Jump to content
Sign in to follow this  
javiwhite

GuiCtrlCreateDate & GUICtrlSetData not working as expected

Recommended Posts

Hi All,

I've run into an issue in one of my scripts using the GUICtrlCreateDate function with the $DTS_TIMEFORMAT flag.

Basically, after the creation of the Date tool, I seem to be unable to set the data in the box; And after reading the function reference for GuiCtrlSetData, This does seem to be something that's supported... So i'm a little lost as to where exactly i'm going wrong.

I've created a quick test script, and still can't get the two functions to work harmoniously:

local $GUI = GuiCreate("",100,40)
local $testDate = GUICtrlCreateDate("",15,10,70,20,9,-1)
local $test = GUIctrlSetData(-1,"09:00:00")
ConsoleWrite($test & @CR)
GUIsetState(@SW_SHOW)
While 1
   switch GUIgetMsg()
      Case -3
        Exit
   EndSwitch
WEnd 

Theoretically, the date input should show 09:00:00, But the GUIctrlSetData seems to be failing (returning 0).

I've checked the format of the Date input by using GUIctrlRead, and have adhered to that format in the test above, but it still seems to be failing.

Any Ideas? Any help is greatly appreciated! :)

Many Thanks

Javi


give a man an application, and he'll be frustrated for the day, Teach him how to program applications and he'll be frustrated for a lifetime.

Share this post


Link to post
Share on other sites

Try this:

local $GUI = GuiCreate("",100,40)
local $testDate = GUICtrlCreateDate("",15,10,70,20,9,-1)
local $test = GUIctrlSetData($testDate,"2015/01/14 09:00:00 AM")
ConsoleWrite($test & @CR)
GUIsetState(@SW_SHOW)
While 1
   switch GUIgetMsg()
      Case -3
        Exit
   EndSwitch
WEnd

:)

EDIT: It just wasn't in the proper date format of YYYY/MM/DD HH:mm:ss.

Edited by MikahS

Snips & Scripts


My Snips: graphCPUTemp ~ getENVvars
My Scripts: Short-Order Encrypter - message and file encryption V1.6.1 ~ AuPad - Notepad written entirely in AutoIt V1.9.4

Feel free to use any of my code for your own use.                                                                                                                                                           Forum FAQ

 

Share this post


Link to post
Share on other sites

Hi Mikah, Thanks for the response!

That works perfectly... I didn't realise that the date had to be specified even though it's not displayed.

I tip my hat to you sir! :D

-Javi


give a man an application, and he'll be frustrated for the day, Teach him how to program applications and he'll be frustrated for a lifetime.

Share this post


Link to post
Share on other sites

Anytime!

My pleasure. ;)


Snips & Scripts


My Snips: graphCPUTemp ~ getENVvars
My Scripts: Short-Order Encrypter - message and file encryption V1.6.1 ~ AuPad - Notepad written entirely in AutoIt V1.9.4

Feel free to use any of my code for your own use.                                                                                                                                                           Forum FAQ

