Sign in to follow this  
Followers 0
UEZ

AutoIt Sysinternal Tools Synchronizer v0.99.0 build 2015-06-11 beta

25 posts in this topic




Nice work UEZ ! 

1 - NoFocusLines.au3 file is missing in the source directory.

2 - #include <WinAPIMisc.au3> is needed to the include list.

3 - only those includes lines are needed :

 

#include <ButtonConstants.au3>
#include <Date.au3>
#include <GUIConstantsEx.au3>
#include <GUIListView.au3>
#include <GDIPlus.au3>
#include <GUIMenu.au3>
#include <GUIRichEdit.au3>
#include <InetConstants.au3>
#include <Misc.au3>
#include <StaticConstants.au3>
#include <WinAPIProc.au3>
#include <WinAPISys.au3>
#include <WinAPIvkeysConstants.au3>
#include <WinAPIMisc.au3>
#include "NoFocusLines.au3"
 
I will try now !  ;)

AutoIt 3.3.14.2 X86 - SciTE 3.6.0WIN 8.1 X64 - Other Example Scripts

Share this post


Link to post
Share on other sites

Indeed, totally forgot it to include to the 7-Zip archive -> updated the archive - should work now when starting from the code.

Thanks wakillon.  :thumbsup:

Br,

UEZ


Please don't send me any personal message and ask for support! I will not reply!

Selection of finest graphical examples at Codepen.io

The own fart smells best!
Her 'sikim hıyar' diyene bir avuç tuz alıp koşma!
¯\_(ツ)_/¯  ٩(●̮̮̃•̃)۶ ٩(-̮̮̃-̃)۶ૐ

Share this post


Link to post
Share on other sites

Hum, using the source i get a little problem with the selection of the folder.


AutoIt 3.3.14.2 X86 - SciTE 3.6.0WIN 8.1 X64 - Other Example Scripts

Share this post


Link to post
Share on other sites

#5 ·  Posted (edited)

Hmm, access violation!? I cannot reproduce the error. When does it appear? Just after when you have pressed the folder button or when have selected the folder?

Somebody else with the same problem?

Br,

UEZ

Edited by UEZ

Please don't send me any personal message and ask for support! I will not reply!

Selection of finest graphical examples at Codepen.io

The own fart smells best!
Her 'sikim hıyar' diyene bir avuç tuz alıp koşma!
¯\_(ツ)_/¯  ٩(●̮̮̃•̃)۶ ٩(-̮̮̃-̃)۶ૐ

Share this post


Link to post
Share on other sites

Hmm, access violation!? I cannot reproduce the error. When does it appear? Just after when you have pressed the folder button or when have selected the folder?

Br,

UEZ

 

When i have selected the folder

AppCrash didn't appear with the executable.


AutoIt 3.3.14.2 X86 - SciTE 3.6.0WIN 8.1 X64 - Other Example Scripts

Share this post


Link to post
Share on other sites

Can you try to comment out the #RequireAdmin line and test it again please?

Br,

UEZ


Please don't send me any personal message and ask for support! I will not reply!

Selection of finest graphical examples at Codepen.io

The own fart smells best!
Her 'sikim hıyar' diyene bir avuç tuz alıp koşma!
¯\_(ツ)_/¯  ٩(●̮̮̃•̃)۶ ٩(-̮̮̃-̃)۶ૐ

Share this post


Link to post
Share on other sites

Can you try to comment out the #RequireAdmin line and test it again please?

Br,

UEZ

 

Sorry  :ermm:


AutoIt 3.3.14.2 X86 - SciTE 3.6.0WIN 8.1 X64 - Other Example Scripts

Share this post


Link to post
Share on other sites

#9 ·  Posted (edited)

That's odd. :huh2:

It seems that you are using Windows 7. I will try later in my Win7 virtual machine.

Merci.

 

Edit: just tested it in my Win7 vm and not crashed when started the au3 file by double click or from SciTE directly. Somebody else with the same problem?

Br,

UEZ

Edited by UEZ

Please don't send me any personal message and ask for support! I will not reply!

Selection of finest graphical examples at Codepen.io

The own fart smells best!
Her 'sikim hıyar' diyene bir avuç tuz alıp koşma!
¯\_(ツ)_/¯  ٩(●̮̮̃•̃)۶ ٩(-̮̮̃-̃)۶ૐ

Share this post


Link to post
Share on other sites

#10 ·  Posted (edited)

On Win8.1x64, trying with the Beta again, i have created a folder "UEZ" to the root of the disk, but i can't select it, button stay greyed...

Capture  :ermm:

Edited by wakillon

AutoIt 3.3.14.2 X86 - SciTE 3.6.0WIN 8.1 X64 - Other Example Scripts

Share this post


Link to post
Share on other sites

Thank you as always, UEZ!

This looks really good. Prior, I personally always used their live location: live.sysinternals.comtools

But an automated way to download these will prove to be very useful!

Thanks!

Share this post


Link to post
Share on other sites

It worked fine for me, but did fail on several downloads.

sync.jpg

Cool GUI overlay and gears!  :)

Ian


My projects:

  • IP Scanner - Multi-threaded ping tool to scan your available networks for used and available IP addresses, shows ping times, resolves IPs in to host names, and allows individual IPs to be pinged.
  • INFSniff - Great technicians tool - a tool which scans DriverPacks archives for INF files and parses out the HWIDs to a database file, and rapidly scans the local machine's HWIDs, searches the database for matches, and installs them.
  • PPK3 (Persistent Process Killer V3) - Another for the techs - suppress running processes that you need to keep away, helpful when fighting spyware/viruses.
  • Sync Tool - Folder sync tool with lots of real time information and several checking methods.
  • USMT Front End - Front End for Microsoft's User State Migration Tool, including all files needed for USMT 3.01 and 4.01, 32 bit and 64 bit versions.
  • Audit Tool - Computer audit tool to gather vital hardware, Windows, and Office information for IT managers and field techs. Capabilities include creating a customized site agent.
  • CSV Viewer - Displays CSV files with automatic column sizing and font selection. Lines can also be copied to the clipboard for data extraction.
  • MyDirStat - Lists number and size of files on a drive or specified path, allows for deletion within the app.
  • 2048 Game - My version of 2048, fun tile game.
  • Juice Lab - Ecigarette liquid making calculator.
  • Data Protector - Secure notes to save sensitive information.
  • VHD Footer - Add a footer to a forensic hard drive image to allow it to be mounted or used as a virtual machine hard drive.
  • Find in File - Searches files containing a specified phrase.

