Jump to content

Recommended Posts

I am having trouble understanding why the following code does not work.

THe way it is now, with this line commented out...

   ;$iRval = _EzMySql_GetTable2d($sSQL

...it works fine and populates the excel spreadsheet with the heading rows "System Impact" etc.

However, if I uncomment out the line I mention above, nothing goes to the Excel spreadsheet.

Where I have the messagebox reporting the value of Ubound on the array (for debugging purposes) it returns the correct value, i.e. the number of rows the sql has returned.

I have also included a screen snap of the array display, showing that the array does indeed contain data.

Here is the function

Func _Excel_Xport()
   local $cntr,$wf,$tempresult,$iSval,$iRval[10][10]
   local $sFilePath = @TempDir & "\Temp.xls"
   local $oExcel = _Excel_Open()
   If Not _FileCreate($sFilePath) Then
      MsgBox(4096, "Error", " Error Creating File - " & @error & " - " & @extended)
      return 1
   EndIf
   $oExcel = _Excel_BookOpen($oExcel,$sFilePath, Default, Default, True)
   if $oExcel = 0 Then
      MsgBox(0,"Error",@error)
      Return
   EndIf
   $oExcel = _Excel_BookAttach("Microsoft Excel - Temp.xls","Title")
   if $oExcel = 0 Then
      MsgBox(0,"Error","Unable to attach to spreadsheet")
      Return
   EndIf
   for $cntr = 1 to 8
      if GUICtrlRead($r_[$cntr]) = 1 Then
         Switch $cntr
            Case 1
               $wf="%"
            Case 2
               $wf="%5"
            Case 3
               $wf="1_0"
            Case 4
               $wf=20
            Case 5
               $wf=30
            Case 6
               $wf=40
            Case 7
               $wf=50
            Case 8
               $wf=3
         EndSwitch
         ExitLoop
      EndIf
   next
   $sSQL="SELECT * FROM rfc_manager.tbl_RFC WHERE RFC_Workflow_Status LIKE """ & $wf & """ AND RFC_Workflow_Status <> ""9999"";"
   ;$iRval = _EzMySql_GetTable2d($sSQL)
   $error = @error
   msgbox(0,"test",Ubound($iRval))
   $iRval[0][0]="Test"
   if uBound($iRval)=1 Then MsgBox(0, $sSQL & " error", $error)
   ReDim $iRval[UBound($iRval)][26]                             ; Add a few columns to the array
   $iRval[0][13]="System Impact"
   $iRval[0][14]="Tech Est Hours"
   $iRval[0][15]="Tech Quoted Hours"
   $iRval[0][16]="Func Est Hours"
   $iRval[0][17]="Func Quoted Hours"
   $iRval[0][18]="Admin Est Hours"
   $iRval[0][19]="Admin Quoted Hours"
   $iRval[0][20]="Payment Method"
   $iRval[0][21]="PO Number"
   $iRval[0][22]="CAB Priority"
   $iRval[0][23]="CAB Notes"
   $iRval[0][24]="Vendor Notes"
   $iRval[0][25]="Reason Notes"
   _ArrayDisplay($iRval)
   $iSval = _Excel_RangeWrite($oExcel,$oExcel.Activesheet, $iRval)
   if $iSval = 0 Then msgbox(0,"Error",@error)
EndFunc

And here is the array displayed

<a href="http://s111.photobucket.com/user/wongdai/media/array_display_zps9832c577.jpg.html" target="_blank"><img src="'>" border="0" alt=" photo array_display_zps9832c577.jpg"/></a>

I hope I have explained this clearly enough

Link to post
Share on other sites

Thanks Jfish

I just tried removing the redim and the consequent statements that addressed the now out of bounds array values but this had no effect on the problem.

I'm pretty sure redim preserves the values in an array anyway.

Link to post
Share on other sites

What happens when you try to display the array in a separate GUI? What I mean by that is rename the variable then use _arraydisplay to see if the array is available. If not then you got part of the problem figured out.

(Note: _ArrayDisplay will only show a 1D or 2D array in a list view)

Link to post
Share on other sites

Thanks for your reply DarthCookieMonster

I'm not really understanding what you are suggesting.