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Similar Content

    • By Inpho
      Hi All,
      I intend on keeping custom functions/UDFs (works in progress) here; if anyone wants to use any code, feel free.
      String functions:
      #AutoIt3Wrapper_AU3Check_Parameters=-d -w- 1 -w 2 -w 3 -w 4 -w 5 -w 6 #include-once ; #FUNCTION# ==================================================================================================================== ; Name ..........: _DateTimeGet ; Description ...: Returns the date and time formatted for use in sortable filenames, logs, listviews, etc. ; Syntax ........: _DateTimeGet(iType = 1[, $bHumanFormat = False]) ; Parameters ....: $iType - [optional] an integer value. Default is 1. ; 1 - Date and time in file-friendly format; 20190115_113756 ; 2 - Date in file-friendly format; 20190115 ; 3 - Time in file friendly format; 113756 ; $bHumanFormat - [optional] a boolean value. Default is False. ; True - Includes slashes in the date and colons in the time with a space inbetween ; False - No slashes or colons included with an underscore inbetween ; Return values .: Success - String ; Failure - Sets @error to non-zero and returns an empty string ; Author ........: Sam Coates ; =============================================================================================================================== Func _DateTimeGet($iType = 1, $bHumanFormat = False) If $iType < 1 Or $iType > 3 Then Return (SetError(-1, 0, "")) ;; Param1: ;; 1 = Date and time in file friendly format: 20190115_113756 ;; 2 = Date in file friendly format: 20190115 ;; 3 = Time in file friendly format: 113756 ;; Param2: ;; True = Use human-readable format: 15/01/2019 11:37:56 Local $sTime = @HOUR & ":" & @MIN & ":" & @SEC Local $sDate = @MDAY & "/" & @MON & "/" & @YEAR If $iType = 1 Then If $bHumanFormat = False Then $sTime = StringReplace($sTime, ":", "") $sDate = StringReplace($sDate, "/", "") $sDate = StringTrimLeft($sDate, 4) & StringMid($sDate, 3, 2) & StringLeft($sDate, 2) Return ($sDate & "_" & $sTime) Else Return ($sDate & " " & $sTime) EndIf ElseIf $iType = 2 Then If $bHumanFormat = False Then $sDate = StringReplace($sDate, "/", "") $sDate = StringTrimLeft($sDate, 4) & StringMid($sDate, 3, 2) & StringLeft($sDate, 2) EndIf Return ($sDate) ElseIf $iType = 3 Then If $bHumanFormat = False Then $sTime = StringReplace($sTime, "/", "") EndIf Return ($sTime) EndIf EndFunc ;==>_DateTimeGet ; #FUNCTION# ==================================================================================================================== ; Name ..........: _FileToFileExtension ; Description ...: Returns a file extension from a filename/FQPN (Fully Qualified Path Name) ; Syntax ........: _FileToFileExtension($sPath) ; Parameters ....: $sPath - a string value. ; Return values .: Success - String ; Failure - Empty string as returned from StringTrimLeft() ; Author ........: Sam Coates ; =============================================================================================================================== Func _FileToFileExtension($sPath) Return (StringTrimLeft($sPath, StringInStr($sPath, ".", 0, -1))) EndFunc ;==>_FileToFileExtension ; #FUNCTION# ==================================================================================================================== ; Name ..........: _FileToFileName ; Description ...: Returns a filename from a FQPN (Fully Qualified Path Name) ; Syntax ........: _FileToFileName($sPath[, $bIncludeExtension = True]) ; Parameters ....: $sPath - a string value. ; $bIncludeExtension - [optional] a boolean value. Default is True. ; Return values .: Success - String ; Failure - Empty string as returned from StringLeft() ; Author ........: Sam Coates ; =============================================================================================================================== Func _FileToFileName($sPath, $bIncludeExtension = True) Local $sReturn = StringTrimLeft($sPath, StringInStr($sPath, "\", 0, -1)) If $bIncludeExtension = False Then $sReturn = StringLeft($sReturn, StringInStr($sReturn, ".", 0, -1) - 1) Return ($sReturn) EndFunc ;==>_FileToFileName ; #FUNCTION# ==================================================================================================================== ; Name ..........: _FileToFilePath ; Description ...: Returns a folder path from a FQPN (Fully Qualified Path Name) ; Syntax ........: _FileToFilePath($sPath) ; Parameters ....: $sPath - a string value. ; Return values .: Success - String ; Failure - Empty string as returned from StringLeft() ; Author ........: Sam Coates ; =============================================================================================================================== Func _FileToFilePath($sPath) Return (StringLeft($sPath, StringInStr($sPath, "\", 0, -1) - 1)) EndFunc ;==>_FileToFilePath ; #FUNCTION# ==================================================================================================================== ; Name ..........: _StringLeft ; Description ...: Searches for a string inside a string, then removes everything on the right of that string ; Syntax ........: _StringLeft($sString, $sRemove[, $iCaseSense = 0, $iOccurrence = 1]) ; Parameters ....: $sString - a string value. The string to search inside. ; $sRemove - a string value. The string to search for. ; $iCaseSense - an integer value. Flag to indicate if the operations should be case sensitive. ; $iOccurrence - an integer value. Which occurrence of the substring to find in the string. Use a ; negative occurrence to search from the right side. ; Return values .: Success - String ; Failure - Empty string as returned from StringLeft() ; Author ........: Sam Coates ; =============================================================================================================================== Func _StringLeft($sString, $sRemove, $iCaseSense = 0, $iOccurrence = 1) Return (StringLeft($sString, StringInStr($sString, $sRemove, $iCaseSense, $iOccurrence) - 1)) EndFunc ;==>_StringLeft ; #FUNCTION# ==================================================================================================================== ; Name ..........: _StringRandom ; Description ...: Returns a string of random characters ; Syntax ........: _StringRandom($iAmount[, $iType = 1]) ; Parameters ....: $iAmount - an integer value. Length of returned string ; $iType - [optional] an integer value. Default is 1. ; 1 - Return digits (0-9) ; 2 - Return hexadecimal (0-9, A - F) ; 3 - Return Alphanumeric upper (0-9, A - Z) ; 4 - Return Alphanumeric (0-9, A - Z, a - z) ; 5 - Return Alpha upper (A - Z) ; 6 - Return Alpha (A - Z, a - z) ; Return values .: Success - String ; Failure - Empty string and @error flag as follows: ; @error : 1 - $iAmount is not a positive integer ; 2 - $iType is out of bounds ; Author ........: Sam Coates ; =============================================================================================================================== Func _StringRandom($iAmount, $iType = 1) If $iAmount < 1 Or IsInt($iAmount) = 0 Then Return (SetError(-1, 0, "")) Local $sString = "" Local $iRandomLow = 1, $iRandomHigh = 62 #Tidy_Off Local Static $aCharId[63] = [0, Chr(48), Chr(49), Chr(50), Chr(51), Chr(52), Chr(53), Chr(54), Chr(55), Chr(56), Chr(57), Chr(65), Chr(66), Chr(67), _ Chr(68), Chr(69), Chr(70), Chr(71), Chr(72), Chr(73), Chr(74), Chr(75), Chr(76), Chr(77), Chr(78), Chr(79), Chr(80), _ Chr(81), Chr(82), Chr(83), Chr(84), Chr(85), Chr(86), Chr(87), Chr(88), Chr(89), Chr(90), Chr(97), Chr(98), Chr(99), _ Chr(100), Chr(101), Chr(102), Chr(103), Chr(104), Chr(105), Chr(106), Chr(107), Chr(108), Chr(109), Chr(110), Chr(111), _ Chr(112), Chr(113), Chr(114), Chr(115), Chr(116), Chr(117), Chr(118), Chr(119), Chr(120), Chr(121), Chr(122)] #Tidy_On If $iType = 1 Then ;; digits: 1 - 10 $iRandomHigh = 10 ElseIf $iType = 2 Then ;; hexadecimal: 1 - 16 $iRandomHigh = 16 ElseIf $iType = 3 Then ;; alnumupper: 1 - 36 $iRandomHigh = 36 ElseIf $iType = 4 Then ;; alnum: 1 - 62 $iRandomHigh = 62 ElseIf $iType = 5 Then ;; alphaupper: 11 - 36 $iRandomLow = 11 $iRandomHigh = 36 ElseIf $iType = 6 Then ;; alpha: 11 = 62 $iRandomLow = 11 $iRandomHigh = 62 Else Return (SetError(-2, 0, "")) EndIf For $i = 1 To $iAmount $sString &= $aCharId[Random($iRandomLow, $iRandomHigh, 1)] ;; append string with corresponding random character from ascii array Next Return ($sString) EndFunc ;==>_StringRandom ; #FUNCTION# ==================================================================================================================== ; Name ..........: _StringTrimLeft ; Description ...: Searches for a string inside a string, then removes everything on the left of that string ; Syntax ........: _StringTrimLeft($sString, $sRemove[, $iCaseSense = 0, $iOccurrence = 1]) ; Parameters ....: $sString - a string value. The string to search inside. ; $sRemove - a string value. The string to search for. ; $iCaseSense - an integer value. Flag to indicate if the operations should be case sensitive. ; $iOccurrence - an integer value. Which occurrence of the substring to find in the string. Use a ; negative occurrence to search from the right side. ; Return values .: Success - String ; Failure - Empty string as returned from StringTrimLeft() ; Author ........: Sam Coates ; =============================================================================================================================== Func _StringTrimLeft($sString, $sRemove, $iCaseSense = 0, $iOccurrence = 1) Return (StringTrimLeft($sString, StringInStr($sString, $sRemove, $iCaseSense, $iOccurrence) + StringLen($sRemove) - 1)) EndFunc ;==>_StringTrimLeft Examples:
      ConsoleWrite(_StringRandom(100, 6) & @CRLF) ConsoleWrite(_StringTrimLeft("C:\Windows\System32\cmd.exe", "C:\Windows\System32\") & @CRLF) ConsoleWrite(_StringLeft("C:\Windows\System32\cmd.exe", "cmd.exe") & @CRLF) ConsoleWrite(_FileToFileName("C:\Windows\System32\cmd.exe") & @CRLF) ConsoleWrite(_FileToFilePath("C:\Windows\System32\cmd.exe") & @CRLF) ConsoleWrite(_FileToFileExtension("C:\Windows\System32\cmd.exe") & @CRLF) ConsoleWrite(_StringRandom(6, 4) & "-" & _StringRandom(4, 4) & "-" & _StringRandom(4, 4) & "-" & _StringRandom(4, 4) & "-" & _StringRandom(6, 4)& @CRLF)  
    • By Simpel
      Hi,
      I wanted to use _GetLogonTime() by guinness (https://www.autoitscript.com/forum/topic/19370-autoit-wrappers/?do=findComment&comment=942069).
      #include <Date.au3> #include <Array.au3> ConsoleWrite(_GetLogonTime() & @LF) Func _GetLogonTime($sUserName = @UserName, $sComputerName = @ComputerName) ; Idea by trancexx: http://www.autoitscript.com/forum/topic/113611-if-isadmin-not-detected-as-admin/ Local $aRet = DllCall("netapi32.dll", "long", "NetUserGetInfo", "wstr", $sComputerName, "wstr", $sUserName, "dword", 11, "ptr*", 0) _ArrayDisplay($aRet) If @error Or $aRet[0] Then Return SetError(1, 0, False) Local $sHours = DllStructGetData(DllStructCreate("ptr;ptr;ptr;ptr;dword;dword;dword;ptr;ptr;dword;dword;dword;dword;ptr;dword;ptr;dword;dword;byte;dword", $aRet[4]), 18) DllCall("netapi32.dll", "long", "NetApiBufferFree", "ptr", $aRet[4]) Return _DateAdd("h", "-" & $sHours, _NowCalc()) EndFunc ;==>_GetLogonTime It always returns false.
      I displayed $aRet:
      [0]|2221
      [1]|mycomputer
      [2]|myuser
      [3]|11
      [4]|0x0000000000000000
      $aRet[4] shouldn't be 0x0000000000000000 right? Any help?
      Regards, Conrad
       
