Jump to content
Sign in to follow this  
Sn3akyP3t3

Keepass AutoType Send to GUICtrlCreateEdit

Recommended Posts

I've been unsuccessful in being able to send Keepass AutoType strings over to a GUICtrlCreateEdit field.  I'm not adding any optional settings so maybe that is why, but I don't know which one(s) I should add if they are necessary.

#include <ButtonConstants.au3>
#include <EditConstants.au3>
#include <GUIConstantsEx.au3>
#include <WindowsConstants.au3>

$sInputText = ""
#Region ### START Koda GUI section ### Form=
$FormSendText = GUICreate("Text To Window", 634, 353, 192, 124)
$EditString = GUICtrlCreateEdit("", 8, 24, 601, 273)
GUICtrlSetData(-1, "")
$ButtonSend = GUICtrlCreateButton("Send Now", 264, 312, 75, 25, $WS_GROUP)
GUISetState(@SW_SHOW)
#EndRegion ### END Koda GUI section ###

While 1
    $nMsg = GUIGetMsg()
    Switch $nMsg
        Case $ButtonSend
            $sInputText = GUICtrlRead($EditString)
            SendTextToWindow($sInputText)
        Case $GUI_EVENT_CLOSE
            Exit
    EndSwitch
WEnd

; The SendTextToWindow() function is not included since it is beyond the scope of the question.

Keepass Autotype sets focus to the target window, but the GUICtrlCreateEdit field doesn't appear to accept it.

Share this post


Link to post
Share on other sites

I use KeePass, and in my experience its AutoType feature doesn't set focus itself to anything. One has to manually put the cursor where one wants AutoType to autotype, unless of course it's already where you want it.

If I run this bit of your modified code, then invoke AutoType, Keepass will autotype whatever entry it's on.

#Region ### START Koda GUI section ###
$FormSendText = GUICreate("Text To Window", 634, 353, 192, 124)
$EditString = GUICtrlCreateEdit("", 8, 24, 601, 273)
GUISetState(@SW_SHOW)
#EndRegion ### END Koda GUI section ###

While 1
Sleep(100)
WEnd

- Bruce /*somdcomputerguy */  If you change the way you look at things, the things you look at change.

Share this post


Link to post
Share on other sites

I've seen some KeePass related scripts on the forum. One is KeeForm to send data to websites. Maybe you can find something that fits your needs.


My UDFs and Tutorials:

Spoiler

UDFs:
Active Directory (NEW 2020-03-26 - Version 1.5.0.0) - Download - General Help & Support - Example Scripts - Wiki
OutlookEX (NEW 2020-03-21 - Version 1.5.0.0) - Download - General Help & Support - Example Scripts - Wiki
Outlook Tools (2019-07-22 - Version 0.6.0.0) - Download - General Help & Support - Wiki
ExcelChart (2017-07-21 - Version 0.4.0.1) - Download - General Help & Support - Example Scripts
PowerPoint (2017-06-06 - Version 0.0.5.0) - Download - General Help & Support
Excel - Example Scripts - Wiki
Word - Wiki
Task Scheduler (2019-12-03 - Version 1.5.1.0) - Download - General Help & Support - Wiki

Tutorials:
ADO - Wiki, WebDriver - Wiki

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Similar Content

    • By Skysnake
      I am attempting to draw multiple edit controls partially overlapping, creating the appearance of a single huge label.
      This is for a read only report.  Unfortunately, each box comes with its own quaint little black edge.
      How do I remove this black edge?
      https://www.autoitscript.com/autoit3/docs/appendix/GUIStyles.htm#Edit

