $aDLL_Ret[0] Then
                    ExitLoop
                EndIf

                ; Extract data
                $sName = DllStructGetData($tFile_Data, "FileName")
                ; Check for .. return - only returned by the DllCall
                If $sName = ".." Then
                    ContinueLoop
                EndIf
                $iAttribs = DllStructGetData($tFile_Data, "FileAttributes")
                ; Check for hidden/system attributes and skip if found
                If $iHide_HS And BitAND($iAttribs, $iHide_HS) Then
                    ContinueLoop
                EndIf
                ; Check for link attribute and skip if found
                If $iHide_Link And BitAND($iAttribs, $iHide_Link) Then
                    ContinueLoop
                EndIf
                ; Set subfolder flag
                $fFolder = 0
                If BitAND($iAttribs, 16) Then
                    $fFolder = 1
                EndIf
            Else
                ; Use native code
                $sName = FileFindNextFile($hSearch)
                ; Check for end of folder
                If @error Then
                    ExitLoop
                EndIf
                ; Set subfolder flag - @extended set in 3.3.1.1 +
                $fFolder = @extended
            EndIf

            ; If folder then check whether to add to search list
            If $fFolder Then
                Select
                    Case $iRecur < 0 ; Check recur depth
                        StringReplace($sCurrentPath, "\", "", 0, 2)
                        If @extended < $iMaxLevel Then
                            ContinueCase ; Check if matched to masks
                        EndIf
                    Case $iRecur = 1 ; Full recur
                        If Not StringRegExp($sName, $sExclude_Folder_Mask) Then ; Add folder unless excluded
                            _RFLTA_AddToList($asFolderSearchList, $sCurrentPath & $sName & "\")
                        EndIf
                        ; Case $iRecur = 0 ; Never add
                        ; Do nothing
                EndSelect
            EndIf

            If $iSort Then ; Save in relevant folders for later sorting

                If $fFolder Then
                    If StringRegExp($sName, $sInclude_Folder_Mask) And Not StringRegExp($sName, $sExclude_Folder_Mask) Then
                        _RFLTA_AddToList($asFolderMatchList, $sRetPath & $sName & $sFolderSlash)
                    EndIf
                Else
                    If StringRegExp($sName, $sInclude_File_Mask) And Not StringRegExp($sName, $sExclude_File_Mask) Then
                        ; Select required list for files
                        If $sCurrentPath = $sInitialPath Then
                            _RFLTA_AddToList($asRootFileMatchList, $sRetPath & $sName)
                        Else
                            _RFLTA_AddToList($asFileMatchList, $sRetPath & $sName)
                        EndIf
                    EndIf
                EndIf

            Else ; Save directly in return list
                If $fFolder Then
                    If $iReturn <> 1 And StringRegExp($sName, $sInclude_Folder_Mask) And Not StringRegExp($sName, $sExclude_Folder_Mask) Then
                        _RFLTA_AddToList($asReturnList, $sRetPath & $sName & $sFolderSlash)
                    EndIf
                Else
                    If $iReturn <> 2 And StringRegExp($sName, $sInclude_File_Mask) And Not StringRegExp($sName, $sExclude_File_Mask) Then
                        _RFLTA_AddToList($asReturnList, $sRetPath & $sName)
                    EndIf
                EndIf
            EndIf

        WEnd

        ; Close current search
        FileClose($hSearch)

        ; Look for interrupt ; <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
        ConsoleWrite("Checking for interrupt inside RFLTA" & @CRLF)
        If $RFLTA_Interrupt Then
            ConsoleWrite("Interrupt " & $RFLTA_Interrupt & " received" & @CRLF)
            ExitLoop
        EndIf

    WEnd

    ; Close the DLL if needed
    If $iHide_HS Then
        DllClose($hDLL)
    EndIf

    ; Check if interrupted ; <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
    If $RFLTA_Interrupt Then
        Return SetError(1, 10, "")
    EndIf

    If $iSort Then
        ; Check if any file/folders have been added depending on required return
        Switch $iReturn
            Case 0 ; If no folders then number of files is immaterial
                If $asRootFileMatchList[0] = 0 And $asFolderMatchList[0] = 0 Then Return SetError(1, 9, "")
            Case 1
                If $asRootFileMatchList[0] = 0 And $asFileMatchList[0] = 0 Then Return SetError(1, 9, "")
            Case 2
                If $asFolderMatchList[0] = 0 Then Return SetError(1, 9, "")
        EndSwitch

