New SciTE4AutoIt3 available with SciTE v3.4.1

[Richard Robertson]

I'm glad that SciTE is finally set to use the application data folder for application data by default. That kept bothering me because when I would install AutoIt, I'd have to track down the global properties file and change it every time.

[Loz]

Today I decided to update to AutoIt 3.3.10.2 from 3.3.8.1, and also SciTE (3.4.1) & Au3Stripper (1.2.0.1)

I used Obfuscator previously in /striponly mode to remove the unused junk and reduce exe file sizes.

With Au3Stripper, my scripts broke big time when compiling with numerous variables being stripped despite being used.

I wrote this simple test script, with used and unused Global & Locals variables and all were stripped.

Am I missing something?

Original Code

#Region ;**** Directives created by AutoIt3Wrapper_GUI ****
#AutoIt3Wrapper_Run_Au3Stripper=y
#Au3Stripper_Parameters=/so
#EndRegion ;**** Directives created by AutoIt3Wrapper_GUI ****

Global $globalUsed1='1', $globalUsed2='2', $globalUnused1='3'

_Used()

Func _Used()
    Local $localUsed1=1, $localUsed2=2, $localUnused1=3

    ConsoleWrite($localUsed1 & @CRLF)
    ConsoleWrite($localUsed2 & @CRLF)
    ConsoleWrite($globalUsed1 & @CRLF)
    ConsoleWrite($globalUsed2 & @CRLF)
EndFunc

Func _Unused()
    ConsoleWrite('_Unused' & @CRLF)
EndFunc

Stripped Code

_Used()
Func _Used()
ConsoleWrite($localUsed1 & @CRLF)
ConsoleWrite($localUsed2 & @CRLF)
ConsoleWrite($globalUsed1 & @CRLF)
ConsoleWrite($globalUsed2 & @CRLF)
EndFunc

I can't help but feel I am missing something obvious!

Thanks

Edited April 11, 2014 by Loz

[Jos]

Thanks

I can't help but feel I am missing something obvious!

You didn't miss anything and this looks like an Au3Stripper lexing issue.

It seems that the reason it didn't surface for me is that I tend to run Tidy against my code which puts spaces around the "=" after which it works fine.

I will have a look at this in detail and get a fix published.

Thanks

jos

[Jos]

Uploaded a new beta version of au3stripper v1.2.0.2 that should fix this regression.

Let me know when other issues are found or still having problems.

Jos

[AdamUL]

I was testing different parameters with Au3stripper, and this result was interesting.  

Original Code

#Region ;**** Directives created by AutoIt3Wrapper_GUI ****
#AutoIt3Wrapper_Run_Au3Stripper=y
;~ #Au3Stripper_Parameters=/mo
#Au3Stripper_Parameters=/mo /so
;~ #Au3Stripper_Parameters=/so
;~ #Au3Stripper_Parameters=/rm
;~ #Au3Stripper_Parameters=/pe
;~ #Au3Stripper_Parameters=/pe /rm
#EndRegion ;**** Directives created by AutoIt3Wrapper_GUI ****
#cs ----------------------------------------------------------------------------

 AutoIt Version: 3.3.10.2
 Author:         myName

 Script Function:
    Template AutoIt script.

#ce ----------------------------------------------------------------------------

#include <MsgBoxConstants.au3>

;This is a test.
_Test()

Func _Test()
    MsgBox($MB_SYSTEMMODAL, "Title", "This message box will timeout after 10 seconds or select the OK button.", 10)
EndFunc

;Some other comment

Stripped Code

_Test()

The stripped code of course throws: error: _Test(): undefined function.

 

Adam

[Jos]

Uploaded a new beta version of au3stripper v1.2.0.3 that fixes the mixing of /MO and any other option that would potentially corrupt the code.

/MO will take priority over any other parameter and will be the only task performed when supplied.

Let me know when other issues are found or still having problems.

Jos

[mesale0077]

Original Code

expandcollapse popup

#Region ;**** Directives created by AutoIt3Wrapper_GUI ****
#AutoIt3Wrapper_Run_Au3Stripper=y
;~ #Au3Stripper_Parameters=/mo
#Au3Stripper_Parameters=/mo /so
;~ #Au3Stripper_Parameters=/so
;~ #Au3Stripper_Parameters=/rm
;~ #Au3Stripper_Parameters=/pe
;~ #Au3Stripper_Parameters=/pe /rm
#EndRegion ;**** Directives created by AutoIt3Wrapper_GUI ****


#NoTrayIcon
#include <MsgBoxConstants.au3>
#include <TrayConstants.au3> ; Required for the $TRAY_CHECKED and $TRAY_ICONSTATE_SHOW constants.