       
    • By Jibberish
      I am working on a Video Player Test Script. I am reading a text file into a 3d array to be displayed in a GUI.
      Array Content:
      [x][0]FileName.mp4
      [x][1]UsageCount -> Up to a 4 digit number
      [x][2]EnableUsageCount (True/False)
      In the GUI the user can check the filename box, edit the number of usages and check EnableUsageCount to turn on the UsageCount control using the UsageCount number for the maximum number of plays.
      To make this easier to deal with I have removed the EnableUsageCount section, and am just concentrating on getting a method to put the edited (or unchanged) UsageCount in the array. Currently nothing is read into the array, due to my using the wrong method in the Case statement.
      Here are code snippets of what I am trying to do:
      ; Snippets from script ; I read the text file at the bottom and put the .mp4 filenames in $aManifest[x][0] and UsageCount in $aManifest[x][1] ; Then I create a GUI to display the .mp4 filenames with checkboxes and the UsageCount to the right. UsageCount is editable by the user. ; If the filename is checked, I want to read the filename into $aCheckedVideos[x][0] and the updated UsageCount in $aCheckedVideos[x][1] ; The GUICtrlRead($aVideoName[$i]) with Case $GUI_CHECKED & UNCHECKED works for the checkboxes ; This section puts the filenames in the GUI with a checkbox For $i = 0 to $iMMCount Step 1 $sMP4Text = $aManifest[$i][0] $iMP4Length = StringLen($sMP4Text) $aVideoName[$i] = GUICtrlCreateCheckbox($sMP4Text,$iLeft, $iTop) $iTop += 30 Next ; This section reads numbers from the Manifest array, and I want to be able to change the number and have them saved. ; So the Case $GUI_CHECKED & UNCHECKED won't work here, and I can't figure out what I should be doing here. For $i = 0 to $iMMCount Step 1 $sUsageText = $aManifest[$i][1] $aUsageCount[$i] = GUICtrlCreateInput($sUsageText,$iLeft, $iTop, 50,18, $GUI_DOCKAUTO) GUICtrlSetPos($aUsageCount[$i],200) $iTop += 30 Next While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE Exit Case $idCloseGUI For $i = 0 To $iMMNewCount Step 1 Switch GUICtrlRead($aVideoName[$i]) Case $GUI_CHECKED $aCheckedVideos[$i][0] = $aManifest[$i][0] ; If checked, I put the results into a two D array Case $GUI_UNCHECKED ; where Video Name is $aCheckedVideos[x][0] EndSwitch Switch GUICtrlRead($aUsageCounter[$i]) Case $GUI_CHECKED $aCheckedVideos[$i][1] = $aUsageCount[$i] ;I want to put the text (numbers) in $aCheckedVideos[x][1] Case $GUI_UNCHECKED ;but what is returned is blank, probably due to EndSwitch ; $GUI_CHECKED being the wrong thing. Next ExitLoop EndSwitch WEnd ;The txt file I'm reading has the following: ;~ /** Title #1: Big Buck Bunny 1080p **/ ;~ "Name": "Big Buck Bunny", ;~ "URI": "..\\MediaFiles\\bbb_1080_60s.mp4", ;~ "UsageCount": 9999, ;~ "URI": "..\\MediaFiles\\bbb_1080_60s_enc1.mp4", ;~ "UsageCount": 45, ;~ "URI": "..\\MediaFiles\\bbb_1080_60s_enc1.mp4", ;~ "UsageCount": 2, ;~ /** Title #2: Tears of Steel 4K **/ ;~ "Name": "Tears of Steel 4K", ;~ "URI": "..\\MediaFiles\\tos_4K_60s_HEVC.mp4", ;~ "UsageCount": 9876, ;~ "URI": "..\\MediaFiles\\tos_4K_60s_HEVC_enc2.mp4", ;~ "UsageCount": 0, ;~ "URI": "..\\MediaFiles\\tos_4K_60s_HEVC_enc2.mp4", ;~ "UsageCount": 5, I am certain that the section
                          Switch GUICtrlRead($aUsageCounter[$i])
                              Case $GUI_CHECKED
                                  $aCheckedVideos[$i][1] = $aUsageCount[$i]    ;I want to put the text (numbers) in $aCheckedVideos[x][1]
                              Case $GUI_UNCHECKED                                ;but what is returned is blank, probably due to
                          EndSwitch                                            ; $GUI_CHECKED being the wrong thing.

      is wrong, and this is what I am looking for help with. Instead of $GUI_CHECKED what should I be looking for?
      The worst part of this is I had this working late last night, and then lost my changes and cannot for the life of me remember how I had this working.
      Help is truly appreciated!
      Jibberish
       