Share this post


Link to post
Share on other sites

@llewxam: if you visit http://live.sysinternals.com/ and try to download the failed files you will see that you will get an error (at least for me):

Server Error
404 - File or directory not found. The resource you are looking for might have been removed, had its name changed, or is temporarily unavailable.

 

What I see in your screenshot is that the RTF GUI look different. On my system I don't have the light grey lines! Is aero disabled?

Br,

UEZ


Please don't send me any personal message and ask for support! I will not reply!

Selection of finest graphical examples at Codepen.io

The own fart smells best!
Her 'sikim hıyar' diyene bir avuç tuz alıp koşma!
¯\_(ツ)_/¯  ٩(●̮̮̃•̃)۶ ٩(-̮̮̃-̃)۶ૐ

Share this post


Link to post
Share on other sites

On Win8.1x64, trying with the Beta again, i have created a folder "UEZ" to the root of the disk, but i can't select it, button stay greyed...

Capture  :ermm:

 

I tried the same thing (running the exe and from SciTE) but not problem to selected the folder in the root.

 

Br,

UEZ


Please don't send me any personal message and ask for support! I will not reply!

Selection of finest graphical examples at Codepen.io

The own fart smells best!
Her 'sikim hıyar' diyene bir avuç tuz alıp koşma!
¯\_(ツ)_/¯  ٩(●̮̮̃•̃)۶ ٩(-̮̮̃-̃)۶ૐ

Share this post


Link to post
Share on other sites

I tried the same thing (running the exe and from SciTE) but not problem to selected the folder in the root.

 

Br,

UEZ

 

Well, since last crash i have tried to find a solution.

And when i "detach" the  FileSelectFolder from his parent gui, and after several tries it seems to work !  :sweating:

$sLocalPath = FileSelectFolder("Folder selection", "::{20D04FE0-3AEA-1069-A2D8-08002B30309D}", 0, "" ) ;, $hGUI)

1 person likes this

AutoIt 3.3.14.2 X86 - SciTE 3.6.0WIN 8.1 X64 - Other Example Scripts

Share this post


Link to post
Share on other sites

#16 ·  Posted (edited)

Updated to v0.91 build 2014-11-07 beta. 

@wakillon: can you try again please? I don't know whether this is a bug that FileSelectFolder line crashes on your system. As mentioned I cannot reproduce it.

 

@llewxam: the RTF GUI shouldn't have the light grey background yet. It was cause by _WinAPI_AnimateWindow() function.

 

Merci.

 

Br,

UEZ

Edited by UEZ

Please don't send me any personal message and ask for support! I will not reply!

Selection of finest graphical examples at Codepen.io

The own fart smells best!
Her 'sikim hıyar' diyene bir avuç tuz alıp koşma!
¯\_(ツ)_/¯  ٩(●̮̮̃•̃)۶ ٩(-̮̮̃-̃)۶ૐ

Share this post


Link to post
Share on other sites

I have take my time for do several tries with your last version and there is no more AppCrash !  :thumbsup:

Nicely done, but i'was a bit disappointed by your About... :P


AutoIt 3.3.14.2 X86 - SciTE 3.6.0WIN 8.1 X64 - Other Example Scripts

Share this post


Link to post
Share on other sites

I wrote:

I've still some ideas to implement which are more gimmick related, so it is not finished yet...

Guess why?

Btw, thank you very much for testing!

Br,

UEZ ;)


Please don't send me any personal message and ask for support! I will not reply!

Selection of finest graphical examples at Codepen.io

The own fart smells best!
Her 'sikim hıyar' diyene bir avuç tuz alıp koşma!
¯\_(ツ)_/¯  ٩(●̮̮̃•̃)۶ ٩(-̮̮̃-̃)۶ૐ

Share this post


Link to post
Share on other sites

Yeah, the GUI looks much better now.  I wondered if what I was seeing was what you intended  :P   VERY slick.

Ian


My projects:

  • IP Scanner - Multi-threaded ping tool to scan your available networks for used and available IP addresses, shows ping times, resolves IPs in to host names, and allows individual IPs to be pinged.
  • INFSniff - Great technicians tool - a tool which scans DriverPacks archives for INF files and parses out the HWIDs to a database file, and rapidly scans the local machine's HWIDs, searches the database for matches, and installs them.
  • PPK3 (Persistent Process Killer V3) - Another for the techs - suppress running processes that you need to keep away, helpful when fighting spyware/viruses.
  • Sync Tool - Folder sync tool with lots of real time information and several checking methods.
  • USMT Front End - Front End for Microsoft's User State Migration Tool, including all files needed for USMT 3.01 and 4.01, 32 bit and 64 bit versions.
  • Audit Tool - Computer audit tool to gather vital hardware, Windows, and Office information for IT managers and field techs. Capabilities include creating a customized site agent.
  • CSV Viewer - Displays CSV files with automatic column sizing and font selection. Lines can also be copied to the clipboard for data extraction.
  • MyDirStat - Lists number and size of files on a drive or specified path, allows for deletion within the app.
  • 2048 Game - My version of 2048, fun tile game.
  • Juice Lab - Ecigarette liquid making calculator.
  • Data Protector - Secure notes to save sensitive information.
  • VHD Footer - Add a footer to a forensic hard drive image to allow it to be mounted or used as a virtual machine hard drive.
  • Find in File - Searches files containing a specified phrase.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0

