Jump to content

XSkin_Fully_Loaded error: missing separator


Go to solution Solved by BrewManNH,

Recommended Posts

I just dnloaded the new version 03:39:08 unziped Xskin and went to make some buttons and message boxes, and was very supprised by all the errors I got,

>Running AU3Check (3.3.12.0)  from:C:\Program Files\AutoIt3  input:C:\Program Files\AutoIt3\XSkin\XSkin_Fully_Loaded\Examples\GUI_MessageBox.au3
"C:\Program Files\AutoIt3\Include\XSkin.au3"(144,58) : error: missing separator character before keyword.
                If IsArray($XS_msg) And $XS_msg[4] == $CtrlIDA[$XS_x]Then
                ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"C:\Program Files\AutoIt3\Include\XSkin.au3"(164,38) : error: missing separator character before keyword.
                    If $XSkinID[$XS_s] == $XS_msg[4]Then
                    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"C:\Program Files\AutoIt3\Include\XSkin.au3"(168,40) : error: missing separator character before keyword.
                            If $XS_msg[4] <> $XSkinID[$XS_s]Then
                            ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"C:\Program Files\AutoIt3\Include\XSkin.au3"(324,58) : error: missing separator character before keyword.
            If IsArray($XS_msg) And $XS_msg[4] == $CtrlIDMA[$XS_x]Then
            ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"C:\Program Files\AutoIt3\Include\XSkin.au3"(376,15) : error: missing separator character before keyword.
    If $XS_ret[0]Then
    ~~~~~~~~~~~~~^
"C:\Program Files\AutoIt3\XSkin\XSkin_Fully_Loaded\Examples\GUI_MessageBox.au3"(17,11) : error: Statement cannot be just an expression.
    XSkin MsgBox
~~~~~~~~~~^
"C:\Program Files\AutoIt3\XSkin\XSkin_Fully_Loaded\Examples\GUI_MessageBox.au3"(17,46) : error: MsgBox() [built-in] called with wrong number of args.
    XSkin MsgBox( "Ok Cancel Dialog", "Hello")
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"C:\Program Files\AutoIt3\XSkin\XSkin_Fully_Loaded\Examples\GUI_MessageBox.au3"(17,11) : error: XSkin(): undefined function.
    XSkin MsgBox
~~~~~~~~~~^
C:\Program Files\AutoIt3\XSkin\XSkin_Fully_Loaded\Examples\GUI_MessageBox.au3 - 8 error(s), 0 warning(s)
!>03:39:08 AU3Check ended. Press F4 to jump to next error.rc:2
+>03:39:08 AutoIt3Wrapper Finished.
>Exit code: 2    Time: 0.3946

I do not know where to start to get XSkin to work and play with this version of AutoIt. Or is there another tool I should be using?

Link to post
Share on other sites
  • Solution

Run Tidy on the source script for Xskin.au3. It appears to be missing several  spaces that are needed.

If I posted any code, assume that code was written using the latest release version unless stated otherwise. Also, if it doesn't work on XP I can't help with that because I don't have access to XP, and I'm not going to.
Give a programmer the correct code and he can do his work for a day. Teach a programmer to debug and he can do his work for a lifetime - by Chirag Gude
How to ask questions the smart way!

I hereby grant any person the right to use any code I post, that I am the original author of, on the autoitscript.com forums, unless I've specifically stated otherwise in the code or the thread post. If you do use my code all I ask, as a courtesy, is to make note of where you got it from.

Back up and restore Windows user files _Array.au3 - Modified array functions that include support for 2D arrays.  -  ColorChooser - An add-on for SciTE that pops up a color dialog so you can select and paste a color code into a script.  -  Customizable Splashscreen GUI w/Progress Bar - Create a custom "splash screen" GUI with a progress bar and custom label.  -  _FileGetProperty - Retrieve the properties of a file  -  SciTE Toolbar - A toolbar demo for use with the SciTE editor  -  GUIRegisterMsg demo - Demo script to show how to use the Windows messages to interact with controls and your GUI.  -   Latin Square password generator

