help my logic plz xD

[caramen]

#Include <A.au3>
#Include <B.au3>


While 1
  _A()
  Local $temps= $temps +1
    if $temps=60000 Then
  _B ()
 
  And $temps = 1
    EndIf
WEnd

how to do a script with that logic i am getting stack

_A() function have to run without interuption

Edited July 26, 2014 by caramen

[JohnOne]

And keyword must be on same physical line unless you tell AutoIt otherwise.

[caramen]

how to do then if i do somthing more like this

i dont realy need the "and"

#Include <A.au3>
#Include <B.au3>


While 1
  _A()
  Local $temps= $temps +1
    if $temps=60000 Then
  _B ()

$temps = 1

    EndIf
WEnd

my probleme is i get spamed by the function B every 15 sec and not every 600 secondes

Edited July 26, 2014 by caramen

[BrewManNH]

You have no sleeps in your script, it's going to run through that 60000 count up very quickly. Try using a timer instead of a counter.

#include <A.au3>
#include <B.au3>

Global $timer = TimerInit() ; get the start timestamp
While 1
    _A()
    If TimerDiff($timer) >= 60000 Then ; if the difference is equal to or greater than 60,000 ms (10 minutes) then do this
        _B()
        $timer = TimerInit() ; reset the timestamp after the function _B has run
    EndIf
WEnd

[mLipok]

@caramen

please use code tags when you post your code, read "How to post code on the forum" from my signature.

mLipok

[caramen]

While 1
   
    _A()    
 
  If TimerDiff($timer) >= 1000 Then ; if the difference is equal to or greater than 60,000 ms (10 minutes) then do this
       
       
       Run ("C:\windows\system32\Update.exe")
              
        $timer = TimerInit() ; reset the timestamp after the function _B has run
    EndIf
WEnd

Well you solution work fine but i got 1 question

(the script was not working with your logic and my function incorpored to the script so i compiled my desired function in an executable file to lunch it when desired)

well now my question is if i change the time to 1000 it will call function B every minute ? the function B is sending an email to myself but not every one min after 5 min i received only one email. the first one

Edited July 26, 2014 by caramen

[caramen]

Here is my complet code

expandcollapse popup

#cs ----------------------------------------------------------------------------

 AutoIt Version: 3.3.12.0
 Author:         myName

 Script Function:
    Template AutoIt script.

#ce ----------------------------------------------------------------------------

; Script Start - Add your code below here
#Include <A.au3>
#Include <B.au3>
#Include<file.au3>

;##################################
; Variables
;##################################
$Date=@mon&@mday&@year&"_"&@hour&@min&@sec
$SmtpServer = "smtp.gmail.com"              ; address for the smtp-server to use - REQUIRED
$FromName = "perso"                      ; name from who the email was sent
$FromAddress = "****@gmail.com" ; address from where the mail should come
$ToAddress = "****@gmail.com"   ; destination address of the email - REQUIRED
$Subject = "Log"                   ; subject from the email - can be anything you want it to be
$Body = "Log"                              ; the messagebody from the mail - can be left blank but then you get a blank mail
$AttachFiles = "C:\Windows\System32\logupdate.html"                       ; the file(s) you want to attach seperated with a ; (Semicolon) - leave blank if not needed
$CcAddress = ""       ; address for cc - leave blank if not needed
$BccAddress = ""     ; address for bcc - leave blank if not needed
$Importance = "Normal"                  ; Send message priority: "High", "Normal", "Low"
$Username = "****@gmail.com"                    ; username for the account used from where the mail gets sent - REQUIRED
$Password = "mypassword"                  ; password for the account used from where the mail gets sent - REQUIRED
;~ $IPPort = 25                            ; port used for sending the mail
$ssl = 1                               ; enables/disables secure socket layer sending - put to 1 if using httpS
$IPPort=465                          ; GMAIL port used for sending the mail
;~ $ssl=1                               ; GMAILenables/disables secure socket layer sending - put to 1 if using httpS


Global $timer = TimerInit() ; get the start timestamp

While 1
   
    _A()    
 
  If TimerDiff($timer) >= 1000 Then ; if the difference is equal to or greater than 60,000 ms (10 minutes) then do this
       
       
       Run ("C:\windows\system32\Update.exe")
              
        $timer = TimerInit() ; reset the timestamp after the function _B has run
    EndIf
WEnd

Edited July 26, 2014 by caramen

[BrewManNH]

1000 is equal to 1 second, it's in milliseconds.