  • Similar Content

    • AndyS19
      By AndyS19
      I have a listview with 3 columns and I want to set the 3rd column's color based on the item's 'Param' value, but even though I set up for the 3rd column, the entire row always gets the color.
      My test code is below, but here is the pertinent code:
      Func WM_NOTIFY($hWnd, $iMsg, $iwParam, $ilParam) #forceref $hWnd, $iMsg, $iwParam, $ilParam Local $hWndFrom, $iCode, $tNMHDR $tNMHDR = DllStructCreate($tagNMHDR, $ilParam) $hWndFrom = HWnd(DllStructGetData($tNMHDR, "hWndFrom")) $iCode = DllStructGetData($tNMHDR, "Code") Switch $hWndFrom Case $hListView Switch $iCode Case $NM_CUSTOMDRAW Local $iDrawStage, $tCustDraw $tCustDraw = DllStructCreate($tagNMLVCUSTOMDRAW, $ilParam) $iDrawStage = DllStructGetData($tCustDraw, 'dwDrawStage') Switch $iDrawStage Case BitOR(0, $CDDS_ITEMPREPAINT) ;, $CDDS_SUBITEM) setItemColor($tCustDraw, $hWndFrom) Return $CDRF_NOTIFYSUBITEMDRAW EndSwitch EndSwitch EndSwitch Return $GUI_RUNDEFMSG EndFunc ;==>WM_NOTIFY Func setItemColor($tCustDraw, $hWnd) Local $iIndex, $color, $iSubitem $iIndex = DllStructGetData($tCustDraw, 'dwItemSpec') ; item number $color = _GUICtrlListView_GetItemParam($hWnd, $iIndex) $iSubitem = DllStructGetData($tCustDraw, 'iSubItem') ; Here, I want to only change the color of the 3rd col, and not the 1st and 2nd cols DllStructSetData($tCustDraw, 'iSubItem', 2) ; always use the 3rd column (the 'sample' col) logmsg("+++: setItemColor($tCustDraw, 0x" & Hex($hWnd) & ") entered ... " _ & ", $iIndex = " & $iIndex & ", $iSubItem = " & $iSubitem & ", $color = " & Hex($color)) DllStructSetData($tCustDraw, 'clrText', $color) ; set the Text color DllStructSetData($tCustDraw, 'clrTextBk', bitnot($color)) ; set the background color EndFunc ;==>setItemColor Func logmsg($msg, $lnum = @ScriptLineNumber) ConsoleWrite("+++:" & $lnum & ": " & $msg & @CRLF) EndFunc ;==>logmsg
      Here is the full test code:
      #include-once ;#cs #NoTrayIcon #AutoIt3Wrapper_UseUpx=n #AutoIt3Wrapper_Au3Check_Parameters=-d -w 1 -w 2 -w 3 -w 4 -w 5 -w 6 #AutoIt3Wrapper_UseX64=N Opt("GUICloseOnESC", 1) ; ESC closes GUI? (0 = no, 1 = yes) Opt("GUIOnEventMode", 1) ; Change to OnEvent mode Opt('MustDeclareVars', 1) OnAutoItExitRegister("_test_exit") Opt("GUIEventOptions", 1) ;0=default, 1=just notification, 2=GuiCtrlRead tab index Opt("WinTitleMatchMode", -2) ;1=start, 2=subStr, 3=exact, 4=advanced, -1 to -4=Nocase #include <GuiListBox.au3> #include <ListViewConstants.au3> #include <GuiListView.au3> #include <WindowsConstants.au3> #include <GUIConstantsEx.au3> #include <ColorConstants.au3> Global $__MCP_obj, $__MCP_GUI_hWnd, $idListView, $hListView Global $hMainWin test() Exit Func test() $hMainWin = GUICreate("Test window", 120, 100, @DesktopWidth / 2, -1) GUICtrlCreateButton("Hwnd", 10, 10, 40, 20) GUICtrlSetOnEvent(-1, "handle_1stTEST_btn") GUICtrlCreateButton("ID", 50, 10, 40, 20) GUICtrlSetOnEvent(-1, "handle_2ndTEST_btn") GUISetOnEvent($GUI_EVENT_CLOSE, "_test_exit") GUISetState(@SW_SHOW) While (1) Sleep(17) WEnd EndFunc ;==>test Func _myColorPicker($obj) logmsg("+++: $obj = 0x" & Hex($obj) & @CRLF) Local $flags = 0 Local $ww, $wh, $x, $y, $w, $h $__MCP_obj = $obj $ww = 350 $wh = 500 $x = 200 $y = 150 $__MCP_GUI_hWnd = GUICreate("myColorPicker", $ww, $wh, $x, $y, $flags) $x = 10 $y = 10 $w = 150 $h = 20 GUICtrlCreateButton("Set caller's color", $x, $y, $w, $h) GUICtrlSetOnEvent(-1, "__MCP_handle_SetColor_btn") $y += $h + 5 $w = $ww - 25 $h = $wh - 100 $idListView = GUICtrlCreateListView("", $x, $y, $w, $h, -1, BitOR($LVS_EX_GRIDLINES, $LVS_EX_FULLROWSELECT)) $hListView = GUICtrlGetHandle($idListView) $x = $ww / 2 - 50 $y = $wh - 60 $w = 100 $h = 25 GUICtrlCreateButton("Quit Popup", $x, $y, $w, $h) GUICtrlSetOnEvent(-1, "__MCP_handle_QUIT_btn") GUICtrlSetFont($idListView, 8.5, -1, -1, "courier new") _GUICtrlListView_AddColumn($idListView, "Name", 100) _GUICtrlListView_AddColumn($idListView, "Value", 100) _GUICtrlListView_AddColumn($idListView, "Sample", 100) _GUICtrlListView_SetColumnWidth($idListView, 0, 100) _GUICtrlListView_SetColumnWidth($idListView, 1, 80) logmsg("+++: $idListView = " & $idListView) logmsg("+++: $hListView = 0x" & Hex($hListView)) __MCP_populateListView($hListView) GUIRegisterMsg($WM_NOTIFY, "WM_NOTIFY") GUISetState(@SW_SHOW, $__MCP_GUI_hWnd) EndFunc ;==>_myColorPicker Func WM_NOTIFY($hWnd, $iMsg, $iwParam, $ilParam) #forceref $hWnd, $iMsg, $iwParam, $ilParam Local $hWndFrom, $iCode, $tNMHDR $tNMHDR = DllStructCreate($tagNMHDR, $ilParam) $hWndFrom = HWnd(DllStructGetData($tNMHDR, "hWndFrom")) $iCode = DllStructGetData($tNMHDR, "Code") Switch $hWndFrom Case $hListView Switch $iCode Case $NM_CUSTOMDRAW Local $iDrawStage, $tCustDraw $tCustDraw = DllStructCreate($tagNMLVCUSTOMDRAW, $ilParam) $iDrawStage = DllStructGetData($tCustDraw, 'dwDrawStage') Switch $iDrawStage Case BitOR(0, $CDDS_ITEMPREPAINT) ;, $CDDS_SUBITEM) setItemColor($tCustDraw, $hWndFrom) Return $CDRF_NOTIFYSUBITEMDRAW EndSwitch EndSwitch EndSwitch Return $GUI_RUNDEFMSG EndFunc ;==>WM_NOTIFY Func setItemColor($tCustDraw, $hWnd) Local $iIndex, $color, $iSubitem $iIndex = DllStructGetData($tCustDraw, 'dwItemSpec') ; item number $color = _GUICtrlListView_GetItemParam($hWnd, $iIndex) $iSubitem = DllStructGetData($tCustDraw, 'iSubItem') ; Here, I want to only change the color of the 3rd col, and