DISM GUI (WIP)

trashy · March 20, 2014

New Name Easy_DISM

Since I started this project a couple years ago it has turned into something I can be proud of

.Project Page

Download Page

I put this together in a couple hours but I ran ino a snag.

My first question has to be is ListView the correct Function.

My problem is the return value of the selected List View Item. List View Item 1 return value = 0

item 2 = 1 etc... As a work around I started with 0 but there is no image index 0 in a wim file.

I need Item 1 to return a value of 1, item 2 = 2 etc... I hope this makes sense.

Also ListView is just big enough to show 1 item, is it possible to auto select the Listview Item showing.

I added a couple notes, lines I'm concerned with are 25 thru 30

#include <ButtonConstants.au3>
#include <GUIConstantsEx.au3>
#include <GuiListView.au3>
#include <StaticConstants.au3>
#include <WindowsConstants.au3>

$Form1 = GUICreate("DISM GUI", 615, 438, 192, 124)
$Label1 = GUICtrlCreateLabel("Wim File", 40, 32, 56, 17)
$Label2 = GUICtrlCreateLabel("Mount Folder", 40, 96, 65, 17)
$Label3 = GUICtrlCreateLabel("Image Index", 40, 168, 60, 17)
$Label4 = GUICtrlCreateLabel("Mount", 180, 148, 56, 17)
$Label5 = GUICtrlCreateLabel("Comit", 280, 148, 56, 17)
$Label6 = GUICtrlCreateLabel("Discard", 380, 148, 56, 17)
$Label7 = GUICtrlCreateLabel("Clean Corrupt Mount Points", 20, 384, 80, 27)
$Input1 = GUICtrlCreateInput("", 40, 48, 401, 32)
$Input2 = GUICtrlCreateInput("", 40, 112, 401, 32)
$Button1 = GUICtrlCreateButton("Browse", 480, 56, 75, 25)
$Button2 = GUICtrlCreateButton("Browse", 480, 120, 75, 25)
$Button3 = GUICtrlCreateButton("Mount", 160, 168, 75, 25)
$Button4 = GUICtrlCreateButton("UnMount", 260, 168, 75, 25)
$Button5 = GUICtrlCreateButton("UnMount", 360, 168, 75, 25)
$Button6 = GUICtrlCreateButton("Clean", 100, 384, 75, 25)
$Button7 = GUICtrlCreateButton("Exit", 264, 384, 75, 25)
$listview = GUICtrlCreateListView(" ",105, 168, 50, 25, BitOR($LVS_SHOWSELALWAYS, $LVS_NOSORTHEADER, $LVS_REPORT, $LVS_SINGLESEL,$LVS_NOCOLUMNHEADER ))
_GUICtrlListView_AddItem($listview, "0") ;I need to get rid of this item
_GUICtrlListView_AddItem($listview, "1") ;how to get a return value of 1 to pass to $iIndex on line 46
_GUICtrlListView_AddItem($listview, "2") ;how to get a return value of 2 to pass to $iIndex on line 46
_GUICtrlListView_AddItem($listview, "3")
_GUICtrlListView_AddItem($listview, "4")
_GUICtrlListView_AddItem($listview, "5")
GUISetState(@SW_SHOW)

While 1
    $nMsg = GUIGetMsg()
    Switch $nMsg
        Case $GUI_EVENT_CLOSE, $Button7
            Exit
        Case $Button1
            $of_Button1 = FileOpenDialog("Select WIM File : ", @HomeDrive, "WIM Files (*.wim)", 1, "")
            GUICtrlSetData($Input1, $of_Button1)
        Case $Button2
            $of_Button2 = FileSelectFolder("Select Mount Folder", "")
            GUICtrlSetData($Input2, $of_Button2)
        Case $Button3
            $iIndex = _GUICtrlListView_GetSelectedIndices($listview)
            RunWait("Dism.exe /Mount-Wim /WimFile:" & (GUICtrlRead($Input1) & " /index:" & ($iIndex) & " /MountDir:" & (GUICtrlRead($Input2))))
        Case $Button4
            RunWait("Dism.exe /UnMount-Wim /MountDir:" & (GUICtrlRead($Input2) & " /commit"))
        Case $Button5
            RunWait("Dism.exe /UnMount-Wim /MountDir:" & (GUICtrlRead($Input2) & " /discard"))
        Case $Button6
            Run(@ComSpec & " /c Dism.exe /Cleanup-wim && Pause")
    EndSwitch
WEnd

Edited January 20, 2017 by trashy
New Name New Version

trashy · March 20, 2014

Ok let me rephrase this. I know I can't change the return value.

What I really need to do is pass the ListViewItem text to $iIndex

trashy · March 20, 2014

Solved one problem once I found the right function

$iIndex = _GUICtrlListView_GetItemTextString($listview)

Now is it possible to set focus on ListView Item showing.

antmar904 · March 21, 2014

Use gimagex

http://www.autoitscript.com/site/autoit-tools/gimagex/

trashy · March 21, 2014

I do and have for years.

Also use command line version for both dism and imagex depends on the situation.

iamtheky · March 21, 2014

maybe add more functionality for the things DISM excels at like updating images offline (/add-package /add-driver). Currently it could be entirely replaced with imagex commands.

and you could use the results of a file select and imagex /info to present only valid volume choices (or at least to build a check that will prevent execution if the choice is not valid)

trashy · March 21, 2014

I'm a total amateur with Autoit and I only started on this yesterday.

I plan to add the functions you speak of and more but had to start with the basics.

Only thing I found similar was here.http://dismgui.codeplex.com/releases/view/101865

I thought something better could be done in Autoit! Besides to someone like me it's a challenge.

