Jump to content

IRC UDF - Updated Version of Chips' IRC UDF - Release: V1.22 - 09/06/2016 - Technical Writer Needed!


Recommended Posts

Hey guys,

Thought I would share this, it's an example on how to use IRC and this UDF to connect to a twitch channel's chat and send a message using a hotkey :)

Thank you @rcmaehl for sharing :)

#include <IRC.au3>
#include <Misc.au3>

; Allow some TCP lag
Opt("TCPTimeout", 500)

#include <ButtonConstants.au3>
#include <EditConstants.au3>
#include <GUIConstantsEx.au3>
#include <StaticConstants.au3>
#include <WindowsConstants.au3>
#include <ColorConstants.au3>
#Region ### START Koda GUI section ### Form=
$Form1 = GUICreate("Twitch chat hotkey", 381, 436, 192, 124)
GUISetFont(10, 400, 0, "MS Sans Serif")
$Label1 = GUICtrlCreateLabel("Twitch chat hotkey", 128, 8, 153, 24)
GUICtrlSetFont(-1, 12, 800, 0, "MS Sans Serif")
$Label2 = GUICtrlCreateLabel("Twitch username:", 16, 88, 144, 24)
GUICtrlSetFont(-1, 12, 800, 0, "MS Sans Serif")
$Input1 = GUICtrlCreateInput("", 176, 88, 185, 24)
$Label3 = GUICtrlCreateLabel("OAuth password:", 16, 128, 141, 24)
GUICtrlSetFont(-1, 12, 800, 0, "MS Sans Serif")
$Input2 = GUICtrlCreateInput("oauth:", 176, 128, 185, 24)
$Button1 = GUICtrlCreateButton("Get OAuth password", 88, 176, 201, 41)
GUICtrlSetFont(-1, 10, 800, 0, "MS Sans Serif")
$Label4 = GUICtrlCreateLabel("Twitch channel:", 16, 240, 128, 24)
GUICtrlSetFont(-1, 12, 800, 0, "MS Sans Serif")
$Input3 = GUICtrlCreateInput("kolento", 160, 240, 201, 24)
$Label5 = GUICtrlCreateLabel("Message:", 16, 288, 81, 24)
GUICtrlSetFont(-1, 12, 800, 0, "MS Sans Serif")
$Input4 = GUICtrlCreateInput("Kappa hello guys Kappa", 112, 288, 249, 24)
$Button2 = GUICtrlCreateButton("Connect", 104, 376, 193, 41)
GUICtrlSetFont(-1, 10, 800, 0, "MS Sans Serif")
$Label6 = GUICtrlCreateLabel("Status: disconnected", 136, 336, 128, 20)
GUICtrlSetColor(-1, 0xFF0000)
$Label7 = GUICtrlCreateLabel("Press F10 once connected to send the message", 56, 48, 291, 20)
GUISetState(@SW_SHOW)
#EndRegion ### END Koda GUI section ###

;restore previous values if the software has already been used

if RegRead("HKCU\Software\TwitchChatHotkey", "username") <> "" Then

    GUICtrlSetData($Input1, RegRead("HKCU\Software\TwitchChatHotkey", "username"))
    GUICtrlSetData($Input2, RegRead("HKCU\Software\TwitchChatHotkey", "password"))
    GUICtrlSetData($Input3, RegRead("HKCU\Software\TwitchChatHotkey", "channel"))
    GUICtrlSetData($Input4, RegRead("HKCU\Software\TwitchChatHotkey", "message"))

EndIf

While 1
    $nMsg = GUIGetMsg()
    Switch $nMsg
        Case $GUI_EVENT_CLOSE
            Exit
        Case $Button1
            ShellExecute("http://twitchapps.com/tmi/")
        Case $Button2
            GUICtrlSetState($Button2, $GUI_DISABLE)
            connect()
    EndSwitch
WEnd

Func connect()

    GUICtrlSetData($Label6, "Status: connecting...")
    GUICtrlSetColor($Label6, $COLOR_BLUE)

    $username = GUICtrlRead($Input1)
    $password = GUICtrlRead($Input2)
    $channel = StringLower(GUICtrlRead($Input3))
    $message = GUICtrlRead($Input4)

