Jump to content
  1. Mungo

    Mungo

  2. mLipok

    mLipok

  3. mesale0077

    mesale0077

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By UEZ
      I'm searching for a way to set an icon for a system menu entry in the console window. I can add / remove entries but I didn't find a way to set an icon for the entry I made.
      Example:
      #AutoIt3Wrapper_Change2CUI=y #include <GDIPlus.au3> #include <GUIConstantsEx.au3> #include <GuiMenu.au3> #include <WindowsConstants.au3> Global $id_Test = 5000 Global $hConsole = HWnd(DllCall("kernel32.dll", "hwnd", "GetConsoleWindow")[0]) If Not $hConsole Then Exit HotKeySet("{ESC}", "_Exit") Global $hSysmenu = _GUICtrlMenu_GetSystemMenu($hConsole) Global $iCount = _GUICtrlMenu_GetItemCount ($hSysmenu) _GUICtrlMenu_InsertMenuItem($hSysmenu, $iCount, "Test", $id_Test) _GDIPlus_Startup() $hBitmap_GDI = _GDIPlus_BitmapCreateFromMemory(_Test(), True) ConsoleWrite('@@ Debug(' & @ScriptLineNumber & ') : $hBitmap_GDI = ' & $hBitmap_GDI & @CRLF & '>Error code: ' & @error & @CRLF) ;### Debug Console $hBmp1 = _WinAPI_CreateSolidBitmap($hConsole, 0xFF0000, 16, 16) ConsoleWrite('@@ Debug(' & @ScriptLineNumber & ') : $hBmp1 = ' & $hBmp1 & @CRLF & '>Error code: ' & @error & @CRLF) ;### Debug Console $hBmp2 = _WinAPI_CreateSolidBitmap($hConsole, 0x00FF00, 16, 16) ConsoleWrite('@@ Debug(' & @ScriptLineNumber & ') : $hBmp2 = ' & $hBmp2 & @CRLF & '>Error code: ' & @error & @CRLF) ;### Debug Console ;ConsoleWrite(_GUICtrlMenu_SetItemBmp($hSysmenu, $id_Test, $hBitmap_GDI, False) & @CRLF) ConsoleWrite(_GUICtrlMenu_SetItemBitmaps($hSysmenu, $id_Test, $hBmp1, $hBmp2, False) & ", " & @error & @CRLF) ;_GUICtrlMenu_SetItemBmp($hSysmenu, $id_Test, 8, False) ;set the default close icon _GDIPlus_Shutdown() Do Sleep(1000) Until False Func _Exit() ConsoleWrite("Bye..." & @CRLF) _GUICtrlMenu_DeleteMenu ($hSysmenu, $id_Test, False) _WinAPI_DeleteObject($hBitmap_GDI) _WinAPI_DeleteObject($hBmp1) _WinAPI_DeleteObject($hBmp2) Exit EndFunc ;Code below was generated by: 'File to Base64 String' Code Generator v1.20 Build 2020-06-05 Func _Test($bSaveBinary = False, $sSavePath = @ScriptDir) Local $Test $Test &= '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' $Test &= 'qdfrRmutJp6e4q+tKsbYs3in7+7r65OhoSE9MzNjkiRBt9ttkiRxjTHkcjl3bGxMPYhjSdP0rLvdLt1uF9d1BcDzPHdyclL0yspKuLGxcT0IgkeKxaINgsADXBFxAefEQB4ImNT3/W4Yhk6z2awtLy9H/wPnrsNEnFPl4QAAAABJRU5ErkJggg==' Local $bString = _WinAPI_Base64Decode($Test) If @error Then Return SetError(1, 0, 0) $bString = Binary($bString) If $bSaveBinary Then Local Const $hFile = FileOpen($sSavePath & "\AutoSave_16x16_04.png", 18) If @error Then Return SetError(2, 0, $bString) FileWrite($hFile, $bString) FileClose($hFile) EndIf Return $bString EndFunc ;==>_Test Func _WinAPI_Base64Decode($sB64String) Local $aCrypt = DllCall("Crypt32.dll", "bool", "CryptStringToBinaryA", "str", $sB64String, "dword", 0, "dword", 1, "ptr", 0, "dword*", 0, "ptr", 0, "ptr", 0) If @error Or Not $aCrypt[0] Then Return SetError(1, 0, "") Local $bBuffer = DllStructCreate("byte[" & $aCrypt[5] & "]") $aCrypt = DllCall("Crypt32.dll", "bool", "CryptStringToBinaryA", "str", $sB64String, "dword", 0, "dword", 1, "struct*", $bBuffer, "dword*", $aCrypt[5], "ptr", 0, "ptr", 0) If @error Or Not $aCrypt[0] Then Return SetError(2, 0, "") Return DllStructGetData($bBuffer, 1) EndFunc ;==>_WinAPI_Base64Decode  
      You must compile and run it to see the menu entry in the console window.

       
      Any idea?
    • By Jemboy
      Recently I was working on a script with icons using GuiCtrkCreatIcon.
      I decided to change the sub folder name of the icons to a more meaning name, however made a typo.

