Jump to content

How To Put A Function After If,Then


Go to solution Solved by MHz,

Recommended Posts

If....Then
    MyFunction()
EndIf

If this doesn't work, then I'm afraid you didn't make yourself clear.

UDF List:

 
_AdapterConnections()_AlwaysRun()_AppMon()_AppMonEx()_ArrayFilter/_ArrayReduce_BinaryBin()_CheckMsgBox()_CmdLineRaw()_ContextMenu()_ConvertLHWebColor()/_ConvertSHWebColor()_DesktopDimensions()_DisplayPassword()_DotNet_Load()/_DotNet_Unload()_Fibonacci()_FileCompare()_FileCompareContents()_FileNameByHandle()_FilePrefix/SRE()_FindInFile()_GetBackgroundColor()/_SetBackgroundColor()_GetConrolID()_GetCtrlClass()_GetDirectoryFormat()_GetDriveMediaType()_GetFilename()/_GetFilenameExt()_GetHardwareID()_GetIP()_GetIP_Country()_GetOSLanguage()_GetSavedSource()_GetStringSize()_GetSystemPaths()_GetURLImage()_GIFImage()_GoogleWeather()_GUICtrlCreateGroup()_GUICtrlListBox_CreateArray()_GUICtrlListView_CreateArray()_GUICtrlListView_SaveCSV()_GUICtrlListView_SaveHTML()_GUICtrlListView_SaveTxt()_GUICtrlListView_SaveXML()_GUICtrlMenu_Recent()_GUICtrlMenu_SetItemImage()_GUICtrlTreeView_CreateArray()_GUIDisable()_GUIImageList_SetIconFromHandle()_GUIRegisterMsg()_GUISetIcon()_Icon_Clear()/_Icon_Set()_IdleTime()_InetGet()_InetGetGUI()_InetGetProgress()_IPDetails()_IsFileOlder()_IsGUID()_IsHex()_IsPalindrome()_IsRegKey()_IsStringRegExp()_IsSystemDrive()_IsUPX()_IsValidType()_IsWebColor()_Language()_Log()_MicrosoftInternetConnectivity()_MSDNDataType()_PathFull/GetRelative/Split()_PathSplitEx()_PrintFromArray()_ProgressSetMarquee()_ReDim()_RockPaperScissors()/_RockPaperScissorsLizardSpock()_ScrollingCredits_SelfDelete()_SelfRename()_SelfUpdate()_SendTo()_ShellAll()_ShellFile()_ShellFolder()_SingletonHWID()_SingletonPID()_Startup()_StringCompact()_StringIsValid()_StringRegExpMetaCharacters()_StringReplaceWholeWord()_StringStripChars()_Temperature()_TrialPeriod()_UKToUSDate()/_USToUKDate()_WinAPI_Create_CTL_CODE()_WinAPI_CreateGUID()_WMIDateStringToDate()/_DateToWMIDateString()Au3 script parsingAutoIt SearchAutoIt3 PortableAutoIt3WrapperToPragmaAutoItWinGetTitle()/AutoItWinSetTitle()CodingDirToHTML5FileInstallrFileReadLastChars()GeoIP databaseGUI - Only Close ButtonGUI ExamplesGUICtrlDeleteImage()GUICtrlGetBkColor()GUICtrlGetStyle()GUIEventsGUIGetBkColor()Int_Parse() & Int_TryParse()IsISBN()LockFile()Mapping CtrlIDsOOP in AutoItParseHeadersToSciTE()PasswordValidPasteBinPosts Per DayPreExpandProtect GlobalsQueue()Resource UpdateResourcesExSciTE JumpSettings INISHELLHOOKShunting-YardSignature CreatorStack()Stopwatch()StringAddLF()/StringStripLF()StringEOLToCRLF()VSCROLLWM_COPYDATAMore Examples...

Updated: 22/04/2018

Link to comment
Share on other sites

not possible in one line if statements.

Edited by MikahS

Snips & Scripts


My Snips: graphCPUTemp ~ getENVvars
My Scripts: Short-Order Encrypter - message and file encryption V1.6.1 ~ AuPad - Notepad written entirely in AutoIt V1.9.4

Feel free to use any of my code for your own use.                                                                                                                                                           Forum FAQ

 

Link to comment
Share on other sites

yeah its a big script about 40 lines without the Myfunction() its just the script in Myfunction()

do I have to do this in the  While Switch  EndSwitch WEnd and how because I failed at that, Do i need to show the whole script where im talking about?

Maybe wise if you do.

UDF List:

 
_AdapterConnections()_AlwaysRun()_AppMon()_AppMonEx()_ArrayFilter/_ArrayReduce_BinaryBin()_CheckMsgBox()_CmdLineRaw()_ContextMenu()_ConvertLHWebColor()/_ConvertSHWebColor()_DesktopDimensions()_DisplayPassword()_DotNet_Load()/_DotNet_Unload()_Fibonacci()_FileCompare()_FileCompareContents()_FileNameByHandle()_FilePrefix/SRE()_FindInFile()_GetBackgroundColor()/_SetBackgroundColor()_GetConrolID()_GetCtrlClass()_GetDirectoryFormat()_GetDriveMediaType()_GetFilename()/_GetFilenameExt()_GetHardwareID()_GetIP()_GetIP_Country()_GetOSLanguage()_GetSavedSource()_GetStringSize()_GetSystemPaths()_GetURLImage()_GIFImage()_GoogleWeather()_GUICtrlCreateGroup()_GUICtrlListBox_CreateArray()_GUICtrlListView_CreateArray()_GUICtrlListView_SaveCSV()_GUICtrlListView_SaveHTML()_GUICtrlListView_SaveTxt()_GUICtrlListView_SaveXML()_GUICtrlMenu_Recent()_GUICtrlMenu_SetItemImage()_GUICtrlTreeView_CreateArray()_GUIDisable()_GUIImageList_SetIconFromHandle()_GUIRegisterMsg()_GUISetIcon()_Icon_Clear()/_Icon_Set()_IdleTime()_InetGet()_InetGetGUI()_InetGetProgress()_IPDetails()_IsFileOlder()_IsGUID()_IsHex()_IsPalindrome()_IsRegKey()_IsStringRegExp()_IsSystemDrive()_IsUPX()_IsValidType()_IsWebColor()_Language()_Log()_MicrosoftInternetConnectivity()_MSDNDataType()_PathFull/GetRelative/Split()_PathSplitEx()_PrintFromArray()_ProgressSetMarquee()_ReDim()_RockPaperScissors()/_RockPaperScissorsLizardSpock()_ScrollingCredits_SelfDelete()_SelfRename()_SelfUpdate()_SendTo()_ShellAll()_ShellFile()_ShellFolder()_SingletonHWID()_SingletonPID()_Startup()_StringCompact()_StringIsValid()_StringRegExpMetaCharacters()_StringReplaceWholeWord()_StringStripChars()_Temperature()_TrialPeriod()_UKToUSDate()/_USToUKDate()_WinAPI_Create_CTL_CODE()_WinAPI_CreateGUID()_WMIDateStringToDate()/_DateToWMIDateString()Au3 script parsingAutoIt SearchAutoIt3 PortableAutoIt3WrapperToPragmaAutoItWinGetTitle()/AutoItWinSetTitle()CodingDirToHTML5FileInstallrFileReadLastChars()GeoIP databaseGUI - Only Close ButtonGUI ExamplesGUICtrlDeleteImage()GUICtrlGetBkColor()GUICtrlGetStyle()GUIEventsGUIGetBkColor()Int_Parse() & Int_TryParse()IsISBN()LockFile()Mapping CtrlIDsOOP in AutoItParseHeadersToSciTE()PasswordValidPasteBinPosts Per DayPreExpandProtect GlobalsQueue()Resource UpdateResourcesExSciTE JumpSettings INISHELLHOOKShunting-YardSignature CreatorStack()Stopwatch()StringAddLF()/StringStripLF()StringEOLToCRLF()VSCROLLWM_COPYDATAMore Examples...