    • By Skeletor
      Hey All,
      I'm trying to set the date using a variable.
      Basically, I set the date into the input box, then I change the input box, say, I change the year.
      Then I set what I typed into the input box into the Date Picker.

      This is a demo code.
      #include <ButtonConstants.au3> ;Start GUI includes #include <EditConstants.au3> #include <StaticConstants.au3> #include <WindowsConstants.au3> #include <DateTimeConstants.au3> #include <GUIConstantsEx.au3> #include <GuiDateTimePicker.au3> #Region ### START Koda GUI section ### Form= $Form1 = GUICreate("Form1", 615, 438, 192, 124) $Date1 = GUICtrlCreateDate("2019/02/02 23:16:26", 80, 64, 186, 21, $DTS_SHORTDATEFORMAT) $Input1 = GUICtrlCreateInput("Input1", 80, 152, 185, 21) $Button1 = GUICtrlCreateButton("Set data", 176, 96, 75, 25) $Button2 = GUICtrlCreateButton("Read from input", 176, 200, 75, 25) GUISetState(@SW_SHOW) #EndRegion ### END Koda GUI section ### While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE Exit Case $Button1 $Read = GUICtrlRead($Date1) GUICtrlSetData($Input1, $Read) MsgBox(-1, "", $Read) Case $Button2 $Read = GUICtrlRead($Input1) $New_date = StringReplace($Read, "/", "") $DAY = StringLeft($New_date, 2) $MON = StringMid($New_date, 4, 3) $YEAR = StringRight($New_date, 4) MsgBox(-1, "", $DAY & $MON & $YEAR) ;_GUICtrlDTP_SetFormat($hWndDate, "yyyy/MM/dd") $DateFormate = ($DAY & " " & $MON & " " & $YEAR) $DTM_SETFORMAT_ = 0x1032 ; $DTM_SETFORMATW GUICtrlSendMsg($Date1, $DateFormate, 0, "MM/dd/yyyy") EndSwitch WEnd  
    • By nooneclose
      I forgot an important and needed aspect of my code. I need to be able to check for people who work every other week. Is it possible to write the dates that they work (every other week) between two date ranges? 
      Example:  Bob Smith has a Start date of 8-26-2018 (that is the date he is hired) And He stops working on 12-12-18 (that's the day he goes on vacation or whatever) However his work shift is every other Saturday from 7:30 AM to 6:00 Pm.  I need to calculate every other Saturday between 8-26-18 and 12-12-18 (is this clear?)
       