      I tested the .exe on my test computer and it worked flawlessly (because both icon folder where on my test computer) 😁
      But after I installed the script on the intended computers , I got chaos!😵
      Zooming into the problem, I discovered, that because the icons could not be found, the ControlID were returned with a value of 0
      and thus played havoc within the GuiGetMsg() switch/case statement.
      I have been able to reproduce this  (see example)
      #include <GUIConstantsEx.au3> ;============================================================================================================ ; PLEASE, do not save this example in the example folder: C:\Program Files (x86)\AutoIt3\Examples\Helpfile ;============================================================================================================ Example() Func Example() GUICreate(" My GUI Icons", 250, 250) $Icon1 = GUICtrlCreateIcon("shell32.dll", 10, 20, 20) $Icon2 = GUICtrlCreateIcon(@ScriptDir & '\Extras\horse.ani', -1, 20, 40, 32, 32) $Icon3 = GUICtrlCreateIcon("shell32.dll", 7, 20, 75, 32, 32) GUISetState(@SW_SHOW) ;$Icon2 = -1 ; ==> When this line is uncommented the script "works", so -1 could be a potential fix. ; Loop until the user exits. While 1 Switch GUIGetMsg() Case $GUI_EVENT_CLOSE ExitLoop Case $Icon2 Beep (500,500) EndSwitch WEnd GUIDelete() EndFunc ;==>Example If you save the above script outside the Autoit example folder and run it, it will keep beeping because GuiCtrlCreatIcon did not find horse.ani and return $Icon2=0.
      At the moment GUICtrlCreateIcon () only returns the conntrolID on success and 0 on failure.
      I would like to propose a return of -1 on failure, so a existing and working script won't go awry when the icon can not be found.
       
    • By Zobu
      Hey Guys,
      I want to add a new checkbox with its own variable every time the add button is clicked.
      The added checkboxes should remain when I close the window or exit the script and when I reopen I should be able to add new checkboxes aswell.
      here is what I have so far..
      #include <GUIConstantsEx.au3> #include <WindowsConstants.au3> #include <StaticConstants.au3> #include <EditConstants.au3> #include <MsgBoxConstants.au3> #include <GuiButton.au3> $test = GUICreate("adding test", 475, 345, 500, 175) $Check1 = GUICtrlCreateCheckbox("Checkbox 1", 15, 25, 300, 25) $Button = GUICtrlCreateButton("Add", 365, 25, 90, 20) $Check2 = GUICtrlCreateCheckbox("Checkbox 2", 15, 50, 300, 25) $Check3 = GUICtrlCreateCheckbox("Checkbox 3", 15, 75, 300, 25) GUICtrlSetState($Check2, $GUI_HIDE) GUICtrlSetState($Check3, $GUI_HIDE) GUISetState(@SW_SHOW) While 1 Switch GUIGetMsg() Case $GUI_EVENT_CLOSE ; Exit Case $Button GUICtrlSetPos($Check2, 15, 50, 300, 25) GUICtrlSetState($Check2, $GUI_SHOW) Case $Button GUICtrlSetPos($Check3, 15, 75, 300, 25) GUICtrlSetState($Check3, $GUI_SHOW) EndSwitch WEnd  
    • By MarcoMonte
      Hello Everyone,
      Hoping someone can help me,
      I am totally stuck on this problem,

      I cannot reach the textarea and the button in a maps page that I get by clicking on a button in a previus page, the only way I can interact with this is using tab and mouseclick but this is a danger method as  you know.

      I get the handle by using: $Posizione = _IEAttach("Ricerca Indirizzo su mappa")

      then I tried a lot of things but nothing works, can someone give me a hint?
      --------------------
      WinWait("Ricerca Indirizzo su mappa")
      sleep(1000)
      $Posizione = _IEAttach("Ricerca Indirizzo su mappa")
      WinSetState ("Ricerca Indirizzo su mappa", "", @SW_MAXIMIZE  )
      WinActivate("Ricerca Indirizzo su mappa")
      sleep(500)
      ;~ $oForm = _IEFormGetObjByName($Posizione, "form1");Punta il Form
      $oText = _IEFormElementGetObjByName($Posizione,"indirizzo")
      $oText = _IEFormElementGetObjByName($Posizione,"writeAddress")

      ;~ $LenteTestoMess = _IEFormElementGetValue($oText);Inserisce il PrimoRepertorio nella variabile
      ;~ _IELinkClickByText($Posizione, $oForm);Clicca su Aggiorna ed invia il form
      _IEFormElementSetValue ($oText,"via Ravenna 12" );Completamento campo testo
      ----------------------------------------------------
      Mappa.odt Ricerca Indirizzo su mappa.htm
    • By GillesMaisonneuve
      Good morning,
       
      I am trying to align a two-line text in a button so that it would be centered in the button but can't succeed to do it for the vertical part.
      Can someone tell me what I do wrong ?
      Here is my code:
      $btn3 = GUICtrlCreateButton("Execute " & @LF & " file 1", 100, 65, 60, 50, _ BitOr($BS_CENTER,$BS_BOTTOM,$BS_MULTILINE)) and here is the resulting layout I get in my window.
      I tried to follow the help, made a lot of different parameter combinations (here it's `$BS_BOTTOM`, but I tried `$BS_VCENTER` and `$BS_TOP`), still get the same result : vertical alignement is a no go for me.
      Can someone help ?
      TIA
      Gilles

×
×
  • Create New...