Updated: 22/04/2018

Link to comment
Share on other sites

Ok,

Global $iIndex = 0

#Region ### START Koda GUI section ### Form=
$Form1_1_1_1 = GUICreate("program", 814, 713, 697, 101)
_GUIExtender_Init($Form1_1_1_1)

$List1 = GUICtrlCreateList("", 0, 64, 145, 358)
GUICtrlSetData(-1, "")
$List2 = GUICtrlCreateList("", 144, 64, 65, 358)
GUICtrlSetData(-1, "")
$List3 = GUICtrlCreateList("", 208, 64, 65, 358)
GUICtrlSetData(-1, "")
$List4 = GUICtrlCreateList("", 344, 64, 153, 358)
GUICtrlSetData(-1, "")
$List5 = GUICtrlCreateList("", 496, 64, 65, 358)
GUICtrlSetData(-1, "")
$List6 = GUICtrlCreateList("", 560, 64, 121, 230)
GUICtrlSetData(-1, "")
$List7 = GUICtrlCreateList("", 680, 64, 65, 230)
GUICtrlSetData(-1, "")
$List8 = GUICtrlCreateList("", 744, 64, 65, 230)
GUICtrlSetData(-1, "")
$List9 = GUICtrlCreateList("", 272, 64, 65, 358)
GUICtrlSetData(-1, "")

GUISetState(@SW_SHOW)
Local $helpmenu, $infoitem, $exititem, $recentfilesmenu
    Local $viewmenu, $viewstatusitem
    Local $statuslabel, $msg, $file



    $filemenu = GUICtrlCreateMenu("&File")
    $fileitem = GUICtrlCreateMenuItem("Open", $filemenu)
    GUICtrlSetState(-1, $GUI_DEFBUTTON)
    $helpmenu = GUICtrlCreateMenu("?")
    GUICtrlCreateMenuItem("Save", $filemenu)
    GUICtrlSetState(-1, $GUI_DISABLE)
    $infoitem = GUICtrlCreateMenuItem("Info", $helpmenu)
    $exititem = GUICtrlCreateMenuItem("Exit", $filemenu)
    $recentfilesmenu = GUICtrlCreateMenu("Recent Files", $filemenu, 1)

    GUICtrlCreateMenuItem("", $filemenu, 2) ; create a separator line

    $viewmenu = GUICtrlCreateMenu("View", -1, 1) ; is created before "?" menu
    $viewstatusitem = GUICtrlCreateMenuItem("Statusbar", $viewmenu)
    $message4 = GUICtrlCreateMenuItem("message", $filemenu)
; here I would like to have a function

If $msg = $message Then MsgBox($MB_SYSTEMMODAL, "Info", " " & $1newfile)

The function:

Local $newfile = StringReplace($file, "Openfile.txt", "")

$1newfile = ($newfile & ("lists\list"))


Global $iIndex = 0, $sListData1 = ($1newfile & ("1"))
Global $sListFile1 = ($1newfile & ("1"))

Global $iIndex = 0, $sListData2 = ($1newfile & ("2"))
Global $sListFile2 = ($1newfile & ("2"))

Global $iIndex = 0, $sListData3 = ($1newfile & ("3"))
Global $sListFile3 = ($1newfile & ("3"))

Global $iIndex = 0, $sListData4 = ($1newfile & ("4"))
Global $sListFile4 = ($1newfile & ("4"))

Global $iIndex = 0, $sListData5 = ($1newfile & ("5"))
Global $sListFile5 = ($1newfile & ("5"))

Global $iIndex = 0, $sListData6 = ($1newfile & ("6"))
Global $sListFile6 = ($1newfile & ("6"))

Global $iIndex = 0, $sListData7 = ($1newfile & ("7"))
Global $sListFile7 = ($1newfile & ("7"))

Global $iIndex = 0, $sListData8 = ($1newfile & ("8"))
Global $sListFile8 = ($1newfile & ("8"))

Global $iIndex = 0, $sListData9 = ($1newfile & ("9"))
Global $sListFile9 = ($1newfile & ("9"))

Global $iIndex = 0, $sListData10 = ($1newfile & ("10"))
Global $sListFile10 = ($1newfile & ("10"))

Global $iIndex = 0, $sListData11 = ($1newfile & ("11"))
Global $sListFile11 = ($1newfile & ("11"))

Global $iIndex = 0, $sListData12 = ($1newfile & ("12"))
Global $sListFile12 = ($1newfile & ("12"))

Global $iIndex = 0, $sListData13 = ($1newfile & ("13"))
Global $sListFile13 = ($1newfile & ("13"))







; Read saved file if it exists--------
If FileExists($sListFile1) Then
    $sListData1 = FileRead($sListFile1)
EndIf

; Load data read from the file
GUICtrlSetData($List1, $sListData1)
_GUICtrlListBox_SetCurSel($List1, $iIndex)



; Read saved file if it exists--------
If FileExists($sListFile2) Then
    $sListData2 = FileRead($sListFile2)
EndIf




; Load data read from the file
GUICtrlSetData($List2, $sListData2)
_GUICtrlListBox_SetCurSel($List2, $iIndex)


; Read saved file if it exists--------
If FileExists($sListFile3) Then
    $sListData3 = FileRead($sListFile3)
EndIf




; Load data read from the file
GUICtrlSetData($List3, $sListData3)
_GUICtrlListBox_SetCurSel($List3, $iIndex)