I was surprised no one in the Autoit community hadn't already attempted something.

I'm trying to learn and I hope I'm beginning to understand.

I know there are many here who could do better.

If someone wants to take over, be my guest.

trashy · March 21, 2014

Here's what I got so far.

Next I want to populate an input with the wim info of the selected wim and index.

Still trying to get auto select of visible ListViewText.

#include <ButtonConstants.au3>
#include <GUIConstantsEx.au3>
#include <GuiListView.au3>
#include <StaticConstants.au3>
#include <WindowsConstants.au3>
#include <ListViewConstants.au3>

$Form1 = GUICreate("DISM GUI", 615, 438, 192, 124)
$Label1 = GUICtrlCreateLabel("Wim File", 40, 32, 56, 17)
$Label2 = GUICtrlCreateLabel("Mount Folder", 40, 96, 65, 17)
$Label3 = GUICtrlCreateLabel("Image Index", 40, 168, 60, 17)
$Label4 = GUICtrlCreateLabel("Mount", 180, 148, 56, 17)
$Label5 = GUICtrlCreateLabel("UnMount", 325, 148, 56, 17)
$Label6 = GUICtrlCreateLabel("Clean Corrupt Mount Points", 20, 384, 80, 27)
$Label7 = GUICtrlCreateLabel("Click the index number then click mount", 40, 200, 200, 17) ;gotta get rid of this
$Input1 = GUICtrlCreateInput("", 40, 48, 401, 32)
$Input2 = GUICtrlCreateInput("", 40, 112, 401, 32)
$Button1 = GUICtrlCreateButton("Browse", 480, 56, 75, 25)
$Button2 = GUICtrlCreateButton("Browse", 480, 120, 75, 25)
$Button3 = GUICtrlCreateButton("Mount", 160, 168, 75, 25)
$Button4 = GUICtrlCreateButton("Commit", 260, 168, 75, 25)
$Button5 = GUICtrlCreateButton("Discard", 360, 168, 75, 25)
$Button6 = GUICtrlCreateButton("Clean", 100, 384, 75, 25)
$Button7 = GUICtrlCreateButton("Exit", 264, 384, 75, 25)
$listview = GUICtrlCreateListView(" ",105, 168, 50, 25, BitOR($LVS_SHOWSELALWAYS, $LVS_NOSORTHEADER, $LVS_REPORT, $LVS_SINGLESEL,$LVS_NOCOLUMNHEADER ))
_GUICtrlListView_AddItem($listview, "1")
_GUICtrlListView_AddItem($listview, "2")
_GUICtrlListView_AddItem($listview, "3")
_GUICtrlListView_AddItem($listview, "4")
_GUICtrlListView_AddItem($listview, "5")
GUISetState(@SW_SHOW)

While 1
    $nMsg = GUIGetMsg()
    Switch $nMsg
        Case $GUI_EVENT_CLOSE, $Button7
            Exit
        Case $Button1
            $of_Button1 = FileOpenDialog("Select WIM File : ", @HomeDrive, "WIM Files (*.wim)", 1, "")
            GUICtrlSetData($Input1, $of_Button1)
        Case $Button2
            $of_Button2 = FileSelectFolder("Select Mount Folder", "")
            GUICtrlSetData($Input2, $of_Button2)
        Case $Button3
            $iIndex = _GUICtrlListView_GetItemTextString($listview)
            RunWait(@ComSpec & " /k Dism.exe /Get-WimInfo /WimFile:" & (GUICtrlRead($Input1) & " /index:" & ($iIndex))) ;need to pass this info to gui and get rid of cmd console
                $1 = MsgBox(262144 + 4 + 32,  "Wim Info", "You saw it ya wanna continue")
                If $1 = 6 Then
            RunWait("Dism.exe /Mount-Wim /WimFile:" & (GUICtrlRead($Input1) & " /index:" & ($iIndex) & " /MountDir:" & (GUICtrlRead($Input2))))
            EndIf
        Case $Button4
            RunWait("Dism.exe /UnMount-Wim /MountDir:" & (GUICtrlRead($Input2) & " /commit"))
        Case $Button5
            RunWait("Dism.exe /UnMount-Wim /MountDir:" & (GUICtrlRead($Input2) & " /discard"))
        Case $Button6
            Run(@ComSpec & " /c Dism.exe /Cleanup-wim && Pause")
    EndSwitch
WEnd

Edited March 21, 2014 by trashy

trashy · March 21, 2014

I've accomplished everything I set out to. Replaced ListView with UpDown, that solved

all problems with index selection. MsgBox displays Wim Info, warnings if wim file or mount folder not provided.

It was really looking sweet and then I discovered a major glitch. I always work from root directory, especially

when dealing with large files. It wasn't untill I stared browsing for another wim file That I discovered this problem.

It will only work from root directory, Wim file can only be inside 1 folder no sub dir. Doesn't matter where

dismgui.exe is located. This has got me baffled, what would cause something like this.

Dism commandline works without a hitch. I seriously need some HELP with this one.

That's it, the script was working great but without the capability to get a wim file from any sub directory

makes it all pretty worthless! Help me Please.