        Switch $iReturn
            Case 2 ; Folders only
                ; Correctly size folder match list
                ReDim $asFolderMatchList[$asFolderMatchList[0] + 1]
                ; Copy size folder match array
                $asReturnList = $asFolderMatchList
                ; Simple sort list
                _RFLTA_ArraySort($asReturnList, 1, $asReturnList[0])
            Case 1 ; Files only
                If $iReturnPath = 0 Then ; names only so simple sort suffices
                    ; Combine file match lists
                    _RFLTA_AddFileLists($asReturnList, $asRootFileMatchList, $asFileMatchList)
                    ; Simple sort combined file list
                    _RFLTA_ArraySort($asReturnList, 1, $asReturnList[0])
                Else
                    ; Combine sorted file match lists
                    _RFLTA_AddFileLists($asReturnList, $asRootFileMatchList, $asFileMatchList, 1)
                EndIf
            Case 0 ; Both files and folders
                If $iReturnPath = 0 Then ; names only so simple sort suffices
                    ; Combine file match lists
                    _RFLTA_AddFileLists($asReturnList, $asRootFileMatchList, $asFileMatchList)
                    ; Set correct count for folder add
                    $asReturnList[0] += $asFolderMatchList[0]
                    ; Resize and add file match array
                    ReDim $asFolderMatchList[$asFolderMatchList[0] + 1]
                    _RFLTA_ArrayConcatenate($asReturnList, $asFolderMatchList)
                    ; Simple sort final list
                    _RFLTA_ArraySort($asReturnList, 1, $asReturnList[0])
                Else
                    ; Size return list
                    Local $asReturnList[$asFileMatchList[0] + $asRootFileMatchList[0] + $asFolderMatchList[0] + 1]
                    $asReturnList[0] = $asFileMatchList[0] + $asRootFileMatchList[0] + $asFolderMatchList[0]
                    ; Sort root file list
                    _RFLTA_ArraySort($asRootFileMatchList, 1, $asRootFileMatchList[0])
                    ; Add the sorted root files at the top
                    For $i = 1 To $asRootFileMatchList[0]
                        $asReturnList[$i] = $asRootFileMatchList[$i]
                    Next
                    ; Set next insertion index
                    Local $iNextInsertionIndex = $asRootFileMatchList[0] + 1
                    ; Sort folder list
                    _RFLTA_ArraySort($asFolderMatchList, 1, $asFolderMatchList[0])
                    ; Work through folder list
                    For $i = 1 To $asFolderMatchList[0]
                        ; Add folder to return list
                        $asReturnList[$iNextInsertionIndex] = $asFolderMatchList[$i]
                        $iNextInsertionIndex += 1
                        ; Format folder name for search
                        If $sFolderSlash Then
                            $sFolderToFind = $asFolderMatchList[$i]
                        Else
                            $sFolderToFind = $asFolderMatchList[$i] & "\"
                        EndIf
                        ; Find folder in FolderFileSectionList
                        For $j = 1 To $asFolderFileSectionList[0][0]
                            ; If found then deal with files
                            If $sFolderToFind = $asFolderFileSectionList[$j][0] Then
                                ; Set file list indexes
                                $iFileSectionStartIndex = $asFolderFileSectionList[$j][1]
                                If $j = $asFolderFileSectionList[0][0] Then
                                    $iFileSectionEndIndex = $asFileMatchList[0]
                                Else
                                    $iFileSectionEndIndex = $asFolderFileSectionList[$j + 1][1] - 1
                                EndIf
                                ; Sort files
                                If $iSort = 1 Then
                                    _RFLTA_ArraySort($asFileMatchList, $iFileSectionStartIndex, $iFileSectionEndIndex)
                                EndIf
                                ; Add files to return list
                                For $k = $iFileSectionStartIndex To $iFileSectionEndIndex
                                    $asReturnList[$iNextInsertionIndex] = $asFileMatchList[$k]
                                    $iNextInsertionIndex += 1
                                Next
                                ExitLoop
                            EndIf
                        Next
                    Next
                EndIf
        EndSwitch

    Else ; No sort

        ; Check if any file/folders have been added
        If $asReturnList[0] = 0 Then Return SetError(1, 9, "")

        ; Remove any unused return list elements from last ReDim
        ReDim $asReturnList[$asReturnList[0] + 1]

    EndIf

    Return $asReturnList


EndFunc   ;==>_RecFileListToArray

; #INTERNAL_USE_ONLY#============================================================================================================
; Name...........: _RFLTA_ListToMask
; Description ...: Convert include/exclude lists to SRE format
; Syntax ........: _RFLTA_ListToMask(ByRef $sMask, $sList)
; Parameters ....: $asMask - Include/Exclude mask to create
;                  $asList - Include/Exclude list to convert
; Return values .: Success: 1
;                  Failure: 0
; Author ........: SRE patterns developed from those posted by various forum members and Spiff59 in particular
; Remarks .......: This function is used internally by _RecFileListToArray
; ===============================================================================================================================
Func _RFLTA_ListToMask(ByRef $sMask, $sList)