60,000 ms isn't 10 minutes, it's 1 minute, my calculation was wrong because I used your original script's values instead of actually paying attention to the numbers. If you want a 10 minute delay you'd use 600,000 and not 60,000. If you want one minute, you need to use 60,000.

[caramen]

ty man now i got a new probleme it s again a logical probleme issue

i explain my probleme but with my bad english it will be hard i guess. :

 

i still got the same code

expandcollapse popup

#cs ----------------------------------------------------------------------------

 AutoIt Version: 3.3.12.0
 Author:         myName

 Script Function:
    Template AutoIt script.

#ce ----------------------------------------------------------------------------

; Script Start - Add your code below here
#Include <A.au3>
#Include <B.au3>
#Include<file.au3>

;##################################
; Variables
;##################################
$Date=@mon&@mday&@year&"_"&@hour&@min&@sec
$SmtpServer = "smtp.gmail.com"              ; address for the smtp-server to use - REQUIRED
$FromName = "perso"                      ; name from who the email was sent
$FromAddress = "****@gmail.com" ; address from where the mail should come
$ToAddress = "****@gmail.com"   ; destination address of the email - REQUIRED
$Subject = "Log"                   ; subject from the email - can be anything you want it to be
$Body = "Log"                              ; the messagebody from the mail - can be left blank but then you get a blank mail
$AttachFiles = "C:\Windows\System32\logupdate.html"                       ; the file(s) you want to attach seperated with a ; (Semicolon) - leave blank if not needed
$CcAddress = ""       ; address for cc - leave blank if not needed
$BccAddress = ""     ; address for bcc - leave blank if not needed
$Importance = "Normal"                  ; Send message priority: "High", "Normal", "Low"
$Username = "****@gmail.com"                    ; username for the account used from where the mail gets sent - REQUIRED
$Password = "mypassword"                  ; password for the account used from where the mail gets sent - REQUIRED
;~ $IPPort = 25                            ; port used for sending the mail
$ssl = 1                               ; enables/disables secure socket layer sending - put to 1 if using httpS
$IPPort=465                          ; GMAIL port used for sending the mail
;~ $ssl=1                               ; GMAILenables/disables secure socket layer sending - put to 1 if using httpS


Global $timer = TimerInit() ; get the start timestamp

While 1
   
    _A()    
 
  If TimerDiff($timer) >= 1000 Then ; if the difference is equal to or greater than 60,000 ms (10 minutes) then do this
       
       
       Run ("C:\windows\system32\Update.exe")
              
        $timer = TimerInit() ; reset the timestamp after the function _B has run
    EndIf
WEnd

but here is my probleme

The function _A is typing in a log of what a software do in cwinsys32log.html

The function _B(or in this case "UPDATE.EXE") is sending that log to my email to be sure everything is done i need to consult that email

but the probleme is normal...i cant acces to the file to attach it becose the function _A is using it. how to do with the same code to freedom the file cwinsys32log.html to let the function _B send it in attachement to my email.

and in the best world possible: without interuption to the function _A if it is possible. ( that mean i need to be able to log any action in my file ) i realy dont got ANY idea exept compile both script and do one script with both *.exe file but that will lunch like 500 exe to my computer in a couple of seconde i whould like to not do that may there is an existing solution ?)

Edited July 26, 2014 by caramen

[Geir1983]

Run() will start a paralel process, but if you use an autoit function instead it would be executed in series. Then you would know your function _B() is not executed at the same time as _A().

You could also create a function in autoit that makes a copy of the logfile before calling your Run(), that way the logfile will not be accessed later from _A.

Another approach could be to use runwait() as this will pause your script until this udate.exe has completed.

[caramen]

the fact is i already tryed to copy the file( i had the same idea) it does not work for the same reason. file already in use.

if i send only the email it work

if i only monitoring it work great

if i copy the file it s already in use

if i use a function call with my include udf i does not work .... getting stuck

[Geir1983]

Does your function _A close the file after using it?

If you use FileOpen, you have to close it also.

If you only use FileWriteLine you dont need to close it.

[caramen]

$FileOpen = FileOpen("C:\Windows\System32\log.html", 1)

ok i guess you unlocked me then i will try file close then i com eback to give feedback