Jump to content

How to FileWriteLine() Chinese characters?


Go to solution Solved by Myicq,

Recommended Posts

First, the value of my $LineArray[0] is "歌词制作 生态。破坏"..

And whenever I tried to run this code:

FileWriteLine($PathName, $LineArray[0] & @CRLF)

The line of the created file produced the "???? ?????" null characters..

Now, what can I do to make it write the original (I think) Chinese characters?

Edited by Servant
Link to post
Share on other sites

Servant

it does work as expected...

$filename = @ScriptDir & "\chinesestring"
$string = "北京市 - 邓小平"    ; Beijing - Deng Xiaoping
$f = FileOpen($filename & "_unicode_.txt", 2+64)    ; unicode
$f2 = FileOpen($filename & "_utf8BOM_.txt", 2+128)    ; utf8 with BOM
$f3 = FileOpen($filename & "_utf8plain_.txt", 2+256)    ; utf8 no BOM
FileWriteLine($f, $string)
FileWriteLine($f2, $string)
FileWriteLine($f3, $string)

FileClose($f)
FileClose($f2)
FileClose($f3)
 

 

Result are 3 files as attached.

chinesestring_unicode_.txt

chinesestring_utf8BOM_.txt

chinesestring_utf8plain_.txt

I am just a hobby programmer, and nothing great to publish right now.

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By EmilyLove
      I have a string containing the full path of an executable and an array of executables without their paths. I am trying to compare the string to the list in the array and if a match is found, remove it from the array. The entry get removed from the array successfully, and after checking its return result, uses it to update the ubound if it succeeded, but it doesn't want to update to the new value. Any ideas what I am doing wrong? It acts like it is read-only.
      #include <Array.au3> #include <File.au3> Local $sApp_Exe = "F:\App\Nextcloud\nextcloud.exe" Local $aWaitForEXEX = [3, "Nextcloud.exe", "nextcloudcmd.exe", "QtWebEngineProcess.exe"] For $h = 1 To $aWaitForEXEX[0] If StringInStr($sApp_Exe, $aWaitForEXEX[$h]) <> 0 Then $iRet = _ArrayDelete($aWaitForEXEX, $h) If $iRet <> -1 Then $aWaitForEXEX[0] = $iRet ;this line doesn't work. $aWaitForEXEX[0] doesn't update and shortly gives Error: Array variable has incorrect number of subscripts or subscript dimension range exceeded.: _ArrayDisplay($aWaitForEXEX) EndIf Next  
    • By kovlad
      My solution is to write nested arrays without copying.
      The problem was described hier.
       