    ; Check for invalid characters within list
    If StringRegExp($sList, "\\|/|:|\<|\>|\|") Then Return 0
    ; Strip WS and insert | for ;
    $sList = StringReplace(StringStripWS(StringRegExpReplace($sList, "\s*;\s*", ";"), 3), ";", "|")
    ; Convert to SRE pattern
    $sList = StringReplace(StringReplace(StringRegExpReplace($sList, "[][$^.{}()+\-]", "\\$0"), "?", "."), "*", ".*?")
    ; Add prefix and suffix
    $sMask = "(?i)^(" & $sList & ")\z"
    Return 1

EndFunc   ;==>_RFLTA_ListToMask

; #INTERNAL_USE_ONLY#============================================================================================================
; Name...........: _RFLTA_AddToList
; Description ...: Add element to [?] or [?][2] list which is resized if necessary
; Syntax ........: _RFLTA_AddToList(ByRef $asList, $vValue_0, [$vValue_1])
; Parameters ....: $aList - List to be added to
;                  $vValue_0 - Value to add (to [0] element in [?][2] array if $vValue_1 exists)
;                  $vValue_1 - Value to add to [1] element in [?][2] array (optional)
; Return values .: None - array modified ByRef
; Author ........: Melba23
; Remarks .......: This function is used internally by _RecFileListToArray
; ===============================================================================================================================
Func _RFLTA_AddToList(ByRef $aList, $vValue_0, $vValue_1 = -1)

    If $vValue_1 = -1 Then ; [?] array
        ; Increase list count
        $aList[0] += 1
        ; Double list size if too small (fewer ReDim needed)
        If UBound($aList) <= $aList[0] Then ReDim $aList[UBound($aList) * 2]
        ; Add value
        $aList[$aList[0]] = $vValue_0
    Else ; [?][2] array
        $aList[0][0] += 1
        If UBound($aList) <= $aList[0][0] Then ReDim $aList[UBound($aList) * 2][2]
        $aList[$aList[0][0]][0] = $vValue_0
        $aList[$aList[0][0]][1] = $vValue_1
    EndIf

EndFunc   ;==>_RFLTA_AddToList

; #INTERNAL_USE_ONLY#============================================================================================================
; Name...........: _RFLTA_AddFileLists
; Description ...: Add internal lists after resizing and optional sorting
; Syntax ........: _RFLTA_AddFileLists(ByRef $asTarget, $asSource_1, $asSource_2[, $iSort = 0])
; Parameters ....: $asReturnList - Base list
;                  $asRootFileMatchList - First list to add
;                  $asFileMatchList - Second list to add
;                  $iSort - (Optional) Whether to sort lists before adding
;                  |$iSort = 0 (Default) No sort
;                  |$iSort = 1 Sort in descending alphabetical order
; Return values .: None - array modified ByRef
; Author ........: Melba23
; Remarks .......: This function is used internally by _RecFileListToArray
; ===============================================================================================================================
Func _RFLTA_AddFileLists(ByRef $asTarget, $asSource_1, $asSource_2, $iSort = 0)

    ; Correctly size root file match array
    ReDim $asSource_1[$asSource_1[0] + 1]
    ; Simple sort root file match array if required
    If $iSort = 1 Then _RFLTA_ArraySort($asSource_1, 1, $asSource_1[0])
    ; Copy root file match array
    $asTarget = $asSource_1
    ; Add file match count
    $asTarget[0] += $asSource_2[0]
    ; Correctly size file match array
    ReDim $asSource_2[$asSource_2[0] + 1]
    ; Simple sort file match array if required
    If $iSort = 1 Then _RFLTA_ArraySort($asSource_2, 1, $asSource_2[0])
    ; Add file match array
    _RFLTA_ArrayConcatenate($asTarget, $asSource_2)

EndFunc   ;==>_RFLTA_AddFileLists

; #INTERNAL_USE_ONLY#============================================================================================================
; Name...........: _RFLTA_ArraySort
; Description ...: Wrapper for QuickSort function
; Syntax ........: _RFLTA_ArraySort(ByRef $avArray)
; Parameters ....: $avArray - Array to sort
;                  $iStart  - Index to start sort
;                  $iEnd    - Index to end sort
; Return values .: None - array modified ByRef
; Author ........: wraithdu
; Modified.......: Melba23
; Remarks .......: This function is used internally by _RecFileListToArray
; ===============================================================================================================================
Func _RFLTA_ArraySort(ByRef $aArray, $iPivot_Left, $iPivot_Right, $fLeftMost = True)