      here is the code I have so far. I am just missing this last part:
      ; Step 7 Func SendData() ;******************************************************************************* ; Sends all collected data to the Excel file in correct order for Upload ;******************************************************************************* MsgBox($MB_ICONINFORMATION, "Scheduler_Bot", "Sending Data", 2) ; Loop Counters $LoopCount = 0 $Array_Index = 0 $DayIndex = 0 $dataIndex = 0 ; Counter for the day of the week Local $dCount = 2 ; Counter for the numbers of Ys Local $yesCount = 0 ; Excel Write Counter (VERY IMPORTANT!) Local $EWriteCount = 2 ; Declare the global shift arrays (Sunday - Saturday) Global $ShiftDaySU[100][600] Global $ShiftDayM[100][600] Global $ShiftDayT[100][600] Global $ShiftDayW[100][600] Global $ShiftDayR[100][600] Global $ShiftDayF[100][600] Global $ShiftDayS[100][600] Global $sDates[400] While $Formatted_Names[$dataIndex] <> $Formatted_Names[$IndexRows] ; $LoopCount < $IndexRows $ACounter = 0 ; Array counter ; Gets the Start date from the array $Temp = $StartDate[$Array_Index] $TempStart = StringLeft($Temp, 8) $StartTempYear = StringLeft($TempStart, 4) $StartTempMonth = StringMid($TempStart, 5, 2) $StartTempDay = StringRight($TempStart, 2) ; Gets the End date from the array $Temp = $EndDate[$Array_Index] $TempEnd = StringLeft($Temp, 8) $EndTempYear = StringLeft($TempEnd, 4) $EndTempMonth = StringMid($TempEnd, 5, 2) $EndTempDay = StringRight($TempEnd, 2) ; The starting date (in value form) $sdate = _DateToDayValue($StartTempYear, $StartTempMonth, $StartTempDay) ;_DateToDayValue(2019,1,9) ;ConsoleWrite(@CRLF & "$start date " & $sdate & @CRLF & @CRLF) ; The ending date (in value form) $edate = _DateToDayValue($EndTempYear, $EndTempMonth, $EndTempDay) ;_DateToDayValue(2019,4,9) ;ConsoleWrite(@CRLF & "$end date " & $edate & @CRLF & @CRLF) ; Variables for readability Local $iYear, $iMonth, $iDay ;Stores what day of the week that shift lands on Local $tSU = _Excel_RangeRead($OpenWorkbook, Default, "I" & $dCount) If $tSU = "Y" Then $yesCount = 1 EndIf Local $tM = _Excel_RangeRead($OpenWorkbook, Default, "J" & $dCount) If $tM = "Y" Then $yesCount += 1 EndIf Local $tT = _Excel_RangeRead($OpenWorkbook, Default, "K" & $dCount) If $tT = "Y" Then $yesCount += 1 EndIf Local $tW = _Excel_RangeRead($OpenWorkbook, Default, "L" & $dCount) If $tW = "Y" Then $yesCount += 1 EndIf Local $tR = _Excel_RangeRead($OpenWorkbook, Default, "M" & $dCount) If $tR = "Y" Then $yesCount += 1 EndIf Local $tF = _Excel_RangeRead($OpenWorkbook, Default, "N" & $dCount) If $tF = "Y" Then $yesCount += 1 EndIf Local $tS = _Excel_RangeRead($OpenWorkbook, Default, "O" & $dCount) If $tS = "Y" Then $yesCount += 1 EndIf ConsoleWrite(@CRLF & @CRLF) ConsoleWrite($tSU & @CRLF) ConsoleWrite($tM & @CRLF) ConsoleWrite($tT & @CRLF) ConsoleWrite($tW & @CRLF) ConsoleWrite($tR & @CRLF) ConsoleWrite($tF & @CRLF) ConsoleWrite($tS & @CRLF) ConsoleWrite(@CRLF & @CRLF) ; Check to see if they work every other week Local $rotationWeek = _Excel_RangeRead($OpenWorkbook, Default, "U" & $dCount) If $rotationWeek = "0" Then ; Do nothing Else If $rotationWeek = 1 ; Do something Else ; $rotationWeek = 2 ; Do something EndIf EndIf Local $repeatWeek = _Excel_RangeRead($OpenWorkbook, Default, "V" & $dCount) If $rotationWeek = "0" Then ; Do nothing Else If $rotationWeek = 1 ; Do something Else ; $rotationWeek = 2 ; Do something EndIf EndIf While $yesCount > 0 If $tSU = "Y" Then For $Index = $sdate To $edate _DayValueToDate($Index, $iYear, $iMonth, $iDay) ; Finds the day based on its numerical value (1 = Sunday) If _DateToDayOfWeek($iYear, $iMonth, $iDay) = 1 Then $Temp = $iYear & "-" & $iMonth & "-" & $iDay & "T" & "00" & ":" & "00" & ":" & "00" & ":" & "000" $ShiftDaySU[$ACounter][$DayIndex] = $Temp _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $ShiftDaySU[$ACounter][$DayIndex], "AI" & $EWriteCount) ; Send Name _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $Formatted_Names[$dataIndex], "AA" & $EWriteCount) ; Send Start Time _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $StartTimes[$dataIndex], "AB" & $EWriteCount) ; Send