Opt("TrayMenuMode", 3) ; The default tray menu items will not be shown and items are not checked when selected. These are options 1 and 2 for TrayMenuMode.

Example()

Func Example()
    ; Create a tray item with the radio item parameter selected.
    TrayCreateItem("Radio 1", -1, -1, 1)
    TrayItemSetState(-1, $TRAY_CHECKED)
    TrayCreateItem("Radio 2", -1, -1, 1)
    TrayCreateItem("Radio 3", -1, -1, 1)

    TrayCreateItem("") ; Create a separator line.

    Local $idAbout = TrayCreateItem("About")
    TrayCreateItem("") ; Create a separator line.

    Local $idExit = TrayCreateItem("Exit")

    TraySetState($TRAY_ICONSTATE_SHOW) ; Show the tray menu.

    While 1
        Switch TrayGetMsg()
            Case $idAbout ; Display a message box about the AutoIt version and installation path of the AutoIt executable.
                MsgBox($MB_SYSTEMMODAL, "", "AutoIt tray menu example." & @CRLF & @CRLF & _
                        "Version: " & @AutoItVersion & @CRLF & _
                        "Install Path: " & StringLeft(@AutoItExe, StringInStr(@AutoItExe, "\", 0, -1) - 1)) ; Find the folder of a full path.

            Case $idExit ; Exit the loop.
                ExitLoop
        EndSwitch
    WEnd
EndFunc   ;==>Example

Stripped Code

#NoTrayIcon
Opt("TrayMenuMode", 3)
Example()

[Jos]

... and you tried the latest posted Beta version?

Please show me the SciTE Output pane info when running au3stripper.

Jos

[AdamUL]

I just tried mesale0077's code with the latest Au3stripper beta, and I get it correctly merged.  