DISMGUI

#region ;**** Directives created by AutoIt3Wrapper_GUI ****
#AutoIt3Wrapper_Add_Constants=n
#AutoIt3Wrapper_Run_Tidy=y
#endregion ;**** Directives created by AutoIt3Wrapper_GUI ****
#include <ButtonConstants.au3>
#include <GUIConstantsEx.au3>
#include <GuiListView.au3>
#include <StaticConstants.au3>
#include <WindowsConstants.au3>
#include <ListViewConstants.au3>
#include <SendMessage.au3>
#include <Constants.au3>
#include <UpdownConstants.au3>


$Form1 = GUICreate("DISM GUI", 615, 438, 192, 124)
$Label1 = GUICtrlCreateLabel("Wim File", 40, 45, 56, 17)
$Label2 = GUICtrlCreateLabel("Mount Folder", 40, 96, 65, 17)
$Label3 = GUICtrlCreateLabel("Image Index", 40, 168, 60, 17)
$Label4 = GUICtrlCreateLabel("Mount", 180, 148, 56, 17)
$Label5 = GUICtrlCreateLabel("UnMount", 325, 148, 56, 17)
$Label6 = GUICtrlCreateLabel("Clean Corrupt Mount Points", 20, 384, 80, 27)
$Input1 = GUICtrlCreateInput("", 40, 60, 401, 25)
$Input2 = GUICtrlCreateInput("", 40, 112, 401, 25)
$input3 = GUICtrlCreateInput("1", 105, 168, 35, 20)
GUICtrlCreateUpdown($input3)
GUICtrlSetLimit(-1, 10, 1)
$Button1 = GUICtrlCreateButton("Browse", 480, 60, 75, 25)
$Button2 = GUICtrlCreateButton("Browse", 480, 112, 75, 25)
$Button3 = GUICtrlCreateButton("Mount", 160, 168, 75, 25)
$Button4 = GUICtrlCreateButton("Commit", 260, 168, 75, 25)
$Button5 = GUICtrlCreateButton("Discard", 360, 168, 75, 25)
$Button6 = GUICtrlCreateButton("Clean", 100, 384, 75, 25)
$Button7 = GUICtrlCreateButton("Exit", 264, 384, 75, 25)
$listview1 = GUICtrlCreateListView("", 40, 220, 500, 150)
GUISetState(@SW_SHOW)

While 1
    $nMsg = GUIGetMsg()
    Switch $nMsg
        Case $GUI_EVENT_CLOSE, $Button7
            Exit
        Case $Button1
            $of_Button1 = FileOpenDialog("Select WIM File : ", @HomeDrive, "WIM Files (*.wim)", 1, "")
            GUICtrlSetData($Input1, $of_Button1)
;~ ================================================================================================================
;~ I want to populate $listview1 with info from $tOutput instead of $1 MsgBox
;~ ================================================================================================================
            $aRun = Run(@ComSpec & " /k Dism.exe /Get-WimInfo /WimFile:" & (GUICtrlRead($Input1)), "", @SW_SHOW, $STDOUT_CHILD)
            $tOutput = ""
            While 1
                $tOutput &= StdoutRead($aRun)
                If @error Then ExitLoop
                Sleep(50)
            WEnd
            GUICtrlCreateListViewItem($tOutput, $listview1)
            $1 = MsgBox(262144, "Wim Info", $tOutput)
;~ ================================================================================================================
;~ I want to populate $listview1 with info from $tOutput instead of $1 MsgBox
;~ ================================================================================================================
        Case $Button2
            $of_Button2 = FileSelectFolder("Select Mount Folder", "")
            GUICtrlSetData($Input2, $of_Button2)
        Case $Button3
            If GUICtrlRead($Input1) = "" Then
                MsgBox(0, "Empty.....", "No WIM File Selected!")
                ContinueLoop
            EndIf
            If GUICtrlRead($Input2) = "" Then
                MsgBox(0, "Empty.....", "No Mount Folder Selected!")
                ContinueLoop
            EndIf
            $iIndex = GUICtrlRead($input3)
            $hRun = Run(@ComSpec & " /k Dism.exe /Get-WimInfo /WimFile:" & (GUICtrlRead($Input1) & " /index:" & ($iIndex)), "", @SW_SHOW, $STDOUT_CHILD)
            $sOutput = ""
            While 1
                $sOutput &= StdoutRead($hRun)
                If @error Then ExitLoop
                Sleep(50)
            WEnd
            $2 = MsgBox(262144 + 4 + 32, "Wim Info", $sOutput & @CRLF & "Do you wish to continue?")
            If $2 = 6 Then
                RunWait("Dism.exe /Mount-Wim /WimFile:" & (GUICtrlRead($Input1) & " /index:" & ($iIndex) & " /MountDir:" & (GUICtrlRead($Input2))))
            EndIf
        Case $Button4
            RunWait("Dism.exe /UnMount-Wim /MountDir:" & (GUICtrlRead($Input2) & " /commit"))
        Case $Button5
            RunWait("Dism.exe /UnMount-Wim /MountDir:" & (GUICtrlRead($Input2) & " /discard"))
        Case $Button6
            Run(@ComSpec & " /c Dism.exe /Cleanup-wim && Pause")
    EndSwitch
WEnd

iamtheky · March 21, 2014

I would bet a dollar it is an issue with spaces in the path, not an issue with subdirectories. Use this for case 3

Case $Button3
            $iIndex = _GUICtrlListView_GetSelectedIndices($listview)
            msgbox(0, '' , 'RunWait("Dism.exe /Mount-Wim /WimFile:"' & GUICtrlRead($Input1) & '" /index:"' & $iIndex & '" /MountDir:"' & GUICtrlRead($Input2))

you will see in the msgbox that the result of your command...is not so much a command when spaces are involved, also it does not appear that $iIndex is doing what you think it is. If it is just a variable then the parentheses are unnecessary. Also, the functions do not go in parentheses (though it seemingly worked fine), just the arguments - I fixed the cosmetics, take a stab at the spacing as it is good to learn to use a mixture of single and double quotes to accomplish your desired needs. And use msgbox or consolewrite to debug.