    • By rootx
      I hope someone explain me how to do that... well, if you run the command netstat -a inside cmd prompt he look nice( indented ) but if you try to show the output inside the GUICtrlCreateEdit he look without indentation... how can I  fix it? Thx
      $Pid = Run(@ComSpec & " /c " & "netstat -a",@ScriptDir,@SW_HIDE,$STDERR_CHILD + $STDOUT_CHILD) Dim $_StderrRead='', $_StdoutRead='', $_StdReadAll='' While ProcessExists ( $Pid ) $_StderrRead = StderrRead ( $Pid ) If Not @error And $_StderrRead <> '' Then GUICtrlSetData($Edit1, "Error: " & $_StderrRead & @Crlf ,1) EndIf $_StdoutRead = StdoutRead ( $Pid ) If Not @error And $_StdoutRead <> '' Then GUICtrlSetData($Edit1, "Log: " & $_StdoutRead & @Crlf ,1) EndIf Wend  
    • By rootx
      How can I write a good output inside Edit control?
       4 example on notepad (windows) he looks terrible... but he looks perfect on notepad++ and cmd. THX
      GUICtrlSetData($Edit1, "Log: " & $_StdoutRead & @Crlf ,1) the log..
      <snip>
    • By kashamalasha
      Hello.
      Could you help me find the answer for my issue. I'm trying to set fomatted data wich is selected from SQL to GUICtrlCreateEdit field.
      And the GUICtrlSetData function is inserting it in one line. But when I'm trying to do the same using MsgBox the data looks fine.
      I'm trying to not use _GUICtrlRichEdit UDF.
      Thanks in advance. Here is my test code.
      #include <GUIConstants.au3> #include <GUIListBox.au3> #include <SQLite.au3> #include <SQLite.dll.au3> Opt("GUIOnEventMode", 1) $hMainGUI = GUICreate("Test", 520, 240) $hListBox = _GUICtrlListBox_Create($hMainGUI, "", 10, 10, 180, 80) $hEdit = GUICtrlCreateEdit("", 10, 80, 500, 150) GUISetState(@SW_SHOW, $hMainGUI) GUIRegisterMsg($WM_COMMAND, "_WM_COMMAND") Local $hQuery, $aRow _SQLite_Startup() $hDB = _SQLite_Open('MyDB.sqlite') _SQLite_Query(-1, "SELECT ID ||"". "" || Name FROM Templates ORDER BY ID;", $hQuery) While _SQLite_FetchData($hQuery, $aRow) = $SQLITE_OK _GUICtrlListBox_AddString($hListBox, $aRow[0]) WEnd GUISetOnEvent($GUI_EVENT_CLOSE, "CLOSE_Button") While 1 Sleep(100) WEnd Func _WM_COMMAND($hWnd, $iMsg, $wParam, $lParam) Local $hWndFrom, $iIDFrom, $iCode, $hWndListBox If Not IsHWnd($hListBox) Then $hWndListBox = GUICtrlGetHandle($hListBox) $hWndFrom = $lParam $iIDFrom = BitAND($wParam, 0xFFFF) ; Low Word $iCode = BitShift($wParam, 16) ; Hi Word Switch $hWndFrom Case $hListBox, $hWndListBox Switch $iCode Case $LBN_DBLCLK Select_Template(_GUICtrlListBox_GetCurSel($hListBox) + 1) Return 0 EndSwitch EndSwitch EndFunc ;==>_WM_COMMAND Func CLOSE_Button() _SQLite_Close() _SQLite_Shutdown() Exit EndFunc ;==>CLOSE_Button Func Select_Template($sListItem) _SQLite_QuerySingleRow($hDB, _ "SELECT Content " & _ "FROM Templates " & _ "WHERE ID = " & $sListItem & ";", $aRow) ;~ MsgBox(64, "Test: " & $sListItem, $aRow[0]) GUICtrlSetData($hEdit, $aRow[0]) WinSetTitle($hMainGUI, "", "Test: " & $sListItem) EndFunc ;==>Select_Template  


×
×
  • Create New...