When you say "rename the variable", do you mean copy the $iRval array to a new array variable and then try to display that with _arraydisplay?

I apologise in advance if I am being dumb.

Link to post
Share on other sites

Why do you modify the array to insert header lines?

Create an array with the header lines and write them to Excel.

Then write the array to Excel starting in row 2.

My UDFs and Tutorials:

Spoiler

UDFs:
Active Directory (NEW 2021-11-10 - Version 1.6.0.0) - Download - General Help & Support - Example Scripts - Wiki
ExcelChart (2017-07-21 - Version 0.4.0.1) - Download - General Help & Support - Example Scripts
OutlookEX (NEW 2021-11-16 - Version 1.7.0.0) - Download - General Help & Support - Example Scripts - Wiki
OutlookEX_GUI (2021-04-13 - Version 1.4.0.0) - Download
Outlook Tools (2019-07-22 - Version 0.6.0.0) - Download - General Help & Support - Wiki
PowerPoint (NEW 2021-08-31 - Version 1.5.0.0) - Download - General Help & Support - Example Scripts - Wiki
Task Scheduler (2019-12-03 - Version 1.5.1.0) - Download - General Help & Support - Wiki

Standard UDFs:
Excel - Example Scripts - Wiki
Word - Wiki

Tutorials:
ADO - Wiki
WebDriver - Wiki

 

Link to post
Share on other sites

Another question:

Why do you use _Excel_BookAttach after you have opened the Workbook using _Excel-BookOpen?

My UDFs and Tutorials:

Spoiler

UDFs:
Active Directory (NEW 2021-11-10 - Version 1.6.0.0) - Download - General Help & Support - Example Scripts - Wiki
ExcelChart (2017-07-21 - Version 0.4.0.1) - Download - General Help & Support - Example Scripts
OutlookEX (NEW 2021-11-16 - Version 1.7.0.0) - Download - General Help & Support - Example Scripts - Wiki
OutlookEX_GUI (2021-04-13 - Version 1.4.0.0) - Download
Outlook Tools (2019-07-22 - Version 0.6.0.0) - Download - General Help & Support - Wiki
PowerPoint (NEW 2021-08-31 - Version 1.5.0.0) - Download - General Help & Support - Example Scripts - Wiki
Task Scheduler (2019-12-03 - Version 1.5.1.0) - Download - General Help & Support - Wiki

Standard UDFs:
Excel - Example Scripts - Wiki
Word - Wiki

Tutorials:
ADO - Wiki
WebDriver - Wiki

 

Link to post
Share on other sites

Another question:

Why do you create the Excel file using FileCreate? I'm not sure this always works as expected.

I would use:

If FileExists($sFilePath) Then
     $oExcel = _Excel_BookOpen($oExcel,$sFilePath, Default, Default, True)
Else
     $oExcel = _Excel_BookNew(...)
EndIf

BTW: I would use meaningful names for your avariables. $oExcel (iat least in my examples) is used for the Excel application. For the Workbook I use $oWorkbook.

My UDFs and Tutorials:

Spoiler

UDFs:
Active Directory (NEW 2021-11-10 - Version 1.6.0.0) - Download - General Help & Support - Example Scripts - Wiki
ExcelChart (2017-07-21 - Version 0.4.0.1) - Download - General Help & Support - Example Scripts
OutlookEX (NEW 2021-11-16 - Version 1.7.0.0) - Download - General Help & Support - Example Scripts - Wiki
OutlookEX_GUI (2021-04-13 - Version 1.4.0.0) - Download
Outlook Tools (2019-07-22 - Version 0.6.0.0) - Download - General Help & Support - Wiki
PowerPoint (NEW 2021-08-31 - Version 1.5.0.0) - Download - General Help & Support - Example Scripts - Wiki
Task Scheduler (2019-12-03 - Version 1.5.1.0) - Download - General Help & Support - Wiki

Standard UDFs:
Excel - Example Scripts - Wiki
Word - Wiki

Tutorials:
ADO - Wiki
WebDriver - Wiki

 

Link to post
Share on other sites

Why do you modify the array to insert header lines?