Edited March 21, 2014 by boththose

trashy · March 22, 2014

I was thinking along the same lines as bothose and was trying every combination possible of quotes.

Lets focus on Case $Button1

I started deactivating lines, functions , one by one untill I found the problem.

I deactivated the line for FileOpenDialog function and typed C:X17-24394sourcesboot.wim into $Input1 box

and it worked. Enter any path.wim in input box manually and it works every time.

Have I not applied the FileOpenDialog function correctly or what. HELP!

All this time I thought it was error in my run command syntax.

I added a bunch of side notes as to what function did what and what I thought the problem was

#include <ButtonConstants.au3>
#include <GUIConstantsEx.au3>
#include <GuiListView.au3>
#include <StaticConstants.au3>
#include <WindowsConstants.au3>
#include <ListViewConstants.au3>
#include <SendMessage.au3>
#include <Constants.au3>

$Form1 = GUICreate("DISM GUI", 615, 438, 192, 124)
$Label1 = GUICtrlCreateLabel("Wim File", 40, 45, 56, 17)
$Label2 = GUICtrlCreateLabel("Mount Folder", 40, 96, 65, 17)
$Label3 = GUICtrlCreateLabel("Image Index", 40, 168, 60, 17)
$Label4 = GUICtrlCreateLabel("Mount", 180, 148, 56, 17)
$Label5 = GUICtrlCreateLabel("UnMount", 325, 148, 56, 17)
$Label6 = GUICtrlCreateLabel("Clean Corrupt Mount Points", 20, 384, 80, 27)
$Input1 = GUICtrlCreateInput("", 40, 60, 401, 25) ;Displays complete path and .wim
$Input2 = GUICtrlCreateInput("", 40, 112, 401, 25) ;Displays mount folder
$input3 = GUICtrlCreateInput("1", 105, 168, 35, 20) ;Displays index number from UpDown
GUICtrlCreateUpdown($input3) ;UpDown select image index
GUICtrlSetLimit(-1, 10, 1)
$Button1 = GUICtrlCreateButton("Browse", 480, 60, 75, 25) ;Browse for .wim file
$Button2 = GUICtrlCreateButton("Browse", 480, 112, 75, 25) ;Browse for mount folder
$Button3 = GUICtrlCreateButton("Mount", 160, 168, 75, 25) ;Mount
$Button4 = GUICtrlCreateButton("Commit", 260, 168, 75, 25)
$Button5 = GUICtrlCreateButton("Discard", 360, 168, 75, 25)
$Button6 = GUICtrlCreateButton("Clean", 100, 384, 75, 25)
$Button7 = GUICtrlCreateButton("Exit", 264, 384, 75, 25)
GUISetState(@SW_SHOW)

While 1
    $nMsg = GUIGetMsg()
    Switch $nMsg
        Case $GUI_EVENT_CLOSE, $Button7
            Exit
        Case $Button1
            ;$of_Button1 = FileOpenDialog("Select WIM File : ", @HomeDrive, "WIM Files (*.wim)", 1) ;Opens explore To search For wim file ;Required for line 39 t0 w0rk
            ;GUICtrlSetData($Input1, $of_Button1) ;Sends full path.wim to $Input1 ;Required for line 39 t0 w0rk
            Run(@ComSpec & " /k Dism.exe /Get-WimInfo /WimFile:" & GUICtrlRead($Input1)) ;This only works in root of drive or 1 folder no sub directories, displays wim info in cmd console
            ;Run(@ComSpec & " /k Dism.exe /Get-WimInfo /WimFile:C:\X17-24394\sources\boot.wim") ;This works displays wim info in cmd console as long as full path and wim are defined with no variables

    ; ~ The function below is to pass wim info from cmd console to $1 = MsgBox and hide cmd console and is not part of the problem ~ ;
            ;$aRun =    Run(@ComSpec & " /k Dism.exe /Get-WimInfo /WimFile:" & GUICtrlRead($Input1), "", @SW_SHOW, $STDOUT_CHILD)
            ;$tOutput = ""
            ;While 1
                ;$tOutput &= StdOutRead($aRun)
                ;If @error Then ExitLoop
                ;Sleep(50)
            ;WEnd
                ;$1 = MsgBox(262144, "Wim Info", $tOutput)
        Case $Button2
            $of_Button2 = FileSelectFolder("Select Mount Folder", "")
            GUICtrlSetData($Input2, $of_Button2)
        Case $Button3
        If GuiCtrlRead($input1) = "" Then
            MsgBox (0,"Empty.....", "No WIM File Selected!")
            ContinueLoop
        EndIf
        If GuiCtrlRead($input2) = "" Then
            MsgBox (0,"Empty.....", "No Mount Folder Selected!")
            ContinueLoop
        EndIf
            $iIndex = GUICtrlRead($input3)
            $hRun = Run(@ComSpec & " /k Dism.exe /Get-WimInfo /WimFile:" & (GUICtrlRead($Input1) & " /index:" & ($iIndex)), "", @SW_SHOW, $STDOUT_CHILD)
            $sOutput = ""
            While 1
                $sOutput &= StdOutRead($hRun)
                If @error Then ExitLoop
                Sleep(50)
            WEnd
            $2 = MsgBox(262144 + 4 + 32, "Wim Info", $sOutput & @CRLF & "Do you wish to continue?")
                If $2 = 6 Then
                RunWait("Dism.exe /Mount-Wim /WimFile:" & (GUICtrlRead($Input1) & " /index:" & ($iIndex) & " /MountDir:" & (GUICtrlRead($Input2))))
            EndIf
        Case $Button4
            RunWait("Dism.exe /UnMount-Wim /MountDir:" & (GUICtrlRead($Input2) & " /commit"))
        Case $Button5
            RunWait("Dism.exe /UnMount-Wim /MountDir:" & (GUICtrlRead($Input2) & " /discard"))
        Case $Button6
            Run(@ComSpec & " /c Dism.exe /Cleanup-wim && Pause")
    EndSwitch
WEnd

iamtheky · March 22, 2014

#include <ButtonConstants.au3>
#include <GUIConstantsEx.au3>
#include <GuiListView.au3>
#include <StaticConstants.au3>
#include <WindowsConstants.au3>
#include <ListViewConstants.au3>
#include <SendMessage.au3>
#include <Constants.au3>