not the 1st and 2nd cols DllStructSetData($tCustDraw, 'iSubItem', 2) ; always use the 3rd column (the 'sample' col) logmsg("+++: setItemColor($tCustDraw, 0x" & Hex($hWnd) & ") entered ... " _ & ", $iIndex = " & $iIndex & ", $iSubItem = " & $iSubitem & ", $color = " & Hex($color)) DllStructSetData($tCustDraw, 'clrText', $color) ; set the Text color DllStructSetData($tCustDraw, 'clrTextBk', bitnot($color)) ; set the background color EndFunc ;==>setItemColor Func logmsg($msg, $lnum = @ScriptLineNumber) ConsoleWrite("+++:" & $lnum & ": " & $msg & @CRLF) EndFunc ;==>logmsg Func __MCP_exit() GUIDelete($__MCP_GUI_hWnd) EndFunc ;==>__MCP_exit Func __MCP_handle_SetColor_btn() If (IsHWnd($__MCP_obj)) Then GUISetBkColor($COLOR_BLUE, $__MCP_obj) Else GUICtrlSetBkColor($__MCP_obj, $COLOR_BLUE) EndIf EndFunc ;==>__MCP_handle_SetColor_btn Func __MCP_populateListView($hWnd) Local $text, $parts, $iIndex Local Static $aItems[] = [ _ "BLACK | " & $CLR_BLACK & "|" & "", _ "BLUE | " & $CLR_BLUE & "|" & "", _ "RED | " & $CLR_RED & "|" & "", _ "WHITE | " & $CLR_WHITE & "|" & "", _ "YELLOW | " & $CLR_YELLOW & "|" & "" _ ] _GUICtrlListView_BeginUpdate($hWnd) _GUICtrlListView_DeleteAllItems($hWnd) For $ndx = 0 To UBound($aItems) - 1 $text = $aItems[$ndx] $parts = StringSplit($text, "|", 2) $parts[0] = StringStripWS($parts[0], 3) $parts[2] = StringStripWS($parts[2], 3) $iIndex = _GUICtrlListView_AddItem($hWnd, $parts[0], -1, $parts[1]) _GUICtrlListView_AddSubItem($hWnd, $iIndex, Hex($parts[1]), 1) _GUICtrlListView_AddSubItem($hWnd, $iIndex, $parts[0], 2) Next _GUICtrlListView_EndUpdate($hWnd) EndFunc ;==>__MCP_populateListView Func __MCP_handle_QUIT_btn() GUIDelete($__MCP_GUI_hWnd) EndFunc ;==>__MCP_handle_QUIT_btn Func handle_1stTEST_btn() _myColorPicker($hMainWin) EndFunc ;==>handle_1stTEST_btn Func handle_2ndTEST_btn() _myColorPicker(@GUI_CtrlId) EndFunc ;==>handle_2ndTEST_btn Func _test_exit() Exit EndFunc ;==>_test_exit  
    • timmalos
      By timmalos
      Hey all.
      I'm trying to know when my user clicks on a Rect drawn via GDI+. Everything is almost working except I have a strange behaviour in the "order" clicks are fired.
      I created a simplified code to help :
      #include <GDIPlus.au3> #include <GUIConstantsEx.au3> #include <WindowsConstants.au3> #include <StaticConstants.au3> #include <WinAPI.au3> #include <Array.au3> Opt("GUIOnEventMode", 1) ;0=disabled, 1=OnEvent mode enabled _GDIPlus_Startup() Global $hGUI, $hGraphics Global $iWidth = 1024, $iHeight = 762 createGUI() draw() While 1 Sleep(10) WEnd Func createGUI() $hGUI = GUICreate("Current CasparCG Output", $iWidth,$iHeight) GUISetOnEvent($GUI_EVENT_CLOSE, "SpecialEvents") GUISetBkColor(0x000000) GUISetState(@SW_SHOW) $hGraphics = _GDIPlus_GraphicsCreateFromHWND($hGUI) _GDIPlus_GraphicsSetSmoothingMode($hGraphics, $GDIP_SMOOTHINGMODE_HIGHQUALITY) ;sets the graphics object rendering quality (antialiasing) EndFunc ;==>Example Func draw() ;_WinAPI_draw($hGUI,"","",BitOR($RDW_ERASE,$RDW_INVALIDATE,$RDW_UPDATENOW)) _GDIPlus_GraphicsClear($hGraphics) $hFamily = _GDIPlus_FontFamilyCreate("Arial") $hFont = _GDIPlus_FontCreate($hFamily, 15, 1) $hPen = _GDIPlus_PenCreate(0xFFFEDCFF, 2) ;color format AARRGGBB (hex) $hFormat = _GDIPlus_StringFormatCreate() _GDIPlus_StringFormatSetAlign($hFormat, 1) _GDIPlus_StringFormatSetLineAlign($hFormat, 1) $hBrushString = _GDIPlus_BrushCreateSolid(0xFFFFFFFF) Local $hBrush = _GDIPlus_BrushCreateSolid(0xFFFF00FF) ;color format AARRGGBB (hex) For $i = 1 to 2 Local $x = 0.25 Local $y = 0.25 Local $w = 0.5 Local $h = 0.5 Local $title = "Layer "&$i If $x >= -1 And $x <= 1 Then $x *= $iWidth If $y >= -1 And $y <= 1 Then $y *= $iHeight If $w >= -1 And $w <= 1 Then $w *= $iWidth If $h >= -1 And $h <= 1 Then $h *= $iHeight $hItem = GUICtrlCreateLabel("", $x,$y,$w,$h) GUICtrlSetBkColor(-1, $GUI_BKCOLOR_TRANSPARENT) GUICtrlSetOnEvent($hItem,"_gui_layer_clicked") ConsoleWrite("Created label with handle="&$hItem&" $i= " & $i&@CRLF) _GDIPlus_GraphicsFillRect($hGraphics, $x, $y, $w, $h,$hBrush) _GDIPlus_GraphicsDrawRect($hGraphics, $x, $y, $w, $h,$hPen) $tLayout = _GDIPlus_RectFCreate($x, $y, $w, $h) $aInfo = _GDIPlus_GraphicsMeasureString($hGraphics, $title, $hFont, $tLayout, $hFormat) _GDIPlus_GraphicsDrawStringEx($hGraphics, $title, $hFont, $aInfo[0], $hFormat, $hBrushString) Next _GDIPlus_BrushDispose($hBrush) _GDIPlus_PenDispose($hPen) _GDIPlus_FontDispose($hFont) _GDIPlus_StringFormatDispose($hFormat) _GDIPlus_FontFamilyDispose($hFamily) _GDIPlus_BrushDispose($hBrushString) Return 1 EndFunc Func _gui_layer_clicked() ConsoleWrite("Clicked on " & @GUI_CtrlId&@CRLF) EndFunc Func SpecialEvents() Select Case @GUI_CtrlId = $GUI_EVENT_CLOSE ; Clean up resources _GDIPlus_GraphicsDispose($hGraphics) _GDIPlus_Shutdown() Exit EndSelect EndFunc ;==>SpecialEvents What happens there :
      We have two rectangles, with the one labelled "2" is front and, the one labelled "1" in background. However when we click, the fired label is the one created first (in the background) and not the second one (in the front).
      Is it normal ?
      If yes, is there any way to change this order ? If I create another label after a first one on the same coords, I would the second one to be fired instead of the first one (This is a simplified code I can't just invert the label order creation easily)
       