    ;backup info for future usage

    Regwrite("HKCU\Software\TwitchChatHotkey", "username", "REG_SZ", $username)
    Regwrite("HKCU\Software\TwitchChatHotkey", "password", "REG_SZ", $password)
    Regwrite("HKCU\Software\TwitchChatHotkey", "channel", "REG_SZ", $channel)
    Regwrite("HKCU\Software\TwitchChatHotkey", "message", "REG_SZ", $message)

    ;Start Up Networking
    TCPStartup()

    ; Connect to IRC. Send Password, if any. Declare User Identity.
    Local $Sock = _IRCConnect("irc.chat.twitch.tv", 6667, $username, 0, $username, $password)

    ; Prepare to Receive Data
    Local $sRecv = ""

    ; Start Loop
    While 1

        ; Receive Data
        $sRecv = _IRCGetMsg($Sock)
        ConsoleWrite($sRecv)

        ; Split Data into Commands and Parameters for Processing
        Local $sTemp = StringSplit($sRecv, " ")

        ; If Not Usable, then Skip this Data
        If $sTemp[0] <= 2 Then ContinueLoop

        ; Decide What To Do Based on Received Data
        Switch $sTemp[2]

            ; On Server Welcome
            Case $RPL_WELCOME

                ; Join channel
                _IRCChannelJoin($Sock, "#" & $channel)

                GUICtrlSetData($Label6, "Status: connected")
                GUICtrlSetColor($Label6, $COLOR_GREEN)

                While 1

                    If _IsPressed(79) Then

                        $message = GUICtrlRead($Input4)

                        _IRCRaw($Sock, "PRIVMSG #" & $channel & " :" & $message)

                        while _IsPressed(79)

                            ;do nothing when the key is kept pressed to avoid chat flood, so the message is only sent once

                        WEnd

                    endif

                    $nMsg = GUIGetMsg()

                    If $nMsg = $GUI_EVENT_CLOSE Then

                        ; Disconnect
                        _IRCDisconnect($Sock)

                        ; Shutdown Networking
                        TCPShutdown()

                        Exit

                    EndIf

                WEnd

        EndSwitch

    WEnd

EndFunc   ;==>connect

You can find a compiled version here:  Twitch chat message hotkey.exe

Edited by Neutro
Link to post
Share on other sites
  • 1 month later...
  • Replies 84
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Popular Posts

A UDF to connect to IRC using TCP Functions, as well as perform actions once connected. WANTED: Technical Writer able to create / maintain a helpfile (.chm) using the Autoit helpfile layout for a

UDFs shouldn't use MsgBox() to report errors, this is down to the developer to decide. You have quite a bit of work to do before calling this a UDF.

Hey rcmaehl, very nice IRC udf you made i have request / question regarding it: is there a plan to implement SSL? Or could some1 with enough knowledge help me in adressing the SSL DLLs directly to

Hi,

I found a bug in _IRCMultiSendMsg() function.

Between #475 and #481 lines of the IRC.au3 file there is code that not allow continue to case else of select statment, thus the function cannot work never. 

The select statment contains two expressions that are mutually exclusive, then either is always true, then never execute case else branch, then TCPSend() never execute which is the heart of _IRCMultiSendMsg()

Case $_sTarget = ""
            $_sReturn = SetError(2, 1, 0)
        Case Not $_sTarget = ""
            Switch AscW(StringLeft($_sTarget, 1))
                Case 0 To 32, 34, 36, 37, 39 To 42, 44 To 47, 58 To 64, 91 To 96, 123 To 1114111 ; AKA Not 33,35,38,43,48 To 57,65 To 90,97 To 122
                    $_sReturn = SetError(2, 2, 0)
            EndSwitch

Tested with current version of Autoit (3.3.14.2) and current version of IRC UDF (September 6, 2016)

Please, fixit

Link to post
Share on other sites
  • 2 weeks later...
  • 2 months later...

Holy Moly he's right... just not for the reason specified. The example file returns 4-2 due to a poor implementation of IsBinary

Working on a fix now

Edited by rcmaehl

My UDFs are generally for me. If they aren't updated for a while, it means I'm not using them myself. As soon as I start using them again, they'll get updated.

My Projects

WhyNotWin11
Cisco FinesseGithubIRC UDFWindowEx UDF

 

Link to post
Share on other sites

Latest Update:

.
  GUI.au3            Added   : Listview for connected Servers
  _IRCChannelInvite  Updated : Better channel error checking
  _IRCChannelJoin    Updated : Better channel error checking
  _IRCChannelKick    Added   : Ability to Kick users from Multiple Channels
  _IRCChannelPart    Updated : Better channel error checking
  _IRCChannelTopic   Updated : Better channel error checking
  _IRCMultiSendMsg   Fixed   : Flag implimentation

 

Edited by rcmaehl

My UDFs are generally for me. If they aren't updated for a while, it means I'm not using them myself. As soon as I start using them again, they'll get updated.