    If $iPivot_Left > $iPivot_Right Then Return
    Local $iLength = $iPivot_Right - $iPivot_Left + 1
    Local $i, $j, $k, $ai, $ak, $a1, $a2, $last
    If $iLength < 45 Then ; Use insertion sort for small arrays - value chosen empirically
        If $fLeftMost Then
            $i = $iPivot_Left
            While $i < $iPivot_Right
                $j = $i
                $ai = $aArray[$i + 1]
                While $ai < $aArray[$j]
                    $aArray[$j + 1] = $aArray[$j]
                    $j -= 1
                    If $j + 1 = $iPivot_Left Then ExitLoop
                WEnd
                $aArray[$j + 1] = $ai
                $i += 1
            WEnd
        Else
            While 1
                If $iPivot_Left >= $iPivot_Right Then Return 1
                $iPivot_Left += 1
                If $aArray[$iPivot_Left] < $aArray[$iPivot_Left - 1] Then ExitLoop
            WEnd
            While 1
                $k = $iPivot_Left
                $iPivot_Left += 1
                If $iPivot_Left > $iPivot_Right Then ExitLoop
                $a1 = $aArray[$k]
                $a2 = $aArray[$iPivot_Left]
                If $a1 < $a2 Then
                    $a2 = $a1
                    $a1 = $aArray[$iPivot_Left]
                EndIf
                $k -= 1
                While $a1 < $aArray[$k]
                    $aArray[$k + 2] = $aArray[$k]
                    $k -= 1
                WEnd
                $aArray[$k + 2] = $a1
                While $a2 < $aArray[$k]
                    $aArray[$k + 1] = $aArray[$k]
                    $k -= 1
                WEnd
                $aArray[$k + 1] = $a2
                $iPivot_Left += 1
            WEnd
            $last = $aArray[$iPivot_Right]
            $iPivot_Right -= 1
            While $last < $aArray[$iPivot_Right]
                $aArray[$iPivot_Right + 1] = $aArray[$iPivot_Right]
                $iPivot_Right -= 1
            WEnd
            $aArray[$iPivot_Right + 1] = $last
        EndIf
        Return 1
    EndIf
    Local $iSeventh = BitShift($iLength, 3) + BitShift($iLength, 6) + 1
    Local $e1, $e2, $e3, $e4, $e5, $t
    $e3 = Ceiling(($iPivot_Left + $iPivot_Right) / 2)
    $e2 = $e3 - $iSeventh
    $e1 = $e2 - $iSeventh
    $e4 = $e3 + $iSeventh
    $e5 = $e4 + $iSeventh
    If $aArray[$e2] < $aArray[$e1] Then
        $t = $aArray[$e2]
        $aArray[$e2] = $aArray[$e1]
        $aArray[$e1] = $t
    EndIf
    If $aArray[$e3] < $aArray[$e2] Then
        $t = $aArray[$e3]
        $aArray[$e3] = $aArray[$e2]
        $aArray[$e2] = $t
        If $t < $aArray[$e1] Then
            $aArray[$e2] = $aArray[$e1]
            $aArray[$e1] = $t
        EndIf
    EndIf
    If $aArray[$e4] < $aArray[$e3] Then
        $t = $aArray[$e4]
        $aArray[$e4] = $aArray[$e3]
        $aArray[$e3] = $t
        If $t < $aArray[$e2] Then
            $aArray[$e3] = $aArray[$e2]
            $aArray[$e2] = $t
            If $t < $aArray[$e1] Then
                $aArray[$e2] = $aArray[$e1]
                $aArray[$e1] = $t
            EndIf
        EndIf
    EndIf
    If $aArray[$e5] < $aArray[$e4] Then
        $t = $aArray[$e5]
        $aArray[$e5] = $aArray[$e4]
        $aArray[$e4] = $t
        If $t < $aArray[$e3] Then
            $aArray[$e4] = $aArray[$e3]
            $aArray[$e3] = $t
            If $t < $aArray[$e2] Then
                $aArray[$e3] = $aArray[$e2]
                $aArray[$e2] = $t
                If $t < $aArray[$e1] Then
                    $aArray[$e2] = $aArray[$e1]
                    $aArray[$e1] = $t
                EndIf
            EndIf
        EndIf
    EndIf
    Local $iLess = $iPivot_Left
    Local $iGreater = $iPivot_Right
    If (($aArray[$e1] <> $aArray[$e2]) And ($aArray[$e2] <> $aArray[$e3]) And ($aArray[$e3] <> $aArray[$e4]) And ($aArray[$e4] <> $aArray[$e5])) Then