      Function:
      #include <Array.au3> ; #FUNCTION# ==================================================================================================================== ; Name ..........: _ArrayNestedSet ; Description ...: Assigns a value to an element of a nested 1D array. ; Syntax ........: _ArrayNestedSet(ByRef $aArray, $vIndex, $vValue) ; Parameters ....: $aArray - an array of arrays. ; $vIndex - an index or 1d-array of indexes; ; a size if $vValue not defined (zero to delete). ; $vValue - a value (create, resize or delete if not defined). ; ; Return values .: on success - 1 ; @extended - nesting level of operation ; on failure - 0 ; @extended - nesting level of error ; @error = 1 - invalid array ; @error = 2 - invalid index ; Author ........: ; Modified ......: kovlad ; Remarks .......: ; Related .......: ; Link ..........: https://www.autoitscript.com/forum/topic/185638-assign-a-value-to-an-array-in-array-element/ ; https://www.autoitscript.com/trac/autoit/ticket/3515?replyto=description ; Example .......: Yes ; =============================================================================================================================== Func _ArrayNestedSet(ByRef $aArray, $vIndex, $vValue = Default) Local $extended = @extended + 1 If IsArray($vIndex) Then If UBound($vIndex, 0) <> 1 Then _ Return SetError(2, $extended) If UBound($vIndex) > 1 Then If UBound($aArray, 0) <> 1 Then _ Return SetError(1, $extended) ; keep index for this array Local $i = $vIndex[0] If $i < 0 Or UBound($aArray) <= $i Then _ Return SetError(2, $extended) ; delete index of this array _ArrayDelete($vIndex, 0) ; recursive function call Local $return = _ArrayNestedSet($aArray[$i], $vIndex, $vValue) If @error Then Return SetError(@error, @extended + 1, 0) Else Return SetExtended(@extended + 1, 1) EndIf Else $vIndex = $vIndex[0] EndIf EndIf If $vValue = Default Then If $vIndex < 0 Then _ Return SetError(2, $extended) If $vIndex = 0 Then ; delete array and free memory $aArray = 0 Return SetExtended($extended, 1) EndIf If UBound($aArray, 0) = 1 Then ; resize array keeping data ReDim $aArray[$vIndex] Return SetExtended($extended, 1) Else ; create new nested array Local $aTmp[$vIndex] $aArray = $aTmp Return SetExtended($extended, 1) EndIf Else If UBound($aArray) <= $vIndex Then _ Return SetError(2, $extended + 1) ; set value of array entry $aArray[$vIndex] = $vValue Return SetExtended($extended, 1) EndIf EndFunc  
      Examples:
      ; write value to 1st nested array ConsoleWrite("@@ Debug(" & @ScriptLineNumber & ") : write value to 1st nested array" & @CRLF) Local $aTmp1[4] = [1,2,3,4] _ArrayDisplay($aTmp1, "$aTmp1") Local $aArray[2] = [$aTmp1] ConsoleWrite( _ "_ArrayNestedSet($aArray[0], 3, 14) = " & _ArrayNestedSet($aArray[0], 3, 14) & @CRLF & _ " @error = " & @error & @CRLF & _ " @extended = " & @extended & @CRLF & @CRLF) _ArrayDisplay($aArray[0], "$aArray[0]") ; resize 1st nested array ConsoleWrite("@@ Debug(" & @ScriptLineNumber & ") : resize 1st nested array" & @CRLF) ConsoleWrite( _ "_ArrayNestedSet($aArray[0], 8) = " & _ArrayNestedSet($aArray[0], 8) & @CRLF & _ " @error = " & @error & @CRLF & _ " @extended = " & @extended & @CRLF & @CRLF) _ArrayDisplay($aArray[0], "$aArray[0]") ; write array to 1st nested array ConsoleWrite("@@ Debug(" & @ScriptLineNumber & ") : write array to 1st nested array" & @CRLF) Local $aTmp11[4] = [11,12,13,14] _ArrayDisplay($aTmp11, "$aTmp11") ConsoleWrite( _ "_ArrayNestedSet($aArray[0], 2, $aTmp11) = " & _ArrayNestedSet($aArray[0], 