      Thanks for your help
       
    • nacerbaaziz
      By nacerbaaziz
      Hello guys
      Today I'll give you three functions to manage the list View items
      These functions will help you to do some works in your list view items
      1. list view Read
      To get the selected item text  
      2. listView_checke
      To checke an item
      3. isListViewChecked
      To see if the item is checked
      All of these functions will be illustrated by the following example
      You can download the include file from the link below
      Now with the example
      #include <easy_listView_functions.au3> #include <GUIConstantsEx.au3> #include <GuiListView.au3> #include <MsgBoxConstants.au3> Example() Func Example()  Local $idListview  GUICreate("ListView Get Item Checked State", 1000, 700)  $idListview = GUICtrlCreateListView("", 50, 30, 250, 120, 50)  _GUICtrlListView_SetExtendedListViewStyle($idListview, BitOR($LVS_EX_FULLROWSELECT, $LVS_EX_CHECKBOXES)) ; Add items $item1 = GUICtrlCreateListViewItem("item1", $idListview) $item2 = GUICtrlCreateListViewItem("item2", $idListview) _listview_Checke($idListview, "item1") $btn = GUICtrlCreateButton("&read", 100, 150, 50, 50) $btn2 = GUICtrlCreateButton("&if checked", 100, 200, 100, 50)  GUISetState(@SW_SHOW) while 1 switch GUIGetMSG() case $GUI_EVENT_CLOSE  GUIDelete() exit case $btn $read = _ListView_read($idListView) if $read then msgBox(0, "read listview", $read) else msgBox(0, "read listview", "no text ditected") endIf case $btn2 if _isListviewChecked($idListView, "item1") then msgBox(0, "get", "the item is checked") else msgBox(0, "get", "the item isn't checked") endIf endSwitch wend EndFunc   ;==>Example
       