        Local $iPivot_1 = $aArray[$e2]
        Local $iPivot_2 = $aArray[$e4]
        $aArray[$e2] = $aArray[$iPivot_Left]
        $aArray[$e4] = $aArray[$iPivot_Right]
        Do
            $iLess += 1
        Until $aArray[$iLess] >= $iPivot_1
        Do
            $iGreater -= 1
        Until $aArray[$iGreater] <= $iPivot_2
        $k = $iLess
        While $k <= $iGreater
            $ak = $aArray[$k]
            If $ak < $iPivot_1 Then
                $aArray[$k] = $aArray[$iLess]
                $aArray[$iLess] = $ak
                $iLess += 1
            ElseIf $ak > $iPivot_2 Then
                While $aArray[$iGreater] > $iPivot_2
                    $iGreater -= 1
                    If $iGreater + 1 = $k Then ExitLoop 2
                WEnd
                If $aArray[$iGreater] < $iPivot_1 Then
                    $aArray[$k] = $aArray[$iLess]
                    $aArray[$iLess] = $aArray[$iGreater]
                    $iLess += 1
                Else
                    $aArray[$k] = $aArray[$iGreater]
                EndIf
                $aArray[$iGreater] = $ak
                $iGreater -= 1
            EndIf
            $k += 1
        WEnd
        $aArray[$iPivot_Left] = $aArray[$iLess - 1]
        $aArray[$iLess - 1] = $iPivot_1
        $aArray[$iPivot_Right] = $aArray[$iGreater + 1]
        $aArray[$iGreater + 1] = $iPivot_2
        _RFLTA_ArraySort($aArray, $iPivot_Left, $iLess - 2, True)
        _RFLTA_ArraySort($aArray, $iGreater + 2, $iPivot_Right, False)
        If ($iLess < $e1) And ($e5 < $iGreater) Then
            While $aArray[$iLess] = $iPivot_1
                $iLess += 1
            WEnd
            While $aArray[$iGreater] = $iPivot_2
                $iGreater -= 1
            WEnd
            $k = $iLess
            While $k <= $iGreater
                $ak = $aArray[$k]
                If $ak = $iPivot_1 Then
                    $aArray[$k] = $aArray[$iLess]
                    $aArray[$iLess] = $ak
                    $iLess += 1
                ElseIf $ak = $iPivot_2 Then
                    While $aArray[$iGreater] = $iPivot_2
                        $iGreater -= 1
                        If $iGreater + 1 = $k Then ExitLoop 2
                    WEnd
                    If $aArray[$iGreater] = $iPivot_1 Then
                        $aArray[$k] = $aArray[$iLess]
                        $aArray[$iLess] = $iPivot_1
                        $iLess += 1
                    Else
                        $aArray[$k] = $aArray[$iGreater]
                    EndIf
                    $aArray[$iGreater] = $ak
                    $iGreater -= 1
                EndIf
                $k += 1
            WEnd
        EndIf
        _RFLTA_ArraySort($aArray, $iLess, $iGreater, False)
    Else
        Local $iPivot = $aArray[$e3]
        $k = $iLess
        While $k <= $iGreater
            If $aArray[$k] = $iPivot Then
                $k += 1
                ContinueLoop
            EndIf
            $ak = $aArray[$k]
            If $ak < $iPivot Then
                $aArray[$k] = $aArray[$iLess]
                $aArray[$iLess] = $ak
                $iLess += 1
            Else
                While $aArray[$iGreater] > $iPivot
                    $iGreater -= 1
                WEnd
                If $aArray[$iGreater] < $iPivot Then
                    $aArray[$k] = $aArray[$iLess]
                    $aArray[$iLess] = $aArray[$iGreater]
                    $iLess += 1
                Else
                    $aArray[$k] = $iPivot
                EndIf
                $aArray[$iGreater] = $ak
                $iGreater -= 1
            EndIf
            $k += 1
        WEnd
        _RFLTA_ArraySort($aArray, $iPivot_Left, $iLess - 1, True)
        _RFLTA_ArraySort($aArray, $iGreater + 1, $iPivot_Right, False)
    EndIf