Create an array with the header lines and write them to Excel.

Then write the array to Excel starting in row 2.

 

Thanks Water

THis is because the initial sql retrieve also brings back column headings, but only for columns 0-12. 

Nevertheless, in the interest of trying to solve this problem, I have removed the array rewrite and cleaned up the Excel code as per your suggestions above.

The sql retrieves are returning 2d arrays as confirmed by ubound, however, when I write the array out to Excel, nothing is appearing other than the headings which I manually insert.

Excel_Rangewrite does not return an error when writing out the retrieved 2d arrays.

Any ideas?

Link to post
Share on other sites

Don't know why _Excel_RangeWrite doesn't write data to the workbook.

Could you please try this statement? It uses a less limited function to transpose the array:

$iSval = _Excel_RangeWrite($oExcel, $oExcel.Activesheet, $iRval, "A1", Default, True)

My UDFs and Tutorials:

Spoiler

UDFs:
Active Directory (NEW 2021-11-10 - Version 1.6.0.0) - Download - General Help & Support - Example Scripts - Wiki
ExcelChart (2017-07-21 - Version 0.4.0.1) - Download - General Help & Support - Example Scripts
OutlookEX (NEW 2021-11-16 - Version 1.7.0.0) - Download - General Help & Support - Example Scripts - Wiki
OutlookEX_GUI (2021-04-13 - Version 1.4.0.0) - Download
Outlook Tools (2019-07-22 - Version 0.6.0.0) - Download - General Help & Support - Wiki
PowerPoint (NEW 2021-08-31 - Version 1.5.0.0) - Download - General Help & Support - Example Scripts - Wiki
Task Scheduler (2019-12-03 - Version 1.5.1.0) - Download - General Help & Support - Wiki

Standard UDFs:
Excel - Example Scripts - Wiki
Word - Wiki

Tutorials:
ADO - Wiki
WebDriver - Wiki

 

Link to post
Share on other sites

Glad the problem could be solved.

It is strange that you do not get an error message with your original code :huh:

My UDFs and Tutorials:

Spoiler

UDFs:
Active Directory (NEW 2021-11-10 - Version 1.6.0.0) - Download - General Help & Support - Example Scripts - Wiki
ExcelChart (2017-07-21 - Version 0.4.0.1) - Download - General Help & Support - Example Scripts
OutlookEX (NEW 2021-11-16 - Version 1.7.0.0) - Download - General Help & Support - Example Scripts - Wiki
OutlookEX_GUI (2021-04-13 - Version 1.4.0.0) - Download
Outlook Tools (2019-07-22 - Version 0.6.0.0) - Download - General Help & Support - Wiki
PowerPoint (NEW 2021-08-31 - Version 1.5.0.0) - Download - General Help & Support - Example Scripts - Wiki
Task Scheduler (2019-12-03 - Version 1.5.1.0) - Download - General Help & Support - Wiki

Standard UDFs:
Excel - Example Scripts - Wiki
Word - Wiki

Tutorials:
ADO - Wiki
WebDriver - Wiki

 