2, $aTmp11) & @CRLF & _ " @error = " & @error & @CRLF & _ " @extended = " & @extended & @CRLF & @CRLF) _ArrayDisplay(($aArray[0])[2], "($aArray[0])[2]") ; write value to 2nd nested array using index array ConsoleWrite("@@ Debug(" & @ScriptLineNumber & ") : write value to 2nd nested array using index array" & @CRLF) Local $aIndex1[2] = [2,3] _ArrayDisplay($aIndex1, "$aIndex1") ConsoleWrite( _ "_ArrayNestedSet($aArray[0], $aIndex1, 140) = " & _ArrayNestedSet($aArray[0], $aIndex1, 140) & @CRLF & _ " @error = " & @error & @CRLF & _ " @extended = " & @extended & @CRLF & @CRLF) _ArrayDisplay(($aArray[0])[2], "($aArray[0])[2]") ; resize 2nd nested array ConsoleWrite("@@ Debug(" & @ScriptLineNumber & ") : resize 2nd nested array" & @CRLF) Local $aIndex1[2] = [2,8] _ArrayDisplay($aIndex1, "$aIndex1") ConsoleWrite( _ "_ArrayNestedSet($aArray[0], $aIndex1) = " & _ArrayNestedSet($aArray[0], $aIndex1) & @CRLF & _ " @error = " & @error & @CRLF & _ " @extended = " & @extended & @CRLF & @CRLF) _ArrayDisplay(($aArray[0])[2], "($aArray[0])[2]") ; create new 3rd nested array ConsoleWrite("@@ Debug(" & @ScriptLineNumber & ") : create new 3rd nested array" & @CRLF) Local $aIndex2[3] = [2,7,6] _ArrayDisplay($aIndex2, "$aIndex2") ConsoleWrite( _ "_ArrayNestedSet($aArray[0], $aIndex2) = " & _ArrayNestedSet($aArray[0], $aIndex2) & @CRLF & _ " @error = " & @error & @CRLF & _ " @extended = " & @extended & @CRLF & @CRLF) _ArrayDisplay((($aArray[0])[2])[7], ")($aArray[0])[2])[7]") ; delete 3rd nested array ConsoleWrite("@@ Debug(" & @ScriptLineNumber & ") : delete 3rd nested array" & @CRLF) Local $aIndex3[3] = [2,7,0] _ArrayDisplay($aIndex3, "$aIndex2") ConsoleWrite( _ "_ArrayNestedSet($aArray[0], $aIndex3) = " & _ArrayNestedSet($aArray[0], $aIndex3) & @CRLF & _ " @error = " & @error & @CRLF & _ " @extended = " & @extended & @CRLF) ConsoleWrite("IsArray((($aArray[0])[2])[7]) = " & IsArray((($aArray[0])[2])[7]) & @CRLF & @CRLF) ; write 0 in 1st nested array to delete the 2nd nested array ConsoleWrite("@@ Debug(" & @ScriptLineNumber & ") : write 0 in 1st nested array to delete the 2nd nested array" & @CRLF) Local $aIndex4[1] = [2] _ArrayDisplay($aIndex4, "$aIndex4") ConsoleWrite( _ "_ArrayNestedSet($aArray[0], $aIndex4, 0) = " & _ArrayNestedSet($aArray[0], $aIndex4, 0) & @CRLF & _ " @error = " & @error & @CRLF & _ " @extended = " & @extended & @CRLF) ConsoleWrite("IsArray(($aArray[0])[2]) = " & IsArray(($aArray[0])[2]) & @CRLF & @CRLF) ; delete 1st nested array (same as '$aArray[0] = 0') ConsoleWrite("@@ Debug(" & @ScriptLineNumber & ") : delete 1st nested array (same as '$aArray[0] = 0')" & @CRLF) Local $aIndex5[1] = [0] _ArrayDisplay($aIndex5, "$aIndex5") ConsoleWrite( _ "_ArrayNestedSet($aArray[0], $aIndex5) = " & _ArrayNestedSet($aArray[0], $aIndex5) & @CRLF & _ " @error = " & @error & @CRLF & _ " @extended = " & @extended & @CRLF) ConsoleWrite("IsArray($aArray[0]) = " & IsArray($aArray[0]) & @CRLF & @CRLF)  
    • By lIlIIlIllIIIIlI
      $input = $CmdLine[1] $bytes = 1000000 ; 1000000 for 1 MB, 1000 for 1 KB $size = FileGetSize($input) $file = fileopen($input, 16) $max = ceiling($size / $bytes) for $i = 1 to $max $data = fileread($file, $bytes) $output = $input & '_' & $i & 'of' & $max filewrite($output, $data) next ^file split
      file path for a 20MB "video.mp4" is input, it will be output as "video.mp4_1of20", "video.mp4_2of20", etc. change $bytes to affect the split files size, this example made them 1MB (10^6 bytes)
       