expandcollapse popup

#NoTrayIcon
Global Const $MB_OK = 0
Global Const $MB_OKCANCEL = 1
Global Const $MB_ABORTRETRYIGNORE = 2
Global Const $MB_YESNOCANCEL = 3
Global Const $MB_YESNO = 4
Global Const $MB_RETRYCANCEL = 5
Global Const $MB_CANCELTRYCONTINUE = 6
Global Const $MB_HELP = 0x4000
Global Const $MB_ICONSTOP = 16
Global Const $MB_ICONERROR = 16
Global Const $MB_ICONHAND = 16
Global Const $MB_ICONQUESTION = 32
Global Const $MB_ICONEXCLAMATION = 48
Global Const $MB_ICONWARNING = 48
Global Const $MB_ICONINFORMATION = 64
Global Const $MB_ICONASTERISK = 64
Global Const $MB_USERICON = 0x00000080
Global Const $MB_DEFBUTTON1 = 0
Global Const $MB_DEFBUTTON2 = 256
Global Const $MB_DEFBUTTON3 = 512
Global Const $MB_DEFBUTTON4 = 768
Global Const $MB_APPLMODAL = 0
Global Const $MB_SYSTEMMODAL = 4096
Global Const $MB_TASKMODAL = 8192
Global Const $MB_DEFAULT_DESKTOP_ONLY = 0x00020000
Global Const $MB_RIGHT = 0x00080000
Global Const $MB_RTLREADING = 0x00100000
Global Const $MB_SETFOREGROUND = 0x00010000
Global Const $MB_TOPMOST = 0x00040000
Global Const $MB_SERVICE_NOTIFICATION = 0x00200000
Global Const $MB_RIGHTJUSTIFIED = $MB_RIGHT
Global Const $IDTIMEOUT = -1
Global Const $IDOK = 1
Global Const $IDCANCEL = 2
Global Const $IDABORT = 3
Global Const $IDRETRY = 4
Global Const $IDIGNORE = 5
Global Const $IDYES = 6
Global Const $IDNO = 7
Global Const $IDCLOSE = 8
Global Const $IDHELP = 9
Global Const $IDTRYAGAIN = 10
Global Const $IDCONTINUE = 11
Global Const $TRAY_ITEM_EXIT = 3
Global Const $TRAY_ITEM_PAUSE = 4
Global Const $TRAY_ITEM_FIRST = 7
Global Const $TRAY_CHECKED = 1
Global Const $TRAY_UNCHECKED = 4
Global Const $TRAY_ENABLE = 64
Global Const $TRAY_DISABLE = 128
Global Const $TRAY_FOCUS = 256
Global Const $TRAY_DEFAULT = 512
Global Const $TRAY_EVENT_SHOWICON = -3
Global Const $TRAY_EVENT_HIDEICON = -4
Global Const $TRAY_EVENT_FLASHICON = -5
Global Const $TRAY_EVENT_NOFLASHICON = -6
Global Const $TRAY_EVENT_PRIMARYDOWN = -7
Global Const $TRAY_EVENT_PRIMARYUP = -8
Global Const $TRAY_EVENT_SECONDARYDOWN = -9
Global Const $TRAY_EVENT_SECONDARYUP = -10
Global Const $TRAY_EVENT_MOUSEOVER = -11
Global Const $TRAY_EVENT_MOUSEOUT = -12
Global Const $TRAY_EVENT_PRIMARYDOUBLE = -13
Global Const $TRAY_EVENT_SECONDARYDOUBLE = -14
Global Const $TIP_ICONNONE = 0
Global Const $TIP_ICONASTERISK = 1
Global Const $TIP_ICONEXCLAMATION = 2
Global Const $TIP_ICONHAND = 3
Global Const $TIP_NOSOUND = 16
Global Const $TRAY_ICONSTATE_SHOW = 1
Global Const $TRAY_ICONSTATE_HIDE = 2
Global Const $TRAY_ICONSTATE_FLASH = 4
Global Const $TRAY_ICONSTATE_STOPFLASH = 8
Global Const $TRAY_ICONSTATE_RESET = 16
Opt("TrayMenuMode", 3)
Example()
Func Example()
TrayCreateItem("Radio 1", -1, -1, 1)
TrayItemSetState(-1, $TRAY_CHECKED)
TrayCreateItem("Radio 2", -1, -1, 1)
TrayCreateItem("Radio 3", -1, -1, 1)
TrayCreateItem("")
Local $idAbout = TrayCreateItem("About")
TrayCreateItem("")
Local $idExit = TrayCreateItem("Exit")
TraySetState($TRAY_ICONSTATE_SHOW)
While 1
Switch TrayGetMsg()
Case $idAbout
MsgBox($MB_SYSTEMMODAL, "", "AutoIt tray menu example." & @CRLF & @CRLF & "Version: " & @AutoItVersion & @CRLF & "Install Path: " & StringLeft(@AutoItExe, StringInStr(@AutoItExe, "\", 0, -1) - 1))
Case $idExit
ExitLoop
EndSwitch
WEnd
EndFunc

Adam

[Loz]

The ProductVersion of my compiled scripts is now being populated with the AutoIt version.

Prior to this update the Product Version was set to the value set by this #AutoIt3Wrapper_Res_Field=ProductVersion directive

SOLVED: Further research led me to Directives.au3 file in the AutoIt3Wrapper folder which shows the #AutoIt3Wrapper_Res_ProductVersion directive. I don't know how long that has been available, but it solved my problem.

Thanks

Edited April 12, 2014 by Loz

[mLipok]

I install actual version of AutoIt and scite on clean system.

When I Compile/Build (F7) my script

then i had this info in console

- ### C:\Program Files (x86)\AutoIt3\SciTE\Au3Stripper\Au3Stripper.dat missing... Please get it from the website to make sure the Obfuscation will work correctly.

What you think about this info ?

[Jos]

Did you use the installer?

Could you check whether the  SCITE_USERHOME environment variable is there?

Jos

Edited April 12, 2014 by Jos

[mLipok]

Yes.

Where exactly?

[Jos]

Open a CMD session and type : SET

This will show you all enviroment variables.

One should point SCITE_USERHOME to the user directory like: SCITE_USERHOME=C:UsersJosAppDataLocalAutoIt v3SciTE

That directory should contain a subdirectory called au3stripper which contains the au3stripper.dat file.

Jos

[mLipok]

 

Microsoft Windows [Wersja 6.1.7600]

Copyright © 2009 Microsoft Corporation. Wszelkie prawa zastrzeżone.