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Rskm
      Hi, I have 5 notepad files with lot of data in each of it. The data are arranged in lines and i wish to get it pasted/copied into excel.  Say, i need to read notepad1 and paste the contents into sheet1 of excel and notepad2 to sheet2 and so on.  If i read the notepad and paste it line by line, it is taking lot of time.  Is there a way by which i can paste the whole of notepad file into excel sheet(and get it pasted line by line as shown in the attached excel), instead of using code to write it line by line?.. I was using Filewriteline(data, line i) initially to write to excel.  The 'i' value was incremented with for loop and the excel was updated, but this takes lot of time.  The expected excel format is attached here.  any help is appreciated.  thanks
      Tmp.xls
    • By Hermes
      Hello, the script below will read column A from an excel file - and if a value matches in the browser, it will click the corresponding link and click on a specific button to paste the data, then writes "Completed" in Column B. It will continue to read from the excel file and do the same thing for all the remaining rows.
      #Include "Chrome.au3" #Include "wd_core.au3" #Include "wd_helper.au3" #Include "WinHttp.au3" #include <MsgBoxConstants.au3> #include <File.au3> #include <IE.au3> #include <Array.au3> #include <INet.au3> #include <AutoItConstants.au3> #include <WinAPIFiles.au3> #include <GDIPlus.au3> #include <Excel.au3> #Include "WinHttp.au3" #Include "_HtmlTable2Array.au3" Local $sDesiredCapabilities, $sSession SetupChrome() _WD_Startup() $sSession = _WD_CreateSession($sDesiredCapabilities) _WD_LoadWait($sSession) _WD_Navigate($sSession, "table1.html") _WD_LoadWait($sSession) _WD_WaitElement($sSession, $_WD_LOCATOR_ByXPath, "//table[@class='main']") Local $sElement = _WD_FindElement($sSession, $_WD_LOCATOR_ByXPath, "//table[@class='main']") ;ConsoleWrite ("mat-table " & $sElement & @CRLF) Local $aArray1 = _WD_FindElement($sSession, $_WD_LOCATOR_ByXPath, ".//td[contains(@class,'data')]", $sElement, True) sleep(1000) For $i = 0 to UBound($aArray1) - 1 $aArray1[$i] = _WD_ElementAction($sSession, $aArray1[$i], 'text') Next ;_ArrayDisplay($aArray1) ;Email variables $SmtpServer = "" ; address for the smtp-server to use - REQUIRED $FromName = "Hermes" ; name from who the email was sent $FromAddress = "sender@gmail.com" ; address from where the mail should come $ToAddress = "recipient@gmail.com" ; destination address of the email - REQUIRED, use commas (,) to add more email addresses $Subject = "File not found" ; subject from the email - can be anything you want it to be $Body = "File not found!" ; the messagebody from the mail - can be left blank but then you get a blank mail $AttachFiles = "" ; the file(s) you want to attach seperated with a ; (Semicolon) - leave blank if not needed $CcAddress = "" ; address for cc - leave blank if not needed $BccAddress = "" ; address for bcc - leave blank if not needed $Importance = "High" ; Send message priority: "High", "Normal", "Low" $Username = "" ; username for the account used from where the mail gets sent - REQUIRED $Password = "" ; password for the account used from where the mail gets sent - REQUIRED $IPPort = 25 ; port used for sending the mail $ssl = 0 ; enables/disables secure socket layer sending - put to 1 if using httpS $tls = 0 ; enables/disables TLS when required Local $oAppl = _Excel_Open() Local $sWorkbook = "c:\test.xlsx" Local $oWorkbook = _Excel_BookOpen($oAppl, $sWorkbook) ;open excel and pass both parameters If FileExists($sWorkbook) Then ;Check if the file exist. Local $oAppl = _Excel_Open() Local $sWorkbook = "c:\test.xlsx" Local $oWorkbook = _Excel_BookOpen($oAppl, $sWorkbook) ;open excel and pass both parameters Local $aArray2 = _Excel_RangeRead($oWorkbook,Default,$oWorkbook.ActiveSheet.Usedrange.Columns("A:A")) Local $iIdx Local $Skipline = 0 ;0==> first line Do Local $temprf For $i = 0 To UBound($aArray2) - 1 $temprf &= $aArray2[$i] _WD_WaitElement($sSession, $_WD_LOCATOR_ByXPath, ".