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By ashraful089
      #include <ButtonConstants.au3>
      #include <ComboConstants.au3>
      #include <GUIConstantsEx.au3>
      #include <WindowsConstants.au3>
      #Region ### START Koda GUI section ### Form=C:\Users\Engr. Ashraful\Videos\koda_1.7.3.0\Forms\ProgramPlayer\FormProgamToOpen.kxf
      $FormInput = GUICreate("Input", 302, 205, 454, 285)
      $Resolution = GUICtrlCreateCombo("Resolution", 80, 24, 145, 25)
      GUICtrlSetData(-1, "1920|VM1920|1366")
      $ComboProgramType = GUICtrlCreateCombo("Program Type Selection", 80, 64, 145, 25, BitOR($CBS_DROPDOWN,$CBS_AUTOHSCROLL))
      GUICtrlSetData(-1, "Multimedia|Official|Design|Web")
      $ButtonEnter = GUICtrlCreateButton("Enter", 104, 104, 75, 25)
      GUISetState(@SW_SHOW)
      #EndRegion ### END Koda GUI section ###
      While 1
          $nMsg = GUIGetMsg()
          Switch $nMsg
              Case $GUI_EVENT_CLOSE
                  Exit
          EndSwitch
      WEnd
       
      please help me to read combo box input and use the value for another function/ work
       
    • By Aapjuh
      Hi,
      I am having a problem properly saving the Width of a resizable Gui.
      When a user resizes the Gui it gets saved in an ini when the Gui closes to then restore the new Width upon reopening the app.
      with GUICreate("myGui",300,200,Default,Default,$WS_SIZEBOX)
      WinGetPos($hGUI) returns 314, and WinGetClientSize($hGUI) returns 298
      when its then saved in the ini the gui keeps expanding or shrinking every time its opened by +14 or -2
      I figure it has to do with borders etc, but i also guess borders depend on the window theme and whatnot or is user specific, so i can't just do $GuiWidth = $GetGuiWidth[arr] -14 or +2 right?

      is there a proper way of doing this?
      Thanks in advance,
      Aapjuh
    • By It_is_me_Me
      I have provided a portion of my script (seen below) and I wanted to use what the USER will input into my IP address box and input box for TCP port. I set the IP address to use 0.0.0.0 as default and the Port to 502. But I want to let the user change it and when they click the buttons (IP Address and Port), the tooltip will show what the USER entered. How can I use the details that the User will input into my input box and IP address box and let them see what they entered when they click the buttons?
       
      Here are the scripts:
      ;-------------------------------------------------------------
      #include <ButtonConstants.au3>
      #include <ComboConstants.au3>
      #include <EditConstants.au3>
      #include <GUIConstantsEx.au3>
      #include <GuiIPAddress.au3>
      #include <StaticConstants.au3>
      #include <WindowsConstants.au3>
      #include <GuiEdit.au3>
      #include <MsgBoxConstants.au3>
      #include <Date.au3>
      #include <TabConstants.au3>
      #include <GuiTab.au3>

      Global $Form1 = GUICreate("Security Automation", 490, 339, -1, -1)
      ;MAIN Tab
      Global $TAB = GUICtrlCreateTab(0, 0, 489, 337)
      Global $tab_main = GUICtrlCreateTabItem("Main")
      $label_Title = GUICtrlCreateLabel("ETP-073 Security", 12, 33, 103, 17)
      GUICtrlSetFont(-1, 8, 800, 0, "MS Sans Serif")
      ;-----------------TCP User input information-------------------------------------------------------------------------------
      $groupBox_TCP = GUICtrlCreateGroup("TCP", 12, 49, 289, 57, BitOR($GUI_SS_DEFAULT_GROUP,$BS_FLAT))
      ;TCP IP address
      Global $IPAddress1 = _GUICtrlIpAddress_Create($Form1, 20, 81, 170, 21)
      $Label_ipAddress = GUICtrlCreateLabel("Host IP Address", 20, 65, 80, 17)
      $userInputIP = _GUICtrlIpAddress_Set($IPAddress1, "0.0.0.0")
      ;TCP Port
      $label_tcpPort = GUICtrlCreateLabel("Port", 196, 65, 23, 17)
      Global $input_tcpPort = GUICtrlCreateInput("502", 196, 81, 57, 21, BitOR($GUI_SS_DEFAULT_INPUT,$ES_CENTER))
      $userPort = GUICtrlRead($input_tcpPort)
      ;TCP Address
      $label_tcpAddress = GUICtrlCreateLabel("Addr.", 260, 65, 29, 17)
      Global $input_tcpDevAddress = GUICtrlCreateInput("1", 260, 81, 33, 21, BitOR($GUI_SS_DEFAULT_INPUT,$ES_CENTER))
      ;Buttons
      Global $btn_userIP = GUICtrlCreateButton("User IP", 308, 297, 81, 25)
      Global $btn_Port = GUICtrlCreateButton("Port", 404, 297, 75, 25)
      ;Showing the GUI
      GUISetState(@SW_SHOW)
      While 1
         $nMsg = GUIGetMsg()
         Switch $nMsg
            Case $GUI_EVENT_CLOSE
               Exit
            Case $btn_userIP
               ToolTip($userInputIP)
            Case $btn_Port
               ToolTip($userPort)
         EndSwitch
      WEnd
      ;--------------end of script ------------------
       