      easy_listView_functions.au3
    • InunoTaishou
      By InunoTaishou
      Struggling a bit to get this GDI+ function converted to AutoIt.
      #include <GDIPlus.au3> _GDIPlus_Startup() Global $hImage = _GDIPlus_ImageLoadFromFile("F:\DCIM\Camera\20170515_111804.jpg") Global $tBufferSize = DllStructCreate("uint") Global $tProperties = DllStructCreate("uint") _GDIPlus_GetPropertySize($hImage, $tBufferSize, $tProperties) Global $tAllItems = DllStructCreate("struct;char[" & DllStructGetData($tBufferSize, 1) & "];endstruct") _GDIPlus_GetAllPropertyItems($hImage, $tBufferSize, $tProperties, $tPropertyItem) _GDIPlus_ImageDispose($hImage) _GDIPlus_Shutdown() Func _GDIPlus_GetAllPropertyItems(ByRef $hImage, Const $tTotalBufferSize, Const $tNumProperties, ByRef $tAllItems) If (Not IsDllStruct($tPropertyItem)) Then Return SetError(-1, 0, "") Local $aResult = DllCall($__g_hGDIPDll, "int", "GdipGetAllPropertyItems", "hwnd", $hImage, "unit", DllStructGetData($tTotalBufferSize, 1), "uint", DllStructGetData($tNumProperties, 1), "ptr", DllStructGetPtr($tAllItems)) If (@error) Then Return SetError(@error, @extended, ConsoleWrite("@Error = " & @error & @LF)) If ($aResult[0]) Then Return SetError($aResult[0], @extended, "") Return $aResult[0] EndFunc ;==>_GDIPlus_GetAllPropertyItems Func _GDIPlus_GetPropertySize(Const ByRef $hImage, ByRef $tTotalBufferSize, ByRef $tNumProperties) If (Not IsDllStruct($tTotalBufferSize)) Then Return SetError(-1, 0, "") If (Not IsDllStruct($tNumProperties)) Then Return SetError(-2, 0, "") Local $aResult = DllCall($__g_hGDIPDll, "uint", "GdipGetPropertySize", "hwnd", $hImage, "uint_ptr", DllStructGetPtr($tTotalBufferSize), "uint_ptr", DllStructGetPtr($tNumProperties)) If (@error) Then Return SetError(@error, @extended, "") If ($aResult[0]) Then Return SetError($aResult[0], 0, "") Return $aResult[0] EndFunc ;==>_GDIPlus_GetPropertySize Got the GetPropertySize function to work, gives me the correct buffer size and the property count, but I cannot figure out how to get the struct for the all items.
      Function on MSDN:
      https://msdn.microsoft.com/en-us/library/windows/desktop/ms535372(v=vs.85).aspx
      Struct needed:
      PropertyItem class:
      https://msdn.microsoft.com/en-us/library/windows/desktop/ms534493(v=vs.85).aspx
      Found other topics about this function in other languages where they used a blank string as the buffer, so I tried using a char array, which doesn't work. Just cannot figure out how to create the struct buffer to hold the data.
    • dascondor
      By dascondor
      So I having issues with this GUI/Listview. My main GUI works like it needs to but the ListView GUIs don't. The exit buttons do not work on them and om have a hard time getting them to work. And I'm trying to make the  listview GUI resizeable. But I'm not sure how to fix either of these issues any thoughts.
      #include <ButtonConstants.au3> #include <EditConstants.au3> #include <GUIConstantsEx.au3> #include <StaticConstants.au3> #include <WindowsConstants.au3> #include <File.au3> #include <ScreenCapture.au3> #include <MsgBoxConstants.au3> #include <WinAPIFiles.au3> #include <Array.au3> #include <GuiListView.au3> #include <GuiImageList.au3> #include <ListviewConstants.au3> #include 'MultiPing.au3' Opt("GUIOnEventMode", 1) #Region ;Declares ; Reads text file for the base list of IP's Global $aBase_IPlist = _FileReadToArray_mod(".\IP_List.txt") Global $replace2 = "Second" Global $replace3 = "Thrid" ;Global $userdata1 = GUICtrlRead($data1) ;Global $userdata2 = GUICtrlRead($data2) Global $savefolder = "C:\Users\" Global $paths = "\Desktop\PingChecks" Global $1stpaths = "\~~~Store" Global $2ndpaths = "~~~" Global $results = FileExists($savefolder & @UserName & $paths) ;Global $foldercheck = FileExists($savefolder & @UserName & $paths & $1stpaths & $userdata1 & $userdata2 & $2ndpaths) ;Global $savefile = "C:\Users\" & @UserName & "\Desktop\PingChecks\~~~Store" & $userdata1 & $userdata2 & "~~~\" #EndRegion ;Declares #Region ### START Koda GUI section ### Form= $IPMonkey = GUICreate("IP Monkey", 573, 254, -1, -1) GUISetIcon("C:\Users\Dlex\Pictures\monkeyicon.ico", -1) GUISetFont(16, 800, 0, "Arial") GUISetBkColor(0xFFFFFF) GUISetOnEvent($GUI_EVENT_CLOSE, "SpecialEvents") GUISetOnEvent($GUI_EVENT_MINIMIZE, "SpecialEvents") GUISetOnEvent($GUI_EVENT_MAXIMIZE, "SpecialEvents") GUISetOnEvent($GUI_EVENT_RESTORE, "SpecialEvents") $data1 = GUICtrlCreateInput("1", 184, 120, 89, 32, BitOR($GUI_SS_DEFAULT_INPUT, $ES_CENTER)) GUICtrlSetColor(-1, 0x000000) $data2 = GUICtrlCreateInput("23", 280, 120, 89, 32, BitOR($GUI_SS_DEFAULT_INPUT, $ES_CENTER)) GUICtrlSetColor(-1, 0x000000) $GOButton = GUICtrlCreateButton("GO", 80, 192, 75, 25) GUICtrlSetFont(-1, 10, 800, 