My Projects

WhyNotWin11
Cisco FinesseGithubIRC UDFWindowEx UDF

 

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Hermes
      Hi, I am struggling in setting the value of a textarea based on the value of clipboard (that contains a long web page source codes). If I use _WD_SetElementValue, it freezes after some time, or appears to be pressing tab and goes out of focus. I can also use send keys but i need the script to run in the background.
      Here is the full script:
      #Include "Chrome.au3" #Include "wd_core.au3" #Include "wd_helper.au3" #Include "WinHttp.au3" #include <MsgBoxConstants.au3> #include <WinAPIFiles.au3> #include <Array.au3> #include <AutoItConstants.au3> #include <WinAPIFiles.au3> #include <GDIPlus.au3> #include <Excel.au3> Local $sDesiredCapabilities, $sSession SetupChrome() _WD_Startup() $sSession = _WD_CreateSession($sDesiredCapabilities) _WD_LoadWait($sSession) _WD_Navigate($sSession, "http://demo.borland.com/testsite/stadyn_largepagewithimages.html") _WD_LoadWait($sSession) Global $sSource = _WD_GetSource($sSession) Local $Paste = ClipPut($sSource) Local $sData = ClipGet() Local $aArray = 0, _ $iOffset = 1 While 1 $aArray = StringRegExp($sData, '(?s)<p>.*</p>', $STR_REGEXPARRAYMATCH, $iOffset) If @error Then ExitLoop $iOffset = @extended For $i = 0 To UBound($aArray) - 1 Local $Paste = ClipPut($aArray[$i]) Local $sRegExData = ClipGet() ;MsgBox(0, "", "$sRegExData = " & $sRegExData) Next WEnd _WD_Navigate($sSession, "https://www.w3schools.com/tags/tryit.asp?filename=tryhtml5_textarea_placeholder") _WD_WaitElement($sSession, $_WD_LOCATOR_ByCSSSelector, "iframe#iframeResult") Local $sElement1 = _WD_FindElement($sSession, $_WD_LOCATOR_ByCSSSelector, "iframe#iframeResult") _WD_FrameEnter($sSession, $sElement1) _WD_WaitElement($sSession, $_WD_LOCATOR_ByXPath, "//html/body/textarea") $textarea = _WD_FindElement($sSession, $_WD_LOCATOR_ByXPath, "//html/body/textarea") _WD_ElementAction($sSession, $textarea, 'click') ;WD SetElementValue(SsSession, Stextarea, $sRegExData) <-- I can do this but the focus goes out, or the browser freezes _WD_FrameLeave($sSession) sleep(2000) Send("^v") _WD_LoadWait($sSession) _WD_Shutdown() Func SetupChrome() _WD_Option('Driver', 'chromedriver.exe') _WD_Option('Port', 9515) _WD_Option('DriverParams', '--log-path="' & @ScriptDir & '\chrome.log"') $sDesiredCapabilities = '{"capabilities": {"alwaysMatch": {"goog:chromeOptions": {"w3c": true, "args":["start-maximized","disable-infobars"]}}}}' EndFunc ;==>SetupChrome Can someone help me please, or re-direct me to the right path? TIA!
    • By Hermes
      Hi, I am trying to select elements in print page (dialog window) for a specific web page. But when trying to do so, it looks like it does not allow me to do it.
      So far, this is what I have:
      _WD_WaitElement($sSession, $_WD_LOCATOR_ByCSSSelector, "body") Local $mainpagebody = _WD_FindElement($sSession, $_WD_LOCATOR_ByCSSSelector, "body") _WD_HighlightElement($sSession, $mainpagebody, 2) _WD_WaitElement($sSession, $_WD_LOCATOR_ByCSSSelector, "img.print-button") Local $printbutton = _WD_FindElement($sSession, $_WD_LOCATOR_ByCSSSelector, "img.print-button") _WD_ElementAction($sSession, $printbutton, 'click') _WD_LoadWait($sSession) Sleep(3000) _WD_WaitElement($sSession, $_WD_LOCATOR_ByCSSSelector, "body") Local $printpagebody = _WD_FindElement($sSession, $_WD_LOCATOR_ByCSSSelector, "body") _WD_HighlightElement($sSession, $printpagebody, 2) The script above highlights the main web page "body" element, then clicks a tag to print a specific part of the page, then it will open a print page window where i am trying to highlight the body of that print page - but it looks like it is dropping from the session because it opens up another chrome page chrome://print.
       