      Note: There will be a "!->Includefile <WMDebug.au3> not found." Pay no attention to it.
    • By CYBRIX
      So I am a person who has learned programming off the internet, without structured courses, and I'm trying to create a UI element that can be used like "GUICtrlCreate...".

      I'd like to get some kind of insight on how to improve the code of a Graph element that I have created.
      I am unfamiliar on the standards for creating such UI elements, and assume I'll get some valuable insight here.
       
      Here's some sample code: (I tried to make it look a bit less upsetting to those who know better, but be warned: not pretty.)
      #include <WinAPISys.au3> #include <WinAPI.au3> #include <WinAPIGdi.au3> #include <Array.au3> #include <WindowsConstants.au3> #include <GUIConstants.au3> Local $hWnd = GUICreate("Test", 200, 200) GUISetState(@SW_SHOW, $hWnd) Local $hGraph = _GraphStartUp($hWnd, 10, 30, 180, 180) Local $nData, $nDataMax = 1000, $hDataTimer = TimerInit() While GUIGetMsg() <> $GUI_EVENT_ClOSE If TimerDiff($hDataTimer) >= 150 Then $nData = Random(0, $nDataMax) _UpdateGraph($nData) $hDataTimer = TimerInit() EndIf Sleep(20) WEnd _GraphShutDown($hWnd, $hGraph) Exit Func _GraphStartUp($hWnd, $x, $y, $w, $h, $nUpdateTimes = 1000, $nResolution = 60) Global $hBluePen = _WinAPI_CreatePen($PS_SOLID, 2, _WinAPI_RGB(220, 0, 0)) Global $hGreyPen = _WinAPI_CreatePen($PS_DASH, 1, _WinAPI_RGB(100, 100, 100)) Global $hBlackPen = _WinAPI_CreatePen($PS_SOLID, 1, _WinAPI_RGB(0, 0, 0)) Global $hWhitePen = _WinAPI_CreatePen($PS_SOLID, 1, _WinAPI_RGB(255, 255, 255)) Global $nGraphRes = $nResolution Global $aGraphData[$nGraphRes + 1] For $i = 2 To $nGraphRes $aGraphData[$i] = 0 Next Global $hWinDC = _WinAPI_GetWindowDC($hWnd) Global $nGraphX = $x Global $nGraphY = $y Global $nGraphWidth = $w Global $nGraphHeight = $h Global $nGraphXUnit = $nGraphWidth / ($nGraphRes - 1) Global $nGraphBottomY = $nGraphY + $nGraphHeight Global $nGraphMaxX = $nGraphX + $nGraphWidth Global $aUpdateArea[4][2] = [[$nGraphX - 1, $nGraphY - 1], [$nGraphX - 1, $nGraphBottomY + 1], [$nGraphMaxX + 1, $nGraphBottomY + 1], [$nGraphMaxX + 1, $nGraphY - 1]] Global $pUpdateAreaRgn = _WinAPI_CreatePolygonRgn($aUpdateArea) Global $pTextRect = _WinAPI_CreateRectEx($nGraphX + 1, $nGraphY + 1, $nGraphWidth / 2, $nGraphHeight / 4) Global $nGreatestValue = 1 GLobal $pGraphArea = _WinAPI_CreateRectEx($nGraphX - 7, $nGraphY - 26, $nGraphWidth + 14, $nGraphHeight + 2) Global $pDrawCall = DllCallbackRegister('_DrawGraph', 'none', '') Global $pGraphTimer = _WinAPI_SetTimer($hWnd, 567891234, $nUpdateTimes, DllCallbackGetPtr($pDrawCall)) _DrawGraph() Return $pGraphTimer EndFunc Func _DrawGraph() Global $hPen $nGreatestValue = _ArrayMax($aGraphData, 1, 1) $hPen = _WinAPI_SelectObject($hWinDC, $hWhitePen) _WinAPI_PaintRgn($hWinDC, $pUpdateAreaRgn) $hPen = _WinAPI_SelectObject($hWinDC, $hGreyPen) _WinAPI_DrawLine($hWinDC, $nGraphX, $nGraphY, $nGraphMaxX, $nGraphY) _WinAPI_DrawLine($hWinDC, $nGraphX, $nGraphY + ($nGraphHeight / 2), $nGraphMaxX, $nGraphY + ($nGraphHeight / 2)) _WinAPI_DrawLine($hWinDC, $nGraphMaxX, $nGraphY, $nGraphMaxX, $nGraphBottomY) $hPen = _WinAPI_SelectObject($hWinDC, $hBluePen) For $i = 1 To $nGraphRes - 1 _WinAPI_DrawLine($hWinDC, $nGraphX + (($i - 1) * $nGraphXUnit), $nGraphBottomY - ($aGraphData[$i] / $nGreatestValue * $nGraphHeight), $nGraphX + ($i * $nGraphXUnit), $nGraphBottomY - ($aGraphData[$i + 1] / $nGreatestValue * $nGraphHeight)) Next $hPen = _WinAPI_SelectObject($hWinDC, $hBlackPen) _WinAPI_DrawLine($hWinDC, $nGraphX, $nGraphBottomY, $nGraphMaxX, $nGraphBottomY) _WinAPI_DrawLine($hWinDC, $nGraphX, $nGraphY, $nGraphX, $nGraphBottomY) _WinAPI_DrawText($hWinDC, Round($aGraphData[$nGraphRes], 2), $pTextRect, $DT_LEFT) EndFunc Func _UpdateGraph($nData) _ArrayAdd($aGraphData, $nData) _ArrayDelete($aGraphData, 1) EndFunc Func _GraphShutDown($hWnd, $pGraphTimer) _WinAPI_SelectObject($hWinDC, $hPen) _WinAPI_DeleteObject($hBlackPen) _WinAPI_DeleteObject($hGreyPen) _WinAPI_DeleteObject($hBluePen) _WinAPI_DeleteObject($hWhitePen) _WinAPI_ReleaseDC($hWnd, $hWinDC) _WinAPI_KillTimer($hWnd, $pGraphTimer) DllCallbackFree($pDrawCall) _WinAPI_RedrawWindow($hWnd, $pGraphArea) EndFunc  
    • By mLipok
      I check this snippet:
      https://www.autoitscript.com/wiki/Snippets_(_GUI_)#GUI_With_Scrollable_TabItem
      Modified them and I refactored. That's because I needed to adapt it to my needs (I'll write later).
      I thought I understood how it works.
      But I was wrong.
       