EndFunc   ;==>_RFLTA_ArraySort

; #INTERNAL_USE_ONLY#============================================================================================================
; Name...........: _RFLTA_ArrayConcatenate
; Description ...: Joins 2 arrays
; Syntax ........: _RFLTA_ArrayConcatenate(ByRef $avArrayTarget, Const ByRef $avArraySource)
; Parameters ....: $avArrayTarget - Base array
;                  $avArraySource - Array to add from element 1 onwards
; Return values .: None - array modified ByRef
; Author ........: Ultima
; Modified.......: Melba23
; Remarks .......: This function is used internally by _RecFileListToArray
; ===============================================================================================================================
Func _RFLTA_ArrayConcatenate(ByRef $avArrayTarget, Const ByRef $avArraySource)

    Local $iUBoundTarget = UBound($avArrayTarget) - 1, $iUBoundSource = UBound($avArraySource)
    ReDim $avArrayTarget[$iUBoundTarget + $iUBoundSource]
    For $i = 1 To $iUBoundSource - 1
        $avArrayTarget[$iUBoundTarget + $i] = $avArraySource[$i]
    Next

EndFunc   ;==>_RFLTA_ArrayConcatenate

And here is a modified example from the Wiki tutorial to show it working:

#include <GUIConstantsEx.au3>
#include <WindowsConstants.au3>

; Declare a flag before the function is included
Global $RFLTA_Interrupt = 0
; Now include the function
#include "RFLTA_Interrupt.au3"

; Set a HotKey
HotKeySet("x", "_Interrupt")

$hGUI = GUICreate("Test", 500, 500)

$cButton_Run = GUICtrlCreateButton("Run RFLTA on C:\", 10, 10, 120, 30)
$cButton_Int = GUICtrlCreateButton("Interrupt RFLTA", 10, 50, 120, 30)

; Create a dummy control for the Accelerator to action when pressed
$cAccelInterupt = GUICtrlCreateDummy()
; Set an Accelerator key to action the dummy control
Dim $AccelKeys[1][2] = [["z", $cAccelInterupt]]
GUISetAccelerators($AccelKeys)

GUISetState()

; Intercept Windows command messages with out own handler
GUIRegisterMsg($WM_COMMAND, "_WM_COMMAND")

While 1
    Switch GUIGetMsg()
        Case $GUI_EVENT_CLOSE
            Exit
        Case $cButton_Run
            ConsoleWrite("RFLTA running" & @CRLF)
            _RecFileListToArray_Int("C:\", "*.*", 1, 1)
            If @error = 10 Then ConsoleWrite("Interrupted" & @CRLF)
            $RFLTA_Interrupt = 0
    EndSwitch
WEnd

Func _Interrupt()
    ; The HotKey was pressed so set the flag
    $RFLTA_Interrupt = 2
EndFunc   ;==>_Interrupt

Func _WM_COMMAND($hWnd, $Msg, $wParam, $lParam)
    ; The Func 2 button was pressed so set the flag
    If BitAND($wParam, 0x0000FFFF) = $cButton_Int Then $RFLTA_Interrupt = 1
    ; The dummy control was actioned by the Accelerator key so set the flag
    If BitAND($wParam, 0x0000FFFF) = $cAccelInterupt Then $RFLTA_Interrupt = 3
    Return $GUI_RUNDEFMSG
EndFunc   ;==>_WM_COMMAND

That should allow you to abort a search which goes on too long.

M23

MyEarth · February 10, 2014

Thanks Melba, i'll incorporate into mine script and let you know.

A side-question, in my script i have already register WM_NOTIFY, can i register also WM_COMMAND without any issue?

Is correct that both return $GUI_RUNDEFMSG?

Edited February 10, 2014 by MyEarth

Melba23 · February 10, 2014

MyEarth,

You can register different messages without any problem at all. The difficulty comes if you try and register the same message twice as only the second function is called. It would be a good thing if AutoIt allowed multiple registrations - I am working on it.

As to the return value - normally you should return $GUI_RUNDEFMSG so that AutoIt continues to process the message as normal. Only if you want AutoIt to ignore the message should you do something else.

M23

MyEarth · February 10, 2014

Thanks Melba, you have make a little mistake in the example, the correct line is:

If @error = 1 And @extended = 10 Then ConsoleWrite("Interrupted" & @CRLF)

You have make If @error = 10 Then

Another doubt is about the $RFLTA_Interrupt, it's not declared in the UDF ( WARNING: possibly used before declaration - undeclared global variable ) but is declared like global only at the top of the example. This choice is intentional?

Edited February 10, 2014 by MyEarth

Melba23 · February 10, 2014

MyEarth,

Well spotted! :thumbsup:

As to the interrupt flag - I just cobbled together a quick proof-of-concept example, not a full-blown UDF. I am sure you can work out how to best declare the interrupt flag yourself.