//a[contains(@class,'edit') and contains(text(),'Edit')]") Local $aElement = _WD_FindElement($sSession, $_WD_LOCATOR_ByXPath, ".//a[contains(@class,'edit') and contains(text(),'Edit')]", $sElement, True) $iIdx = _ArraySearch($aArray1, $aArray2[$i]) If @error Then ContinueLoop _WD_ElementAction($sSession, $aElement[$iIdx], 'click') If $i < $Skipline Then ContinueLoop $oRange = $oWorkbook.ActiveSheet.Range("B" & $i + 1 & ":XFD" & $i + 1) _Excel_RangeCopyPaste($oWorkbook.Activesheet, $oRange) ;Paste Local $oTest4 = _WD_FindElement($sSession, $_WD_LOCATOR_ByCSSSelector, "pastebutton") _WD_ElementAction($sSession, $oTest4, 'click') Sleep(1000) ;Save Button Local $save3 = _WD_FindElement($sSession, $_WD_LOCATOR_ByCSSSelector, "button.button") _WD_ElementAction($sSession, $save3, 'click') _Excel_RangeWrite($oWorkbook, $oWorkbook.Activesheet, "Completed", "B" & $i+1) sleep(1000) Next Until (Not @error) _Excel_Close($oWorkbook) Else _INetSmtpMailCom($SmtpServer, $FromName, $FromAddress, $ToAddress, $Subject, $Body, $CcAddress, $BccAddress, $Importance, $Username, $Password, $IPPort, $ssl, $tls) Exit EndIf _WD_LoadWait($sSession) ;Attaching files to emails Func _INetSmtpMailCom($s_SmtpServer, $s_FromName, $s_FromAddress, $s_ToAddress, $s_Subject = "", $as_Body = "", $s_CcAddress = "", $s_BccAddress = "", $s_Importance="Normal", $s_Username = "", $s_Password = "", $IPPort = 25, $ssl = 0, $tls = 0) Local $objEmail = ObjCreate("CDO.Message") $objEmail.From = '"' & $s_FromName & '" <' & $s_FromAddress & '>' $objEmail.To = $s_ToAddress Local $i_Error = 0 Local $i_Error_desciption = "" If $s_CcAddress <> "" Then $objEmail.Cc = $s_CcAddress If $s_BccAddress <> "" Then $objEmail.Bcc = $s_BccAddress $objEmail.Subject = $s_Subject If StringInStr($as_Body, "<") And StringInStr($as_Body, ">") Then $objEmail.HTMLBody = $as_Body Else $objEmail.Textbody = $as_Body & @CRLF EndIf $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendusing") = 2 $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpserver") = $s_SmtpServer If Number($IPPort) = 0 then $IPPort = 25 $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpserverport") = $IPPort ;Authenticated SMTP If $s_Username <> "" Then $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpauthenticate") = 1 $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendusername") = $s_Username $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendpassword") = $s_Password EndIf ; Set security params If $ssl Then $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpusessl") = True If $tls Then $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendtls") = True ;Update settings $objEmail.Configuration.Fields.Update ; Set Email Importance Switch $s_Importance Case "High" $objEmail.Fields.Item ("urn:schemas:mailheader:Importance") = "High" Case "Normal" $objEmail.Fields.Item ("urn:schemas:mailheader:Importance") = "Normal" Case "Low" $objEmail.Fields.Item ("urn:schemas:mailheader:Importance") = "Low" EndSwitch $objEmail.Fields.Update ; Sent the Message $objEmail.Send $objEmail="" EndFunc ;==>_INetSmtpMailCom Local $aDir = _FileListToArrayRec(@TempDir, "scoped_dir*;chrome_*", $FLTAR_FOLDERS, $FLTAR_NORECUR, $FLTAR_NOSORT, $FLTAR_FULLPATH) Sleep(2000) For $i = 1 To $aDir[0] DirRemove($aDir[$i], $DIR_REMOVE) Next _WD_LoadWait($sSession) _WD_Shutdown() Func SetupChrome() _WD_Option('Driver', 'chromedriver.exe') _WD_Option('Port', 9515) _WD_Option('DriverParams', '--log-path="' & @ScriptDir & '\chrome.log"') $sDesiredCapabilities = '{"capabilities": {"alwaysMatch": {"goog:chromeOptions": {"w3c": true, "args":["start-maximized","disable-infobars"]}}}}' EndFunc ;==>SetupChrome If the excel file doesn't exists in the folder, it will send an email to a specific recipient.