      Below is the output log:
      __WD_Post: URL=HTTP://127.0.0.1:9515/session/cd08704233a965ccbaf9292e8692c3e4/element; $sData={"using":"css selector","value":"body"} __WD_Post: StatusCode=200; ResponseText={"value":{"element-6066-11e4-a52e-4f735466cecf":"91a394f0-004c-480d-aedf-52e2b30233c6"}}... _WD_FindElement: {"value":{"element-6066-11e4-a52e-4f735466cecf":"91a394f0-004c-480d-aedf-52e2b30233c6"}} _WD_WaitElement ==> Success __WD_Post: URL=HTTP://127.0.0.1:9515/session/cd08704233a965ccbaf9292e8692c3e4/element; $sData={"using":"css selector","value":"body"} __WD_Post: StatusCode=200; ResponseText={"value":{"element-6066-11e4-a52e-4f735466cecf":"91a394f0-004c-480d-aedf-52e2b30233c6"}}... _WD_FindElement: {"value":{"element-6066-11e4-a52e-4f735466cecf":"91a394f0-004c-480d-aedf-52e2b30233c6"}} __WD_Post: URL=HTTP://127.0.0.1:9515/session/cd08704233a965ccbaf9292e8692c3e4/execute/sync; $sData={"script":"arguments[0].style='background: #FFFF66; border-radius: 5px; padding-left: 3px;'; return true;", "args":[{"element-6066-11e4-a52e-4f735466cecf":"91a394f0-004c-480d-aedf-52e2b30233c6"}]} __WD_Post: StatusCode=200; ResponseText={"value":true}... _WD_ExecuteScript: {"value":true}... __WD_Post: URL=HTTP://127.0.0.1:9515/session/cd08704233a965ccbaf9292e8692c3e4/element; $sData={"using":"css selector","value":"img.print-link"} __WD_Post: StatusCode=200; ResponseText={"value":{"element-6066-11e4-a52e-4f735466cecf":"eb9e4673-4dec-4d4c-be6a-b7967743394b"}}... _WD_FindElement: {"value":{"element-6066-11e4-a52e-4f735466cecf":"eb9e4673-4dec-4d4c-be6a-b7967743394b"}} _WD_WaitElement ==> Success __WD_Post: URL=HTTP://127.0.0.1:9515/session/cd08704233a965ccbaf9292e8692c3e4/element; $sData={"using":"css selector","value":"img.print-link"} __WD_Post: StatusCode=200; ResponseText={"value":{"element-6066-11e4-a52e-4f735466cecf":"eb9e4673-4dec-4d4c-be6a-b7967743394b"}}... _WD_FindElement: {"value":{"element-6066-11e4-a52e-4f735466cecf":"eb9e4673-4dec-4d4c-be6a-b7967743394b"}} __WD_Post: URL=HTTP://127.0.0.1:9515/session/cd08704233a965ccbaf9292e8692c3e4/element/eb9e4673-4dec-4d4c-be6a-b7967743394b/click; $sData={"id":"eb9e4673-4dec-4d4c-be6a-b7967743394b"} __WD_Post: StatusCode=200; ResponseText={"value":null}... _WD_ElementAction: {"value":null}... __WD_Post: URL=HTTP://127.0.0.1:9515/session/cd08704233a965ccbaf9292e8692c3e4/execute/sync; $sData={"script":"arguments[0].style='background: #FFFF66; border-radius: 5px; padding-left: 3px;'; return true;", "args":[{"element-6066-11e4-a52e-4f735466cecf":"eb9e4673-4dec-4d4c-be6a-b7967743394b"}]} __WD_Post: StatusCode=200; ResponseText={"value":true}... _WD_ExecuteScript: {"value":true}... __WD_Post: URL=HTTP://127.0.0.1:9515/session/cd08704233a965ccbaf9292e8692c3e4/execute/sync; $sData={"script":"return document.readyState", "args":[]} __WD_Post: StatusCode=500; ResponseText={"value":{"error":"script timeout","message":"script timeout\n (Session info: chrome=92.0.4515.107)... __WD_Post ==> Webdriver Exception: {"value":{"error":"script timeout","message":"script timeout\n (Session info: chrome=92.0.4515.107)","stacktrace":"Backtrace:\n\tOrdinal0 [0x00C63733+2504499]\n\tOrdinal0 [0x00BFC401+2081793]\n\tOrdinal0 [0x00B024F0+1058032]\n\tOrdinal0 [0x00B55685+1398405]\n\tOrdinal0 [0x00B45E83+1334915]\n\tOrdinal0 [0x00B54CDB+1395931]\n\tOrdinal0 [0x00B45D4B+1334603]\n\tOrdinal0 [0x00B222B4+1188532]\n\tOrdinal0 [0x00B23149+1192265]\n\tGetHandleVerifier [0x00DDFB8C+1512252]\n\tGetHandleVerifier [0x00E8B0DF+2214031]\n\tGetHandleVerifier [0x00CE4BC3+484211]\n\tGetHandleVerifier [0x00CE3E69+480793]\n\tOrdinal0 [0x00C0218D+2105741]\n\tOrdinal0 [0x00C066E8+2123496]\n\tOrdinal0 [0x00C06827+2123815]\n\tOrdinal0 [0x00C0FB73+2161523]\n\tBaseThreadInitThunk [0x75EB62C4+36]\n\tRtlSubscribeWnfStateChangeNotification [0x77C11B69+1081]\n\tRtlSubscribeWnfStateChangeNotification [0x77C11B34+1028]\n"}} _WD_ExecuteScript: {"value":{"error":"script timeout","message":"script timeout\n (Session info: chrome=92.0.4515.107)... _WD_ExecuteScript ==> Webdriver Exception: HTTP status = 500 _WD_LoadWait ==> Webdriver Exception __WD_Post: URL=HTTP://127.0.0.1:9515/session/cd08704233a965ccbaf9292e8692c3e4/element; $sData={"using":"css selector","value":"body"} __WD_Post: StatusCode=200; ResponseText={"value":{"element-6066-11e4-a52e-4f735466cecf":"91a394f0-004c-480d-aedf-52e2b30233c6"}}... _WD_FindElement: {"value":{"element-6066-11e4-a52e-4f735466cecf":"91a394f0-004c-480d-aedf-52e2b30233c6"}} _WD_WaitElement ==> Success __WD_Post: URL=HTTP://127.0.0.1:9515/session/cd08704233a965ccbaf9292e8692c3e4/element; $sData={"using":"css selector","value":"body"} __WD_Post: StatusCode=200; ResponseText={"value":{"element-6066-11e4-a52e-4f735466cecf":"91a394f0-004c-480d-aedf-52e2b30233c6"}}... _WD_FindElement: {"value":{"element-6066-11e4-a52e-4f735466cecf":"91a394f0-004c-480d-aedf-52e2b30233c6"}} __WD_Post: URL=HTTP://127.0.0.1:9515/session/cd08704233a965ccbaf9292e8692c3e4/execute/sync; $sData={"script":"arguments[0].style='background: #FFFF66; border-radius: 5px; padding-left: 3px;'; return true;", "args":[{"element-6066-11e4-a52e-4f735466cecf":"91a394f0-004c-480d-aedf-52e2b30233c6"}]} __WD_Post: StatusCode=200; ResponseText={"value":true}... _WD_ExecuteScript: {"value":true}...  
      Is it even possible to select elements in print page?