M23

MyEarth · February 10, 2014

I can't make to work everithing on a single button, probabily i have make some mistake somewere but didn't know where

#include <GUIConstantsEx.au3>
#include <WindowsConstants.au3>
#include "RFLTA_Interrupt.au3"

;~ Global $RFLTA_Interrupt = 0 Declared in RFLTA_Interrupt.au3

$hGUI = GUICreate("Test", 500, 500)

$cButton = GUICtrlCreateButton("START", 10, 10, 120, 30)
GUISetState()

; Intercept Windows command messages with out own handler
GUIRegisterMsg($WM_COMMAND, "_WM_COMMAND")

While 1
    Switch GUIGetMsg()
        Case $GUI_EVENT_CLOSE
            Exit
        Case $cButton
            Switch GUICtrlRead($cButton)
                Case "START"
                    GUICtrlSetData($cButton, "STOP")
                    _RFLTA_START()
                    GUICtrlSetData($cButton, "START")
                Case "STOP"
                    GUICtrlSetData($cButton, "START")
            EndSwitch
    EndSwitch
WEnd

Func _RFLTA_START()
    $RFLTA_Interrupt = 0
    ConsoleWrite("STARTING_RFLTA" & @CRLF)

    _RecFileListToArray_Int("C:\", "*.*", 0, 1)
    If @error = 1 And @extended = 10 Then _R
        FLTA_STOP()
        Return
    EndIf
        ConsoleWrite("FINISHED_RFLTA" & @CRLF)
EndFunc

Func _RFLTA_STOP()
    ConsoleWrite("FUNCTION STOPPED" & @CRLF)
EndFunc

Func _WM_COMMAND($hWnd, $Msg, $wParam, $lParam)
    If BitAND($wParam, 0x0000FFFF) = $cButton Then
        If GUICtrlRead($cButton) = "STOP" Then
            $RFLTA_Interrupt = 1
        EndIf
    EndIf
    Return $GUI_RUNDEFMSG
EndFunc   ;==>_WM_COMMAND

Edited February 10, 2014 by MyEarth

Melba23 · February 10, 2014

MyEarth,

One line too many in that script - try this version:

#include <GUIConstantsEx.au3>
#include <WindowsConstants.au3>
#include "RFLTA_Interrupt.au3"

;~ Global $RFLTA_Interrupt = 0 Declared in RFLTA_Interrupt.au3

$hGUI = GUICreate("Test", 500, 500)

$cButton = GUICtrlCreateButton("START", 10, 10, 120, 30)
GUISetState()

; Intercept Windows command messages with out own handler
GUIRegisterMsg($WM_COMMAND, "_WM_COMMAND")

While 1
    Switch GUIGetMsg()
        Case $GUI_EVENT_CLOSE
            Exit
        Case $cButton
            Switch GUICtrlRead($cButton)
                Case "START"
                    GUICtrlSetData($cButton, "STOP")
                    _RFLTA_START()
                    ;GUICtrlSetData($cButton, "START") ; This was the problem <<<<<<<<<<<<  
                Case "STOP"
                    GUICtrlSetData($cButton, "START")
            EndSwitch
    EndSwitch
WEnd

Func _RFLTA_START()
    $RFLTA_Interrupt = 0
    ConsoleWrite("STARTING_RFLTA" & @CRLF)
    _RecFileListToArray_Int("C:\", "*.*", 0, 1)
    If @error = 1 And @extended = 10 Then
        _RFLTA_STOP()
        Return
    EndIf
    ConsoleWrite("FINISHED_RFLTA" & @CRLF)
EndFunc   ;==>_RFLTA_START

Func _RFLTA_STOP()
    ConsoleWrite("FUNCTION STOPPED" & @CRLF)
EndFunc   ;==>_RFLTA_STOP

Func _WM_COMMAND($hWnd, $Msg, $wParam, $lParam)
    If BitAND($wParam, 0x0000FFFF) = $cButton Then
        If GUICtrlRead($cButton) = "STOP" Then
            $RFLTA_Interrupt = 1
        EndIf
    EndIf
    Return $GUI_RUNDEFMSG
EndFunc   ;==>_WM_COMMAND

That works for me.

M23

MyEarth · February 10, 2014

Yes but the "STOP" doesn't reneame to "START" if you wait the function complete the process

That's why i have added that line, solution?

Edited February 10, 2014 by MyEarth

Melba23 · February 10, 2014

MyEarth,

solution?

Just add a line after the function has successfully completed to reset the button text:

Func _RFLTA_START()
    $RFLTA_Interrupt = 0
    ConsoleWrite("STARTING_RFLTA" & @CRLF)
    _RecFileListToArray_Int("M:\", "*.*", 0, 1)
    If @error = 1 And @extended = 10 Then
        _RFLTA_STOP()
        Return
    EndIf
    ConsoleWrite("FINISHED_RFLTA" & @CRLF)
    GUICtrlSetData($cButton, "START") ; <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
EndFunc   ;==>_RFLTA_START

M23

MyEarth · February 10, 2014

Case closed, deserves a statue for the commitment and patience

Melba23 · February 10, 2014

MyEarth,

Thank you. I am glad we got it sorted for you.