0, "Arial") GUICtrlSetColor(-1, 0x000000) GUICtrlSetBkColor(-1, 0x00FF00) GUICtrlSetTip(-1, "Runs A Live Continuous Ping" & @CRLF & _ "Until Told Other Wise") GUICtrlSetOnEvent(-1, "GOButtonClick") $quickscan = GUICtrlCreateButton("Quick Scan", 224, 192, 107, 25) GUICtrlSetFont(-1, 12, 800, 0, "Arial") GUICtrlSetColor(-1, 0x000000) GUICtrlSetBkColor(-1, 0xFFFF00) GUICtrlSetOnEvent(-1, "quickscanClick") GUICtrlSetTip(-1, "Quickly Scans, Then Saves" & @CRLF & _ "Results In Your 'PingChecks' " & @CRLF & _ "Folder Under Your Store Number Folder") Global $exitbutton = GUICtrlCreateButton("Exit", 416, 192, 75, 25) GUICtrlSetFont(-1, 12, 800, 0, "Arial") GUICtrlSetColor(-1, 0x000000) GUICtrlSetBkColor(-1, 0xFF0000) GUICtrlSetTip(-1, "What Do You Think This Button Does?") GUICtrlSetOnEvent(-1, "exitbuttonClick") $titlebar = GUICtrlCreateLabel("IP Monkey", 16, 120, 107, 28) GUICtrlSetColor(-1, 0x000000) $Pic1 = GUICtrlCreatePic("C:\Users\Dlex\Pictures\monkeyicon-0.jpg", 16, 16, 100, 100) GUICtrlSetOnEvent(-1, "Pic1Click") $infobutton = GUICtrlCreateButton("?", 536, 8, 27, 25) GUICtrlSetColor(-1, 0x000000) GUICtrlSetBkColor(-1, 0xFF8000) GUICtrlSetTip(-1, "Unsure what to do?" & @CRLF & _ "This will get give you " & @CRLF & _ "the help for IP Monkey") GUICtrlSetOnEvent(-1, "infobuttonClick") $Whatstorelabel = GUICtrlCreateLabel("What Store?", 208, 56, 130, 28) GUICtrlSetColor(-1, 0x000000) GUISetState(@SW_SHOW) #EndRegion ### END Koda GUI section ### #Region ;ping gui ; ------ pinger GUI ------------------- Global $StopPing = 0 Local $Win_X = 1200, $Win_Y = 880 ; dimension of window Global $PingGui = GUICreate("IP Monkey", $Win_X, $Win_Y, -1, -1) GUISetOnEvent($GUI_EVENT_CLOSE, "SpecialEvents") Global $listview = GUICtrlCreateListView("", 10, 10, $Win_X - 20, $Win_Y - 40) GUICtrlSetFont(-1, 8) $button1 = GUICtrlCreateLabel("Hit Exit To Quit", 10, $Win_Y - 25, $Win_X - 20, 20, -1,$ES_CENTER) GUICtrlSetFont(-1, 10, 800) GUICtrlSetTip(-1, "exit") GUICtrlSetOnEvent(-1, 'SpecialEvents') GUICtrlSetStyle($listview, $LVS_ICON) ; + $LVS_NOLABELWRAP) GUISetState(@SW_HIDE) ; hidden at startup ; --------- end of pinger gui ------------- #EndRegion ;ping gui ; Generate colored square images $hImage = _GUIImageList_Create(30, 30) _GUIImageList_Add($hImage, _GUICtrlListView_CreateSolidBitMap($listview, 0xFFFF00, 30, 30)) ; yellow _GUIImageList_Add($hImage, _GUICtrlListView_CreateSolidBitMap($listview, 0xFF0000, 30, 30)) ; red _GUIImageList_Add($hImage, _GUICtrlListView_CreateSolidBitMap($listview, 0x00FF00, 30, 30)) ; green _GUICtrlListView_SetImageList($listview, $hImage, 0) While 1 Sleep(100) WEnd Func exitbuttonClick() MsgBox(0,'0','0') Exit EndFunc ;==>exitbuttonClick Func GOButtonClick() $userdata1 = GUICtrlRead($data1) $userdata2 = GUICtrlRead($data2) ; pass the wanted new octet replace_And_Go($userdata1, $userdata2) ; generate a list of new IP and Go EndFunc ;==>GOButtonClick Func infobuttonClick() EndFunc ;==>infobuttonClick Func Pic1Click() EndFunc ;==>Pic1Click Func quickscanClick() $userdata1 = GUICtrlRead($data1) $userdata2 = GUICtrlRead($data2) replace_And_Go2($userdata1, $userdata2) EndFunc ;==>quickscanClick Func SpecialEvents() Select Case @GUI_CtrlId = $GUI_EVENT_CLOSE _button1() Case @GUI_CtrlId = $GUI_EVENT_MINIMIZE Case @GUI_CtrlId = $GUI_EVENT_RESTORE Case @GUI_CtrlId = $GUI_EVENT_MAXIMIZE EndSelect EndFunc ;==>SpecialEvents #Region ; Main_GO/Replace_and_GO #cs ############################## second script ############################################# ; this is to ping continuously a list of IP addresses, get and display ping result "live" ; it simulates the dos "ping -t" command but performed simultaneously on many IP ; presenting the results in a ListView highlighting not responding devices with a red box #ce Func replace_And_Go($s_2, $s_3) ; Create a new array wit a new list of IP according to passed second and third octet Local $aNew_IPlist = $aBase_IPlist For $i = 0 To UBound($aNew_IPlist) - 1 $aNew_IPlist[$i][1] = StringReplace(StringReplace($aBase_IPlist[$i][1], $replace2, $s_2), $replace3, $s_3) Next GUISetState(@SW_HIDE, $IPMonkey) GUISetState(@SW_SHOW, $PingGui) ; pass the new list to the pinger Main_GO($aNew_IPlist) GUISetState(@SW_HIDE, $PingGui) GUISetState(@SW_SHOW, $IPMonkey) EndFunc ;==>replace_And_Go Func Main_GO($IPlist) HotKeySet("{esc}", "exitbuttonClick") $StopPing = 0 ; $IPlist = _FileReadToArray_mod(".\IP_List.txt") ; Reads text file for list of IP's ; ; the above command, it loads in the $IPlist array the values contained in the file IP_List.txt ; values in the file should be separated by a semicolon, something like in the following example: ; ; hostname1;192.168.0.1 ; hostname2;192.168.0.5 ; hostnameX;10.59.7.200 ; etc.... ; ; if values in the file are not separated by a semicolon, but another char is used, for example a comma, ; then just pass it as second parameter of the function: $IPlist = _FileReadToArray_mod(".