; Read saved file if it exists--------
If FileExists($sListFile4) Then
    $sListData4 = FileRead($sListFile4)
EndIf




; Load data read from the file
GUICtrlSetData($List4, $sListData4)
_GUICtrlListBox_SetCurSel($List4, $iIndex)


; Read saved file if it exists--------
If FileExists($sListFile5) Then
    $sListData5 = FileRead($sListFile5)
EndIf



; Load data read from the file
GUICtrlSetData($List5, $sListData5)
_GUICtrlListBox_SetCurSel($List5, $iIndex)




; Read saved file if it exists--------
If FileExists($sListFile6) Then
    $sListData6 = FileRead($sListFile6)
EndIf

; Load data read from the file
GUICtrlSetData($List6, $sListData6)
_GUICtrlListBox_SetCurSel($List6, $iIndex)

; Read saved file if it exists--------
If FileExists($sListFile7) Then
    $sListData7 = FileRead($sListFile7)
EndIf

; Load data read from the file
GUICtrlSetData($List7, $sListData7)
_GUICtrlListBox_SetCurSel($List7, $iIndex)




; Read saved file if it exists--------
If FileExists($sListFile8) Then
    $sListData8 = FileRead($sListFile8)
EndIf

; Load data read from the file
GUICtrlSetData($List8, $sListData8)
_GUICtrlListBox_SetCurSel($List8, $iIndex)



; Read saved file if it exists--------
If FileExists($sListFile9) Then
    $sListData9 = FileRead($sListFile9)
EndIf

; Load data read from the file
GUICtrlSetData($List9, $sListData9)
_GUICtrlListBox_SetCurSel($List9, $iIndex)


; Read saved file if it exists--------
If FileExists($sListFile10) Then
    $sListData10 = FileRead($sListFile10)
EndIf

; Load data read from the file
GUICtrlSetData($money, $sListData10)
_GUICtrlListBox_SetCurSel($money, $sListData10)

How can I activate this function properly

Link to comment
Share on other sites

I will leave it to some expert to help you, as I am royally confused.

UDF List:

 
_AdapterConnections()_AlwaysRun()_AppMon()_AppMonEx()_ArrayFilter/_ArrayReduce_BinaryBin()_CheckMsgBox()_CmdLineRaw()_ContextMenu()_ConvertLHWebColor()/_ConvertSHWebColor()_DesktopDimensions()_DisplayPassword()_DotNet_Load()/_DotNet_Unload()_Fibonacci()_FileCompare()_FileCompareContents()_FileNameByHandle()_FilePrefix/SRE()_FindInFile()_GetBackgroundColor()/_SetBackgroundColor()_GetConrolID()_GetCtrlClass()_GetDirectoryFormat()_GetDriveMediaType()_GetFilename()/_GetFilenameExt()_GetHardwareID()_GetIP()_GetIP_Country()_GetOSLanguage()_GetSavedSource()_GetStringSize()_GetSystemPaths()_GetURLImage()_GIFImage()_GoogleWeather()_GUICtrlCreateGroup()_GUICtrlListBox_CreateArray()_GUICtrlListView_CreateArray()_GUICtrlListView_SaveCSV()_GUICtrlListView_SaveHTML()_GUICtrlListView_SaveTxt()_GUICtrlListView_SaveXML()_GUICtrlMenu_Recent()_GUICtrlMenu_SetItemImage()_GUICtrlTreeView_CreateArray()_GUIDisable()_GUIImageList_SetIconFromHandle()_GUIRegisterMsg()_GUISetIcon()_Icon_Clear()/_Icon_Set()_IdleTime()_InetGet()_InetGetGUI()_InetGetProgress()_IPDetails()_IsFileOlder()_IsGUID()_IsHex()_IsPalindrome()_IsRegKey()_IsStringRegExp()_IsSystemDrive()_IsUPX()_IsValidType()_IsWebColor()_Language()_Log()_MicrosoftInternetConnectivity()_MSDNDataType()_PathFull/GetRelative/Split()_PathSplitEx()_PrintFromArray()_ProgressSetMarquee()_ReDim()_RockPaperScissors()/_RockPaperScissorsLizardSpock()_ScrollingCredits_SelfDelete()_SelfRename()_SelfUpdate()_SendTo()_ShellAll()_ShellFile()_ShellFolder()_SingletonHWID()_SingletonPID()_Startup()_StringCompact()_StringIsValid()_StringRegExpMetaCharacters()_StringReplaceWholeWord()_StringStripChars()_Temperature()_TrialPeriod()_UKToUSDate()/_USToUKDate()_WinAPI_Create_CTL_CODE()_WinAPI_CreateGUID()_WMIDateStringToDate()/_DateToWMIDateString()Au3 script parsingAutoIt SearchAutoIt3 PortableAutoIt3WrapperToPragmaAutoItWinGetTitle()/AutoItWinSetTitle()CodingDirToHTML5FileInstallrFileReadLastChars()GeoIP databaseGUI - Only Close ButtonGUI ExamplesGUICtrlDeleteImage()GUICtrlGetBkColor()GUICtrlGetStyle()GUIEventsGUIGetBkColor()Int_Parse() & Int_TryParse()IsISBN()LockFile()Mapping CtrlIDsOOP in AutoItParseHeadersToSciTE()PasswordValidPasteBinPosts Per DayPreExpandProtect GlobalsQueue()Resource UpdateResourcesExSciTE JumpSettings INISHELLHOOKShunting-YardSignature CreatorStack()Stopwatch()StringAddLF()/StringStripLF()StringEOLToCRLF()VSCROLLWM_COPYDATAMore Examples...

Updated: 22/04/2018

Link to comment
Share on other sites

ArcLite86,

This is the same as >this thread...please stick to one thread.  You are not getting help because you are not presenting your need/problem clearly.  The code that you are posting is neither runnable nor logical.

From the code that you posted in this thread I can see that you either did NOT understand my response to your previous post, or, chose to ignore it. 

Regardless, I'll try one more time.

basically I got 9 lists and the function reads from the notepads:  from list1 to list9

I only want a Load and save system for this lists, thats all

 

The following does the above.  If this is not what you intend post back with explicit details.  The TXT files are in the directory that the script is run from.