$Form1 = GUICreate("DISM GUI", 615, 438, 192, 124)
$Label1 = GUICtrlCreateLabel("Wim File", 40, 45, 56, 17)
$Label2 = GUICtrlCreateLabel("Mount Folder", 40, 96, 65, 17)
$Label3 = GUICtrlCreateLabel("Image Index", 40, 168, 60, 17)
$Label4 = GUICtrlCreateLabel("Mount", 180, 148, 56, 17)
$Label5 = GUICtrlCreateLabel("UnMount", 325, 148, 56, 17)
$Label6 = GUICtrlCreateLabel("Clean Corrupt Mount Points", 20, 384, 80, 27)
$Input1 = GUICtrlCreateInput("", 40, 60, 401, 25) ;Displays complete path and .wim
$Input2 = GUICtrlCreateInput("", 40, 112, 401, 25) ;Displays mount folder
$input3 = GUICtrlCreateInput("1", 105, 168, 35, 20) ;Displays index number from UpDown
GUICtrlCreateUpdown($input3) ;UpDown select image index
GUICtrlSetLimit(-1, 10, 1)
$Button1 = GUICtrlCreateButton("Browse", 480, 60, 75, 25) ;Browse for .wim file
$Button2 = GUICtrlCreateButton("Browse", 480, 112, 75, 25) ;Browse for mount folder
$Button3 = GUICtrlCreateButton("Mount", 160, 168, 75, 25) ;Mount
$Button4 = GUICtrlCreateButton("Commit", 260, 168, 75, 25)
$Button5 = GUICtrlCreateButton("Discard", 360, 168, 75, 25)
$Button6 = GUICtrlCreateButton("Clean", 100, 384, 75, 25)
$Button7 = GUICtrlCreateButton("Exit", 264, 384, 75, 25)
GUISetState(@SW_SHOW)

While 1
    $nMsg = GUIGetMsg()
    Switch $nMsg
        Case $GUI_EVENT_CLOSE, $Button7
            Exit
        Case $Button1
            $of_Button1 = FileOpenDialog("Select WIM File : ", @HomeDrive, "ANY Files (*.*)", 1) ;Opens explore To search For wim file ;Required for line 39 t0 w0rk
            GUICtrlSetData($Input1, $of_Button1) ;Sends full path.wim to $Input1 ;Required for line 39 t0 w0rk
            msgbox(0,'' , GUICtrlRead($input1))
            run("cmd /k icacls " & GUICtrlRead($input1))
            run("cmd /k icacls " & '"' & GUICtrlRead($input1) & '"')
;~             Run(@ComSpec & " /k Dism.exe /Get-WimInfo /WimFile:" & GUICtrlRead($Input1)) ;This only works in root of drive or 1 folder no sub directories, displays wim info in cmd console
;~             Run(@ComSpec & " /k Dism.exe /Get-WimInfo /WimFile:C:\X17-24394\sources\boot.wim") ;This works displays wim info in cmd console as long as full path and wim are defined with no variables

    ; ~ The function below is to pass wim info from cmd console to $1 = MsgBox and hide cmd console and is not part of the problem ~ ;
            ;$aRun =    Run(@ComSpec & " /k Dism.exe /Get-WimInfo /WimFile:" & GUICtrlRead($Input1), "", @SW_SHOW, $STDOUT_CHILD)
            ;$tOutput = ""
            ;While 1
                ;$tOutput &= StdOutRead($aRun)
                ;If @error Then ExitLoop
                ;Sleep(50)
            ;WEnd
                ;$1 = MsgBox(262144, "Wim Info", $tOutput)
        Case $Button2
            $of_Button2 = FileSelectFolder("Select Mount Folder", "")
            GUICtrlSetData($Input2, $of_Button2)
        Case $Button3
        If GuiCtrlRead($input1) = "" Then
            MsgBox (0,"Empty.....", "No WIM File Selected!")
            ContinueLoop
        EndIf
        If GuiCtrlRead($input2) = "" Then
            MsgBox (0,"Empty.....", "No Mount Folder Selected!")
            ContinueLoop
        EndIf
            $iIndex = GUICtrlRead($input3)
            $hRun = Run(@ComSpec & " /k Dism.exe /Get-WimInfo /WimFile:" & (GUICtrlRead($Input1) & " /index:" & ($iIndex)), "", @SW_SHOW, $STDOUT_CHILD)
            $sOutput = ""
            While 1
                $sOutput &= StdOutRead($hRun)
                If @error Then ExitLoop
                Sleep(50)
            WEnd
            $2 = MsgBox(262144 + 4 + 32, "Wim Info", $sOutput & @CRLF & "Do you wish to continue?")
                If $2 = 6 Then
                RunWait("Dism.exe /Mount-Wim /WimFile:" & (GUICtrlRead($Input1) & " /index:" & ($iIndex) & " /MountDir:" & (GUICtrlRead($Input2))))
            EndIf
        Case $Button4
            RunWait("Dism.exe /UnMount-Wim /MountDir:" & (GUICtrlRead($Input2) & " /commit"))
        Case $Button5
            RunWait("Dism.exe /UnMount-Wim /MountDir:" & (GUICtrlRead($Input2) & " /discard"))
        Case $Button6
            Run(@ComSpec & " /c Dism.exe /Cleanup-wim && Pause")
    EndSwitch
WEnd

so hit your browse button.