M23

marcelitoescort · April 28, 2014

Hi, i'm using this example and i've modified the "consolewrite" to a "label" in the gui to inform the current directory.

This works perfect, but if a need to make an operation on each file, where can i take control to each file name to do this?

I hope you understand my question because my english is not good.

Thanks a lot in advance.

EDIT:

Sorry, i think i found a solution just after send the original post.

See the "<<<<<<HERE" in the code

Is this right?

; Search folder - use code matched to required listing
        While 1
            ; Use DLL code
            If $iHide_HS Or $iHide_Link Then
                ; Use DLL code
                $aDLL_Ret = DllCall($hDLL, 'int', 'FindNextFileW', 'ptr', $hSearch, 'ptr', $pFile_Data)
                ; Check for end of folder
                If @error Or Not $aDLL_Ret[0] Then
                    ExitLoop
                EndIf

                ; Extract data
                $sName = DllStructGetData($tFile_Data, "FileName")
                ; Check for .. return - only returned by the DllCall
                If $sName = ".." Then
                    ContinueLoop
                EndIf
                $iAttribs = DllStructGetData($tFile_Data, "FileAttributes")
                ; Check for hidden/system attributes and skip if found
                If $iHide_HS And BitAND($iAttribs, $iHide_HS) Then
                    ContinueLoop
                EndIf
                ; Check for link attribute and skip if found
                If $iHide_Link And BitAND($iAttribs, $iHide_Link) Then
                    ContinueLoop
                EndIf
                ; Set subfolder flag
                $fFolder = 0
                If BitAND($iAttribs, 16) Then
                    $fFolder = 1
                EndIf
            Else
                ; Use native code
                $sName = FileFindNextFile($hSearch)
                ; Check for end of folder
                If @error Then
                    ExitLoop
                EndIf
                ; Set subfolder flag - @extended set in 3.3.1.1 +
                $fFolder = @extended
            EndIf

            ; If folder then check whether to add to search list
            If $fFolder Then
                Select
                    Case $iRecur < 0 ; Check recur depth
                        StringReplace($sCurrentPath, "\", "", 0, 2)
                        If @extended < $iMaxLevel Then
                            ContinueCase ; Check if matched to masks
                        EndIf
                    Case $iRecur = 1 ; Full recur
                        If Not StringRegExp($sName, $sExclude_Folder_Mask) Then ; Add folder unless excluded
                            _RFLTA_AddToList($asFolderSearchList, $sCurrentPath & $sName & "\")
                        EndIf
                        ; Case $iRecur = 0 ; Never add
                        ; Do nothing
                EndSelect
            EndIf

            If $iSort Then ; Save in relevant folders for later sorting

                If $fFolder Then
                    If StringRegExp($sName, $sInclude_Folder_Mask) And Not StringRegExp($sName, $sExclude_Folder_Mask) Then
                        _RFLTA_AddToList($asFolderMatchList, $sRetPath & $sName & $sFolderSlash)
                    EndIf
                Else
                    If StringRegExp($sName, $sInclude_File_Mask) And Not StringRegExp($sName, $sExclude_File_Mask) Then
                        ; Select required list for files
                        If $sCurrentPath = $sInitialPath Then
                            _RFLTA_AddToList($asRootFileMatchList, $sRetPath & $sName)
                        Else
                            _RFLTA_AddToList($asFileMatchList, $sRetPath & $sName)
                        EndIf
                    EndIf
                EndIf

            Else ; Save directly in return list
                If $fFolder Then
                    If $iReturn <> 1 And StringRegExp($sName, $sInclude_Folder_Mask) And Not StringRegExp($sName, $sExclude_Folder_Mask) Then
                        _RFLTA_AddToList($asReturnList, $sRetPath & $sName & $sFolderSlash)
                    EndIf
                Else
                    If $iReturn <> 2 And StringRegExp($sName, $sInclude_File_Mask) And Not StringRegExp($sName, $sExclude_File_Mask) Then
                        _RFLTA_AddToList($asReturnList, $sRetPath & $sName)
                    EndIf
                EndIf
            EndIf
            GUICtrlSetData($Label1,$sName) <<<<<<<<<< HERE is the file name
        WEnd

Edited April 28, 2014 by marcelitoescort

Stop a search using RecFileListToArray

Recommended Posts

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Create an account or sign in to comment

Create an account

Sign in

Recently Browsing 0 members