#include <GUIConstantsEx.au3>
#include <File.au3>
#include <array.au3>

#AutoIt3Wrapper_Add_Constants=n

local $gui010   =   guicreate('')
local $aSize    =   wingetclientsize($gui010)
local $cmb010   =   guictrlcreatecombo('',20,20,300,200)
                    guisetstate()

; populate the combo box with the contents of the array ($aFiles)
local $aFiles = _filelisttoarray(@scriptdir,'*.txt',default,true)
for $1 = 1 to $aFiles[0]
    guictrlsetdata($cmb010,$aFiles[$1])
Next
guictrlsetdata($cmb010,$aFiles[1])  ;   set default entry for the combo box

while 1
    switch guigetmsg()
        case $gui_event_close
            Exit
        case $cmb010
            ;
            ; do whatever you want with the selection from the combo box
            ;
            ConsoleWrite('Contents of file = ' & fileread(guictrlread($cmb010)) & @CRLF)
    EndSwitch
WEnd

Again, I would encourage you to read the Help file.  The code that you posted indicates a lack of understanding of some basics fundamental to the language.

kylomas

edit:spelling

Edited by kylomas

Forum Rules         Procedure for posting code

"I like pigs.  Dogs look up to us.  Cats look down on us.  Pigs treat us as equals."

- Sir Winston Churchill

Link to comment
Share on other sites

No this is not what I wanted because  when I select one directory it puts the name of the directory in the list instead of the content of the lists

 

Again, I would encourage you to read the Help file.  The code that you posted indicates a lack of understanding of some basics fundamental to the language.

 

I got the whole menu from the help file:

Local $helpmenu, $infoitem, $exititem, $recentfilesmenu
    Local $viewmenu, $viewstatusitem
    Local $statuslabel, $msg, $file



    $filemenu = GUICtrlCreateMenu("&File")
    $fileitem = GUICtrlCreateMenuItem("Open", $filemenu)
    GUICtrlSetState(-1, $GUI_DEFBUTTON)
    $helpmenu = GUICtrlCreateMenu("?")
    GUICtrlCreateMenuItem("Save", $filemenu)
    GUICtrlSetState(-1, $GUI_DISABLE)
    $infoitem = GUICtrlCreateMenuItem("Info", $helpmenu)
    $exititem = GUICtrlCreateMenuItem("Exit", $filemenu)
    $recentfilesmenu = GUICtrlCreateMenu("Recent Files", $filemenu, 1)

    GUICtrlCreateMenuItem("", $filemenu, 2) ; create a separator line

    $viewmenu = GUICtrlCreateMenu("View", -1, 1) ; is created before "?" menu
    $viewstatusitem = GUICtrlCreateMenuItem("Statusbar", $viewmenu)
    $message4 = GUICtrlCreateMenuItem("message", $filemenu)
; here I would like to have a function

If $msg = $message Then MsgBox($MB_SYSTEMMODAL, "Info", " " & $1newfile)

Why the hell is it so hard to open a text.file for a list?? :huh:

Link to comment
Share on other sites

  • Moderators

Arclite86,

The problem is not that it is "hard to open a text.file for a list" - the problem is that none of us have the remotest idea of what you are actually trying to do, which makes it very difficult to help you in any sensible way. The code you posted above is little help as it appears completely random, with no interconnectivity, and, for the most part, less than runnable. :(>

So what is the overall aim of this script - what is it supposed to do? For example, you state:

I got 9 lists and the function reads from the notepads

What "notepads"? Do you mean instances of Windows' Notepad? Edit controls that you have created - but which appear nowhere in your code? Paper notepads on the desks of those who run the script? Can you see why we are confused? :wacko:

Please take the time to write something which clearly explains the purpose of this script - then we might understand what you want and be able to offer you the help you need. As it is you stand little chance of getting any further replies as there is little point in posting code which may or may not have any bearing on your problem. :(>

M23

Public_Domain.png.2d871819fcb9957cf44f4514551a2935.png Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind

Open spoiler to see my UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Link to comment
Share on other sites

I'd like to add, post a RUNNABLE script that attempts to show what you want to do, even if it doesn't work completly correctly. Make it as complete as possible, you might actually figure out where you're going wrong in the process, and then we can see what you are trying to do, or at least we all hope so.

If I posted any code, assume that code was written using the latest release version unless stated otherwise. Also, if it doesn't work on XP I can't help with that because I don't have access to XP, and I'm not going to.
Give a programmer the correct code and he can do his work for a day. Teach a programmer to debug and he can do his work for a lifetime - by Chirag Gude
How to ask questions the smart way!

I hereby grant any person the right to use any code I post, that I am the original author of, on the autoitscript.com forums, unless I've specifically stated otherwise in the code or the thread post. If you do use my code all I ask, as a courtesy, is to make note of where you got it from.

Back up and restore Windows user files _Array.au3 - Modified array functions that include support for 2D arrays.  -  ColorChooser - An add-on for SciTE that pops up a color dialog so you can select and paste a color code into a script.  -  Customizable Splashscreen GUI w/Progress Bar - Create a custom "splash screen" GUI with a progress bar and custom label.  -  _FileGetProperty - Retrieve the properties of a file  -  SciTE Toolbar - A toolbar demo for use with the SciTE editor  -  GUIRegisterMsg demo - Demo script to show how to use the Windows messages to interact with controls and your GUI.  -   Latin Square password generator

Link to comment
Share on other sites

Ok sorry if i wasn't clear:

I would like to have to have an openfile that opens text files and reads the content and put it in a list  this is the code for that

the list:

$List1 = GUICtrlCreateList("", 0, 64, 105, 370, BitOR($WS_BORDER, $WS_VSCROLL))

This is the code for reading the text and put it in the list above 

; Read saved file if it exists--------
If FileExists($sListFile1) Then
    $sListData1 = FileRead($sListFile1)
EndIf

; Load data read from the file
GUICtrlSetData($List1, $sListData1)
_GUICtrlListBox_SetCurSel($List1, $iIndex)

this is give the $slistData1 the directory (bellow)

Global $iIndex = 0, $sListData1 = "C:\Users\joesoef pc\Desktop\autoit\twitter programma\lijsten\list1.txt"
Global $sListFile1 = "C:\Users\joesoef pc\Desktop\autoit\twitter programma\lijsten\list1.txt"

but this works:

Global $sListFile1 = "C:\Users\joesoef pc\Desktop\autoit\twitter programma\lijsten\list1.txt"

but this isn't

Global $iIndex = 0, $sListData1 = ($1newfile & ("1"))
Global $sListFile1 = ($1newfile & ("1"))

my question is why:

The code above is the same directory as the code therefor, but I need the use a variable so I can open different files and not only: "C:Usersjoesoef pcDesktopautoittwitter programmalijstenlist1.txt"

I already know how to find the directory code that I found from the help file:

While 1

        $msg = GUIGetMsg()