      This is my example which is showing what I want to achieve.
      #include <AutoItConstants.au3> #include <ButtonConstants.au3> #include <GUIConstantsEx.au3> #include <GuiScrollBars.au3> #include <GUIScrollbars_Ex.au3> #include <StringConstants.au3> #include <StructureConstants.au3> #include <WindowsConstants.au3> GUIRegisterMsg($WM_VSCROLL, WM_VSCROLL) _Example() Func _Example() Local $i_Count = 30 Local $a_Options_List[$i_Count + 1] $a_Options_List[0] = $i_Count For $i = 1 To $i_Count $a_Options_List[$i] = 'Test #' & $i Next ConsoleWrite("- " & _my_gui_Wybierz('Testing', $a_Options_List) & @CRLF) EndFunc ;==>_Example Func _my_gui_Wybierz($s_Description, $a_Options_List = "", $i_Left = Default, $i_Top = Default, $i_Width = Default, $hWnd_Parent = 0) ;~ WinSetOnTop($ACROBAT_TITLE, "", $WINDOWS_NOONTOP ) If $i_Left = Default Then $i_Left = -1 If $i_Top = Default Then $i_Top = -1 If $i_Width = Default Then $i_Width = 400 #Region _my_gui_Wybierz - GUI Creation Local $i_Height = 600 Local $hWND_DateForm = GUICreate("", $i_Width, $i_Height, $i_Left, $i_Top, BitOR(0, $WS_SIZEBOX), -1, $hWnd_Parent) WinSetOnTop($hWND_DateForm, "", $WINDOWS_ONTOP) Local $hChild = GUICreate("Scroll area", $i_Width - 15, $i_Height - 40, 0, 0, $WS_POPUP, $WS_EX_MDICHILD, $hWND_DateForm) _GUIScrollBars_Init($hChild, -1) _GUIScrollBars_ShowScrollBar($hChild, $SB_HORZ, False) _GUIScrollBars_ShowScrollBar($hChild, $SB_VERT, True) ;~ _GUIScrollBars_SetScrollRange($hChild, $SB_VERT, 3, 30) GUICtrlCreateLabel("", 10, 7, $i_Width - 45, 80) Local $id_Label1 = GUICtrlCreateLabel("", 10, 7 + 5, $i_Width - 45, 80 - 5) GUICtrlSetBkColor(-1, 0x88AABB) Local $a_List_of_Button_ID[$a_Options_List[0] + 1] For $IDX_Item = 1 To $a_Options_List[0] If $IDX_Item > 0 And $IDX_Item < 10 Then $a_List_of_Button_ID[$IDX_Item] = GUICtrlCreateButton( _ $IDX_Item & ". " & $a_Options_List[$IDX_Item], _ 10, 90 + ($IDX_Item - 1) * 21, $i_Width - 45, 20, BitOR($BS_LEFT, $WS_GROUP)) Else $a_List_of_Button_ID[$IDX_Item] = GUICtrlCreateButton( _ Chr(Asc('A') + $IDX_Item - 10) & ". " & $a_Options_List[$IDX_Item], _ 10, 90 + ($IDX_Item - 1) * 21, $i_Width - 45, 20, BitOR($BS_LEFT, $WS_GROUP)) EndIf Next Local $temp_var = $a_Options_List[0] Local $a_accelerators[($temp_var * 2) + 1][2] Local $i_Accelerators_Counter = 0 Local $i_Accelerator_Char1 = '' Local $i_Accelerator_Char2 = '' For $IDX_Item = 1 To $a_Options_List[0] If $IDX_Item > 9 Then $i_Accelerator_Char1 = Chr(Asc('A') + $IDX_Item - 10) $i_Accelerator_Char2 = Chr(Asc('a') + $IDX_Item - 10) Else $i_Accelerator_Char1 = "{NUMPAD" & $IDX_Item & "}" ;Chr(48 + $IDX_Item) $i_Accelerator_Char2 = $IDX_Item EndIf $a_accelerators[($IDX_Item * 2) - 1][0] = $i_Accelerator_Char1 $a_accelerators[($IDX_Item * 2) - 1][1] = $a_List_of_Button_ID[$IDX_Item] $a_accelerators[($IDX_Item * 2) - 1 + 1][0] = $i_Accelerator_Char2 $a_accelerators[($IDX_Item * 2) - 1 + 1][1] = $a_List_of_Button_ID[$IDX_Item] $i_Accelerators_Counter += 2 Next $a_accelerators[0][0] = $i_Accelerators_Counter GUISetAccelerators($a_accelerators, $hChild) GUICtrlSetData($id_Label1, $s_Description) GUISetState(@SW_SHOW, $hWND_DateForm) GUISetState(@SW_SHOW, $hChild) #EndRegion _my_gui_Wybierz - GUI Creation #Region - _my_gui_Wybierz - Handling messages Local $i_Selected_item = 0 Local $v_Return_Value = "" Local $a_GUI_Messages While 1 $a_GUI_Messages = GUIGetMsg($GUI_EVENT_ARRAY) If $a_GUI_Messages[0] = $GUI_EVENT_NONE Then ; do nothing ElseIf $a_GUI_Messages[1] = $hWND_DateForm Then If $a_GUI_Messages[0] = $GUI_EVENT_CLOSE Then ExitLoop ElseIf $a_GUI_Messages[1] <> $hChild Then ; .... Else For $IDX_Check = 1 To $a_Options_List[0] If $a_List_of_Button_ID[$IDX_Check] = $a_GUI_Messages[0] Then $v_Return_Value = GUICtrlRead($a_List_of_Button_ID[$IDX_Check]) $i_Selected_item = $IDX_Check $v_Return_Value = _RegExpFirstMatch($v_Return_Value, '.