C:Usersuser>set

ALLUSERSPROFILE=C:ProgramData

APPDATA=C:UsersuserAppDataRoaming

CommonProgramFiles=C:Program FilesCommon Files

CommonProgramFiles(x86)=C:Program Files (x86)Common Files

CommonProgramW6432=C:Program FilesCommon Files

COMPUTERNAME=NOTEBOOK

ComSpec=C:Windowssystem32cmd.exe

ESET_OPTIONS=

 

FP_NO_HOST_CHECK=NO

HOMEDRIVE=C:

HOMEPATH=Usersuser

LOCALAPPDATA=C:UsersuserAppDataLocal

LOGONSERVER=NOTEBOOK

NUMBER_OF_PROCESSORS=2

OS=Windows_NT

Path=C:Windowssystem32;C:Windows;C:WindowsSystem32Wbem;C:WindowsSystem32WindowsPowerShellv1.0;C:Program Files (x86)GNUGnuPGpub;C:Program Files (x86)WinMerge

PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC

PROCESSOR_ARCHITECTURE=AMD64

PROCESSOR_IDENTIFIER=Intel64 Family 6 Model 23 Stepping 10, GenuineIntel

PROCESSOR_LEVEL=6

PROCESSOR_REVISION=170a

ProgramData=C:ProgramData

ProgramFiles=C:Program Files

ProgramFiles(x86)=C:Program Files (x86)

ProgramW6432=C:Program Files

PROMPT=$P$G

PSModulePath=C:Windowssystem32WindowsPowerShellv1.0Modules

PUBLIC=C:UsersPublic

SCITE_USERHOME=C:UsersuserAppDataLocalAutoIt v3SciTE

SESSIONNAME=Console

SystemDrive=C:

SystemRoot=C:Windows

TEMP=C:UsersuserAppDataLocalTemp

TMP=C:UsersuserAppDataLocalTemp

USERDOMAIN=Notebook

USERNAME=user

USERPROFILE=C:Usersuser

windir=C:Windows

C:Usersuser>

 

EDIT:

is it normal , that the modification and creation date is 08-05-2011 ?

 

EDIT2:

some more info

Win7Pro 64Bit (new installation)

Edited April 12, 2014 by mLipok

[Jos]

So, does the indicated directory C:UsersuserAppDataLocalAutoIt v3SciTE exist and does it contain au3stripperau3stripper.dat?

EDIT:

is it normal , that the modification and creation date is 08-05-2011 ?

That is fine.

Au3stripper looks in the indicated directory for au3stripper.dat and when it doesn't exists expects it to be in this own program directory to make the whole setup portable.

When you are still having issues could you post the total output from the SciTE Outputpane when doing F7/Compile?

Jos

Edited April 13, 2014 by Jos

[mLipok]

In the meantime, I upgraded the system.
For now, I do not know why I can not repeat the problem.
At night, I'll do an analysis and come back with some further information.
Meanwhile, I'm going to visit family.

Regards
mLipok

EDIT: 13-04-2014  23:57

I cannot reproduce this on my notebook.

But tomorrow I configure 5 computers with Windows 7.
I had the opportunity to check and perform additional testing.

EDIT: 16-04-2014 08:58

still cannot reproduce

I return to this issue when I encounter him again.

Edited April 16, 2014 by mLipok

[iCode]

Scite for AutoIt 3.4.1

win 7 x64

1) Saving the Scite options from the UI acts a bit strange; when clicking 'save and apply', then exiting, user is again prompted to save

2) Scite config UI > General 2 tab > Current Word Highlight group ...

For 'Whole word', Match style' and 'Match case', selecting or de-selecting these checkboxes causes something to run in an endless loop (seen by constant flickering in the status control) and settings are not saved

3) I have also had settings revert to their defaults once upon restarting the editor (after the initial install i think). FYI: When i installed the Scite for AutoIt package, i tried to do a clean install; uninstall previous version and delete all left over settings/properties files in %appdata%. The settings are now in 'LocalAutoIt v3SciTE' as they should be.

4) For both this version and the last release (and possibly earlier), highlighting all other instances of a selected string works, but sometimes the other instances lose the highlighting when the document is scrolled

5) For both this version and the last release (and possibly earlier), using Ctrl+F2 to clear a bookmark does not always work

Edited April 16, 2014 by iCode

[FaridAgl]

I guess I found a some kind of bugs in the SciTE while writing a script.

Write the following codes and press Enter:

Switch (1)
    Case 1

It adds 5 lines instead of 1.

[mLipok]

I confirm

and additional issue

Switch
;~  
Case

try to hit enter after Case

and again
try to hit enter after Case

and again
try to hit enter after Case

and again

try to hit enter after Case

and here we have:

Switch
;~  
            Case