      What i am trying figure out now is if the excel crashes while the script/loop is running, I want to relaunch the excel file continue to the last row before the excel crashed. So if the value of column B is not marked as "completed", it should continue from that row
      Appreciate any help that I can get to achieve this.
      table1.html test.xlsx
    • By Mannyfresh31
      Please help with this 3D Array the first example works the secound doesn't.
      Need help to understand how Arrays work.
      Many thanks in advance
      ;First Example Dim $aArray[2][2][2] $aArray[0][0][0] = 1 $aArray[0][0][1] = 2 $aArray[0][1][0] = 3 $aArray[0][1][1] = 4 $aArray[1][0][0] = 5 $aArray[1][0][1] = 6 $aArray[1][1][0] = 7 $aArray[1][1][1] = 8 For $a = 0 to 1 for $b = 0 to 1 for $c = 0 to 1 ConsoleWrite($aArray[$a][$b][$c] & @CRLF) Next Next Next ;Secound Example Local $aArraym [2][2][2]=[[[1,2,],[3,4],[5,6],[7,8]]] For $a = 0 to 1 for $b = 0 to 1 for $c = 0 to 1 ConsoleWrite($aArraym[$a][$b][$c] & @CRLF) Next Next Next  
    • By robertocm
      change linked image paths in excel 2007 Open XML Files with AutoIt and 7-zip:
      #include <File.au3> #include <WinAPIFiles.au3> ;Required 7-zip Global $Path7z = @ProgramFilesDir & "\7-Zip" If Not FileExists($Path7z & "\7z.exe") Then MsgBox(16, "", "7z.exe not found in path " & $Path7z) Exit EndIf Global $bFileOpen Global $sFileRead ;Global $sOldImg = "C:\Users\MyUserName\Documents\MyImageFolder" ;Global $sNewImg = "C:\Users\ANOTHERUSERNAME\Documents\AnotherImageFolder" Global $sOldImg = "C:\Users\MyUserName\Documents\MyImageFolder\My%20Image1.png" Global $sNewImg = "C:\Users\ANOTHERUSERNAME\Documents\AnotherImageFolder\My%20Image1.png" Global $sFileSelectFolder = FileSelectFolder("Directory to change excel image paths", "") Global $sTempDir = @ScriptDir & "\TempDir" Global $sFileCoreXml = $sTempDir & "\docProps\core.xml" If FileExists($sTempDir) Then DirRemove($sTempDir, $DIR_REMOVE) ;Look for excel files in selected directory and subdirectories Global $aFileList = _FileListToArrayRec($sFileSelectFolder, "*.xls*", $FLTAR_FILES, $FLTAR_RECUR, $FLTAR_NOSORT, $FLTAR_FULLPATH) If Not @error Then For $i = 1 To $aFileList[0] ;Discard some kind of temp files (locked files from antivirus?) If StringLeft($aFileList[$i], 1) = "~" Then ContinueLoop $bFileOpen = _WinAPI_FileInUse($aFileList[$i]) If $bFileOpen = 0 Then ;use x command to keep the folder stucture, -aoa Overwrite All existing files without prompt, use -r to unzip the subfolders from the zip file RunWait('"' & $Path7z & '\7z.exe" x -aoa -r -y "' & $aFileList[$i] & '" -o"' & $sTempDir & '"', $Path7z, @SW_HIDE) If FileExists($sFileCoreXml) Then $sFileRead = FileRead($sFileCoreXml) If __ReplaceImagePaths($sTempDir, $sOldImg, $sNewImg) = 1 Then Consolewrite("--> Image path replaced in file: " & $aFileList[$i] & @CRLF) EndIf ;Help File 7-zip.chm 'Switch can be used in any place in command line' RunWait('"' & $Path7z & '\7z.exe" a -r -tzip -y "' & $aFileList[$i] & '" "' & $sTempDir & '\*"', $Path7z, @SW_HIDE) Else If FileExists($sTempDir & "\EncryptedPackage") Then Consolewrite("Error password protected file: " & $aFileList[$i] & @CRLF) EndIf DirRemove($sTempDir, $DIR_REMOVE) Else Consolewrite("Error Locked file: " & $aFileList[$i] & @CRLF) EndIf Next Else