Jump to content
  1. TheAutomator

    TheAutomator

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By nacerbaaziz
      it recomended to use the builten function
      _DateDiff
       
       
       
      hello autoit team
      i made a simple function to help me get the difference between to date
      i liked to share it with you
      the paramatrs of this function
      is firstdate and lastedate
      the two params is as the following
      year/month/day hours:minuts:seconds
      here is the function
       
      #include <date.au3> func _dateBetween($s_firstDate, $s_lastDate = default) if not (StringRegExp($s_firstDate, "((\d{4})\/(\d{2})\/(\d{2})\s(\d{2})\:(\d{2})\:(\d{2}))", 0) = 1) then Return SetError(1, 0, 0) if $s_lastDate = default then $s_lastDate = @year & "/" & @mon & "/" & @mday & " " & @hour & ":" & @min & ":" & @sec if not (StringRegExp($s_lastDate, "((\d{4})\/(\d{2})\/(\d{2})\s(\d{2})\:(\d{2})\:(\d{2}))", 0) = 1) then Return SetError(2, 0, 0) local $a_FirstSplitDate = StringSplit(StringRegExpReplace($s_firstDate, "((.*)\s(.*))", "$2"), "/", 2) local $a_FirstSplitTime = StringSplit(StringRegExpReplace($s_firstDate, "((.*)\s(.*))", "$3"), ":", 2) local $a_lastSplitDate = StringSplit(StringRegExpReplace($s_lastDate, "((.*)\s(.*))", "$2"), "/", 2) local $a_LastSplitTime = StringSplit(StringRegExpReplace($s_lastDate, "((.*)\s(.*))", "$3"), ":", 2) local $i_firstDateValue = _DateToDayValue($a_FirstSplitDate[0], $a_FirstSplitDate[1], $a_FirstSplitDate[2]) local $i_LastDateValue = _DateToDayValue($a_LastSplitDate[0], $a_LastSplitDate[1], $a_LastSplitDate[2]) if $i_firstDateValue > $i_LastDateValue then Return SetError(3, 0, 0) local $i_totalDays = $i_LastDateValue-$i_firstDateValue if not ($i_totalDays = 0) then if $a_FirstSplitTime[0] <= $a_lastSplitTime[0] then $i_totalDays += 1 $a_lastSplitTime[0] -= $a_FirstSplitTime[0] elseIf $a_FirstSplitTime[0] > $a_lastSplitTime[0] then if $i_totalDays > 0 then $i_totalDays -= 1 $a_FirstSplitTime[0] -= $a_lastSplitTime[0] endIf endIf endIf local $i_totalYears = 0 if $i_totalDays >= 365 then While $i_totalDays >= 365 $i_totalYears += 1 $i_totalDays -= 365 Wend endIf local $i_TotalMonths = 0 if $i_totalDays >= 30 then While $i_totalDays >= 30 $i_totalMonths += 1 $i_totalDays -= 30 Wend endIf local $i_totalWeeks = 0 if $i_totalDays >= 7 then While $i_totalDays >= 7 $i_totalWeeks += 1 $i_totalDays -= 7 Wend endIf $i_totalSeconds = ((($a_FirstSplitTime[0]*60)*60)+($a_FirstSplitTime[1]*60)+($a_FirstSplitTime[2]))-((($a_lastSplitTime[0]*60)*60)+($a_lastSplitTime[1]*60)+($a_LastSplitTime[2])) local $minus = "" if $i_totalSeconds < 0 then $minus = "-" $i_totalSeconds = StringReplace($i_totalSeconds, "-", "") endIf local $i_totalHours = 0 if $i_totalSeconds >= 3600 then While $i_totalSeconds >= 3600 $i_totalHours += 1 $i_totalSeconds -= 3600 Wend endIf local $i_totalminuts = 0 if $i_totalSeconds >= 60 then While $i_totalSeconds >= 60 $i_totalminuts += 1 $i_totalSeconds -= 60 Wend endIf local $a_arrayReturn[7] $a_arrayReturn[0] = $i_totalYears $a_arrayReturn[1] = $i_totalMonths $a_arrayReturn[2] = $i_totalWeeks $a_arrayReturn[3] = $i_totalDays $a_arrayReturn[4] = $minus & $i_totalHours $a_arrayReturn[5] = $minus & $i_totalminuts $a_arrayReturn[6] = $minus & $i_totalSeconds return $a_arrayReturn endFunc  
      here is an example
       