        If $msg = $fileitem Then
            $file = FileOpenDialog("Choose file...", @TempDir, "All (*.*)")
            If @error <> 1 Then GUICtrlCreateMenuItem($file, $recentfilesmenu)
        EndIf
        If $msg = $viewstatusitem Then
            If BitAND(GUICtrlRead($viewstatusitem), $GUI_CHECKED) = $GUI_CHECKED Then
                GUICtrlSetState($viewstatusitem, $GUI_UNCHECKED)
                GUICtrlSetState($statuslabel, $GUI_HIDE)
            Else
                GUICtrlSetState($viewstatusitem, $GUI_CHECKED)
                GUICtrlSetState($statuslabel, $GUI_SHOW)
            EndIf
        EndIf
        If $msg = $GUI_EVENT_CLOSE Or $msg = $exititem Then ExitLoop





    Local $newfile = StringReplace($file, "Openfile.txt", "")

$1newfile = ($newfile & ("lists\list"))

; my code


        If $msg = $infoitem Then MsgBox($MB_SYSTEMMODAL, "Info", "Only a test...")
If $msg = $message Then MsgBox($MB_SYSTEMMODAL, "Info", " " & $1newfile)


    WEnd
    GUIDelete()

the code above opens the directry:

C:Usersjoesoef pcDesktopautoittwitter programmalijstenlijsten2weigt lossOpenfile.txt

but it needs to open:

C:Usersjoesoef pcDesktopautoittwitter programmalijstenlijsten2weigt losslists1

C:Usersjoesoef pcDesktopautoittwitter programmalijstenlijsten2weigt losslists2

C:Usersjoesoef pcDesktopautoittwitter programmalijstenlijsten2weigt losslists3

......

C:Usersjoesoef pcDesktopautoittwitter programmalijstenlijsten2weigt losslists9

so when it opens: C:Usersjoesoef pcDesktopautoittwitter programmalijstenlijsten2weigt lossOpenfile.txt

I deleted the "Openfile.txt" with

Local $newfile = StringReplace($file, "Openfile.txt", "")

and than

$1newfile = ($newfile & ("lists\list"))

and than to find the directy

Global $iIndex = 0, $sListData1 = ($1newfile & ("1"))
Global $sListFile1 = ($1newfile & ("1"))

the lists

$List1 = GUICtrlCreateList("", 0, 64, 145, 358)
GUICtrlSetData(-1, "")
$List2 = GUICtrlCreateList("", 144, 64, 65, 358)
GUICtrlSetData(-1, "")
$List3 = GUICtrlCreateList("", 208, 64, 65, 358)
GUICtrlSetData(-1, "")
$List4 = GUICtrlCreateList("", 344, 64, 153, 358)
GUICtrlSetData(-1, "")
$List5 = GUICtrlCreateList("", 496, 64, 65, 358)
GUICtrlSetData(-1, "")
$List6 = GUICtrlCreateList("", 560, 64, 121, 230)
GUICtrlSetData(-1, "")
$List7 = GUICtrlCreateList("", 680, 64, 65, 230)
GUICtrlSetData(-1, "")
$List8 = GUICtrlCreateList("", 744, 64, 65, 230)
GUICtrlSetData(-1, "")
$List9 = GUICtrlCreateList("", 272, 64, 65, 358)
GUICtrlSetData(-1, "")

and than to read and put in the lists

; Read saved file if it exists--------
If FileExists($sListFile1) Then
    $sListData1 = FileRead($sListFile1)
EndIf

; Load data read from the file
GUICtrlSetData($List1, $sListData1)
_GUICtrlListBox_SetCurSel($List1, $iIndex)

I think I explained everyting if there are more question please ask me

Link to comment
Share on other sites

the working script:

$_FF_COM_TRACE = True
#include <MsgBoxConstants.au3>
#include <ButtonConstants.au3>
#include <EditConstants.au3>
#include <GUIConstantsEx.au3>
#include <GUIListBox.au3>
#include <WindowsConstants.au3>
#include <FF.au3>
#include <staticConstants.au3>
#include <IE.au3>
#include <String.au3>
#include <Excel.au3>
#include <FileConstants.au3>
#include <IE.au3>
#include <String.au3>
#include <GUIConstantsEx.au3>
#include "GUIExtender.au3"

Local $oIE
;, BitOR($WS_BORDER, $WS_VSCROLL)

;_FFStart( "https://www.google.nl" )
;WinSetState ( "Google - Mozilla Firefox", "",  @SW_MINIMIZE )








;~ _GUIExtender_Init($Form1_1_1_1)

For $i = 1 To 13
    FileDelete(@ScriptDir & "\list" & $i & ".txt")
    FileWrite(@ScriptDir & "\list" & $i & ".txt", "text " & $i)
Next


#Region ### START Koda GUI section ### Form=
$Form1_1_1_1 = GUICreate("program", 814, 713, 697, 101)
$List1 = GUICtrlCreateList("", 0, 64, 145, 358)
GUICtrlSetData(-1, "")
$List2 = GUICtrlCreateList("", 144, 64, 65, 358)
GUICtrlSetData(-1, "")
$List3 = GUICtrlCreateList("", 208, 64, 65, 358)
GUICtrlSetData(-1, "")
$List4 = GUICtrlCreateList("", 344, 64, 153, 358)
GUICtrlSetData(-1, "")
$List5 = GUICtrlCreateList("", 496, 64, 65, 358)
GUICtrlSetData(-1, "")
$List6 = GUICtrlCreateList("", 560, 64, 121, 230)
GUICtrlSetData(-1, "")
$List7 = GUICtrlCreateList("", 680, 64, 65, 230)
GUICtrlSetData(-1, "")
$List8 = GUICtrlCreateList("", 744, 64, 65, 230)
GUICtrlSetData(-1, "")
$List9 = GUICtrlCreateList("", 272, 64, 65, 358)
GUICtrlSetData(-1, "")

GUISetState(@SW_SHOW)

    Local $helpmenu, $infoitem, $exititem, $recentfilesmenu
    Local $viewmenu, $viewstatusitem
    Local $statuslabel, $msg, $file



    $filemenu = GUICtrlCreateMenu("&File")
    $fileitem = GUICtrlCreateMenuItem("Open", $filemenu)
    GUICtrlSetState(-1, $GUI_DEFBUTTON)
    $helpmenu = GUICtrlCreateMenu("?")
    GUICtrlCreateMenuItem("Save", $filemenu)
    GUICtrlSetState(-1, $GUI_DISABLE)
    $infoitem = GUICtrlCreateMenuItem("Info", $helpmenu)
    $exititem = GUICtrlCreateMenuItem("Exit", $filemenu)
    $recentfilesmenu = GUICtrlCreateMenu("Recent Files", $filemenu, 1)

    GUICtrlCreateMenuItem("", $filemenu, 2) ; create a separator line

    $viewmenu = GUICtrlCreateMenu("View", -1, 1) ; is created before "?" menu
    $viewstatusitem = GUICtrlCreateMenuItem("Statusbar", $viewmenu)
    $message4 = GUICtrlCreateMenuItem("message", $filemenu)