\IP_List.txt", ",") ; _GUICtrlListView_BeginUpdate($listview) _GUICtrlListView_DeleteAllItems($listview) _GUICtrlListView_AddArray($listview, $IPlist) ; fill ListView _GUICtrlListView_EndUpdate($listview) While Not $StopPing ; 1 ; continuously ping addresses of the previously loaded file (IP_List.txt) Sleep(10) ; ; $IPlist is the array loaded with all the IP to be pinged (a 2d array in this case) ; | ; | 1 means the IP are in the second column of the $IPlist array (first colun is nr. 0) ; | | ; | | +--> 0 means return back an array loaded with results from all pinged addresses (responding and not responding) ; | | | if you use 1 then only responding addresses are loaded in the returned array [default] ; | | | if you use 2 then only NOT responding addresses are loaded in the returned array ; | | | In this case we do not need an array to be returned, we only need to perform all pings and pass results ; | | | directly (on the fly) to the "_refresh" callback function that will refresh the listview ; | | | ; | | | 0 means NO lookup name resolution must be performed ; | | | | ; | | | | +--> this is the callback function to be called for each pinged address each time the ping has finished ; | | | | | (see the MultiPing.au3 file for info on all passed params) ; | | | | | 6 parameters are passed to this function, but only 2 are used by the called function in this case: ; | | | | | [4] roundtrip of the responding ping or -1 if IP is down ; | | | | | [5] Index (position) of this IP within the caller's passed array ; | | | | | ; v v v v v _nPing($IPlist, 1, 0, 0, "_refresh") WEnd EndFunc ;==>Main_GO #EndRegion ; Main_GO/Replace_and_GO #Region ; QuickScan/Replace_and_GO2 Func replace_And_Go2($s_2, $s_3) ; Create a new array wit a new list of IP according to passed second and third octet Local $aNew_IPlist = $aBase_IPlist For $i = 0 To UBound($aNew_IPlist) - 1 $aNew_IPlist[$i][1] = StringReplace(StringReplace($aBase_IPlist[$i][1], $replace2, $s_2), $replace3, $s_3) Next GUISetState(@SW_HIDE, $IPMonkey) GUISetState(@SW_SHOW, $PingGui) ; pass the new list to the pinger QuickRun($aNew_IPlist) GUISetState(@SW_HIDE, $PingGui) GUISetState(@SW_SHOW, $IPMonkey) EndFunc ;==>replace_And_Go2 Func QuickRun($IPlist) $userdata1 = GUICtrlRead($data1) $userdata2 = GUICtrlRead($data2) HotKeySet("{esc}", "_button1") Local $Win_X = 1200, $Win_Y = 880 ; dimension of window $PingGui = GUICreate("IP Monkey" & "~~~" & @UserName & "~~~" & "Store" & $userdata1 & $userdata2 & "~~~" & @MON & "." & @MDAY & "." & @YEAR & "~~~" & @HOUR & "." & @MIN, $Win_X, $Win_Y, -1, -1) GUISetOnEvent($GUI_EVENT_CLOSE, "_button1", $PingGui) $listview = GUICtrlCreateListView("", 10, 10, $Win_X - 20, $Win_Y - 40) GUICtrlSetFont(-1, 8) GUICtrlSetStyle($listview, $LVS_ICON) ; + $LVS_NOLABELWRAP) ; Generate colored square images $hImage = _GUIImageList_Create(30, 30) _GUIImageList_Add($hImage, _GUICtrlListView_CreateSolidBitMap($listview, 0xFFFF00, 30, 30)) ; yellow _GUIImageList_Add($hImage, _GUICtrlListView_CreateSolidBitMap($listview, 0xFF0000, 30, 30)) ; red _GUIImageList_Add($hImage, _GUICtrlListView_CreateSolidBitMap($listview, 0x00FF00, 30, 30)) ; green _GUICtrlListView_SetImageList($listview, $hImage, 0) $button1 = GUICtrlCreateButton("Exit", 10, $Win_Y - 25, $Win_X - 20, 20) GUICtrlSetTip(-1, "End of program") GUICtrlSetOnEvent(-1, "exitbuttonClick") GUISetState(@SW_SHOW) ;~ $IPlist = _FileReadToArray_mod(".\IP_List.txt") ; Reads text file for list of IP's _GUICtrlListView_BeginUpdate($listview) _GUICtrlListView_AddArray($listview, $IPlist) ; fill ListView _GUICtrlListView_EndUpdate($listview) ;While 1 ; perform Pings and update ListView by the "_refresh" callback function $aFinalResult = _nPing($IPlist, 1, 0, 0, "_refresh") ;~ _ArrayDisplay($aFinalResult) ;DirCheck() EndFunc ;==>QuickRun #EndRegion ; QuickScan/Replace_and_GO2 #Region ; Misc Funcs (network) Func _refresh($Params) ; this receive ping results and displays them in the ListView _GUICtrlListView_SetItemImage($listview, $Params[5], 0) ; set colour to Yellow Sleep(50) ; a little wait If $Params[4] = -1 Then ; Device not responding to ping _GUICtrlListView_SetItemImage($listview, $Params[5], 1) ; set colour to RED _GUICtrlListView_EnsureVisible($listview, $Params[5]) ; Position view to this item Else ; Device responds to ping _GUICtrlListView_SetItemImage($listview, $Params[5], 2) ; set colour to GREEN EndIf EndFunc ;==>_refresh Func _button1() ; Button 1 clicked ;~ $StopPing = 1 Exit EndFunc ;==>_button1 #EndRegion ; Misc Funcs (network)  
      MultiPing.au3
      IP_List.txt