MsgBox(16, "Error", "No excel files were found in the folder") EndIf Func __ReplaceImagePaths($sTempDir, $sFind, $sReplace) ;List all files with .xml.rels extension in the directory \xl\drawings\_rels Local $aFileListDrw = _FileListToArray($sTempDir & "\xl\drawings\_rels", "*.xml.rels", 1, True) If @error = 1 Then ;MsgBox (0, "", "Path was invalid") SplashTextOn("Title", "Path was invalid", -1, -1, -1, -1, 1, "", 24) Sleep(2000) SplashOff() Exit EndIf If @error = 4 Then ;MsgBox (0, "No files", "No files were found") SplashTextOn("Title", "No files were found", -1, -1, -1, -1, 1, "", 24) Sleep(2000) SplashOff() Exit EndIf Local $iRetval ;Loop through the array For $i = 1 To $aFileListDrw[0] $iRetval = _ReplaceStringInFile($aFileListDrw[$i], $sFind, $sReplace) Next If Not $iRetval = -1 Then Return 1 EndFunc  
      Some references:
      https://stackoverflow.com/questions/37145369/change-path-to-picture-links-in-excel http://www.jkp-ads.com/Articles/Excel2007FileFormat.asp EDITED:
      Note: it seems that if User Account Control (UAC) is enabled then 7zip is unable to overwrite the destination file (using the same name).
      In this case, a possible solution would be to rename the original excel file before (see _PathSplit in help file).
      In my case i prefer just to disable UAC
    • By Hermes
      My _Excel_RangeCopyPaste is not working as intended. What I am trying to accomplish is copy the range B:E using _Excel_RangeCopyPaste in the first row and repeat the same for row 2 and so on.
      ;Skip from reading header columns Local $Skipline = 0 ;0==> first line Local $temprf For $i = 0 To UBound($aArray2) - 1 If $Skipline = $i Then ContinueLoop $temprf &= $aArray2[$i] _Excel_RangeCopyPaste($oWorkbook.Activesheet, $oRange) Local $oTest = _WD_FindElement($sSession, $_WD_LOCATOR_ByCSSSelector, "PasteButton") ;This button will paste values from the Clipboard once clicked _WD_ElementAction($sSession, $oTest, 'click')) Next Here's the full code:
      #Include <Chrome.au3> #Include <wd_core.au3> #Include <wd_helper.au3> #Include <WinHttp.au3> #include <MsgBoxConstants.au3> #include <IE.au3> #include <Array.au3> #include <Excel.au3> Local $sDesiredCapabilities, $sSession SetupChrome() _WD_Startup() $sSession = _WD_CreateSession($sDesiredCapabilities) _WD_LoadWait($sSession) _WD_Navigate($sSession, "test.html") Local $oAppl = _Excel_Open() Local $sWorkbook = "test.xlsx" Local $oWorkbook = _Excel_BookOpen($oAppl, $sWorkbook) ;open excel and pass both parameters Local $aArray2 = _Excel_RangeRead($oWorkbook,Default,$oWorkbook.ActiveSheet.Usedrange.Columns("A:A")) Local $oRange = $oWorkbook.ActiveSheet.Range("B:E") ;Skip from reading header columns Local $Skipline = 0 ;0==> first line Local $temprf For $i = 0 To UBound($aArray2) - 1 If $Skipline = $i Then ContinueLoop $temprf &= $aArray2[$i] _Excel_RangeCopyPaste($oWorkbook.Activesheet, $oRange) Local $oTest = _WD_FindElement($sSession, $_WD_LOCATOR_ByCSSSelector, "PasteButton") ;This button will paste values from the Clipboard once clicked _WD_ElementAction($sSession, $oTest, 'click')) Next _WD_Shutdown() Func SetupChrome() _WD_Option('Driver', 'chromedriver.exe') _WD_Option('Port', 9515) _WD_Option('DriverParams', '--log-path="' & @ScriptDir & '\chrome.log"') Return '{"capabilities":{"alwaysMatch":{"goog:chromeOptions":{"w3c":true,' & _ '"excludeSwitches":["enable-automation"],"useAutomationExtension":false}}}}' EndFunc ;==>SetupChrome For the first row I am trying to copy just B:E with the following info
      Apple Banana Orange Mango and then repeat for row 2, row 3, etc. I've attached the spreadhseet.
      test.xlsxI have also attached the excel file for reference.
×
×
  • Create New...