Jump to content
  1. TheAutomator

    TheAutomator

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Mo0C0w
      Hey guys!
      I just started working with the GUI yesterday and it has only brought more fun to the Autoit adventure  
      Basically I have a GUI windows that opens and based on the selection of the combo box the button will do something different. This specific scenario I am talking about the Client Update Verification  combo selection. When selected and the button is pressed my second gui window opens. As of now if I only paste comp1 or comp2 by itself it works correctly, but if I paste both, it has a fit.
      What would the correct way to do this be? Any help or examples, would be greatly appreciated! Thank you in advance
       
      #include <ButtonConstants.au3> #include <ComboConstants.au3> #include <GUIConstantsEx.au3> #include <StaticConstants.au3> #include <WindowsConstants.au3> #include <Client_List.au3> #Region ### START Koda GUI section ### Form=c:\users\dnoble\pictures\plexiibox v4.kxf Global $Form1_1 = GUICreate("Plexii", 336, 419, 1548, 586) GUISetBkColor(0xFFFFFF) Global $Pic1 = GUICtrlCreatePic("C:\Users\dnoble\Pictures\plexii.jpg", 41, 0, 252, 268, BitOR($GUI_SS_DEFAULT_PIC,$SS_CENTERIMAGE)) Global $Label2 = GUICtrlCreateLabel("Select Test", 125, 280, 95, 24) GUICtrlSetFont(-1, 12, 800, 0, "MS Sans Serif") Global $Combo2 = GUICtrlCreateCombo("Select Test", 39, 312, 257, 25, BitOR($CBS_DROPDOWN,$CBS_AUTOHSCROLL)) GUICtrlSetData(-1, "Client Update Verification|Bids") GUICtrlSetFont(-1, 12, 400, 0, "MS Sans Serif") Global $Button1 = GUICtrlCreateButton("Proceed", 111, 352, 129, 33) GUICtrlSetFont(-1, 12, 400, 0, "MS Sans Serif") GUISetState(@SW_SHOW) #EndRegion ### END Koda GUI section ### While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE Exit Case $Button1 If GUICtrlRead($Combo2) = "Client Update Verification" Then _Form2() ;clientupdateverification() EndSwitch WEnd Func _Form2() #Region ### START Koda GUI section ### Form=c:\users\dnoble\pictures\plexiiboxclientupdate verification.kxf $Form1_1 = GUICreate("Plexii", 336, 521, 866, 454) GUISetBkColor(0xFFFFFF) $Edit1 = GUICtrlCreateEdit("", 57, 72, 241, 345) GUICtrlSetData(-1, "Edit1") $Button1 = GUICtrlCreateButton("Execute", 95, 440, 145, 41) GUICtrlSetFont(-1, 12, 400, 0, "MS Sans Serif") GUISetState(@SW_SHOW) #EndRegion ### END Koda GUI section ### While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE Exit Case $Button1 If GUICtrlRead($Edit1) = "comp1" Then comp1() If GUICtrlRead($Edit1) = "comp2" Then comp2() EndSwitch WEnd EndFunc  

    • By mike1950r
      Hi,
      I have a problem with the scrollbar in edit control.
      In my case I use richedit, but it appears also in the "normal" editcontrol.
      The problem ONLY appears, when working with my program (including editcontrol) and another program like notpad on the other screen.
      It appears when using the scrollbar of notepad, then my scroll bar and so on ... (vertical scrollbars only)
      and then suddenly the area behind my scrollbar gets highlighted (black) like selected, above and below,
      if i move the mouse to the left during pressing, the whole area behind the scrollbar gets highlighted in black.
      When my program is loaded alone the problem NEVER happens.
      I have made two screenshots, 1st one when the problem appears, and the second one showing when moving to the left.
      I really have no idea and there is nothing special in my editcontrol.
      I would be really thankful, if someone could help me further to get this issue solved.
      thanks in advance
      cheers mike


       
    • By rudi
      Hello,
      very propably this has been asked before, well, I miss the thread(s) ...
      Is there a command line switch to tell the SciTE setup EXE to install silently ("/S") *AND* to end up with "edit" (instead of "run") as system wide default action for *.au3 files?
       

       
      As it can be done with the config tool:
      https://www.autoitscript.com/autoit3/scite/docs/SciTE4AutoIt3/SciTEConfigb1.PNG
       
      Regards, Rudi.
    • By nacerbaaziz
      Hi dears
      How are you?
      I have a question, to you please.
      How do I create an edit box for numbers only and does not accept letters? using autoit
      greetings to all
      I hope you help ME
      Thanks to all in advance
    • By Simpel
      Hi,
      I'm trying to create a console reader. All is working but I have a problem with the look. I want the line numbers with another backgroundcolor in silver. I made this with a small silver label. The edit control over the label has a transparent background.
      But if I start the prog then i can see how the line numbers wipe the silver background off. And if I click into the Edit then the silver label disappears completely.
      #include <WindowsConstants.au3> #include <GUIConstantsEx.au3> #include <ColorConstants.au3> #include <StaticConstants.au3> #include <GuiEdit.au3> Opt("GUIOnEventMode", 1) Global $g_iZaehler = 0 Global $g_hGUI = GUICreate("Console: StdoutRead" , 800, 800, -1, -1, $WS_OVERLAPPEDWINDOW + $WS_CLIPCHILDREN, $WS_EX_ACCEPTFILES) GUISetOnEvent($GUI_EVENT_CLOSE, "_Exit") Global $text = GUICtrlCreateEdit("",10,30,780,760, $ES_AUTOVSCROLL + $WS_VSCROLL + $ES_READONLY + $ES_NOHIDESEL) GUICtrlSetState(-1, $GUI_DROPACCEPTED) GUICtrlSetFont(-1, 9, -1, -1, "Lucida Console") GUICtrlSetResizing(-1, $GUI_DOCKBORDERS) GUICtrlSetBkColor(-1, $GUI_BKCOLOR_TRANSPARENT) Global $g_LaZeilen = GUICtrlCreateLabel("Zeilen: " & StringFormat("% 5d", $g_iZaehler), 680, 10, 100, 9, $SS_LEFTNOWORDWRAP) GUICtrlSetFont(-1, 9, -1, -1, "Lucida Console") GUICtrlSetResizing(-1, $GUI_DOCKRIGHT + $GUI_DOCKTOP + $GUI_DOCKSIZE) Global $g_hCbFreeze = GUICtrlCreateCheckbox("&Freeze", 13, 5, 90) GUICtrlSetFont(-1, 9, -1, -1, "Lucida Console") GUICtrlSetResizing(-1, $GUI_DOCKALL) GUICtrlCreateLabel("", 11, 31, 42, 758) ; soll die Ziffern andersfarbig hinterlegen GUICtrlSetBkColor(-1, $COLOR_SILVER) GUICtrlSetResizing(-1, $GUI_DOCKLEFT + $GUI_DOCKTOP + $GUI_DOCKBOTTOM + $GUI_DOCKWIDTH) GUISetState(@SW_SHOW) Global $sText = StringFormat("% 5d", $g_iZaehler) & @CRLF _GUICtrlEdit_AppendText($text, $sText) While 1 Sleep(200) $g_iZaehler += 1 $sText = StringFormat("% 5d", $g_iZaehler) & @CRLF _GUICtrlEdit_AppendText($text, $sText) WEnd Func _Exit() Exit EndFunc Do you have any suggestions.
      Regards, Conrad
×
×
  • Create New...