Select a file with spaces in a sub folder with spaces.

*your read is fine as shown by msgbox

one command window will fail and one will succeed. Im guessing wrapping your reads similarly may fix your issue.

Edited March 22, 2014 by boththose

trashy · March 22, 2014

Folder and File names can not contain spaces, that's old school, wasn't the problem.

Your script wasn't returning the desired info about the images inside the wim file.

This was really getting mind boggling. It has nothing to do with dir and sub dir.

Process for manipulating Wim files, Extract Windows Install files from iso or dvd to folder on hard drive.

Wim location in sources folder and guess what else is located in that folder among a hundred other files.

DISM.EXE. As soon as I got rid of it script runs flawlessly. DAM

I did all my testing on a single boot.wim extracted to the root of C drive so I didn't have a problem till

I started browsing for other wim files. Kick me, beat me like a step child whatever.

Now just to figure out how to get around dism conflict, can't permanently delete.

Thanks boththose I took your advice and removed parentheses from functions.

Next is to set tabs and start working on other dism functions.

#include <ButtonConstants.au3>
#include <GUIConstantsEx.au3>
#include <GuiListView.au3>
#include <StaticConstants.au3>
#include <WindowsConstants.au3>
#include <ListViewConstants.au3>
#include <SendMessage.au3>
#include <Constants.au3>

$Form1 = GUICreate("DISM GUI", 615, 438, 192, 124)
$Label1 = GUICtrlCreateLabel("Wim File", 40, 45, 56, 17)
$Label2 = GUICtrlCreateLabel("Mount Folder", 40, 96, 65, 17)
$Label3 = GUICtrlCreateLabel("Image Index", 40, 168, 60, 17)
$Label4 = GUICtrlCreateLabel("Mount", 180, 148, 56, 17)
$Label5 = GUICtrlCreateLabel("UnMount", 325, 148, 56, 17)
$Label6 = GUICtrlCreateLabel("Clean Corrupt Mount Points", 20, 384, 80, 27)
$Input1 = GUICtrlCreateInput("", 40, 60, 401, 25)
$Input2 = GUICtrlCreateInput("", 40, 112, 401, 25)
$input3 = GUICtrlCreateInput("1", 105, 168, 35, 20)
GUICtrlCreateUpdown($input3)
GUICtrlSetLimit(-1, 10, 1)
$Button1 = GUICtrlCreateButton("Browse", 480, 60, 75, 25)
$Button2 = GUICtrlCreateButton("Browse", 480, 112, 75, 25)
$Button3 = GUICtrlCreateButton("Mount", 160, 168, 75, 25)
$Button4 = GUICtrlCreateButton("Commit", 260, 168, 75, 25)
$Button5 = GUICtrlCreateButton("Discard", 360, 168, 75, 25)
$Button6 = GUICtrlCreateButton("Clean", 100, 384, 75, 25)
$Button7 = GUICtrlCreateButton("Exit", 264, 384, 75, 25)
$listview1 = GUICtrlCreateListView("", 40, 220, 500, 150)
GUISetState(@SW_SHOW)

While 1
    $nMsg = GUIGetMsg()
    Switch $nMsg
        Case $GUI_EVENT_CLOSE, $Button7
            Exit
        Case $Button1
            $of_Button1 = FileOpenDialog("Select WIM File : ", @HomeDrive, "WIM Files (*.wim)", 1, "")
            GUICtrlSetData($Input1, $of_Button1)
;~ ================================================================================================================
;~ I want to populate $listview1 with info from $tOutput instead of $1 MsgBox
;~ ================================================================================================================
            $aRun = Run(@ComSpec & " /k Dism.exe /Get-WimInfo /WimFile:" & GUICtrlRead($Input1), "", @SW_SHOW, $STDOUT_CHILD)
            $tOutput = ""
            While 1
                $tOutput &= StdOutRead($aRun)
                If @error Then ExitLoop
                Sleep(50)
            WEnd
            $1 = MsgBox(262144, "Wim Info", $tOutput)
;~ ================================================================================================================
;~ I want to populate $listview1 with info from $tOutput instead of $1 MsgBox
;~ ================================================================================================================
        Case $Button2
            $of_Button2 = FileSelectFolder("Select Mount Folder", "")
            GUICtrlSetData($Input2, $of_Button2)
        Case $Button3
        If GuiCtrlRead($input1) = "" Then
            MsgBox (0,"Empty.....", "No WIM File Selected!")
            ContinueLoop
        EndIf
        If GuiCtrlRead($input2) = "" Then
            MsgBox (0,"Empty.....", "No Mount Folder Selected!")
            ContinueLoop
        EndIf
            $iIndex = GUICtrlRead($input3)
            $hRun = Run(@ComSpec & " /k Dism.exe /Get-WimInfo /WimFile:" & GUICtrlRead($Input1) & " /index:" & $iIndex, "", @SW_SHOW, $STDOUT_CHILD)
            $sOutput = ""
            While 1
                $sOutput &= StdOutRead($hRun)
                If @error Then ExitLoop
                Sleep(50)
            WEnd
            $2 = MsgBox(262144 + 4 + 32, "Wim Info", $sOutput & @CRLF & "Do you wish to continue?")
                If $2 = 6 Then
                RunWait("Dism.exe /Mount-Wim /WimFile:" & GUICtrlRead($Input1) & " /index:" & $iIndex & " /MountDir:" & (GUICtrlRead($Input2)))
            EndIf
        Case $Button4
            RunWait("Dism.exe /UnMount-Wim /MountDir:" & GUICtrlRead($Input2) & " /commit")
        Case $Button5
            RunWait("Dism.exe /UnMount-Wim /MountDir:" & GUICtrlRead($Input2) & " /discard")
        Case $Button6
            Run(@ComSpec & " /c Dism.exe /Cleanup-wim && Pause")
    EndSwitch
WEnd