       
      $a_calc = _dateBetween("2015/02/12 23:00:05", "2030/02/12 23:25:50") msgBox(64, "result", StringFormat("the difference is : %i years and %i months and %i weeks and %i days and %i hours and %i minuts and %i seconds", $a_calc[0], $a_calc[1], $a_calc[2], $a_calc[3], $a_calc[4], $a_calc[5], $a_calc[6]))  
      am waiting for your comments
      with my greetings
    • By Simpel
      Hi,
      I wondered why negative integers I wrote into registry (e.g. negative x-coordinates of a gui if using two monitors and the right one is the main one) wouldn't return right when reading. Now I know: it is saved as an unsigned integer (without algebraic sign). So here is a snippet that is changing unsigned to signed integer:
      Global Const $g_sRegKey = "HKEY_CURRENT_USER\Software\" & @ScriptName ; path to registry RegWrite($g_sRegKey, "Value", "REG_DWORD", -2147483647) ; write some negative integer into registry; -2147483647 highest possible negative integer , 2147483648 highest possible positive integer if talking of 32bit Local $sValue = RegRead($g_sRegKey, "Value") ; read out registry ConsoleWrite("Value: " & $sValue & @CRLF) ; show real value in console Local $sResult = _SignedInteger($sValue) ; change to signed value ConsoleWrite("Result: " & $sResult & @CRLF) ; and show it in console Func _SignedInteger($iUnsignedInteger) Local $iSignedInteger If $iUnsignedInteger > (2^31) Then ; then it means a negative integer $iSignedInteger = $iUnsignedInteger - (2^32) Else $iSignedInteger = $iUnsignedInteger EndIf Return $iSignedInteger EndFunc It took me some time to find out the problem and so I hope I can help somebody with this.
      Regards, Conrad
    • By imitto
      Hello all!
      I use Autoit for a while, already made some automation for a TV station's master control room with it. I made a UDF to easily work with PAL timecode and time with milliseconds, convert, add or subtract them. Feel free to use it if you want something like this
      #Region ;**** Directives created by AutoIt3Wrapper_GUI **** #AutoIt3Wrapper_Res_Description=PAL Timecode Calculator UDF #AutoIt3Wrapper_Res_LegalCopyright=horvath.imre@gmail.com #EndRegion ;**** Directives created by AutoIt3Wrapper_GUI **** ; ; #FUNCTION# ; Name...........: _tcAdd ; Description....: Returns addition of two timecodes ; Syntax.........: _tcAdd($fTc1, fTc2 [, $fFormat = "P"]) ; ; Parameters.....: $fTc1 - First timecode in hh:mm:ss.ff format ; $fTc2 - Second timecode in hh:mm:ss.ff format ; $fFormat - Time base - "P" (default): PAL (25 fps) ; "M" : millisecond ; ; Return value...: Sum of the two timecode in the selected format Func _tcAdd($fTc1, $fTc2, $fFormat = "P", $fHourFormat = 1) Local $fMs1 = _tcToMs($fTc1) Local $fMs2 = _tcToMs($fTc2) Local $fSumMs = $fMs1 + $fMs2 Return _msToTc($fSumMs, $fFormat, $fHourFormat) EndFunc ; #FUNCTION# ; Name...........: _tcsSub ; Description....: Returns addition of two timecodes ; Syntax.........: _tcSub($fTc1, fTc2 [, $fFormat = "P"]) ; ; Parameters.....: $fTc1 - First timecode in hh:mm:ss.ff format ; $fTc2 - Second timecode in hh:mm:ss.ff format ; $fFormat - Time base - "P" (default): PAL (25 fps) ; "M" : millisecond ; ; Return value...: Subtract $fTc2 from $fTc1 in the source format Func _tcSub($fTc1, $fTc2, $fFormat = "P") Local $fMs1 = _tcToMs($fTc1) Local $fMs2 = _tcToMs($fTc2) Local $fSumMs = $fMs1 - $fMs2 If $fSumMs < 0 Then $fSumMs = _tcToMs("24:00:00.00") - ($fSumMs * -1) EndIf Return _msToTc($fSumMs, $fFormat) EndFunc ; #FUNCTION# ; Name...........: _tcToMs ; Description....: Returns timecode converted to total milliseconds ; Syntax.........: _tcToMs($fTc) ; ; Parameters.....: $fTc - Timecode in hh:mm:ss.ff or hh:mm:ss:xxx format, where xxx are milliseconds ; ; Return value...: Milliseconds as an integer value Func _tcToMs($fTc) Local $fTemp = StringSplit($fTc, ":.") Local $fChr = StringLen($fTemp[4]) Switch $fChr Case 2 Return ($fTemp[4] * 40) + ($fTemp[3] * 1000) + ($fTemp[2] * 60000) + ($fTemp[1] * 3600000) Case 3 Return ($fTemp[4]) + ($fTemp[3] * 1000) + ($fTemp[2] * 60000) + ($fTemp[1] * 