    GUICtrlSetState(-1, $GUI_FOCUS)




    GUISetState(@SW_SHOW)

; Loop until the user exits.
    While 1

        $msg = GUIGetMsg()

        If $msg = $fileitem Then
            $file = FileOpenDialog("Choose file...", @TempDir, "All (*.*)")
            If @error <> 1 Then GUICtrlCreateMenuItem($file, $recentfilesmenu)
        EndIf
        If $msg = $viewstatusitem Then
            If BitAND(GUICtrlRead($viewstatusitem), $GUI_CHECKED) = $GUI_CHECKED Then
                GUICtrlSetState($viewstatusitem, $GUI_UNCHECKED)
                GUICtrlSetState($statuslabel, $GUI_HIDE)
            Else
                GUICtrlSetState($viewstatusitem, $GUI_CHECKED)
                GUICtrlSetState($statuslabel, $GUI_SHOW)
            EndIf
        EndIf
        If $msg = $GUI_EVENT_CLOSE Or $msg = $exititem Then ExitLoop





    Local $newfile = StringReplace($file, "Openfile.txt", "")

$1newfile = ($newfile & ("lists\list"))


Global $iIndex = 0, $sListData1 = ($1newfile & ("1"))
Global $sListFile1 = ($1newfile & ("1"))

Global $iIndex = 0, $sListData2 = ($1newfile & ("2"))
Global $sListFile2 = ($1newfile & ("2"))

Global $iIndex = 0, $sListData3 = ($1newfile & ("3"))
Global $sListFile3 = ($1newfile & ("3"))

Global $iIndex = 0, $sListData4 = ($1newfile & ("4"))
Global $sListFile4 = ($1newfile & ("4"))

Global $iIndex = 0, $sListData5 = ($1newfile & ("5"))
Global $sListFile5 = ($1newfile & ("5"))

Global $iIndex = 0, $sListData6 = ($1newfile & ("6"))
Global $sListFile6 = ($1newfile & ("6"))

Global $iIndex = 0, $sListData7 = ($1newfile & ("7"))
Global $sListFile7 = ($1newfile & ("7"))

Global $iIndex = 0, $sListData8 = ($1newfile & ("8"))
Global $sListFile8 = ($1newfile & ("8"))

Global $iIndex = 0, $sListData9 = ($1newfile & ("9"))
Global $sListFile9 = ($1newfile & ("9"))

Global $iIndex = 0, $sListData10 = ($1newfile & ("10"))
Global $sListFile10 = ($1newfile & ("10"))

Global $iIndex = 0, $sListData11 = ($1newfile & ("11"))
Global $sListFile11 = ($1newfile & ("11"))

Global $iIndex = 0, $sListData12 = ($1newfile & ("12"))
Global $sListFile12 = ($1newfile & ("12"))

Global $iIndex = 0, $sListData13 = ($1newfile & ("13"))
Global $sListFile13 = ($1newfile & ("13"))







; Read saved file if it exists--------
If FileExists($sListFile1) Then
    $sListData1 = FileRead($sListFile1)
EndIf

; Load data read from the file
GUICtrlSetData($List1, $sListData1)
_GUICtrlListBox_SetCurSel($List1, $iIndex)



; Read saved file if it exists--------
If FileExists($sListFile2) Then
    $sListData2 = FileRead($sListFile2)
EndIf




; Load data read from the file
GUICtrlSetData($List2, $sListData2)
_GUICtrlListBox_SetCurSel($List2, $iIndex)


; Read saved file if it exists--------
If FileExists($sListFile3) Then
    $sListData3 = FileRead($sListFile3)
EndIf




; Load data read from the file
GUICtrlSetData($List3, $sListData3)
_GUICtrlListBox_SetCurSel($List3, $iIndex)

; Read saved file if it exists--------
If FileExists($sListFile4) Then
    $sListData4 = FileRead($sListFile4)
EndIf




; Load data read from the file
GUICtrlSetData($List4, $sListData4)
_GUICtrlListBox_SetCurSel($List4, $iIndex)


; Read saved file if it exists--------
If FileExists($sListFile5) Then
    $sListData5 = FileRead($sListFile5)
EndIf



; Load data read from the file
GUICtrlSetData($List5, $sListData5)
_GUICtrlListBox_SetCurSel($List5, $iIndex)




; Read saved file if it exists--------
If FileExists($sListFile6) Then
    $sListData6 = FileRead($sListFile6)
EndIf

; Load data read from the file
GUICtrlSetData($List6, $sListData6)
_GUICtrlListBox_SetCurSel($List6, $iIndex)

; Read saved file if it exists--------
If FileExists($sListFile7) Then
    $sListData7 = FileRead($sListFile7)
EndIf

; Load data read from the file
GUICtrlSetData($List7, $sListData7)
_GUICtrlListBox_SetCurSel($List7, $iIndex)




; Read saved file if it exists--------
If FileExists($sListFile8) Then
    $sListData8 = FileRead($sListFile8)
EndIf

; Load data read from the file
GUICtrlSetData($List8, $sListData8)
_GUICtrlListBox_SetCurSel($List8, $iIndex)



; Read saved file if it exists--------
If FileExists($sListFile9) Then
    $sListData9 = FileRead($sListFile9)
EndIf

; Load data read from the file
GUICtrlSetData($List9, $sListData9)
_GUICtrlListBox_SetCurSel($List9, $iIndex)


; Read saved file if it exists--------
If FileExists($sListFile10) Then
    $sListData10 = FileRead($sListFile10)
EndIf





        If $msg = $infoitem Then MsgBox($MB_SYSTEMMODAL, "Info", "Only a test...")