End Time _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $EndTimes[$dataIndex], "AC" & $EWriteCount) ; Send Work Hours _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $HoursWorked[$dataIndex], "AD" & $EWriteCount) ; Send Work Group _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $WorkGroup[$dataIndex], "AE" & $EWriteCount) ; Send Department _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $WorkDepartment, "AF" & $EWriteCount) ; Send Supervisor _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $Supervisors[$dataIndex], "AG" & $EWriteCount) ; Send Notes _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $WorkNotes[$dataIndex], "AH" & $EWriteCount) ; Send Shift Number $tempStime = StringReplace($StartTimes[$dataIndex], ":", "") $tempEtime = StringReplace($EndTimes[$dataIndex], ":", "") _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, "SU " & $tempStime & "-" & $tempEtime, "AJ" & $EWriteCount) $ACounter += 1 $EWriteCount += 1 ConsoleWrite(@CRLF & "Sunday " & $Temp & @CRLF) EndIf Next $yesCount -= 1 $tSU = "N" ElseIf $tM = "Y" Then For $Index = $sdate To $edate _DayValueToDate($Index, $iYear, $iMonth, $iDay) ; Finds the day based on its numerical value (1 = Sunday) If _DateToDayOfWeek($iYear, $iMonth, $iDay) = 2 Then $Temp = $iYear & "-" & $iMonth & "-" & $iDay & "T" & "00" & ":" & "00" & ":" & "00" & ":" & "000" $ShiftDayM[$ACounter][$DayIndex] = $Temp _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $ShiftDayM[$ACounter][$DayIndex], "AI" & $EWriteCount) ; Send Name _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $Formatted_Names[$dataIndex], "AA" & $EWriteCount) ; Send Start Time _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $StartTimes[$dataIndex], "AB" & $EWriteCount) ; Send End Time _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $EndTimes[$dataIndex], "AC" & $EWriteCount) ; Send Work Hours _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $HoursWorked[$dataIndex], "AD" & $EWriteCount) ; Send Work Group _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $WorkGroup[$dataIndex], "AE" & $EWriteCount) ; Send Department _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $WorkDepartment, "AF" & $EWriteCount) ; Send Supervisor _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $Supervisors[$dataIndex], "AG" & $EWriteCount) ; Send Notes _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $WorkNotes[$dataIndex], "AH" & $EWriteCount) ; Send Shift Number $tempStime = StringReplace($StartTimes[$dataIndex], ":", "") $tempEtime = StringReplace($EndTimes[$dataIndex], ":", "") _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, "M " & $tempStime & "-" & $tempEtime, "AJ" & $EWriteCount) $ACounter += 1 $EWriteCount += 1 ConsoleWrite(@CRLF & "Monday " & $Temp & @CRLF) EndIf Next $yesCount -= 1 $tM = "N" ElseIf $tT = "Y" Then For $Index = $sdate To $edate _DayValueToDate($Index, $iYear, $iMonth, $iDay) ; Finds the day based on its numerical value (1 = Sunday) If _DateToDayOfWeek($iYear, $iMonth, $iDay) = 3 Then $Temp = $iYear & "-" & $iMonth & "-" & $iDay & "T" & "00" & ":" & "00" & ":" & "00" & ":" & "000" $ShiftDayT[$ACounter][$DayIndex] = $Temp _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $ShiftDayT[$ACounter][$DayIndex], "AI" & $EWriteCount) ; Send Name _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $Formatted_Names[$dataIndex], "AA" & $EWriteCount) ; Send Start Time _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $StartTimes[$dataIndex], "AB" & $EWriteCount) ; Send End Time _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $EndTimes[$dataIndex], "AC" & $EWriteCount) ; Send Work Hours _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $HoursWorked[$dataIndex], "AD" & $EWriteCount) ; Send Work Group _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $WorkGroup[$dataIndex], "AE" & $EWriteCount) ; Send Department _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $WorkDepartment, "AF" & $EWriteCount) ; Send Supervisor _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $Supervisors[$dataIndex], "AG" & $EWriteCount) ; Send