3600000) EndSwitch EndFunc ; #FUNCTION# ; Name...........: _msToTc ; Description....: Converts total milliseconds to timecode ; Syntax.........: _msToTc($fIn, $fFormat = "P", $fHourFormat = 1) ; ; Parameters.....: $fIn - Time in milliseconds ; $fFormat - Output format "P": PAL TC (default) ; "M": hh:mm:ss.xxx where xxx are milliseconds ; $fHourFormat - Hour format "1": max. value is 23, then starts from 0 (default) ; "0": hours can be more then 23 ; ; Return value...: Timecode as string in the selected format Func _msToTc($fIn, $fFormat = "P", $fHourFormat = 1) Switch $fFormat Case "P" Local $fFr = StringFormat("%02i", (StringRight($fIn, 3) - Mod(StringRight($fIn, 3), 40)) / 40) Case "M" Local $fFr = StringFormat("%03i", StringRight($fIn, 3)) EndSwitch $fIn = StringTrimRight($fIn, 3) Local $fSec = StringFormat("%02i", Mod($fIn, 60)) $fIn -= $fSec Local $fMinTot = $fIn / 60 Local $fMin = StringFormat("%02i", Mod($fMinTot, 60)) $fIn -= $fMin*60 Local $fHourTot = $fIn / 60 / 60 Switch $fHourFormat Case 1 $fHour = StringFormat("%02i", Mod($fHourTot, 24)) Case 0 $fHour = StringFormat("%02i", $fHourTot) EndSwitch Return($fHour & ":" & $fMin & ":" & $fSec & "." & $fFr) EndFunc ; #FUNCTION# ; Name...........: _tcFormatChange ; Description....: Toggle TC format ; Syntax.........: _tcFormatChange($fTc) ; ; Parameters.....: $fTc - Timecode in hh:mm:ss.ff or hh:mm:ss:xxx format, where xxx are milliseconds ; ; Return value...: PAL timecode or time with milliseconds as string, depends on input Func _tcFormatChange($fTc) Local $fTemp = StringSplit($fTc, ":.") Local $fChr = StringLen($fTemp[4]) Switch $fChr Case 2 Return $fTemp[1]&":"&$fTemp[2]&":"&$fTemp[3]&"."&StringFormat("%03i", $fTemp[4]*40) Case 3 Return $fTemp[1]&":"&$fTemp[2]&":"&$fTemp[3]&"."&StringFormat("%02i", ($fTemp[4]-Mod($fTemp[4], 40))/40) EndSwitch EndFunc And the example script:
      #include<_PAL_TC_Calc.au3> $palTC1 = "00:01:12.20" $palTC2 = "23:59:50.02" $msTC1 = "00:01:12.800" $msTC2 = "23:59:50.120" MsgBox(0, "1", _tcAdd($palTC1, $palTC2)); Adds $palTC1 to $palTC2, turns hour back to 0 after 23, returns PAL TC format MsgBox(0, "2", _tcAdd($palTC1, $palTC2, "M")); Adds $palTC1 to $palTC2, turns hour back to 0 after 23, returns time with milliseconds format MsgBox(0, "3", _tcAdd($palTC1, $palTC2, "M", 0)); Adds $palTC1 to $palTC2, hours can be infinite, returns time with milliseconds format MsgBox(0, "4", _tcAdd($msTC1, $msTC2)); Adds $palTC1 to $palTC2, turns hour back to 0 after 23, returns PAL TC format MsgBox(0, "5", _tcAdd($msTC1, $msTC2, "M")); Adds $palTC1 to $palTC2, turns hour back to 0 after 23, returns time with milliseconds format MsgBox(0, "6", _tcAdd($msTC1, $msTC2, "M", 0)); Adds $palTC1 to $palTC2, hours can be infinite, returns time with milliseconds format MsgBox(0, "7", _tcSub($palTC2, $palTC1)); Subtract $palTC1 from $palTC2, returns PAL TC format MsgBox(0, "8", _tcSub($palTC2, $palTC1, "M")); Subtract $palTC1 from $palTC2, time with milliseconds format MsgBox(0, "9", _tcSub($msTC1, $msTC2)); Subtract $palTC1 from $palTC2, returns PAL TC format - when hits zero, counts back from 24:00:00.00 MsgBox(0, "10", _tcSub($msTC1, $msTC2, "M")); Subtract $palTC1 from $palTC2, time with milliseconds format - when hits zero, counts back from 24:00:00.000 MsgBox(0, "11", _tcFormatChange($palTC2)); Convert PAL TC to time with milliseconds and back MsgBox(0, "12", _tcFormatChange($msTC2)); Convert PAL TC to time with milliseconds and back  
      TC_CALC_example.au3
      _PAL_TC_Calc.au3
    • By nacerbaaziz
      Hi dears
      How are you?
      I have a question, to you please.
      How do I create an edit box for numbers only and does not accept letters? using autoit
      greetings to all
      I hope you help ME
      Thanks to all in advance
    • By UritOR
      Hi all,
      How do I allow an input control (GUICtrlCreateInput) to get only digits and dots?
      $ES_NUMBER - allows only digits, but I need to be able to type something like this only:   2.15.1598.1
      Can you help me please? 
×
×
  • Create New...