    WEnd
    GUIDelete()

#EndRegion ### END Koda GUI section ###

if you run this I would only reads the directory and sets the name of the directory instead of the content.

this is what the text file is showing (what it needs to show in the lists)

ExtWeightLoss|samomidi|mnt_weightloss|weight__loss|Scoat5|_Zibee_|iWeightLossCom|WeightLossTwins|WeightDietLoss|thegreatmiracle|AWeightLossTea|TLSWeightLoss|weightlossjuice|weightlossbitch|7weightloss7|TLSWeightLoss|losefatnowblog........etc

Edited by Arclite86
Link to comment
Share on other sites

  • Moderators

Arclite86,

 

Some light dawns - but not a lot. ;)

First thing - you need to get all the file read code into a separate function:

$_FF_COM_TRACE = True
#include <MsgBoxConstants.au3>
#include <ButtonConstants.au3>
#include <EditConstants.au3>
#include <GUIConstantsEx.au3>
#include <GUIListBox.au3>
#include <WindowsConstants.au3>
;#include <FF.au3>
#include <staticConstants.au3>
#include <IE.au3>
#include <String.au3>
#include <Excel.au3>
#include <FileConstants.au3>
#include <IE.au3>
#include <String.au3>
#include <GUIConstantsEx.au3>
#include "GUIExtender.au3"

Local $oIE
;, BitOR($WS_BORDER, $WS_VSCROLL)

;_FFStart( "https://www.google.nl" )
;WinSetState ( "Google - Mozilla Firefox", "", @SW_MINIMIZE )








;~ _GUIExtender_Init($Form1_1_1_1)

For $i = 1 To 13
FileDelete(@ScriptDir & "\list" & $i & ".txt")
FileWrite(@ScriptDir & "\list" & $i & ".txt", "text " & $i)
Next


#Region ### START Koda GUI section ### Form=
$Form1_1_1_1 = GUICreate("program", 814, 713, 697, 101)
$List1 = GUICtrlCreateList("", 0, 64, 145, 358)
GUICtrlSetData(-1, "")
$List2 = GUICtrlCreateList("", 144, 64, 65, 358)
GUICtrlSetData(-1, "")
$List3 = GUICtrlCreateList("", 208, 64, 65, 358)
GUICtrlSetData(-1, "")
$List4 = GUICtrlCreateList("", 344, 64, 153, 358)
GUICtrlSetData(-1, "")
$List5 = GUICtrlCreateList("", 496, 64, 65, 358)
GUICtrlSetData(-1, "")
$List6 = GUICtrlCreateList("", 560, 64, 121, 230)
GUICtrlSetData(-1, "")
$List7 = GUICtrlCreateList("", 680, 64, 65, 230)
GUICtrlSetData(-1, "")
$List8 = GUICtrlCreateList("", 744, 64, 65, 230)
GUICtrlSetData(-1, "")
$List9 = GUICtrlCreateList("", 272, 64, 65, 358)
GUICtrlSetData(-1, "")

GUISetState(@SW_SHOW)

Local $helpmenu, $infoitem, $exititem, $recentfilesmenu
Local $viewmenu, $viewstatusitem
Local $statuslabel, $msg, $file



$filemenu = GUICtrlCreateMenu("&File")
$fileitem = GUICtrlCreateMenuItem("Open", $filemenu)
GUICtrlSetState(-1, $GUI_DEFBUTTON)
$helpmenu = GUICtrlCreateMenu("?")
GUICtrlCreateMenuItem("Save", $filemenu)
GUICtrlSetState(-1, $GUI_DISABLE)
$infoitem = GUICtrlCreateMenuItem("Info", $helpmenu)
$exititem = GUICtrlCreateMenuItem("Exit", $filemenu)
$recentfilesmenu = GUICtrlCreateMenu("Recent Files", $filemenu, 1)

GUICtrlCreateMenuItem("", $filemenu, 2) ; create a separator line

$viewmenu = GUICtrlCreateMenu("View", -1, 1) ; is created before "?" menu
$viewstatusitem = GUICtrlCreateMenuItem("Statusbar", $viewmenu)
$message4 = GUICtrlCreateMenuItem("message", $filemenu)




GUICtrlSetState(-1, $GUI_FOCUS)




GUISetState(@SW_SHOW)

; Loop until the user exits.
While 1

$msg = GUIGetMsg()

If $msg = $fileitem Then
ConsoleWrite("Hit" & @CRLF)

$file = FileOpenDialog("Choose file...", @TempDir, "All (*.*)")
If @error <> 1 Then
GUICtrlCreateMenuItem($file, $recentfilesmenu)
_FillLists($file)
EndIf
EndIf
If $msg = $viewstatusitem Then
If BitAND(GUICtrlRead($viewstatusitem), $GUI_CHECKED) = $GUI_CHECKED Then
GUICtrlSetState($viewstatusitem, $GUI_UNCHECKED)
GUICtrlSetState($statuslabel, $GUI_HIDE)
Else
GUICtrlSetState($viewstatusitem, $GUI_CHECKED)
GUICtrlSetState($statuslabel, $GUI_SHOW)
EndIf
EndIf
If $msg = $GUI_EVENT_CLOSE Or $msg = $exititem Then ExitLoop


If $msg = $infoitem Then MsgBox($MB_SYSTEMMODAL, "Info", "Only a test...")



WEnd
GUIDelete()

#EndRegion ### END Koda GUI section ###

Func _FillLists($file)

Local $newfile = StringReplace($file, "Openfile.txt", "")

$1newfile = ($newfile & ("lists\list"))


Global $iIndex = 0, $sListData1 = ($1newfile & ("1"))
Global $sListFile1 = ($1newfile & ("1"))

Global $iIndex = 0, $sListData2 = ($1newfile & ("2"))
Global $sListFile2 = ($1newfile & ("2"))

Global $iIndex = 0, $sListData3 = ($1newfile & ("3"))
Global $sListFile3 = ($1newfile & ("3"))

Global $iIndex = 0, $sListData4 = ($1newfile & ("4"))
Global $sListFile4 = ($1newfile & ("4"))

Global $iIndex = 0, $sListData5 = ($1newfile & ("5"))
Global $sListFile5 = ($1newfile & ("5"))

Global $iIndex = 0, $sListData6 = ($1newfile & ("6"))
Global $sListFile6 = ($1newfile & ("6"))

Global $iIndex = 0, $sListData7 = ($1newfile & ("7"))
Global $sListFile7 = ($1newfile & ("7"))

Global $iIndex = 0, $sListData8 = ($1newfile & ("8"))
Global $sListFile8 = ($1newfile & ("8"))

Global $iIndex = 0, $sListData9 = ($1newfile & ("9"))
Global $sListFile9 = ($1newfile & ("9"))

Global $iIndex = 0, $sListData10 = ($1newfile & ("10"))
Global $sListFile10 = ($1newfile & ("10"))

Global $iIndex = 0, $sListData11 = ($1newfile & ("11"))
Global $sListFile11 = ($1newfile & ("11"))

Global $iIndex = 0, $sListData12 = ($1newfile & ("12"))
Global $sListFile12 = ($1newfile & ("12"))

Global $iIndex = 0, $sListData13 = ($1newfile & ("13"))
Global $sListFile13 = ($1newfile & ("13"))







; Read saved file if it exists--------
If FileExists($sListFile1) Then
$sListData1 = FileRead($sListFile1)
Else
MsgBox($MB_SYSTEMMODAL, "Error", $sListFile1 & " does not exist") ; <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
EndIf

; Load data read from the file
GUICtrlSetData($List1, $sListData1)
_GUICtrlListBox_SetCurSel($List1, $iIndex)