iamtheky · March 22, 2014

They can absolutely contain spaces,

Are you saying there are still files of varying subdirectory and name, that cannot be executed because they are in a subdirectory or have spaces in the path? That is the only misunderstanding my example was trying to address.

put a cmd /k before the dism commands and post screenshots of the command failing.

Edited March 22, 2014 by boththose

trashy · March 22, 2014

What I meant was I never use spaces in folder names because it can cause conflicts.

The cause of the conflict turned out to be dism.exe in the same folder that contained the wim file.

I just used a cmd to rename it and problem solved. This only occur when using variables.

Example:

RunWait("Dism.exe /Mount-Wim /WimFile:" & GUICtrlRead($Input1) & " /index:" & GUICtrlRead($input3) & " /MountDir:" & GUICtrlRead($Input2))

If dism is in the same folder you got a problem.

Example:

RunWait("Dism /Mount-Wim /WimFile:C:NewfolderX17-24394sourcesboot.wim /index:1 /MountDir:C:mount2")

This works doesn't mater if dism is in the same folder, solid cmd line no breaks everything enclosed in parentheses.

I'm a dummy when it comes to dos cmd or any kind of script. I know k=keep but I had to look up cacls.

Can't type worth a crap either. Those are the 2 biggest reasons I prefer using a GUI, hopefully I'll learn something along the way.

Adding driver packs with dism is next thing I want to add.

Thanks for your help.

trashy · March 23, 2014

DISM ProgressBar

I can successfully hide the console window and get the dism info to a msgbox but how to get the progress.

#include <Constants.au3>

$cRun = Run(@ComSpec & " /c Dism.exe /Mount-Wim /WimFile:C:\Newfolder\X17-24394\sources\boot.wim /index:1 /MountDir:C:\mount2", "", @SW_HIDE, $STDERR_CHILD + $STDOUT_CHILD)
ProcessWaitClose($cRun, 2)
$cOutput = StdoutRead($cRun)
MsgBox(0, "Wim Mount", $cOutput)

The only post I found concerning the subject:

Using Mats Console.au3 got a ProgressBar to popup but didn't show any progress.

Added driver pack install and tweaked script a little

#region ;**** Directives created by AutoIt3Wrapper_GUI ****
#AutoIt3Wrapper_Run_Tidy=y
#AutoIt3Wrapper_Tidy_Stop_OnError=n
#endregion ;**** Directives created by AutoIt3Wrapper_GUI ****
#include <ButtonConstants.au3>
#include <GUIConstantsEx.au3>
#include <GuiListView.au3>
#include <StaticConstants.au3>
#include <WindowsConstants.au3>
#include <ListViewConstants.au3>
#include <SendMessage.au3>
#include <Constants.au3>

$Form1 = GUICreate("DISM GUI", 615, 440, 192, 124)
$Label0 = GUICtrlCreateLabel("Mount Image", 270, 10, 65, 17)
$Label1 = GUICtrlCreateLabel("Wim File", 40, 45, 56, 17)
$Label2 = GUICtrlCreateLabel("Mount Folder", 40, 96, 65, 17)
$Label3 = GUICtrlCreateLabel("Image Index", 40, 168, 60, 17)
$Label4 = GUICtrlCreateLabel("Mount", 180, 148, 56, 17)
$Label5 = GUICtrlCreateLabel("UnMount", 325, 148, 56, 17)
$Label6 = GUICtrlCreateLabel("Clean Corrupt Mount Points", 20, 384, 80, 27)
$Label7 = GUICtrlCreateLabel("Single Driver (.inf)", 40, 250, 85, 17)
$Label8 = GUICtrlCreateLabel("Driver Folder (multi)", 40, 300, 90, 17)
$Label9 = GUICtrlCreateLabel("Add drivers", 270, 230, 65, 17)
$Input1 = GUICtrlCreateInput("", 40, 60, 401, 25)
$Input2 = GUICtrlCreateInput("", 40, 112, 401, 25)
$input3 = GUICtrlCreateInput("1", 105, 168, 35, 20)
$input4 = GUICtrlCreateInput("", 40, 270, 401, 25)
$input5 = GUICtrlCreateInput("", 40, 320, 401, 25)
GUICtrlCreateUpdown($input3)
GUICtrlSetLimit(-1, 10, 1)
$Button1 = GUICtrlCreateButton("Browse", 480, 60, 75, 25)
$Button2 = GUICtrlCreateButton("Browse", 480, 112, 75, 25)
$Button3 = GUICtrlCreateButton("Mount", 160, 168, 75, 25)
$Button4 = GUICtrlCreateButton("Commit", 260, 168, 75, 25)
$Button5 = GUICtrlCreateButton("Discard", 360, 168, 75, 25)
$Button6 = GUICtrlCreateButton("Clean", 100, 384, 75, 25)
$Button7 = GUICtrlCreateButton("Exit", 264, 384, 75, 25)
$Button8 = GUICtrlCreateButton("Browse", 480, 270, 75, 25)
$Button9 = GUICtrlCreateButton("Browse", 480, 320, 75, 25)
GUISetState(@SW_SHOW)