+?\. (.+)') ExitLoop 2 ; exit from ForNext and also from WhileWend EndIf Next EndIf WEnd #EndRegion - _my_gui_Wybierz - Handling messages GUIDelete($hChild) GUIDelete($hWND_DateForm) Return SetError(0, $i_Selected_item, $v_Return_Value) EndFunc ;==>_my_gui_Wybierz Func WM_VSCROLL($hWnd, $msg, $wParam, $lParam) #forceref $msg, $wParam, $lParam Local $nScrollCode = BitAND($wParam, 0x0000FFFF) Local $index = -1, $yChar, $yPos Local $Min, $Max, $Page, $Pos, $TrackPos For $x = 0 To UBound($aSB_WindowInfo) - 1 If $aSB_WindowInfo[$x][0] = $hWnd Then $index = $x $yChar = $aSB_WindowInfo[$index][3] ExitLoop EndIf Next If $index = -1 Then Return 0 ; Get all the vertial scroll bar information Local $tSCROLLINFO = _GUIScrollBars_GetScrollInfoEx($hWnd, $SB_VERT) $Min = DllStructGetData($tSCROLLINFO, "nMin") $Max = DllStructGetData($tSCROLLINFO, "nMax") $Page = DllStructGetData($tSCROLLINFO, "nPage") ; Save the position for comparison later on $yPos = DllStructGetData($tSCROLLINFO, "nPos") $Pos = $yPos $TrackPos = DllStructGetData($tSCROLLINFO, "nTrackPos") Switch $nScrollCode Case $SB_TOP ; user clicked the HOME keyboard key DllStructSetData($tSCROLLINFO, "nPos", $Min) Case $SB_BOTTOM ; user clicked the END keyboard key DllStructSetData($tSCROLLINFO, "nPos", $Max) Case $SB_LINEUP ; user clicked the top arrow DllStructSetData($tSCROLLINFO, "nPos", $Pos - 1) Case $SB_LINEDOWN ; user clicked the bottom arrow DllStructSetData($tSCROLLINFO, "nPos", $Pos + 1) Case $SB_PAGEUP ; user clicked the scroll bar shaft above the scroll box DllStructSetData($tSCROLLINFO, "nPos", $Pos - $Page) Case $SB_PAGEDOWN ; user clicked the scroll bar shaft below the scroll box DllStructSetData($tSCROLLINFO, "nPos", $Pos + $Page) Case $SB_THUMBTRACK ; user dragged the scroll box DllStructSetData($tSCROLLINFO, "nPos", $TrackPos) EndSwitch ; Set the position and then retrieve it. Due to adjustments ; by Windows it may not be the same as the value set. DllStructSetData($tSCROLLINFO, "fMask", $SIF_POS) _GUIScrollBars_SetScrollInfo($hWnd, $SB_VERT, $tSCROLLINFO) _GUIScrollBars_GetScrollInfo($hWnd, $SB_VERT, $tSCROLLINFO) ; If the position has changed, scroll the window and update it $Pos = DllStructGetData($tSCROLLINFO, "nPos") If ($Pos <> $yPos) Then _GUIScrollBars_ScrollWindow($hWnd, 0, $yChar * ($yPos - $Pos)) $yPos = $Pos EndIf Return $GUI_RUNDEFMSG EndFunc ;==>WM_VSCROLL Func _RegExpFirstMatch($s_Data, $s_Pattern) Local $a_Results = StringRegExp($s_Data, $s_Pattern, $STR_REGEXPARRAYGLOBALMATCH) If @error Then Return SetError(@error, @extended, '') Return SetError(0, UBound($a_Results), $a_Results[0]) EndFunc ;==>_RegExpFirstMatch  
      I have few problems with this code, and many question related to them.
      Question 1:
      How to make the Scrollbars to work ?
      I mean to scroll buttons.
      Question 2:
      Do I must to ues Child Window, or is it possible to scroll buttons without using Child Window ?
      Question 3:
      Why after uncommenting this following line:
      ;~ _GUIScrollBars_SetScrollRange($hChild, $SB_VERT, 3, 30) the ScrollBar disapears ?
×
×
  • Create New...