    • By walec
      Hello
      How can I export a sheet to pdf using the OOoCalc.au3 UDF?
      Thank you for any hints or possibly other solutions / functions.
    • By p4sCh
      Hello everyone,
      I've created a UDF for basic communication with SSH servers. I know there is already such a UDF, but I wasn't satisfied with it for my purpose, so I created a new one.
      This UDF also acts as a wrapper for the plink executable. Its essential functions are _SSHConnect, _SSHSend, _SSHRecv and _SSHCloseSocket.
      It does support multiple simultaneous connections and aims to be pretty robust. Feel free to share your opinions
      Two of the included examples use a slightly modified version of Vintage Terminal by @Chimp
      Download
      The download includes ssh.au3 (UDF), plink.exe (necessary), vintage terminal and code examples:
      Version 1.0.1
      - fixed rare _SSHConnect bug where "ssh-host-key prompt" was not answered
      SSH UDF 1.0.1.zip
       
    • By water
      I have started to rewrite the PowerPoint UDF similar to the Word, Excel and Outlook UDF. The new UDF will not be compatible with the existing one.
      I will add examples, documentation, a section in the wiki etc.
      So far the following functions have been coded - more are on the ToDo list.
      _PPT_Open: Open a connection to a running instance of PowerPoint or start a new one _PPT_Close: Close a PowerPoint instance _PPT_CommentAdd: Add a Comment anywhere on a Slide or connected to a Shape (version 1.5.0.0 2021-08-31) _PPT_CommentDelete: Delete a single Comment from a Slide or all Comments from a SlideRange (version 1.5.0.0 2021-08-31) _PPT_CommentList: Get a list of all Comments in a Presentation (version 1.5.0.0 2021-08-31) _PPT_ConvertUnits: Convert units (like centimeters) to other units (like points) (version 1.3.0.0 2021-08-17) _PPT_HeaderFooterList: Returns a list of Headers and Footers for a Presentation (version 1.1.0.0 2021-07-25, removed with version 1.4.0.0 2021-08-25) _PPT_HeaderFooterSet: Sets the Header/Footer for a Slide/Slides or the Slide-/Notes-/Handout-/Title-Master of the Presentation (version 1.2.0.0 2021-08-09) _PPT_PresentationAttach: Attach to an already opened Presentation _PPT_PresentationClose: Close a Presentation _PPT_PresentationExport: Export one/multiple/all Slides as PDF or XPS. _PPT_PresentationExportGraphic: Export one/multiple/all Slides in a graphic format. _PPT_PresentationList: Returns a list of currently open Presentations (version 1.0.0.0 2021-07-20) _PPT_PresentationNew: Create a new Presentation _PPT_PresentationOpen: Open an existing Presentation _PPT_Print: Print one/multiple/all Slides of a Presentation (version 1.0.0.0 2021-07-20) _PPT_PresentationSave: Save a Presentation _PPT_PresentationSaveAs: Save a Presentation to another location or with another type _PPT_ShapeAdd: Add a Shape to a single or multiple Slides (version 1.1.0.0 2021-07-25) _PPT_ShapeAlignDistribute: Aligns and distributes the Shapes in the specified ShapeRange (version 1.6.0.0 - to be released) _PPT_ShapeCopyMove: Copy/move a Shape(s) of a single Slide to a Slide(s) in the same or a different Presentation (version 1.1.0.0 2021-07-25) _PPT_ShapeDelete: Delete a Shape or Shapes from a single or multiple Slides (version 1.1.0.0 2021-07-25) _PPT_SlideAdd: Add slide(s) to a Presentation _PPT_SlideCopyMove: Copy, move, duplicate Slide(s) _PPT_SlideDelete: Delete Slide(s) _PPT_SlideShow: Show a Presentation _PPT_TableGet: Extract data from a PowerPoint Table Shape to an array (version 1.3.0.0 2021-08-17) _PPT_TableSet: Write data to a PowerPoint Table Shape (version 1.3.0.0 2021-08-17) _PPT_TextFindReplace: Find & replace text throughout entire PowerPoint presentation (version 1.0.0.0 2021-07-20) _PPT_TextSet: Sets/modifies the Text of a Shape or Shapes of a single or multiple Slides (version 1.2.0.0 2021-08-09 Which functions do you want me to add to the UDF?
      ToDo list:
      create slide (JLogan3o13) - Done: _PPT_SlideAdd Apply template to slide (JLogan3o13) - Done: _PPT_SlideAdd Apply theme to slide (JLogan3o13) Cut/Copy/Duplicate/Move/Delete slide(s) (JLogan3o13) - Done: _PPT_SlideCopyMove, _PPT_SlideDelete Export slides (JLogan3o13) - Done: _PPT_PresentationExport Cut/Copy/Duplicate/Move/Delete shape(s) (JLogan3o13): Done : _PPT_ShapeCopyMove, _PPT_ShapeDelete (version 1.1.0.0 2021-07-25) ApplyAnimation, Select, SetDefaultProperties, and zOrder for shape(s) (JLogan3o13) Searching and replacing text (pcjunki) - Done: _PPT_TextFindReplace (version 1.0.0.0 2021-07-20) Export slides in a graphic format (JPG, GIF, PNG ...) (UEZ) - Done: _PPT_PresentationExportGraphic The UDF can be downloaded from the download forum.
       
×
×
  • Create New...