Notes _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $WorkNotes[$dataIndex], "AH" & $EWriteCount) ; Send Shift Number $tempStime = StringReplace($StartTimes[$dataIndex], ":", "") $tempEtime = StringReplace($EndTimes[$dataIndex], ":", "") _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, "T " & $tempStime & "-" & $tempEtime, "AJ" & $EWriteCount) $ACounter += 1 $EWriteCount += 1 ConsoleWrite(@CRLF & "Tuesday " & $Temp & @CRLF) EndIf Next $yesCount -= 1 $tT = "N" ElseIf $tW = "Y" Then For $Index = $sdate To $edate _DayValueToDate($Index, $iYear, $iMonth, $iDay) ; Finds the day based on its numerical value (1 = Sunday) If _DateToDayOfWeek($iYear, $iMonth, $iDay) = 4 Then $Temp = $iYear & "-" & $iMonth & "-" & $iDay & "T" & "00" & ":" & "00" & ":" & "00" & ":" & "000" $ShiftDayW[$ACounter][$DayIndex] = $Temp _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $ShiftDayW[$ACounter][$DayIndex], "AI" & $EWriteCount) ; Send Name _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $Formatted_Names[$dataIndex], "AA" & $EWriteCount) ; Send Start Time _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $StartTimes[$dataIndex], "AB" & $EWriteCount) ; Send End Time _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $EndTimes[$dataIndex], "AC" & $EWriteCount) ; Send Work Hours _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $HoursWorked[$dataIndex], "AD" & $EWriteCount) ; Send Work Group _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $WorkGroup[$dataIndex], "AE" & $EWriteCount) ; Send Department _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $WorkDepartment, "AF" & $EWriteCount) ; Send Supervisor _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $Supervisors[$dataIndex], "AG" & $EWriteCount) ; Send Notes _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $WorkNotes[$dataIndex], "AH" & $EWriteCount) ; Send Shift Number $tempStime = StringReplace($StartTimes[$dataIndex], ":", "") $tempEtime = StringReplace($EndTimes[$dataIndex], ":", "") _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, "W " & $tempStime & "-" & $tempEtime, "AJ" & $EWriteCount) $ACounter += 1 $EWriteCount += 1 ConsoleWrite(@CRLF & "Wednesday " & $Temp & @CRLF) EndIf Next $yesCount -= 1 $tW = "N" ElseIf $tR = "Y" Then For $Index = $sdate To $edate _DayValueToDate($Index, $iYear, $iMonth, $iDay) ; Finds the day based on its numerical value (1 = Sunday) If _DateToDayOfWeek($iYear, $iMonth, $iDay) = 5 Then $Temp = $iYear & "-" & $iMonth & "-" & $iDay & "T" & "00" & ":" & "00" & ":" & "00" & ":" & "000" $ShiftDayR[$ACounter][$DayIndex] = $Temp _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $ShiftDayR[$ACounter][$DayIndex], "AI" & $EWriteCount) ; Send Name _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $Formatted_Names[$dataIndex], "AA" & $EWriteCount) ; Send Start Time _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $StartTimes[$dataIndex], "AB" & $EWriteCount) ; Send End Time _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $EndTimes[$dataIndex], "AC" & $EWriteCount) ; Send Work Hours _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $HoursWorked[$dataIndex], "AD" & $EWriteCount) ; Send Work Group _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $WorkGroup[$dataIndex], "AE" & $EWriteCount) ; Send Department _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $WorkDepartment, "AF" & $EWriteCount) ; Send Supervisor _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $Supervisors[$dataIndex], "AG" & $EWriteCount) ; Send Notes _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $WorkNotes[$dataIndex], "AH" & $EWriteCount) ; Send Shift Number $tempStime = StringReplace($StartTimes[$dataIndex], ":", "") $tempEtime = StringReplace($EndTimes[$dataIndex], ":", "") _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, "R " & $tempStime & "-" & $tempEtime, "AJ" & $EWriteCount) $ACounter += 1 $EWriteCount += 1 ConsoleWrite(@CRLF & "Thursday " & $Temp & @CRLF) EndIf Next $yesCount -= 1 $tR = "N" ElseIf $tF = "Y" Then For $Index = $sdate To $edate _DayValueToDate($Index, $iYear, $iMonth, $iDay) ; Finds