_AddVertSep(10, 10, 200, $SS_ETCHEDFRAME)
_AddHorzSep(10, 210, 550, $SS_ETCHEDFRAME)
Func _AddVertSep($iX, $iY, $iH, $SS_ETCHEDFRAME)
    GUICtrlCreateLabel("", $iX, $iY, 1, $iH, $SS_ETCHEDFRAME)

EndFunc   ;==>_AddVertSep

Func _AddHorzSep($iX, $iY, $iW, $SS_ETCHEDFRAME)
    GUICtrlCreateLabel("", $iX, $iY, $iW, 1, $SS_ETCHEDFRAME)

EndFunc   ;==>_AddHorzSep

While 1
    $nMsg = GUIGetMsg()
    Switch $nMsg
        Case $GUI_EVENT_CLOSE, $Button7
            If FileExists("newdism.exe") Then
                $sFileOld = "newdism.exe"
                $sFileRenamed = "dism.exe"
                FileMove($sFileOld, $sFileRenamed)
            EndIf
            Exit
        Case $Button1
            $of_Button1 = FileOpenDialog("Select WIM File : ", @HomeDrive, "WIM Files (*.wim)", 1, "")
            GUICtrlSetData($Input1, $of_Button1)
            If FileExists("dism.exe") Then
                $sFileOld = "dism.exe"
                $sFileRenamed = "newdism.exe"
                FileMove($sFileOld, $sFileRenamed)
            EndIf
            $aRun = Run(@ComSpec & " /c Dism.exe /Get-WimInfo /WimFile:" & GUICtrlRead($Input1), "", @SW_HIDE, $STDERR_CHILD + $STDOUT_CHILD)
            ProcessWaitClose($aRun, 2)
            $aOutput = StdoutRead($aRun)
            MsgBox(262144, "Wim Info", $aOutput)
        Case $Button2
            $of_Button2 = FileSelectFolder("Select Mount Folder", "")
            GUICtrlSetData($Input2, $of_Button2)
        Case $Button3
            If GUICtrlRead($Input1) = "" Then
                MsgBox(0, "Empty.....", "No WIM File Selected!")
                ContinueLoop
            EndIf
            If GUICtrlRead($Input2) = "" Then
                MsgBox(0, "Empty.....", "No Mount Folder Selected!")
                ContinueLoop
            EndIf
            $bRun = Run(@ComSpec & " /c Dism.exe /Get-WimInfo /WimFile:" & GUICtrlRead($Input1) & " /index:" & GUICtrlRead($input3), "", @SW_HIDE, $STDERR_CHILD + $STDOUT_CHILD)
            ProcessWaitClose($bRun, 2)
            $bOutput = StdoutRead($bRun)
            $2 = MsgBox(262144 + 4 + 32, "Wim Info", $bOutput & @CRLF & "Do you wish to continue?")
            If $2 = 6 Then
                RunWait("Dism.exe /Mount-Wim /WimFile:" & GUICtrlRead($Input1) & " /index:" & GUICtrlRead($input3) & " /MountDir:" & GUICtrlRead($Input2))
            EndIf
        Case $Button4
            RunWait("Dism.exe /UnMount-Wim /MountDir:" & GUICtrlRead($Input2) & " /commit")
        Case $Button5
            RunWait("Dism.exe /UnMount-Wim /MountDir:" & GUICtrlRead($Input2) & " /discard")

        Case $Button6
            Run(@ComSpec & " /c Dism.exe /Cleanup-wim && Pause")
        Case $Button8
            If GUICtrlRead($Input2) = "" Then
                MsgBox(0, "Empty.....", "No Mount Folder Selected!")
                ContinueLoop
            EndIf
            $of_Button8 = FileOpenDialog("Select INF File : ", @HomeDrive, "INF Files (*.inf)", 1, "")
            GUICtrlSetData($input4, $of_Button8)
            If GUICtrlRead($Input2) = "" Then
                MsgBox(0, "Empty.....", "No Mount Folder Selected!")
                ContinueLoop
            EndIf
            RunWait(@ComSpec & " /k Dism.exe /Image:" & GUICtrlRead($Input2) & " /Add-Driver /Driver:" & GUICtrlRead($input4))
            MsgBox(0, "Finished", "If you are satisfied with results" & @CRLF & "And finished injecting drivers" & @CRLF & "Click Commit above")
            ;Dism /Image:C:\test\offline /Add-Driver /Driver:C:\drivers\mydriver.inf
        Case $Button9
            $of_Button9 = FileSelectFolder("Select Driver Folder", "")
            GUICtrlSetData($input5, $of_Button9)
            If GUICtrlRead($Input2) = "" Then
                MsgBox(0, "Empty.....", "No Mount Folder Selected!")
                ContinueLoop
            EndIf
            RunWait(@ComSpec & " /c Dism.exe /Image:" & GUICtrlRead($Input2) & " /Add-Driver /Driver:" & GUICtrlRead($input5) & " /Recurse & Pause")
            MsgBox(0, "Finished", "If you are satisfied with results" & @CRLF & "And finished injecting drivers" & @CRLF & "Click Commit above")
            ;Dism /Image:C:\test\offline /Add-Driver /Driver:c:\drivers /Recurse
    EndSwitch
WEnd

DISM GUI (WIP)

Recommended Posts

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Create an account or sign in to comment

Create an account

Sign in

Recently Browsing 0 members