; Read saved file if it exists--------
If FileExists($sListFile2) Then
$sListData2 = FileRead($sListFile2)
EndIf




; Load data read from the file
GUICtrlSetData($List2, $sListData2)
_GUICtrlListBox_SetCurSel($List2, $iIndex)


; Read saved file if it exists--------
If FileExists($sListFile3) Then
$sListData3 = FileRead($sListFile3)
EndIf




; Load data read from the file
GUICtrlSetData($List3, $sListData3)
_GUICtrlListBox_SetCurSel($List3, $iIndex)

; Read saved file if it exists--------
If FileExists($sListFile4) Then
$sListData4 = FileRead($sListFile4)
EndIf




; Load data read from the file
GUICtrlSetData($List4, $sListData4)
_GUICtrlListBox_SetCurSel($List4, $iIndex)


; Read saved file if it exists--------
If FileExists($sListFile5) Then
$sListData5 = FileRead($sListFile5)
EndIf



; Load data read from the file
GUICtrlSetData($List5, $sListData5)
_GUICtrlListBox_SetCurSel($List5, $iIndex)




; Read saved file if it exists--------
If FileExists($sListFile6) Then
$sListData6 = FileRead($sListFile6)
EndIf

; Load data read from the file
GUICtrlSetData($List6, $sListData6)
_GUICtrlListBox_SetCurSel($List6, $iIndex)

; Read saved file if it exists--------
If FileExists($sListFile7) Then
$sListData7 = FileRead($sListFile7)
EndIf

; Load data read from the file
GUICtrlSetData($List7, $sListData7)
_GUICtrlListBox_SetCurSel($List7, $iIndex)




; Read saved file if it exists--------
If FileExists($sListFile8) Then
$sListData8 = FileRead($sListFile8)
EndIf

; Load data read from the file
GUICtrlSetData($List8, $sListData8)
_GUICtrlListBox_SetCurSel($List8, $iIndex)



; Read saved file if it exists--------
If FileExists($sListFile9) Then
$sListData9 = FileRead($sListFile9)
EndIf

; Load data read from the file
GUICtrlSetData($List9, $sListData9)
_GUICtrlListBox_SetCurSel($List9, $iIndex)


; Read saved file if it exists--------
If FileExists($sListFile10) Then
$sListData10 = FileRead($sListFile10)
EndIf

EndFunc
Now you only run the code when you select the "Open" menu item and not every pass through the loop. :)

Next, you get the filename in the lists because that is what you set as the default content:

Global $iIndex = 0, $sListData1 = ($1newfile & ("1")) ; <<<<<<<<<<
Global $sListFile1 = ($1newfile & ("1"))
When you try to read the file, you only reset that default value if the file exists:

; Read saved file if it exists--------
If FileExists($sListFile1) Then
$sListData1 = FileRead($sListFile1) ; Only reset here
EndIf

; Load data read from the file
GUICtrlSetData($List1, $sListData1) ; So if the file does not exist you still have the default (filename) you set earlier
_GUICtrlListBox_SetCurSel($List1, $iIndex)
I suggest you add some errorchecking to see if the file you are trying to open is indeed opened - I suggest something like this:

; Read saved file if it exists--------
If FileExists($sListFile1) Then
$sListData1 = FileRead($sListFile1)
Else
MsgBox($MB_SYSTEMMODAL, "Error", $sListFile1 & " does not exist") ; <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
EndIf
Now you can tell if you trying to open the correct files and if you succeeded.

Try that and see what you get returned in those message boxes - I think you will find that you are not trying to open the files that you think you are. ;)

M23

Public_Domain.png.2d871819fcb9957cf44f4514551a2935.png Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind

Open spoiler to see my UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Link to comment
Share on other sites

Thank you so much this was the solution:

Global $iIndex = 0, $sListData1 = ($1newfile & ("1.txt"))
Global $sListFile1 = ($1newfile & ("1.txt"))

Global $iIndex = 0, $sListData2 = ($1newfile & ("2.txt"))
Global $sListFile2 = ($1newfile & ("2.txt"))

Global $iIndex = 0, $sListData3 = ($1newfile & ("3.txt"))
Global $sListFile3 = ($1newfile & ("3.txt"))

Global $iIndex = 0, $sListData4 = ($1newfile & ("4.txt"))
Global $sListFile4 = ($1newfile & ("4.txt"))

Global $iIndex = 0, $sListData5 = ($1newfile & ("5.txt"))
Global $sListFile5 = ($1newfile & ("5.txt"))

Global $iIndex = 0, $sListData6 = ($1newfile & ("6.txt"))
Global $sListFile6 = ($1newfile & ("6.txt"))

Global $iIndex = 0, $sListData7 = ($1newfile & ("7.txt"))
Global $sListFile7 = ($1newfile & ("7.txt"))

Global $iIndex = 0, $sListData8 = ($1newfile & ("8.txt"))
Global $sListFile8 = ($1newfile & ("8.txt"))

Global $iIndex = 0, $sListData9 = ($1newfile & ("9.txt"))
Global $sListFile9 = ($1newfile & ("9.txt"))

Global $iIndex = 0, $sListData10 = ($1newfile & ("10.txt"))
Global $sListFile10 = ($1newfile & ("10.txt"))

Global $iIndex = 0, $sListData11 = ($1newfile & ("11.txt"))
Global $sListFile11 = ($1newfile & ("11.txt"))

Global $iIndex = 0, $sListData12 = ($1newfile & ("12.txt"))
Global $sListFile12 = ($1newfile & ("12.txt"))

Global $iIndex = 0, $sListData13 = ($1newfile & ("13.txt"))
Global $sListFile13 = ($1newfile & ("13.txt"))

thank you very much melba :thumbsup:  :thumbsup:

Link to comment
Share on other sites

  • Moderators

Arclite86,

Delighted that I could help. :)

M23

Public_Domain.png.2d871819fcb9957cf44f4514551a2935.png Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind

Open spoiler to see my UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Link to comment
Share on other sites

I suggest you post your full code again, so that it can be seen where this other function is located.

Make sure brain is in gear before opening mouth!
Remember, what is not said, can be just as important as what is said.

Spoiler

What is the Secret Key? Life is like a Donut

If I put effort into communication, I expect you to read properly & fully, or just not comment.
Ignoring those who try to divert conversation with irrelevancies.
If I'm intent on insulting you or being rude, I will be obvious, not ambiguous about it.
I'm only big and bad, to those who have an over-active imagination.

I may have the Artistic Liesense ;) to disagree with you. TheSaint's Toolbox (be advised many downloads are not working due to ISP screwup with my storage)

userbar.png

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...