the day based on its numerical value (1 = Sunday) If _DateToDayOfWeek($iYear, $iMonth, $iDay) = 6 Then $Temp = $iYear & "-" & $iMonth & "-" & $iDay & "T" & "00" & ":" & "00" & ":" & "00" & ":" & "000" $ShiftDayF[$ACounter][$DayIndex] = $Temp _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $ShiftDayF[$ACounter][$DayIndex], "AI" & $EWriteCount) ; Send Name _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $Formatted_Names[$dataIndex], "AA" & $EWriteCount) ; Send Start Time _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $StartTimes[$dataIndex], "AB" & $EWriteCount) ; Send End Time _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $EndTimes[$dataIndex], "AC" & $EWriteCount) ; Send Work Hours _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $HoursWorked[$dataIndex], "AD" & $EWriteCount) ; Send Work Group _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $WorkGroup[$dataIndex], "AE" & $EWriteCount) ; Send Department _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $WorkDepartment, "AF" & $EWriteCount) ; Send Supervisor _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $Supervisors[$dataIndex], "AG" & $EWriteCount) ; Send Notes _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $WorkNotes[$dataIndex], "AH" & $EWriteCount) ; Send Shift Number $tempStime = StringReplace($StartTimes[$dataIndex], ":", "") $tempEtime = StringReplace($EndTimes[$dataIndex], ":", "") _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, "F " & $tempStime & "-" & $tempEtime, "AJ" & $EWriteCount) $ACounter += 1 $EWriteCount += 1 ConsoleWrite(@CRLF & "Friday " & $Temp & @CRLF) EndIf Next $yesCount -= 1 $tF = "N" ElseIf $tS = "Y" Then For $Index = $sdate To $edate _DayValueToDate($Index, $iYear, $iMonth, $iDay) ; Finds the day based on its numerical value (1 = Sunday) If _DateToDayOfWeek($iYear, $iMonth, $iDay) = 7 Then $Temp = $iYear & "-" & $iMonth & "-" & $iDay & "T" & "00" & ":" & "00" & ":" & "00" & ":" & "000" $ShiftDayS[$ACounter][$DayIndex] = $Temp _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $ShiftDayS[$ACounter][$DayIndex], "AI" & $EWriteCount) ; Send Name _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $Formatted_Names[$dataIndex], "AA" & $EWriteCount) ; Send Start Time _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $StartTimes[$dataIndex], "AB" & $EWriteCount) ; Send End Time _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $EndTimes[$dataIndex], "AC" & $EWriteCount) ; Send Work Hours _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $HoursWorked[$dataIndex], "AD" & $EWriteCount) ; Send Work Group _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $WorkGroup[$dataIndex], "AE" & $EWriteCount) ; Send Department _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $WorkDepartment, "AF" & $EWriteCount) ; Send Supervisor _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $Supervisors[$dataIndex], "AG" & $EWriteCount) ; Send Notes _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $WorkNotes[$dataIndex], "AH" & $EWriteCount) ; Send Shift Number $tempStime = StringReplace($StartTimes[$dataIndex], ":", "") $tempEtime = StringReplace($EndTimes[$dataIndex], ":", "") _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, "S " & $tempStime & "-" & $tempEtime, "AJ" & $EWriteCount) $ACounter += 1 $EWriteCount += 1 ConsoleWrite(@CRLF & "Saturday " & $Temp & @CRLF) EndIf Next $yesCount -= 1 $tS = "N" Else ;Error Nothing equals "Y" ConsoleWrite(@CRLF & "Error Nothing equals 'Y'" & @CRLF) EndIf $DayIndex += 1 $LoopCount += 1 WEnd $Array_Index += 1 $dataIndex += 1 $dCount += 1 WEnd MsgBox($MB_ICONINFORMATION, "Scheduler_Bot", "Finished Sending Data", 2) EndFunc  
    • By nooneclose
      Is it possible to use Autoit to find every Monday within a date range? An example would be I want to find every Monday between 1/9/19 through 4/9/19. Then Autoit would give me all the dates on which Monday lands between those two dates. 
      Sorry but I don't have any code so far. I was wondering if it was even possible. I read the help file and I didn't see a function that could do that. 
×
×
  • Create New...