      $input = $CmdLine[1] $name = stringtrimright($input, 1 + stringlen($input) - stringinstr($input, '_', 0, -1)) $split = stringsplit($input, 'of', 3) $max = $split[ubound($split) - 1] for $i = 1 to $max $in = $name & '_' & $i & 'of' & $max $file = fileopen($in, 16) $data = fileread($file) fileclose($file) filedelete($in) filewrite($name, $data) next ^ file join
      file path for any of the "video.mp4_Xof20" segments is input. the "video.mp4_Xof20" segments are read and written to "video.mp4" and then deleted, leaving the newly joined "video.mp4" in the end
       
      i made this today because i had a big file that i couldn't really open. i split it into 1000 chunks to make processing and stuff easier. i've also used it to split files to just under 25MB segments so i can attach and mail big files over gmail which is silly but it worked
    • By TheSaint
      I like and have been using TeraCopy, a third party program, for many years. Mostly it is a great program, but it does have some issues. On Windows XP for instance, Thumbs.db files could often hold up a copy or move process until the user manually responded to the error prompt. Some other issues I discuss below.
      PLEASE NOTE - I am not related to or affiliated in any way with the 3rd party TeraCopy program developers.
      ALSO NOTE - I myself have only tested TeraCopy Cure at this point, on Windows 7 (32 bit), and only with the free version of TeraCopy 2.27.
      This program, TeraCopy Cure, is related to another one of my TeraCopy assistant programs, TeraCopy Timer, but aims at being simpler and quicker to use ... if lacking its more advanced features.
      TeraCopy Cure is a frontend for TeraCopy and sets out to make up for its flaws and limitations.
      One of those flaws is queuing order, and the limitation relates to a same destination issue.
      You would think that queue order would be the same as add order, but that is not the case, and if you are doing a mix of COPY and MOVE then the COPY process could easily fail. It could fail with some source items, even if the  COPY process has already started before the same source MOVE process begins ... especially if the destination folder is on the source drive ... only the currently copying file is locked to that process.
      If you drag and drop another source for a same destination as an existing or impending COPY or MOVE process, then usually TeraCopy nicely adds it for you to that existing job. However, you might wish to avoid that, or it might occur during the testing phase of that active process, and then not be properly processed etc. But you are not given a choice and it just gets added.
       
           
      HOW TO USE
      See the right-click menu of the 'Batch List' (lowest field) and the right-click menu of the Tree field, for some useful options.
      (1) If desired, enable 'Auto Start'. NOTE - Even if enabled, this can be bypassed.
      (2) Set the destination folder, either by browsing on the tree or by dragging a folder to the Destination input field or label. Right-clicking on a folder in Explorer will also work, if enabled. The destination folder path will also show in the Tree if that right-click option is enabled.
      (3) Then drag & drop source file or folder onto one of three five areas - Folder (Drive) Tree field, or COPY or MOVE buttons ... this now also includes the source input and label.
      NOTE - If the Folder (Drive) Tree field is used, then you will additionally need to click either the COPY or MOVE button, to have that job added to the Batch List ... but this avoids 'Auto Start' if it is enabled. Drag & dropping to the buttons instead, saves on clicking, but starts the first job etc immediately if 'Auto Start' is enabled.
      (4) If needed and ready, click the START button to run the first job and those that follow.
      More information is included in program and in the NOTES etc sections below.
         
      WARNING - Depending on the amount of content on your destination drive, and folder level depth, and the speed of your PC, display of the full path in the Folder (Drive) Tree can take a while to show ... if you have that (right-click) option enabled ... it isn't by default. I found this feature quite tricky to get right, and I'm still not 100% sure it is now full-proof.
      TeraCopy Cure v1.5.zip  (source is included)
      TeraCopy Cure v1.6.zip  (source is included)
      NOTES
      UPDATES INFORMATION
      OLDER DOWNLOADS
       
    • By Zedna
      #include <WinAPI.au3> $text = FileReadLastChars("C:\Program Files\AutoIt3\Include\Array.au3", 1024) MsgBox(0, 'FileReadLastChars', $text) Func FileReadLastChars($sFile, $nChars)     Local $nBytes     $tBuffer = DLLStructCreate("char["&$nChars&"]")     $hFile = _WinAPI_CreateFile($sFile, 2, 2) ; open for read     _WinAPI_SetFilePointer($hFile, -1 * $nChars, 2) ; from end     _WinAPI_ReadFile($hFile, DLLStructGetPtr($tBuffer), $nChars, $nBytes)     _WinAPI_CloseHandle($hFile)     Return DLLStructGetData($tBuffer, 1) EndFunc ; included as standard UDF since AutoIt 3.2.13.6 version Func _WinAPI_SetFilePointer($hFile, $iPos, $iMethod = 0)     $aResult = DllCall( "kernel32.dll", "long", "SetFilePointer", "hwnd", $hFile, "long", $iPos, "long_ptr", 0, "long", $iMethod)     If @error Then Return SetError(1, 0, -1)     If $aResult[0] = -1 Then Return SetError(2, 0, -1) ; $INVALID_SET_FILE_POINTER = -1     Return $aResult[0] EndFunc ;==>_WinAPI_SetFilePointer Here is my topic about _WinAPI_SetFilePointer()
       
      EDIT: simpler version compatible with latest AutoIt
      $text = FileReadLastChars("C:\Program Files\AutoIt3\Include\Array.au3", 1024) MsgBox(0, 'FileReadLastChars', $text) Func FileReadLastChars($sFile , $nChars) $hFile = FileOpen($sFile, 0) ; open for read FileSetPos($hFile, -1 * $nChars, 2) ; from end $sRet = FileRead($hFile) FileClose($hFile) Return $sRet EndFunc  
×
×
  • Create New...